include/configs/UCP1020.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2013-2015 Arcturus Networks, Inc.
   4  *           http://www.arcturusnetworks.com/products/ucp1020/
   5  * based on include/configs/p1_p2_rdb_pc.h
   6  * original copyright follows:
   7  * Copyright 2009-2011 Freescale Semiconductor, Inc.
   8  */
   9
  10 /*
  11  * QorIQ uCP1020-xx boards configuration file
  12  */
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #define CONFIG_PCIE1    /* PCIE controller 1 (slot 1) */
  17 #define CONFIG_PCIE2    /* PCIE controller 2 (slot 2) */
  18 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
  19 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  20 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
  21
  22 #if defined(CONFIG_TARTGET_UCP1020T1)
  23
  24 #define CONFIG_UCP1020_REV_1_3
  25
  26 #define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
  27
  28 #define CONFIG_TSEC1
  29 #define CONFIG_TSEC3
  30 #define CONFIG_HAS_ETH0
  31 #define CONFIG_HAS_ETH1
  32 #define CONFIG_ETHADDR          00:19:D3:FF:FF:FF
  33 #define CONFIG_ETH1ADDR         00:19:D3:FF:FF:FE
  34 #define CONFIG_ETH2ADDR         00:19:D3:FF:FF:FD
  35 #define CONFIG_IPADDR           10.80.41.229
  36 #define CONFIG_SERVERIP         10.80.41.227
  37 #define CONFIG_NETMASK          255.255.252.0
  38 #define CONFIG_ETHPRIME         "eTSEC3"
  39
  40 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  41
  42 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  43
  44 #endif
  45
  46 #if defined(CONFIG_TARGET_UCP1020)
  47
  48 #define CONFIG_UCP1020
  49 #define CONFIG_UCP1020_REV_1_3
  50
  51 #define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
  52
  53 #define CONFIG_TSEC1
  54 #define CONFIG_TSEC2
  55 #define CONFIG_TSEC3
  56 #define CONFIG_HAS_ETH0
  57 #define CONFIG_HAS_ETH1
  58 #define CONFIG_HAS_ETH2
  59 #define CONFIG_ETHADDR          00:06:3B:FF:FF:FF
  60 #define CONFIG_ETH1ADDR         00:06:3B:FF:FF:FE
  61 #define CONFIG_ETH2ADDR         00:06:3B:FF:FF:FD
  62 #define CONFIG_IPADDR           192.168.1.81
  63 #define CONFIG_IPADDR1          192.168.1.82
  64 #define CONFIG_IPADDR2          192.168.1.83
  65 #define CONFIG_SERVERIP         192.168.1.80
  66 #define CONFIG_GATEWAYIP        102.168.1.1
  67 #define CONFIG_NETMASK          255.255.255.0
  68 #define CONFIG_ETHPRIME         "eTSEC1"
  69
  70 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  71
  72 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  73
  74 #endif
  75
  76 #ifdef CONFIG_SDCARD
  77 #define CONFIG_RAMBOOT_SDCARD
  78 #define CONFIG_SYS_RAMBOOT
  79 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  80 #endif
  81
  82 #ifdef CONFIG_SPIFLASH
  83 #define CONFIG_RAMBOOT_SPIFLASH
  84 #define CONFIG_SYS_RAMBOOT
  85 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  86 #endif
  87
  88 #define CONFIG_SYS_TEXT_BASE_NOR        0xeff80000
  89
  90 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  91 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  92 #endif
  93
  94 #ifndef CONFIG_SYS_MONITOR_BASE
  95 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  96 #endif
  97
  98 #define CONFIG_ENV_OVERWRITE
  99
 100 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 101 #define CONFIG_LBA48
 102
 103 #define CONFIG_SYS_CLK_FREQ     66666666
 104 #define CONFIG_DDR_CLK_FREQ     66666666
 105
 106 #define CONFIG_HWCONFIG
 107
 108 /*
 109  * These can be toggled for performance analysis, otherwise use default.
