include/configs/adp-ae3xx.h

   1 /*
   2  * Copyright (C) 2011 Andes Technology Corporation
   3  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
   4  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch-ae3xx/ae3xx.h>
  13
  14 /*
  15  * CPU and Board Configuration Options
  16  */
  17 #define CONFIG_USE_INTERRUPT
  18
  19 #define CONFIG_SKIP_LOWLEVEL_INIT
  20
  21 #define CONFIG_SKIP_TRUNOFF_WATCHDOG
  22
  23 #define CONFIG_CMDLINE_EDITING
  24 #define CONFIG_PANIC_HANG
  25
  26 #define CONFIG_ARCH_MAP_SYSMEM
  27
  28 #define CONFIG_BOOTP_SEND_HOSTNAME
  29 #define CONFIG_BOOTP_SERVERIP
  30
  31 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
  32 #define CONFIG_SYS_TEXT_BASE    0x00500000
  33 #ifdef CONFIG_OF_CONTROL
  34 #undef CONFIG_OF_SEPARATE
  35 #define CONFIG_OF_EMBED
  36 #endif
  37 #else
  38
  39 #define CONFIG_SYS_TEXT_BASE    0x80000000
  40 #endif
  41
  42 /*
  43  * Timer
  44  */
  45 #define CONFIG_SYS_CLK_FREQ     39062500
  46 #define VERSION_CLOCK           CONFIG_SYS_CLK_FREQ
  47
  48 /*
  49  * Use Externel CLOCK or PCLK
  50  */
  51 #undef CONFIG_FTRTC010_EXTCLK
  52
  53 #ifndef CONFIG_FTRTC010_EXTCLK
  54 #define CONFIG_FTRTC010_PCLK
  55 #endif
  56
  57 #ifdef CONFIG_FTRTC010_EXTCLK
  58 #define TIMER_CLOCK     32768                   /* CONFIG_FTRTC010_EXTCLK */
  59 #else
  60 #define TIMER_CLOCK     CONFIG_SYS_HZ           /* CONFIG_FTRTC010_PCLK */
  61 #endif
  62
  63 #define TIMER_LOAD_VAL  0xffffffff
  64
  65 /*
  66  * Real Time Clock
  67  */
  68 #define CONFIG_RTC_FTRTC010
  69
  70 /*
  71  * Real Time Clock Divider
  72  * RTC_DIV_COUNT                        (OSC_CLK/OSC_5MHZ)
  73  */
  74 #define OSC_5MHZ                        (5*1000000)
  75 #define OSC_CLK                         (4*OSC_5MHZ)
  76 #define RTC_DIV_COUNT                   (0.5)   /* Why?? */
  77
  78 /*
  79  * Serial console configuration
  80  */
  81
  82 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
  83 #define CONFIG_CONS_INDEX               1
  84 #define CONFIG_SYS_NS16550_SERIAL
  85 #define CONFIG_SYS_NS16550_COM1         CONFIG_FTUART010_02_BASE
  86 #ifndef CONFIG_DM_SERIAL
  87 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  88 #endif
  89 #define CONFIG_SYS_NS16550_CLK          ((18432000 * 20) / 25)  /* AG101P */
  90
  91 /*
  92  * SD (MMC) controller
  93  */
  94 #define CONFIG_FTSDC010
  95 #define CONFIG_FTSDC010_NUMBER          1
  96 #define CONFIG_FTSDC010_SDIO
  97
  98 /*
  99  * Miscellaneous configurable options
 100  */
 101 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 102
 103 /*
 104  * Size of malloc() pool
 105  */
 106 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
 107 #define CONFIG_SYS_MALLOC_LEN           (512 << 10)
 108
 109 /*
 110  * Physical Memory Map
 111  */
 112 #define PHYS_SDRAM_0    0x00000000  /* SDRAM Bank #1 */
 113
 114 #define PHYS_SDRAM_1 \
 115         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
 116
 117 #define CONFIG_NR_DRAM_BANKS    2               /* we have 2 bank of DRAM */
 118
 119 #define PHYS_SDRAM_0_SIZE       0x20000000      /* 512 MB */
 120 #define PHYS_SDRAM_1_SIZE       0x20000000      /* 512 MB */
 121
 122 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_0
 123
 124 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
 125                                         GENERATED_GBL_DATA_SIZE)
 126
 127 /*
 128  * Load address and memory test area should agree with
 129  * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
 130  */
 131 #define CONFIG_SYS_LOAD_ADDR            0x300000
 132
 133 /* memtest works on 63 MB in DRAM */
 134 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_0
 135 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_0 + 0x03F00000)
 136
 137 /*
 138  * Static memory controller configuration
 139  */
 140 #define CONFIG_FTSMC020
 141
 142 #ifdef CONFIG_FTSMC020
 143 #include <faraday/ftsmc020.h>
 144
 145 #define CONFIG_SYS_FTSMC020_CONFIGS     {                       \
 146         { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
 147         { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
 148 }
 149
 150 #ifndef CONFIG_SKIP_LOWLEVEL_INIT       /* FLASH is on BANK 0 */
 151 #define FTSMC020_BANK0_LOWLV_CONFIG     (FTSMC020_BANK_ENABLE   |       \
 152                                          FTSMC020_BANK_SIZE_32M |       \
 153                                          FTSMC020_BANK_MBW_32)
 154
 155 #define FTSMC020_BANK0_LOWLV_TIMING     (FTSMC020_TPR_RBE       |       \
 156                                          FTSMC020_TPR_AST(1)    |       \
 157                                          FTSMC020_TPR_CTW(1)    |       \
 158                                          FTSMC020_TPR_ATI(1)    |       \
 159                                          FTSMC020_TPR_AT2(1)    |       \
 160                                          FTSMC020_TPR_WTC(1)    |       \
 161                                          FTSMC020_TPR_AHT(1)    |       \
 162                                          FTSMC020_TPR_TRNA(1))
 163 #endif
 164
 165 /*
 166  * FLASH on ADP_AG101P is connected to BANK0
 167  * Just disalbe the other BANK to avoid detection error.
