include/configs/am3517_crane.h

   1 /*
   2  * am3517_crane.h - Default configuration for AM3517 CraneBoard.
   3  *
   4  * Author: Srinath.R <srinath@mistralsolutions.com>
   5  *
   6  * Based on include/configs/am3517evm.h
   7  *
   8  * Copyright (C) 2011 Mistral Solutions pvt Ltd
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_EMIF4    /* The chip has EMIF4 controller */
  20
  21 #include <asm/arch/cpu.h>               /* get chip and board defs */
  22 #include <asm/arch/omap.h>
  23
  24 /* Clock Defines */
  25 #define V_OSCK                  26000000        /* Clock output from T2 */
  26 #define V_SCLK                  (V_OSCK >> 1)
  27
  28 #define CONFIG_MISC_INIT_R
  29
  30 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
  31 #define CONFIG_SETUP_MEMORY_TAGS        1
  32 #define CONFIG_INITRD_TAG               1
  33 #define CONFIG_REVISION_TAG             1
  34
  35 /*
  36  * Size of malloc() pool
  37  */
  38 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
  39 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
  40                                                 /* initial data */
  41 /*
  42  * DDR related
  43  */
  44 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
  45
  46 /*
  47  * Hardware drivers
  48  */
  49
  50 /*
  51  * NS16550 Configuration
  52  */
  53 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  54
  55 #define CONFIG_SYS_NS16550_SERIAL
  56 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  57 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  58
  59 /*
  60  * select serial console configuration
  61  */
  62 #define CONFIG_CONS_INDEX               3
  63 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  64 #define CONFIG_SERIAL3                  3       /* UART3 on CRANEBOARD */
  65
  66 /* allow to overwrite serial and ethaddr */
  67 #define CONFIG_ENV_OVERWRITE
  68 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  69                                         115200}
  70
  71 /*
  72  * USB configuration
  73  * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
  74  * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
  75  */
  76 #define CONFIG_USB_AM35X                1
  77 #define CONFIG_USB_MUSB_HCD                     1
  78
  79 #ifdef CONFIG_USB_AM35X
  80
  81 #ifdef CONFIG_USB_MUSB_HCD
  82
  83 #ifdef CONFIG_USB_KEYBOARD
  84 #define CONFIG_PREBOOT "usb start"
  85 #endif /* CONFIG_USB_KEYBOARD */
  86
  87 #endif /* CONFIG_USB_MUSB_HCD */
  88
  89 #ifdef CONFIG_USB_MUSB_UDC
  90 /* USB device configuration */
  91 #define CONFIG_USB_DEVICE               1
  92 #define CONFIG_USB_TTY                  1
  93 /* Change these to suit your needs */
  94 #define CONFIG_USBD_VENDORID            0x0451
  95 #define CONFIG_USBD_PRODUCTID           0x5678
  96 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  97 #define CONFIG_USBD_PRODUCT_NAME        "AM3517CRANE"
  98 #endif /* CONFIG_USB_MUSB_UDC */
  99
 100 #endif /* CONFIG_USB_AM35X */
 101
 102 #define CONFIG_SYS_I2C
 103 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 104 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 105
 106 /*
 107  * Board NAND Info.
 108  */
 109 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 110                                                         /* to access nand */
 111 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 112                                                         /* to access */
 113                                                         /* nand at CS0 */
 114
 115 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
 116                                                         /* NAND devices */
 117
 118 #define CONFIG_JFFS2_NAND
 119 /* nand device jffs2 lives on */
 120 #define CONFIG_JFFS2_DEV                "nand0"
 121 /* start of jffs2 partition */
 122 #define CONFIG_JFFS2_PART_OFFSET        0x680000
 123 #define CONFIG_JFFS2_PART_SIZE          0xf980000       /* sz of jffs2 part */
 124
 125 /* Environment information */
 126
 127 #define CONFIG_BOOTFILE         "uImage"
 128
 129 #define CONFIG_EXTRA_ENV_SETTINGS \
 130         "loadaddr=0x82000000\0" \
 131         "console=ttyS2,115200n8\0" \
 132         "mmcdev=0\0" \
 133         "mmcargs=setenv bootargs console=${console} " \
 134                 "root=/dev/mmcblk0p2 rw " \
 135                 "rootfstype=ext3 rootwait\0" \
 136         "nandargs=setenv bootargs console=${console} " \
 137                 "root=/dev/mtdblock4 rw " \
 138                 "rootfstype=jffs2\0" \
 139         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 140         "bootscript=echo Running bootscript from mmc ...; " \
 141                 "source ${loadaddr}\0" \
 142         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 143         "mmcboot=echo Booting from mmc ...; " \
 144                 "run mmcargs; " \
 145                 "bootm ${loadaddr}\0" \
 146         "nandboot=echo Booting from nand ...; " \
 147                 "run nandargs; " \
 148                 "nand read ${loadaddr} 280000 400000; " \
 149                 "bootm ${loadaddr}\0" \
 150
 151 #define CONFIG_BOOTCOMMAND \
 152         "mmc dev ${mmcdev}; if mmc rescan; then " \
 153                 "if run loadbootscript; then " \
 154                         "run bootscript; " \
 155                 "else " \
 156                         "if run loaduimage; then " \
 157                                 "run mmcboot; " \