 110  */
 111 #define CONFIG_L2_CACHE
 112 #define CONFIG_BTB
 113
 114 #define CONFIG_ENABLE_36BIT_PHYS
 115
 116 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 117 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 118
 119 #define CONFIG_SYS_CCSRBAR              0xffe00000
 120 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 121
 122 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 123        SPL code*/
 124 #ifdef CONFIG_SPL_BUILD
 125 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 126 #endif
 127
 128 /* DDR Setup */
 129 #define CONFIG_DDR_ECC_ENABLE
 130 #ifndef CONFIG_DDR_ECC_ENABLE
 131 #define CONFIG_SYS_DDR_RAW_TIMING
 132 #define CONFIG_DDR_SPD
 133 #endif
 134 #define CONFIG_SYS_SPD_BUS_NUM 1
 135
 136 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_512M
 137 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 138 #define CONFIG_SYS_SDRAM_SIZE           (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
 139 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 140 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 141
 142 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 143
 144 /* Default settings for DDR3 */
 145 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 146 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 147 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 148 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007f
 149 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014302
 150 #define CONFIG_SYS_DDR_CS1_CONFIG_2     0x00000000
 151
 152 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 153 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 154 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 155 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 156
 157 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 158 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8655A608
 159 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 160 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 161 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 162 #ifdef CONFIG_DDR_ECC_ENABLE
 163 #define CONFIG_SYS_DDR_CONTROL          0xE70C0000      /* Type = DDR3 & ECC */
 164 #else
 165 #define CONFIG_SYS_DDR_CONTROL          0xC70C0000      /* Type = DDR3 */
 166 #endif
 167 #define CONFIG_SYS_DDR_CONTROL_2        0x04401050
 168 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 169 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 170
 171 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 172 #define CONFIG_SYS_DDR_TIMING_0         0x00330004
 173 #define CONFIG_SYS_DDR_TIMING_1         0x6f6B4846
 174 #define CONFIG_SYS_DDR_TIMING_2         0x0FA8C8CF
 175 #define CONFIG_SYS_DDR_CLK_CTRL         0x03000000
 176 #define CONFIG_SYS_DDR_MODE_1           0x40461520
 177 #define CONFIG_SYS_DDR_MODE_2           0x8000c000
 178 #define CONFIG_SYS_DDR_INTERVAL         0x0C300000
 179
 180 #undef CONFIG_CLOCKS_IN_MHZ
 181
 182 /*
 183  * Memory map
 184  *
 185  * 0x0000_0000 0x7fff_ffff      DDR             Up to 2GB cacheable
 186  * 0x8000_0000 0xdfff_ffff      PCI Express Mem 1G non-cacheable(PCIe * 2)
 187  * 0xec00_0000 0xefff_ffff      NOR flash       Up to 64M non-cacheable CS0/1
 188  * 0xf8f8_0000 0xf8ff_ffff      L2 SRAM         Up to 256K cacheable
 189  *   (early boot only)
 190  * 0xffc0_0000 0xffc3_ffff      PCI IO range    256k non-cacheable
 191  * 0xffd0_0000 0xffd0_3fff      L1 for stack    16K cacheable
 192  * 0xffe0_0000 0xffef_ffff      CCSR            1M non-cacheable
 193  */
 194
 195 /*
 196  * Local Bus Definitions
 197  */
 198 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 199 #define CONFIG_SYS_FLASH_BASE           0xec000000
 200
 201 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 202
 203 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 204         | BR_PS_16 | BR_V)
 205
 206 #define CONFIG_FLASH_OR_PRELIM          0xfc000ff7
 207
 208 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 209 #define CONFIG_SYS_FLASH_QUIET_TEST
 210 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 211
 212 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 213
 214 #undef CONFIG_SYS_FLASH_CHECKSUM
 215 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 216 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 217
 218 #define CONFIG_SYS_FLASH_EMPTY_INFO
 219
 220 #define CONFIG_SYS_INIT_RAM_LOCK
 221 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 222 /* Initial L1 address */
 223 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 224 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 225 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 226 /* Size of used area in RAM */
 227 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 228
 229 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 230                                         GENERATED_GBL_DATA_SIZE)
 231 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 232
 233 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)/* Reserve 256 kB for Mon */
 234 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)/* Reserved for malloc */
 235
 236 #define CONFIG_SYS_PMC_BASE     0xff980000
 237 #define CONFIG_SYS_PMC_BASE_PHYS        CONFIG_SYS_PMC_BASE
 238 #define CONFIG_PMC_BR_PRELIM    (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
 239                                         BR_PS_8 | BR_V)
 240 #define CONFIG_PMC_OR_PRELIM    (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 241                                  OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 242                                  OR_GPCM_EAD)
 243
 244 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 245 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 246 #ifdef CONFIG_NAND_FSL_ELBC
 247 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 248 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 249 #endif
 250
 251 /* Serial Port - controlled on board with jumper J8
 252  * open - index 2
 253  * shorted - index 1
 254  */
 255 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 256 #define CONFIG_SYS_NS16550_SERIAL
 257 #define CONFIG_SYS_NS16550_REG_SIZE     1
 258 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 259 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 260 #define CONFIG_NS16550_MIN_FUNCTIONS
 261 #endif
 262
 263 #define CONFIG_SYS_BAUDRATE_TABLE       \
 264         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 265
 266 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 267 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 268
 269 /* I2C */
 270 #define CONFIG_SYS_I2C
 271 #define CONFIG_SYS_I2C_FSL
 272 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 273 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 274 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 275 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 276 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 277 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 278 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 279 #define CONFIG_SYS_SPD_BUS_NUM          1 /* For rom_loc and flash bank */
 280
 281 #define CONFIG_RTC_DS1337
 282 #define CONFIG_RTC_DS1337_NOOSC
 283 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 284 #define CONFIG_SYS_I2C_PCA9557_ADDR     0x18
 285 #define CONFIG_SYS_I2C_NCT72_ADDR       0x4C
 286 #define CONFIG_SYS_I2C_IDT6V49205B      0x69
 287
 288 #if defined(CONFIG_PCI)
 289 /*
 290  * General PCI
 291  * Memory space is mapped 1-1, but I/O space must start from 0.