 168  */
 169 #define FTSMC020_BANK0_CONFIG   (FTSMC020_BANK_ENABLE             |     \
 170                                  FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
 171                                  FTSMC020_BANK_SIZE_32M           |     \
 172                                  FTSMC020_BANK_MBW_32)
 173
 174 #define FTSMC020_BANK0_TIMING   (FTSMC020_TPR_AST(3)   |        \
 175                                  FTSMC020_TPR_CTW(3)   |        \
 176                                  FTSMC020_TPR_ATI(0xf) |        \
 177                                  FTSMC020_TPR_AT2(3)   |        \
 178                                  FTSMC020_TPR_WTC(3)   |        \
 179                                  FTSMC020_TPR_AHT(3)   |        \
 180                                  FTSMC020_TPR_TRNA(0xf))
 181
 182 #define FTSMC020_BANK1_CONFIG   (0x00)
 183 #define FTSMC020_BANK1_TIMING   (0x00)
 184 #endif /* CONFIG_FTSMC020 */
 185
 186 /*
 187  * FLASH and environment organization
 188  */
 189 /* use CFI framework */
 190 #define CONFIG_SYS_FLASH_CFI
 191 #define CONFIG_FLASH_CFI_DRIVER
 192
 193 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 194 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 195 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
 196
 197 /* support JEDEC */
 198 #ifdef CONFIG_CFI_FLASH
 199 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT       1
 200 #endif
 201
 202 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
 203 #define PHYS_FLASH_1                    0x88000000      /* BANK 0 */
 204 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_1
 205 #define CONFIG_SYS_FLASH_BANKS_LIST     { PHYS_FLASH_1, }
 206 #define CONFIG_SYS_MONITOR_BASE         PHYS_FLASH_1
 207
 208 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* TO for Flash Erase (ms) */
 209 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* TO for Flash Write (ms) */
 210
 211 /* max number of memory banks */
 212 /*
 213  * There are 4 banks supported for this Controller,
 214  * but we have only 1 bank connected to flash on board
 215  */
 216 #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 217 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 218 #endif
 219 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
 220
 221 /* max number of sectors on one chip */
 222 #define CONFIG_FLASH_SECTOR_SIZE        (0x10000*2)
 223 #define CONFIG_SYS_MAX_FLASH_SECT       512
 224
 225 /* environments */
 226 #define CONFIG_ENV_SPI_BUS              0
 227 #define CONFIG_ENV_SPI_CS               0
 228 #define CONFIG_ENV_SPI_MAX_HZ           50000000
 229 #define CONFIG_ENV_SPI_MODE             0
 230 #define CONFIG_ENV_SECT_SIZE            0x1000
 231 #define CONFIG_ENV_OFFSET               0x140000
 232 #define CONFIG_ENV_SIZE                 8192
 233 #define CONFIG_ENV_OVERWRITE
 234
 235
 236 /* SPI FLASH */
 237 #define CONFIG_SF_DEFAULT_BUS           0
 238 #define CONFIG_SF_DEFAULT_CS            0
 239 #define CONFIG_SF_DEFAULT_SPEED         1000000
 240 #define CONFIG_SF_DEFAULT_MODE          0
 241
 242 /*
 243  * For booting Linux, the board info and command line data
 244  * have to be in the first 16 MB of memory, since this is
 245  * the maximum mapped by the Linux kernel during initialization.
 246  */
 247
 248 /* Initial Memory map for Linux*/
 249 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)
 250 /* Increase max gunzip size */
 251 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)
 252
 253 #endif  /* __CONFIG_H */