include/configs/a3m071.h

   1 /*
   2  * Copyright 2012 Stefan Roese <sr@denx.de>
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  */
  17
  18 #ifndef __CONFIG_H
  19 #define __CONFIG_H
  20
  21 /*
  22  * High Level Configuration Options
  23  * (easy to change)
  24  */
  25
  26 #define CONFIG_MPC5200
  27 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  28 #define CONFIG_A3M071                   /* ... on A3M071 board */
  29
  30 #define CONFIG_SYS_TEXT_BASE    0x01000000      /* boot low for 32 MiB boards */
  31
  32 #define CONFIG_SPL_TARGET       "u-boot-img.bin"
  33
  34 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33MHz */
  35
  36 #define CONFIG_MISC_INIT_R
  37 #define CONFIG_SYS_LOWBOOT              /* Enable lowboot       */
  38
  39 #ifdef CONFIG_A4M2K
  40 #define CONFIG_HOSTNAME         a4m2k
  41 #else
  42 #define CONFIG_HOSTNAME         a3m071
  43 #endif
  44
  45 /*
  46  * Serial console configuration
  47  */
  48 #define CONFIG_PSC_CONSOLE      1           /* console is on PSC1 */
  49 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  50 #define CONFIG_SYS_BAUDRATE_TABLE               \
  51         { 9600, 19200, 38400, 57600, 115200, 230400 }
  52
  53 /*
  54  * Command line configuration.
  55  */
  56 #include <config_cmd_default.h>
  57
  58 #define CONFIG_CMD_BSP
  59 #define CONFIG_CMD_CACHE
  60 #define CONFIG_CMD_MII
  61 #define CONFIG_CMD_REGINFO
  62
  63 /*
  64  * IPB Bus clocking configuration.
  65  */
  66 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
  67 /* define for 66MHz speed - undef for 33MHz PCI clock speed */
  68 #ifdef CONFIG_A4M2K
  69 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
  70 #else
  71 #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
  72 #endif
  73
  74 /* pass open firmware flat tree */
  75 #define CONFIG_OF_LIBFDT
  76 #define CONFIG_OF_BOARD_SETUP
  77
  78 /* maximum size of the flat tree (8K) */
  79 #define OF_FLAT_TREE_MAX_SIZE   8192
  80
  81 #define OF_CPU                  "PowerPC,5200@0"
  82 #define OF_SOC                  "soc5200@f0000000"
  83 #define OF_TBCLK                (bd->bi_busfreq / 4)
  84 #define OF_STDOUT_PATH          "/soc5200@f0000000/serial@2000"
  85
  86 /*
  87  * NOR flash configuration
  88  */
  89 #define CONFIG_SYS_FLASH_BASE           0xfc000000
  90 #define CONFIG_SYS_FLASH_SIZE           0x02000000
  91 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x40000)
  92
  93 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  94 #define CONFIG_SYS_MAX_FLASH_SECT       256
  95 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000
  96 #define CONFIG_SYS_FLASH_WRITE_TOUT     500
  97 #define CONFIG_SYS_FLASH_LOCK_TOUT      5
  98 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    10000
  99 #define CONFIG_SYS_FLASH_PROTECTION
 100 #define CONFIG_FLASH_CFI_DRIVER
 101 #define CONFIG_SYS_FLASH_CFI
 102 #define CONFIG_SYS_FLASH_EMPTY_INFO
 103 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 104 #define CONFIG_FLASH_VERIFY
 105
 106 /*
 107  * Environment settings
 108  */
 109 #define CONFIG_ENV_IS_IN_FLASH
 110 #define CONFIG_ENV_SIZE         0x10000
 111 #define CONFIG_ENV_SECT_SIZE    0x20000
 112 #define CONFIG_ENV_OVERWRITE
 113
 114 /*
 115  * Memory map
 116  */
 117 #define CONFIG_SYS_MBAR                 0xf0000000
 118 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 119 #define CONFIG_SYS_DEFAULT_MBAR         0x80000000
 120
 121 /* Use SRAM until RAM will be available */
 122 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 123 #define CONFIG_SYS_INIT_RAM_END         MPC5XXX_SRAM_SIZE
 124
 125
 126 #define CONFIG_SYS_GBL_DATA_SIZE        128
 127 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - \
 128                                          CONFIG_SYS_GBL_DATA_SIZE)
 129 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 130
 131 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 132
 133 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)
 134 #define CONFIG_SYS_MALLOC_LEN           (1 << 20)
 135 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 136
 137 /*
 138  * Ethernet configuration
 139  */
 140 #define CONFIG_MPC5xxx_FEC
 141 #define CONFIG_MPC5xxx_FEC_MII100