 158                         "else run nandboot; " \
 159                         "fi; " \
 160                 "fi; " \
 161         "else run nandboot; fi"
 162
 163 #define CONFIG_AUTO_COMPLETE    1
 164 /*
 165  * Miscellaneous configurable options
 166  */
 167 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 168 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 169 #define CONFIG_SYS_MAXARGS              32      /* max number of command */
 170                                                 /* args */
 171 /* Boot Argument Buffer Size */
 172 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 173 /* memtest works on */
 174 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 175 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 176                                         0x01F00000) /* 31MB */
 177
 178 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
 179                                                                 /* address */
 180
 181 /*
 182  * AM3517 has 12 GP timers, they can be driven by the system clock
 183  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 184  * This rate is divided by a local divisor.
 185  */
 186 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
 187 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 188
 189 /*-----------------------------------------------------------------------
 190  * Physical Memory Map
 191  */
 192 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 193 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 194 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 195
 196 /*-----------------------------------------------------------------------
 197  * FLASH and environment organization
 198  */
 199
 200 /* **** PISMO SUPPORT *** */
 201 #define CONFIG_SYS_MAX_FLASH_SECT       520     /* max number of sectors */
 202                                                 /* on one chip */
 203 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of flash banks */
 204 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 205
 206 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 207
 208 /* Monitor at start of flash */
 209 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 210
 211 #define CONFIG_NAND_OMAP_GPMC
 212 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 213
 214 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB sector */
 215 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 216 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 217
 218 /*-----------------------------------------------------------------------
 219  * CFI FLASH driver setup
 220  */
 221 /* timeout values are in ticks */
 222 #define CONFIG_SYS_FLASH_ERASE_TOUT     (100 * CONFIG_SYS_HZ)
 223 #define CONFIG_SYS_FLASH_WRITE_TOUT     (100 * CONFIG_SYS_HZ)
 224
 225 /* Flash banks JFFS2 should use */
 226 #define CONFIG_SYS_MAX_MTD_BANKS        (CONFIG_SYS_MAX_FLASH_BANKS + \
 227                                         CONFIG_SYS_MAX_NAND_DEVICE)
 228 #define CONFIG_SYS_JFFS2_MEM_NAND
 229 /* use flash_info[2] */
 230 #define CONFIG_SYS_JFFS2_FIRST_BANK     CONFIG_SYS_MAX_FLASH_BANKS
 231 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
 232
 233 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 234 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 235 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 236 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 237                                          CONFIG_SYS_INIT_RAM_SIZE - \
 238                                          GENERATED_GBL_DATA_SIZE)
 239
 240 /* Defines for SPL */
 241 #define CONFIG_SPL_FRAMEWORK
 242 #define CONFIG_SPL_NAND_SIMPLE
 243 #define CONFIG_SPL_TEXT_BASE            0x40200800
 244 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 245                                          CONFIG_SPL_TEXT_BASE)
 246
 247 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 248 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 249
 250 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 251 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 252
 253 #define CONFIG_SPL_NAND_BASE
 254 #define CONFIG_SPL_NAND_DRIVERS
 255 #define CONFIG_SPL_NAND_ECC
 256
 257 /* NAND boot config */
 258 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 259 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 260 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 261 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 262 #define CONFIG_SYS_NAND_OOBSIZE         64
 263 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 264 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 265 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
 266                                                 10, 11, 12, 13}
 267 #define CONFIG_SYS_NAND_ECCSIZE         512
 268 #define CONFIG_SYS_NAND_ECCBYTES        3
 269 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 270 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 271 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 272
 273 /*
 274  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 275  * 64 bytes before this address should be set aside for u-boot.img's
 276  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 277  * other needs.
 278  */
 279 #define CONFIG_SYS_TEXT_BASE            0x80100000
 280 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 281 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 282
 283 #endif /* __CONFIG_H */