 292  */
 293
 294 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 295 #define CONFIG_SYS_PCIE2_NAME           "PCIe SLOT CON9"
 296 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 297 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 298 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 299 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 300 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 301 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 302 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 303 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 304
 305 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 306 #define CONFIG_SYS_PCIE1_NAME           "PCIe SLOT CON10"
 307 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 308 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 309 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 310 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 311 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 312 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 313 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 314 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 315
 316 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 317 #endif /* CONFIG_PCI */
 318
 319 /*
 320  * Environment
 321  */
 322 #ifdef CONFIG_ENV_FIT_UCBOOT
 323
 324 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + 0x20000)
 325 #define CONFIG_ENV_SIZE         0x20000
 326 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 327
 328 #else
 329
 330
 331 #ifdef CONFIG_RAMBOOT_SPIFLASH
 332
 333 #define CONFIG_ENV_SIZE         0x3000          /* 12KB */
 334 #define CONFIG_ENV_OFFSET       0x2000          /* 8KB */
 335 #define CONFIG_ENV_SECT_SIZE    0x1000
 336
 337 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
 338 /* Address and size of Redundant Environment Sector     */
 339 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 340 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 341 #endif
 342
 343 #elif defined(CONFIG_RAMBOOT_SDCARD)
 344 #define CONFIG_FSL_FIXED_MMC_LOCATION
 345 #define CONFIG_ENV_SIZE         0x2000
 346 #define CONFIG_SYS_MMC_ENV_DEV  0
 347
 348 #elif defined(CONFIG_SYS_RAMBOOT)
 349 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 350 #define CONFIG_ENV_SIZE         0x2000
 351
 352 #else
 353 #define CONFIG_ENV_BASE         (CONFIG_SYS_FLASH_BASE)
 354 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 355 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 356 #define CONFIG_ENV_ADDR         (CONFIG_ENV_BASE + 0xC0000)
 357 #if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
 358 /* Address and size of Redundant Environment Sector     */
 359 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
 360 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 361 #endif
 362
 363 #endif
 364
 365 #endif  /* CONFIG_ENV_FIT_UCBOOT */
 366
 367 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 368 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 369
 370 /*
 371  * USB
 372  */
 373 #define CONFIG_HAS_FSL_DR_USB
 374
 375 #if defined(CONFIG_HAS_FSL_DR_USB)
 376 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 377
 378 #ifdef CONFIG_USB_EHCI_HCD
 379 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 380 #define CONFIG_USB_EHCI_FSL
 381 #endif
 382 #endif
 383
 384 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 385
 386 #ifdef CONFIG_MMC
 387 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 388 #define CONFIG_MMC_SPI
 389 #endif
 390
 391 /* Misc Extra Settings */
 392 #undef CONFIG_WATCHDOG  /* watchdog disabled */
 393
 394 /*
 395  * Miscellaneous configurable options
 396  */
 397 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 398 #define CONFIG_SYS_HZ           1000    /* decrementer freq: 1ms tick */
 399
 400 /*
 401  * For booting Linux, the board info and command line data
 402  * have to be in the first 64 MB of memory, since this is
 403  * the maximum mapped by the Linux kernel during initialization.
 404  */
 405 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux*/
 406 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 407
 408 #if defined(CONFIG_CMD_KGDB)
 409 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 410 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 411 #endif
 412
 413 /*
 414  * Environment Configuration
 415  */
 416
 417 #if defined(CONFIG_TSEC_ENET)
 418
 419 #if defined(CONFIG_UCP1020_REV_1_2) || defined(CONFIG_UCP1020_REV_1_3)
 420 #else
 421 #error "UCP1020 module revision is not defined !!!"