 142 #ifdef CONFIG_A4M2K
 143 #define CONFIG_PHY_ADDR                 0x01
 144 #else
 145 #define CONFIG_PHY_ADDR                 0x00
 146 #endif
 147
 148 /*
 149  * GPIO configuration
 150  */
 151
 152 /*
 153  * GPIO-config depends on failsave-level
 154  * failsave 0 means just MPX-config, no digiboard, no fpga
 155  *          1 means digiboard ok
 156  *          2 means fpga ok
 157  */
 158
 159 #ifdef CONFIG_A4M2K
 160 #define CONFIG_SYS_GPS_PORT_CONFIG      0x0005C805
 161 #else
 162 /* for failsave-level 0 - full failsave */
 163 #define CONFIG_SYS_GPS_PORT_CONFIG      0x1005C005
 164 /* for failsave-level 1 - only digiboard ok */
 165 #define CONFIG_SYS_GPS_PORT_CONFIG_1    0x1005C005
 166 /* for failsave-level 2 - all ok */
 167 #define CONFIG_SYS_GPS_PORT_CONFIG_2    0x1005C005
 168 #endif
 169
 170 #define CONFIG_WDOG_GPIO_PIN            GPIO_WKUP_7
 171 #if defined(CONFIG_A4M2K) && !defined(CONFIG_SPL_BUILD)
 172 #define CONFIG_HW_WATCHDOG              /* Use external HW-Watchdog     */
 173 #endif
 174
 175 /*
 176  * Configuration matrix
 177  *                        MSB                          LSB
 178  * failsave 0  0x1005C005  00010000000001011100000000000101  ( full failsave )
 179  * failsave 1  0x1005C005  00010000000001011100000000000101  ( digib.-ver ok )
 180  * failsave 2  0x1005C005  00010000000001011100000000000101  ( all ok )
 181  *                         || ||| ||  |   ||| |   |   |   |
 182  *                         || ||| ||  |   ||| |   |   |   |  bit rev name
 183  *                         ++-+++-++--+---+++-+---+---+---+-  0   31 CS1
 184  *                          +-+++-++--+---+++-+---+---+---+-  1   30 LPTZ
 185  *                            ||| ||  |   ||| |   |   |   |   2   29 ALTs
 186  *                            +++-++--+---+++-+---+---+---+-  3   28 ALTs
 187  *                             ++-++--+---+++-+---+---+---+-  4   27 CS7
 188  *                              +-++--+---+++-+---+---+---+-  5   26 CS6
 189  *                                ||  |   ||| |   |   |   |   6   25 ATA
 190  *                                ++--+---+++-+---+---+---+-  7   24 ATA
 191  *                                 +--+---+++-+---+---+---+-  8   23 IR_USB_CLK
 192  *                                    |   ||| |   |   |   |   9   22 IRDA
 193  *                                    |   ||| |   |   |   |  10   21 IRDA
 194  *                                    +---+++-+---+---+---+- 11   20 IRDA
 195  *                                        ||| |   |   |   |  12   19 Ether
 196  *                                        ||| |   |   |   |  13   18 Ether
 197  *                                        ||| |   |   |   |  14   17 Ether
 198  *                                        +++-+---+---+---+- 15   16 Ether
 199  *                                         ++-+---+---+---+- 16   15 PCI_DIS
 200  *                                          +-+---+---+---+- 17   14 USB_SE
 201  *                                            |   |   |   |  18   13 USB
 202  *                                            +---+---+---+- 19   12 USB
 203  *                                                |   |   |  20   11 PSC3
 204  *                                                |   |   |  21   10 PSC3
 205  *                                                |   |   |  22    9 PSC3
 206  *                                                +---+---+- 23    8 PSC3
 207  *                                                    |   |  24    7 -
 208  *                                                    |   |  25    6 PSC2
 209  *                                                    |   |  26    5 PSC2
 210  *                                                    +---+- 27    4 PSC2
 211  *                                                        |  28    3 -
 212  *                                                        |  29    2 PSC1
 213  *                                                        |  30    1 PSC1
 214  *                                                        +- 31    0 PSC1
 215  */
 216
 217
 218 /*
 219  * Miscellaneous configurable options
 220  */
 221 #define CONFIG_SYS_LONGHELP
 222 #define CONFIG_SYS_PROMPT               "=> "
 223
 224 #define CONFIG_CMDLINE_EDITING
