include/configs/advantech_dms-ba16.h

   1 /*
   2  * Copyright (C) 2016 Timesys Corporation
   3  * Copyright (C) 2016 Advantech Corporation
   4  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __ADVANTECH_DMSBA16_CONFIG_H
  10 #define __ADVANTECH_DMSBA16_CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <asm/imx-common/gpio.h>
  14
  15 #define CONFIG_BOARD_NAME       "Advantech DMS-BA16"
  16
  17 #define CONFIG_MXC_UART_BASE    UART4_BASE
  18 #define CONSOLE_DEV     "ttymxc3"
  19 #define CONFIG_EXTRA_BOOTARGS   "panic=10"
  20
  21 #define CONFIG_BOOT_DIR ""
  22 #define CONFIG_LOADCMD "fatload"
  23 #define CONFIG_RFSPART "2"
  24
  25 #define CONFIG_SUPPORT_EMMC_BOOT
  26
  27 #include "mx6_common.h"
  28 #include <linux/sizes.h>
  29
  30 #define CONFIG_CMDLINE_TAG
  31 #define CONFIG_SETUP_MEMORY_TAGS
  32 #define CONFIG_INITRD_TAG
  33 #define CONFIG_REVISION_TAG
  34 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  35
  36 #define CONFIG_MXC_GPIO
  37 #define CONFIG_MXC_UART
  38
  39 #define CONFIG_CMD_FUSE
  40 #define CONFIG_MXC_OCOTP
  41
  42 /* SATA Configs */
  43 #define CONFIG_CMD_SATA
  44 #define CONFIG_DWC_AHSATA
  45 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  46 #define CONFIG_DWC_AHSATA_PORT_ID       0
  47 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  48 #define CONFIG_LBA48
  49 #define CONFIG_LIBATA
  50
  51 /* MMC Configs */
  52 #define CONFIG_FSL_ESDHC
  53 #define CONFIG_FSL_USDHC
  54 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  55 #define CONFIG_GENERIC_MMC
  56 #define CONFIG_BOUNCE_BUFFER
  57
  58 /* USB Configs */
  59 #define CONFIG_USB_EHCI
  60 #define CONFIG_USB_EHCI_MX6
  61 #define CONFIG_USB_STORAGE
  62 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  63 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  64 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  65 #define CONFIG_MXC_USB_FLAGS    0
  66 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
  67
  68 #define CONFIG_USBD_HS
  69 #define CONFIG_USB_FUNCTION_MASS_STORAGE
  70 #define CONFIG_USB_GADGET_VBUS_DRAW 2
  71
  72 /* Networking Configs */
  73 #define CONFIG_FEC_MXC
  74 #define CONFIG_MII
  75 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  76 #define CONFIG_FEC_XCV_TYPE             RGMII
  77 #define CONFIG_ETHPRIME         "FEC"
  78 #define CONFIG_FEC_MXC_PHYADDR          4
  79 #define CONFIG_PHYLIB
  80 #define CONFIG_PHY_ATHEROS
  81
  82 /* Serial Flash */
  83 #ifdef CONFIG_CMD_SF
  84 #define CONFIG_MXC_SPI
  85 #define CONFIG_SF_DEFAULT_BUS           0
  86 #define CONFIG_SF_DEFAULT_CS            0
  87 #define CONFIG_SF_DEFAULT_SPEED 20000000
  88 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  89 #endif
  90
  91 /* allow to overwrite serial and ethaddr */
  92 #define CONFIG_ENV_OVERWRITE
  93 #define CONFIG_CONS_INDEX       1
  94 #define CONFIG_BAUDRATE 115200
  95
  96 /* Command definition */
  97 #define CONFIG_CMD_BMODE
  98
  99 #define CONFIG_LOADADDR 0x12000000
 100 #define CONFIG_SYS_TEXT_BASE    0x17800000
 101
 102 #define CONFIG_EXTRA_ENV_SETTINGS \
 103         "script=boot.scr\0" \
 104         "image=" CONFIG_BOOT_DIR "/uImage\0" \
 105         "uboot=u-boot.imx\0" \
 106         "fdt_file=" CONFIG_BOOT_DIR "/" CONFIG_DEFAULT_FDT_FILE "\0" \
 107         "fdt_addr=0x18000000\0" \
 108         "boot_fdt=yes\0" \
 109         "ip_dyn=yes\0" \
 110         "console=" CONSOLE_DEV "\0" \
 111         "fdt_high=0xffffffff\0"   \
 112         "initrd_high=0xffffffff\0" \
 113         "sddev=0\0" \
 114         "emmcdev=1\0" \
 115         "partnum=1\0" \
 116         "loadcmd=" CONFIG_LOADCMD "\0" \
 117         "rfspart=" CONFIG_RFSPART "\0" \
 118         "update_sd_firmware=" \
 119                 "if test ${ip_dyn} = yes; then " \