 422 #endif
 423
 424 #define CONFIG_BOOTP_SERVERIP
 425
 426 #define CONFIG_TSEC1_NAME       "eTSEC1"
 427 #define CONFIG_TSEC2_NAME       "eTSEC2"
 428 #define CONFIG_TSEC3_NAME       "eTSEC3"
 429
 430 #define TSEC1_PHY_ADDR  4
 431 #define TSEC2_PHY_ADDR  0
 432 #define TSEC2_PHY_ADDR_SGMII    0x00
 433 #define TSEC3_PHY_ADDR  6
 434
 435 #define TSEC1_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 436 #define TSEC2_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 437 #define TSEC3_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 438
 439 #define TSEC1_PHYIDX    0
 440 #define TSEC2_PHYIDX    0
 441 #define TSEC3_PHYIDX    0
 442
 443 #endif
 444
 445 #define CONFIG_HOSTNAME         "UCP1020"
 446 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 447 #define CONFIG_BOOTFILE         "uImage"
 448 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 449
 450 /* default location for tftp and bootm */
 451 #define CONFIG_LOADADDR         1000000
 452
 453 #if defined(CONFIG_DONGLE)
 454
 455 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 456 "bootcmd=run prog_spi_mbrbootcramfs\0"                                  \
 457 "bootfile=uImage\0"                                                     \
 458 "consoledev=ttyS0\0"                                                    \
 459 "cramfsfile=image.cramfs\0"                                             \
 460 "dtbaddr=0x00c00000\0"                                                  \
 461 "dtbfile=image.dtb\0"                                                   \
 462 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"                             \
 463 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"                           \
 464 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"                           \
 465 "fileaddr=0x01000000\0"                                                 \
 466 "filesize=0x00080000\0"                                                 \
 467 "flashmbr=sf probe 0; "                                                 \
 468         "tftp $loadaddr $mbr; "                                         \
 469         "sf erase $mbr_offset +$filesize; "                             \
 470         "sf write $loadaddr $mbr_offset $filesize\0"                    \
 471 "flashrecovery=tftp $recoveryaddr $cramfsfile; "                        \
 472         "protect off $nor_recoveryaddr +$filesize; "                    \
 473         "erase $nor_recoveryaddr +$filesize; "                          \
 474         "cp.b $recoveryaddr $nor_recoveryaddr $filesize; "              \
 475         "protect on $nor_recoveryaddr +$filesize\0 "                    \
 476 "flashuboot=tftp $ubootaddr $ubootfile; "                               \
 477         "protect off $nor_ubootaddr +$filesize; "                       \
 478         "erase $nor_ubootaddr +$filesize; "                             \
 479         "cp.b $ubootaddr $nor_ubootaddr $filesize; "                    \
 480         "protect on $nor_ubootaddr +$filesize\0 "                       \
 481 "flashworking=tftp $workingaddr $cramfsfile; "                          \
 482         "protect off $nor_workingaddr +$filesize; "                     \
 483         "erase $nor_workingaddr +$filesize; "                           \
 484         "cp.b $workingaddr $nor_workingaddr $filesize; "                \
 485         "protect on $nor_workingaddr +$filesize\0 "                     \
 486 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "                           \
 487 "kerneladdr=0x01100000\0"                                               \
 488 "kernelfile=uImage\0"                                                   \
 489 "loadaddr=0x01000000\0"                                                 \
 490 "mbr=uCP1020d.mbr\0"                                                    \
 491 "mbr_offset=0x00000000\0"                                               \
 492 "mmbr=uCP1020Quiet.mbr\0"                                               \
 493 "mmcpart=0:2\0"                                                         \
 494 "mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "                       \
 495         "mmc erase 1 1; "                                               \
 496         "mmc write $loadaddr 1 1\0"                                     \
 497 "mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; "                \
 498         "mmc erase 0x40 0x400; "                                        \
 499         "mmc write $loadaddr 0x40 0x400\0"                              \
 500 "netdev=eth0\0"                                                         \
 501 "nor_recoveryaddr=0xEC0A0000\0"                                         \
 502 "nor_ubootaddr=0xEFF80000\0"                                            \
 503 "nor_workingaddr=0xECFA0000\0"                                          \
 504 "norbootrecovery=setenv bootargs $recoverybootargs"                     \
 505         " console=$consoledev,$baudrate $othbootargs; "                 \
 506         "run norloadrecovery; "                                         \
 507         "bootm $kerneladdr - $dtbaddr\0"                                \
 508 "norbootworking=setenv bootargs $workingbootargs"                       \
 509         " console=$consoledev,$baudrate $othbootargs; "                 \
 510         "run norloadworking; "                                          \
 511         "bootm $kerneladdr - $dtbaddr\0"                                \
 512 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "                     \
 513         "setenv cramfsaddr $nor_recoveryaddr; "                         \
 514         "cramfsload $dtbaddr $dtbfile; "                                \
 515         "cramfsload $kerneladdr $kernelfile\0"                          \
 516 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "                      \