 225 #define CONFIG_SYS_HUSH_PARSER
 226 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 227
 228 #if defined(CONFIG_CMD_KGDB)
 229 #define CONFIG_SYS_CBSIZE               1024
 230 #else
 231 #define CONFIG_SYS_CBSIZE               256
 232 #endif
 233 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 234 #define CONFIG_SYS_MAXARGS              16
 235 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 236
 237 #define CONFIG_SYS_MEMTEST_START        0x00100000
 238 #define CONFIG_SYS_MEMTEST_END          0x00f00000
 239
 240 #define CONFIG_SYS_LOAD_ADDR            0x00100000
 241
 242 #define CONFIG_SYS_HZ                   1000
 243 #define CONFIG_LOOPW
 244 #define CONFIG_SYS_CONSOLE_INFO_QUIET   /* don't print console @ startup*/
 245
 246 /*
 247  * Various low-level settings
 248  */
 249 #define CONFIG_SYS_HID0_INIT            (HID0_ICE | HID0_ICFI)
 250 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 251
 252 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 253 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 254 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 255 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 256
 257 #ifdef CONFIG_A4M2K
 258 /* external MRAM */
 259 #define CONFIG_SYS_CS1_START            0xf1000000
 260 #define CONFIG_SYS_CS1_SIZE             (512 << 10)     /* 512KiB MRAM */
 261 #endif
 262
 263 #define CONFIG_SYS_CS2_START            0xe0000000
 264 #define CONFIG_SYS_CS2_SIZE             0x00100000
 265
 266 /* FPGA slave io (512kiB / 1MiB) - see ticket #66 */
 267 #define CONFIG_SYS_CS3_START            0xE9000000
 268 #ifdef CONFIG_A4M2K
 269 #define CONFIG_SYS_CS3_SIZE             0x00100000
 270 #else
 271 #define CONFIG_SYS_CS3_SIZE             0x00080000
 272 #endif
 273 /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0032B900 */
 274 #define CONFIG_SYS_CS3_CFG              0x0032B900
 275
 276 #ifndef CONFIG_A4M2K
 277 /* Diagnosis Interface - see ticket #63 */
 278 #define CONFIG_SYS_CS4_START            0xEA000000
 279 #define CONFIG_SYS_CS4_SIZE             0x00000001
 280 /* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0002B900 */
 281 #define CONFIG_SYS_CS4_CFG              0x0002B900
 282 #endif
 283
 284 /* FPGA master io (64kiB / 1MiB) - see ticket #66 */
 285 #define CONFIG_SYS_CS5_START            0xE8000000
 286 #ifdef CONFIG_A4M2K
 287 #define CONFIG_SYS_CS5_SIZE             0x00100000
 288 #else
 289 #define CONFIG_SYS_CS5_SIZE             0x00010000
 290 #endif
 291 /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0  = 0x0032B900 */
 292 #define CONFIG_SYS_CS5_CFG              0x0032B900
 293
 294 #ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2     /* for pci_clk  = 66 MHz */
 295 #define CONFIG_SYS_BOOTCS_CFG           0x0006F900
 296 #define CONFIG_SYS_CS1_CFG              0x0008FD00
 297 #define CONFIG_SYS_CS2_CFG              0x0006F90C
 298 #else   /* for pci_clk = 33 MHz */
 299 #define CONFIG_SYS_BOOTCS_CFG           0x0002F900
 300 #define CONFIG_SYS_CS1_CFG              0x0001FB00
 301 #define CONFIG_SYS_CS2_CFG              0x0002F90C
 302 #endif
 303
 304 #define CONFIG_SYS_CS_BURST             0x00000000
 305 /* set DC for FPGA CS5 and CS3 to 0 - see ticket #66 */
 306 /* R  7  R  6  R  5  R  4  R  3  R  2  R  1  R  0  */
 307 /* 00 11 00 11 00 00 00 11 00 00 00 00 00 00 00 00 */
 308 #define CONFIG_SYS_CS_DEADCYCLE         0x33030000
 309
 310 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 311
 312 /*
 313  * Environment Configuration
 314  */
 315
 316 #define CONFIG_BOOTDELAY        0       /* -1 disables auto-boot */
 317 #undef  CONFIG_BOOTARGS
 318 #define CONFIG_ZERO_BOOTDELAY_CHECK
 319
 320 #define CONFIG_PREBOOT  "echo;" \
 321         "echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \
 322         "echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \
 323         "echo"
 324
 325 #undef  CONFIG_BOOTARGS
 326
 327 #define CONFIG_SYS_OS_BASE      0xfc080000
 328 #define CONFIG_SYS_FDT_BASE     0xfc060000
 329
 330 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 331         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 332         "netdev=eth0\0"                                                 \