 120                         "setenv get_cmd dhcp; " \
 121                 "else " \
 122                         "setenv get_cmd tftp; " \
 123                 "fi; " \
 124                 "if mmc dev ${mmcdev}; then "   \
 125                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 126                                 "setexpr fw_sz ${filesize} / 0x200; " \
 127                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 128                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 129                         "fi; "  \
 130                 "fi\0" \
 131         "update_sf_uboot=" \
 132                 "if tftp $loadaddr $uboot; then " \
 133                         "sf probe; " \
 134                         "sf erase 0 0xC0000; " \
 135                         "sf write $loadaddr 0x400 $filesize; " \
 136                         "echo 'U-Boot upgraded. Please reset'; " \
 137                 "fi\0" \
 138         "setargs=setenv bootargs console=${console},${baudrate} " \
 139                 "root=/dev/${rootdev} rw rootwait " CONFIG_EXTRA_BOOTARGS "\0" \
 140         "loadbootscript=" \
 141                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${script};\0" \
 142         "bootscript=echo Running bootscript from ${dev}:${devnum}:${partnum};" \
 143                 " source\0" \
 144         "loadimage=" \
 145                 "${loadcmd} ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
 146         "loadfdt=${loadcmd} ${dev} ${devnum}:${partnum} ${fdt_addr} ${fdt_file}\0" \
 147         "tryboot=" \
 148                 "if run loadbootscript; then " \
 149                         "run bootscript; " \
 150                 "else " \
 151                         "if run loadimage; then " \
 152                                 "run doboot; " \
 153                         "fi; " \
 154                 "fi;\0" \
 155         "doboot=echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 156                 "run setargs; " \
 157                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 158                         "if run loadfdt; then " \
 159                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 160                         "else " \
 161                                 "if test ${boot_fdt} = try; then " \
 162                                         "bootm; " \
 163                                 "else " \
 164                                         "echo WARN: Cannot load the DT; " \
 165                                 "fi; " \
 166                         "fi; " \
 167                 "else " \
 168                         "bootm; " \
 169                 "fi;\0" \
 170         "netargs=setenv bootargs console=${console},${baudrate} " \
 171                 "root=/dev/nfs " \
 172                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 173         "netboot=echo Booting from net ...; " \
 174                 "run netargs; " \
 175                 "if test ${ip_dyn} = yes; then " \
 176                         "setenv get_cmd dhcp; " \
 177                 "else " \
 178                         "setenv get_cmd tftp; " \
 179                 "fi; " \
 180                 "${get_cmd} ${image}; " \
 181                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 182                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 183                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 184                         "else " \
 185                                 "if test ${boot_fdt} = try; then " \
 186                                         "bootm; " \
 187                                 "else " \
 188                                         "echo WARN: Cannot load the DT; " \
