include/configs/apalis-imx8.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2019-2021 Toradex
   4  */
   5
   6 #ifndef __APALIS_IMX8_H
   7 #define __APALIS_IMX8_H
   8
   9 #include <asm/arch/imx-regs.h>
  10 #include <linux/sizes.h>
  11
  12 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  13 #define USDHC1_BASE_ADDR                0x5b010000
  14 #define USDHC2_BASE_ADDR                0x5b020000
  15
  16 /* Networking */
  17 #define CONFIG_IPADDR                   192.168.10.2
  18 #define CONFIG_NETMASK                  255.255.255.0
  19 #define CONFIG_SERVERIP                 192.168.10.1
  20
  21 #define MEM_LAYOUT_ENV_SETTINGS \
  22         "fdt_addr_r=0x84000000\0" \
  23         "kernel_addr_r=0x82000000\0" \
  24         "ramdisk_addr_r=0x94400000\0" \
  25         "scriptaddr=0x87000000\0"
  26
  27 #define BOOT_TARGET_DEVICES(func) \
  28         func(MMC, mmc, 1) \
  29         func(MMC, mmc, 2) \
  30         func(MMC, mmc, 0) \
  31         func(DHCP, dhcp, na)
  32 #include <config_distro_bootcmd.h>
  33 #undef BOOTENV_RUN_NET_USB_START
  34 #define BOOTENV_RUN_NET_USB_START ""
  35
  36 /* Initial environment variables */
  37 #define CONFIG_EXTRA_ENV_SETTINGS \
  38         BOOTENV \
  39         MEM_LAYOUT_ENV_SETTINGS \
  40         "boot_file=Image\0" \
  41         "boot_script_dhcp=boot.scr\0" \
  42         "console=ttyLP1 earlycon\0" \
  43         "fdt_addr=0x83000000\0" \
  44         "fdt_file=fsl-imx8qm-apalis-eval.dtb\0" \
  45         "fdtfile=fsl-imx8qm-apalis-eval.dtb\0" \
  46         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  47         "initrd_addr=0x83800000\0" \
  48         "initrd_high=0xffffffffffffffff\0" \
  49         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  50                 "root=PARTUUID=${uuid} rootwait " \
  51         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  52         "mmcpart=1\0" \
  53         "panel=NULL\0" \
  54         "script=boot.scr\0" \
  55         "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
  56                 "if test \"$confirm\" = \"y\"; then " \
  57                 "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
  58                 "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
  59                 "${blkcnt}; fi\0"
  60
  61 /* Link Definitions */
  62
  63 /* On Apalis iMX8 USDHC1 is eMMC, USDHC2 is 8-bit and USDHC3 is 4-bit MMC/SD */
  64 #define CONFIG_SYS_FSL_USDHC_NUM        3
  65
  66 #define CONFIG_SYS_BOOTM_LEN            SZ_64M /* Increase max gunzip size */
  67
  68 #define CONFIG_SYS_SDRAM_BASE           0x80000000
  69 #define PHYS_SDRAM_1                    0x80000000
  70 #define PHYS_SDRAM_2                    0x880000000
  71 #define PHYS_SDRAM_1_SIZE               SZ_2G           /* 2 GB */
  72 #define PHYS_SDRAM_2_SIZE               SZ_2G           /* 2 GB */
  73
  74 #endif /* __APALIS_IMX8_H */