 517         "setenv cramfsaddr $nor_workingaddr; "                          \
 518         "cramfsload $dtbaddr $dtbfile; "                                \
 519         "cramfsload $kerneladdr $kernelfile\0"                          \
 520 "prog_spi_mbr=run spi__mbr\0"                                           \
 521 "prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0"       \
 522 "prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; " \
 523         "run spi__cramfs\0"                                             \
 524 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"   \
 525         " console=$consoledev,$baudrate $othbootargs; "                 \
 526         "tftp $rootfsaddr $rootfsfile; "                                \
 527         "tftp $loadaddr $kernelfile; "                                  \
 528         "tftp $dtbaddr $dtbfile; "                                      \
 529         "bootm $loadaddr $rootfsaddr $dtbaddr\0"                        \
 530 "ramdisk_size=120000\0"                                                 \
 531 "ramdiskfile=rootfs.ext2.gz.uboot\0"                                    \
 532 "recoveryaddr=0x02F00000\0"                                             \
 533 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"           \
 534 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "  \
 535         "mw.l 0xffe0f008 0x00400000\0"                                  \
 536 "rootfsaddr=0x02F00000\0"                                               \
 537 "rootfsfile=rootfs.ext2.gz.uboot\0"                                     \
 538 "rootpath=/opt/nfsroot\0"                                               \
 539 "spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; "                \
 540         "protect off 0xeC000000 +$filesize; "                           \
 541         "erase 0xEC000000 +$filesize; "                                 \
 542         "cp.b $loadaddr 0xEC000000 $filesize; "                         \
 543         "cmp.b $loadaddr 0xEC000000 $filesize; "                        \
 544         "protect on 0xeC000000 +$filesize\0"                            \
 545 "spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; "                \
 546         "protect off 0xeFF80000 +$filesize; "                           \
 547         "erase 0xEFF80000 +$filesize; "                                 \
 548         "cp.b $loadaddr 0xEFF80000 $filesize; "                         \
 549         "cmp.b $loadaddr 0xEFF80000 $filesize; "                        \
 550         "protect on 0xeFF80000 +$filesize\0"                            \
 551 "spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; "                   \
 552         "sf probe 0; sf erase 0x8000 +$filesize; "                      \
 553         "sf write $loadaddr 0x8000 $filesize\0"                         \
 554 "spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; "             \
 555         "protect off 0xec0a0000 +$filesize; "                           \
 556         "erase 0xeC0A0000 +$filesize; "                                 \
 557         "cp.b $loadaddr 0xeC0A0000 $filesize; "                         \
 558         "protect on 0xec0a0000 +$filesize\0"                            \
 559 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "                       \
 560         "sf probe 1; sf erase 0 +$filesize; "                           \
 561         "sf write $loadaddr 0 $filesize\0"                              \
 562 "spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; "                       \
 563         "sf probe 0; sf erase 0 +$filesize; "                           \
 564         "sf write $loadaddr 0 $filesize\0"                              \
 565 "tftpflash=tftpboot $loadaddr $uboot; "                                 \
 566         "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 567         "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "  \
 568         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
 569         "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 570         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
 571 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0"                            \
 572 "ubootaddr=0x01000000\0"                                                \
 573 "ubootfile=u-boot.bin\0"                                                \
 574 "ubootd=u-boot4dongle.bin\0"                                            \
 575 "upgrade=run flashworking\0"                                            \
 576 "usb_phy_type=ulpi\0 "                                                  \
 577 "workingaddr=0x02F00000\0"                                              \
 578 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
 579
 580 #else
 581
 582 #if defined(CONFIG_UCP1020T1)
 583
 584 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 585 "bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0"  \
 586 "bootfile=uImage\0"                                                     \
 587 "consoledev=ttyS0\0"                                                    \
 588 "cramfsfile=image.cramfs\0"                                             \
 589 "dtbaddr=0x00c00000\0"                                                  \
 590 "dtbfile=image.dtb\0"                                                   \
 591 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"                             \
 592 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"                           \
 593 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"                           \
 594 "fileaddr=0x01000000\0"                                                 \
 595 "filesize=0x00080000\0"                                                 \
 596 "flashmbr=sf probe 0; "                                                 \
 597         "tftp $loadaddr $mbr; "                                         \