 189                                 "fi; " \
 190                         "fi; " \
 191                 "else " \
 192                         "bootm; " \
 193                 "fi;\0" \
 194
 195 #define CONFIG_BOOTCOMMAND \
 196         "usb start; " \
 197         "setenv dev usb; " \
 198         "setenv devnum 0; " \
 199         "setenv rootdev sda${rfspart}; " \
 200         "run tryboot; " \
 201         \
 202         "setenv dev mmc; " \
 203         "setenv rootdev mmcblk0p${rfspart}; " \
 204         \
 205         "setenv devnum ${sddev}; " \
 206         "if mmc dev ${devnum}; then " \
 207                 "run tryboot; " \
 208         "fi; " \
 209         \
 210         "setenv devnum ${emmcdev}; " \
 211         "setenv rootdev mmcblk${emmcdev}p${rfspart}; " \
 212         "if mmc dev ${devnum}; then " \
 213                 "run tryboot; " \
 214         "fi; " \
 215         \
 216         "bmode usb; " \
 217
 218 #define CONFIG_ARP_TIMEOUT     200UL
 219
 220 /* Miscellaneous configurable options */
 221 #define CONFIG_SYS_LONGHELP
 222 #define CONFIG_AUTO_COMPLETE
 223
 224 /* Print Buffer Size */
 225 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 226 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 227
 228 #define CONFIG_SYS_MEMTEST_START       0x10000000
 229 #define CONFIG_SYS_MEMTEST_END         0x10010000
 230 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 231
 232 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 233
 234 #define CONFIG_CMDLINE_EDITING
 235 #define CONFIG_STACKSIZE               (128 * 1024)
 236
 237 /* Physical Memory Map */
 238 #define CONFIG_NR_DRAM_BANKS           1
 239 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 240
 241 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 242 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 243 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 244
 245 #define CONFIG_SYS_INIT_SP_OFFSET \
 246         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 247 #define CONFIG_SYS_INIT_SP_ADDR \
 248         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 249
 250 /* FLASH and environment organization */
 251 #define CONFIG_SYS_NO_FLASH
 252
 253 #define CONFIG_ENV_IS_IN_SPI_FLASH
 254 #define CONFIG_ENV_SIZE                 (8 * 1024)
 255 #define CONFIG_ENV_OFFSET               (768 * 1024)
 256 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 257 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 258 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 259 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 260 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 261
 262 #ifndef CONFIG_SYS_DCACHE_OFF
 263 #endif
 264
 265 #define CONFIG_SYS_FSL_USDHC_NUM        3
 266
 267 /* Framebuffer */
 268 #define CONFIG_VIDEO_IPUV3
 269 #define CONFIG_VIDEO_BMP_RLE8
 270 #define CONFIG_SPLASH_SCREEN
 271 #define CONFIG_SPLASH_SCREEN_ALIGN
 272 #define CONFIG_BMP_16BPP
 273 #define CONFIG_VIDEO_LOGO
 274 #define CONFIG_VIDEO_BMP_LOGO
 275 #define CONFIG_IPUV3_CLK                260000000
 276 #define CONFIG_IMX_HDMI
 277 #define CONFIG_IMX_VIDEO_SKIP
 278
 279 #define CONFIG_PWM_IMX
 280 #define CONFIG_IMX6_PWM_PER_CLK         66000000
 281
 282 #undef CONFIG_CMD_PCI
 283 #ifdef CONFIG_CMD_PCI
 284 #define CONFIG_PCI_SCAN_SHOW
 285 #define CONFIG_PCIE_IMX
 286 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 287 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(1, 5)
 288 #endif
 289
 290 /* I2C Configs */
 291 #define CONFIG_SYS_I2C
 292 #define CONFIG_SYS_I2C_MXC
 293 #define CONFIG_SYS_I2C_SPEED            100000
 294 #define CONFIG_SYS_I2C_MXC_I2C1
 295 #define CONFIG_SYS_I2C_MXC_I2C2
 296 #define CONFIG_SYS_I2C_MXC_I2C3
 297
 298 #endif  /* __ADVANTECH_DMSBA16_CONFIG_H */