 333         "verify=no\0"                                                   \
 334         "loadaddr=200000\0"                                             \
 335         "kernel_addr=" __stringify(CONFIG_SYS_OS_BASE) "\0"             \
 336         "kernel_addr_r=1000000\0"                                       \
 337         "fdt_addr=" __stringify(CONFIG_SYS_FDT_BASE) "\0"               \
 338         "fdt_addr_r=1800000\0"                                          \
 339         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 340         "fdtfile=" __stringify(CONFIG_HOSTNAME) "/"                     \
 341                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
 342         "rootpath=/opt/eldk-5.2.1/powerpc/"                             \
 343                 "core-image-minimal-mtdutils-dropbear-generic\0"        \
 344         "consoledev=ttyPSC0\0"                                          \
 345         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 346                 "nfsroot=${serverip}:${rootpath}\0"                     \
 347         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 348         "mtdargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2\0" \
 349         "addip=setenv bootargs ${bootargs} "                            \
 350                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 351                 ":${hostname}:${netdev}:off panic=1\0"                  \
 352         "addtty=setenv bootargs ${bootargs} "                           \
 353                 "console=${consoledev},${baudrate}\0"                   \
 354         "flash_nfs=run nfsargs addip addtty;"                           \
 355                 "bootm ${kernel_addr} - ${fdtaddr}\0"                   \
 356         "flash_mtd=run mtdargs addip addtty;"                           \
 357                 "bootm ${kernel_addr} - ${fdtaddr}\0"                   \
 358         "flash_self=run ramargs addip addtty;"                          \
 359                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 360         "net_nfs=tftp ${kernel_addr_r} ${bootfile};"                    \
 361                 "tftp ${fdt_addr_r} ${fdtfile};"                        \
 362                 "run nfsargs addip addtty;"                             \
 363                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 364         "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME)           \
 365                 "/u-boot-img.bin\0"                                     \
 366         "update=protect off fc000000 fc03ffff; "                        \
 367                 "era fc000000 fc03ffff; cp.b ${loadaddr} fc000000 40000\0" \
 368         "upd=run load;run update\0"                                     \
 369         "bootdelay=3\0"                                                 \
 370         "bootcmd=run net_nfs\0"                                         \
 371         ""
 372
 373 #define CONFIG_BOOTCOMMAND      "run flash_mtd"
 374
 375 /*
 376  * SPL related defines
 377  */
 378 #define CONFIG_SPL
 379 #define CONFIG_SPL_FRAMEWORK
 380 #define CONFIG_SPL_BOARD_INIT
 381 #define CONFIG_SPL_NOR_SUPPORT
 382 #define CONFIG_SPL_TEXT_BASE    0xfc000000
 383 #define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/mpc5xxx"
 384 #define CONFIG_SPL_LDSCRIPT     "arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds"
 385 #define CONFIG_SPL_LIBCOMMON_SUPPORT    /* image.c */
 386 #define CONFIG_SPL_LIBGENERIC_SUPPORT   /* string.c */
 387 #define CONFIG_SPL_SERIAL_SUPPORT
 388
 389 /* Place BSS for SPL near end of SDRAM */
 390 #define CONFIG_SPL_BSS_START_ADDR       ((128 - 1) << 20)
 391 #define CONFIG_SPL_BSS_MAX_SIZE         (64 << 10)
 392
 393 #define CONFIG_SPL_OS_BOOT
 394 /* Place patched DT blob (fdt) at this address */
 395 #define CONFIG_SYS_SPL_ARGS_ADDR        0x01800000
 396
 397 /* Settings for real U-Boot to be loaded from NOR flash */
 398 #ifndef __ASSEMBLY__
 399 extern char __spl_flash_end[];
 400 #endif
 401 #define CONFIG_SYS_UBOOT_BASE           __spl_flash_end
 402 #define CONFIG_SYS_SPL_MAX_LEN          (32 << 10)
 403 #define CONFIG_SYS_UBOOT_START          0x1000100
 404
 405 #endif /* __CONFIG_H */