 598         "sf erase $mbr_offset +$filesize; "                             \
 599         "sf write $loadaddr $mbr_offset $filesize\0"                    \
 600 "flashrecovery=tftp $recoveryaddr $cramfsfile; "                        \
 601         "protect off $nor_recoveryaddr +$filesize; "                    \
 602         "erase $nor_recoveryaddr +$filesize; "                          \
 603         "cp.b $recoveryaddr $nor_recoveryaddr $filesize; "              \
 604         "protect on $nor_recoveryaddr +$filesize\0 "                    \
 605 "flashuboot=tftp $ubootaddr $ubootfile; "                               \
 606         "protect off $nor_ubootaddr +$filesize; "                       \
 607         "erase $nor_ubootaddr +$filesize; "                             \
 608         "cp.b $ubootaddr $nor_ubootaddr $filesize; "                    \
 609         "protect on $nor_ubootaddr +$filesize\0 "                       \
 610 "flashworking=tftp $workingaddr $cramfsfile; "                          \
 611         "protect off $nor_workingaddr +$filesize; "                     \
 612         "erase $nor_workingaddr +$filesize; "                           \
 613         "cp.b $workingaddr $nor_workingaddr $filesize; "                \
 614         "protect on $nor_workingaddr +$filesize\0 "                     \
 615 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "                           \
 616 "kerneladdr=0x01100000\0"                                               \
 617 "kernelfile=uImage\0"                                                   \
 618 "loadaddr=0x01000000\0"                                                 \
 619 "mbr=uCP1020.mbr\0"                                                     \
 620 "mbr_offset=0x00000000\0"                                               \
 621 "netdev=eth0\0"                                                         \
 622 "nor_recoveryaddr=0xEC0A0000\0"                                         \
 623 "nor_ubootaddr=0xEFF80000\0"                                            \
 624 "nor_workingaddr=0xECFA0000\0"                                          \
 625 "norbootrecovery=setenv bootargs $recoverybootargs"                     \
 626         " console=$consoledev,$baudrate $othbootargs; "                 \
 627         "run norloadrecovery; "                                         \
 628         "bootm $kerneladdr - $dtbaddr\0"                                \
 629 "norbootworking=setenv bootargs $workingbootargs"                       \
 630         " console=$consoledev,$baudrate $othbootargs; "                 \
 631         "run norloadworking; "                                          \
 632         "bootm $kerneladdr - $dtbaddr\0"                                \
 633 "norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; "                     \
 634         "setenv cramfsaddr $nor_recoveryaddr; "                         \
 635         "cramfsload $dtbaddr $dtbfile; "                                \
 636         "cramfsload $kerneladdr $kernelfile\0"                          \
 637 "norloadworking=mw.l $kerneladdr 0x0 0x00a00000; "                      \
 638         "setenv cramfsaddr $nor_workingaddr; "                          \
 639         "cramfsload $dtbaddr $dtbfile; "                                \
 640         "cramfsload $kerneladdr $kernelfile\0"                          \
 641 "othbootargs=quiet\0"                                                   \
 642 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"   \
 643         " console=$consoledev,$baudrate $othbootargs; "                 \
 644         "tftp $rootfsaddr $rootfsfile; "                                \
 645         "tftp $loadaddr $kernelfile; "                                  \
 646         "tftp $dtbaddr $dtbfile; "                                      \
 647         "bootm $loadaddr $rootfsaddr $dtbaddr\0"                        \
 648 "ramdisk_size=120000\0"                                                 \
 649 "ramdiskfile=rootfs.ext2.gz.uboot\0"                                    \
 650 "recoveryaddr=0x02F00000\0"                                             \
 651 "recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0"           \
 652 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "  \
 653         "mw.l 0xffe0f008 0x00400000\0"                                  \
 654 "rootfsaddr=0x02F00000\0"                                               \
 655 "rootfsfile=rootfs.ext2.gz.uboot\0"                                     \
 656 "rootpath=/opt/nfsroot\0"                                               \
 657 "silent=1\0"                                                            \
 658 "tftpflash=tftpboot $loadaddr $uboot; "                                 \
 659         "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 660         "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "  \
 661         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
 662         "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 663         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
 664 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0"                            \
 665 "ubootaddr=0x01000000\0"                                                \
 666 "ubootfile=u-boot.bin\0"                                                \
 667 "upgrade=run flashworking\0"                                            \
 668 "workingaddr=0x02F00000\0"                                              \
 669 "workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
 670
 671 #else /* For Arcturus Modules */
 672
 673 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 674 "bootcmd=run norkernel\0"                                               \
 675 "bootfile=uImage\0"                                                     \
 676 "consoledev=ttyS0\0"                                                    \
 677 "dtbaddr=0x00c00000\0"                                                  \
 678 "dtbfile=image.dtb\0"                                                   \
 679 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0"                             \
 680 "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"                           \
 681 "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"                           \
 682 "fileaddr=0x01000000\0"                                                 \
 683 "filesize=0x00080000\0"                                                 \
 684 "flashmbr=sf probe 0; "                                                 \
 685         "tftp $loadaddr $mbr; "                                         \
 686         "sf erase $mbr_offset +$filesize; "                             \
 687         "sf write $loadaddr $mbr_offset $filesize\0"                    \
 688 "flashuboot=tftp $loadaddr $ubootfile; "                                \
 689         "protect off $nor_ubootaddr0 +$filesize; "                      \
 690         "erase $nor_ubootaddr0 +$filesize; "                            \
 691         "cp.b $loadaddr $nor_ubootaddr0 $filesize; "                    \
 692         "protect on $nor_ubootaddr0 +$filesize; "                       \
 693         "protect off $nor_ubootaddr1 +$filesize; "                      \
 694         "erase $nor_ubootaddr1 +$filesize; "                            \
 695         "cp.b $loadaddr $nor_ubootaddr1 $filesize; "                    \
 696         "protect on $nor_ubootaddr1 +$filesize\0 "                      \
 697 "format0=protect off $part0base +$part0size; "                          \
 698         "erase $part0base +$part0size\0"                                \
 699 "format1=protect off $part1base +$part1size; "                          \
 700         "erase $part1base +$part1size\0"                                \
 701 "format2=protect off $part2base +$part2size; "                          \
 702         "erase $part2base +$part2size\0"                                \
 703 "format3=protect off $part3base +$part3size; "                          \
 704         "erase $part3base +$part3size\0"                                \
 705 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 "                           \
 706 "kerneladdr=0x01100000\0"                                               \
 707 "kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"                 \
 708 "kernelfile=uImage\0"                                                   \
 709 "loadaddr=0x01000000\0"                                                 \
 710 "mbr=uCP1020.mbr\0"                                                     \
 711 "mbr_offset=0x00000000\0"                                               \
 712 "netdev=eth0\0"                                                         \
 713 "nor_ubootaddr0=0xEC000000\0"                                           \
 714 "nor_ubootaddr1=0xEFF80000\0"                                           \
 715 "norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; " \
 716         "run norkernelload; "                                           \
 717         "bootm $kerneladdr - $dtbaddr\0"                                \
 718 "norkernelload=mw.l $kerneladdr 0x0 0x00a00000; "                       \
 719         "setenv cramfsaddr $part0base; "                                \
 720         "cramfsload $dtbaddr $dtbfile; "                                \
 721         "cramfsload $kerneladdr $kernelfile\0"                          \
 722 "part0base=0xEC100000\0"                                                \
 723 "part0size=0x00700000\0"                                                \
 724 "part1base=0xEC800000\0"                                                \
 725 "part1size=0x02000000\0"                                                \
 726 "part2base=0xEE800000\0"                                                \
 727 "part2size=0x00800000\0"                                                \
 728 "part3base=0xEF000000\0"                                                \
 729 "part3size=0x00F80000\0"                                                \
 730 "partENVbase=0xEC080000\0"                                              \
 731 "partENVsize=0x00080000\0"                                              \
 732 "program0=tftp part0-000000.bin; "                                      \
 733         "protect off $part0base +$filesize; "                           \
 734         "erase $part0base +$filesize; "                                 \
 735         "cp.b $loadaddr $part0base $filesize; "                         \
 736         "echo Verifying...; "                                           \
 737         "cmp.b $loadaddr $part0base $filesize\0"                        \
 738 "program1=tftp part1-000000.bin; "                                      \
 739         "protect off $part1base +$filesize; "                           \
 740         "erase $part1base +$filesize; "                                 \
 741         "cp.b $loadaddr $part1base $filesize; "                         \
 742         "echo Verifying...; "                                           \
 743         "cmp.b $loadaddr $part1base $filesize\0"                        \
 744 "program2=tftp part2-000000.bin; "                                      \
 745         "protect off $part2base +$filesize; "                           \
 746         "erase $part2base +$filesize; "                                 \
 747         "cp.b $loadaddr $part2base $filesize; "                         \
 748         "echo Verifying...; "                                           \
 749         "cmp.b $loadaddr $part2base $filesize\0"                        \
 750 "ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro"   \
 751         "  console=$consoledev,$baudrate $othbootargs; "                \
 752         "tftp $rootfsaddr $rootfsfile; "                                \
 753         "tftp $loadaddr $kernelfile; "                                  \
 754         "tftp $dtbaddr $dtbfile; "                                      \
 755         "bootm $loadaddr $rootfsaddr $dtbaddr\0"                        \
 756 "ramdisk_size=120000\0"                                                 \
 757 "ramdiskfile=rootfs.ext2.gz.uboot\0"                                    \
 758 "releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; "  \
 759         "mw.l 0xffe0f008 0x00400000\0"                                  \
 760 "rootfsaddr=0x02F00000\0"                                               \
 761 "rootfsfile=rootfs.ext2.gz.uboot\0"                                     \
 762 "rootpath=/opt/nfsroot\0"                                               \
 763 "spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; "                       \
 764         "sf probe 0; sf erase 0 +$filesize; "                           \
 765         "sf write $loadaddr 0 $filesize\0"                              \
 766 "spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; "                 \
 767         "protect off 0xeC000000 +$filesize; "                           \
 768         "erase 0xEC000000 +$filesize; "                                 \
 769         "cp.b $loadaddr 0xEC000000 $filesize; "                         \
 770         "cmp.b $loadaddr 0xEC000000 $filesize; "                        \
 771         "protect on 0xeC000000 +$filesize\0"                            \
 772 "tftpflash=tftpboot $loadaddr $uboot; "                                 \
 773         "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 774         "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; "  \
 775         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
 776         "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
 777         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
 778 "uboot= " __stringify(CONFIG_UBOOTPATH) "\0"                            \
 779 "ubootfile=u-boot.bin\0"                                                \
 780 "upgrade=run flashuboot\0"                                              \
 781 "usb_phy_type=ulpi\0 "                                                  \
 782 "boot_nfs= "                                                            \
 783         "setenv bootargs root=/dev/nfs rw "                             \
 784         "nfsroot=$serverip:$rootpath "                                  \
 785         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 786         "console=$consoledev,$baudrate $othbootargs;"                   \
 787         "tftp $loadaddr $bootfile;"                                     \
 788         "tftp $fdtaddr $fdtfile;"                                       \
 789         "bootm $loadaddr - $fdtaddr\0"                                  \
 790 "boot_hd = "                                                            \
 791         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "              \
 792         "console=$consoledev,$baudrate $othbootargs;"                   \
 793         "usb start;"                                                    \
 794         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"                   \
 795         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"                     \
 796         "bootm $loadaddr - $fdtaddr\0"                                  \
 797 "boot_usb_fat = "                                                       \
 798         "setenv bootargs root=/dev/ram rw "                             \
 799         "console=$consoledev,$baudrate $othbootargs "                   \
 800         "ramdisk_size=$ramdisk_size;"                                   \
 801         "usb start;"                                                    \
 802         "fatload usb 0:2 $loadaddr $bootfile;"                          \
 803         "fatload usb 0:2 $fdtaddr $fdtfile;"                            \
 804         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"                    \
 805         "bootm $loadaddr $ramdiskaddr $fdtaddr\0 "                      \
 806 "boot_usb_ext2 = "                                                      \
 807         "setenv bootargs root=/dev/ram rw "                             \
 808         "console=$consoledev,$baudrate $othbootargs "                   \
 809         "ramdisk_size=$ramdisk_size;"                                   \
 810         "usb start;"                                                    \
 811         "ext2load usb 0:4 $loadaddr $bootfile;"                         \
 812         "ext2load usb 0:4 $fdtaddr $fdtfile;"                           \
 813         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"                   \
 814         "bootm $loadaddr $ramdiskaddr $fdtaddr\0 "                      \
 815 "boot_nor = "                                                           \
 816         "setenv bootargs root=/dev/$jffs2nor rw "                       \
 817         "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"  \
 818         "bootm $norbootaddr - $norfdtaddr\0 "                           \
 819 "boot_ram = "                                                           \
 820         "setenv bootargs root=/dev/ram rw "                             \
 821         "console=$consoledev,$baudrate $othbootargs "                   \
 822         "ramdisk_size=$ramdisk_size;"                                   \
 823         "tftp $ramdiskaddr $ramdiskfile;"                               \
 824         "tftp $loadaddr $bootfile;"                                     \
 825         "tftp $fdtaddr $fdtfile;"                                       \
 826         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"
 827
 828 #endif
 829 #endif
 830
 831 #endif /* __CONFIG_H */