include/configs/TQM5200.h

   1 /*
   2  * (C) Copyright 2003-2014
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2004-2006
   6  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  * (easy to change)
  17  */
  18
  19 #define CONFIG_MPC5200          1       /* This is an MPC5200 CPU               */
  20 #define CONFIG_TQM5200          1       /* ... on TQM5200 module                */
  21 #undef CONFIG_TQM5200_REV100            /*  define for revision 100 modules     */
  22
  23 /*
  24  * Valid values for CONFIG_SYS_TEXT_BASE are:
  25  * 0xFC000000   boot low (standard configuration with room for
  26  *              max 64 MByte Flash ROM)
  27  * 0xFFF00000   boot high (for a backup copy of U-Boot)
  28  * 0x00100000   boot from RAM (for testing only)
  29  */
  30 #ifndef CONFIG_SYS_TEXT_BASE
  31 #define CONFIG_SYS_TEXT_BASE    0xFC000000
  32 #endif
  33
  34 /* On a Cameron or on a FO300 board or ...                              */
  35 #if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \
  36         && !defined(CONFIG_FO300)
  37 #define CONFIG_STK52XX          1       /* ... on a STK52XX board               */
  38 #endif
  39
  40 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33.000000MHz         */
  41
  42 #define CONFIG_HIGH_BATS        1       /* High BATs supported                  */
  43
  44 /*
  45  * Serial console configuration
  46  */
  47 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1                   */
  48 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
  49 #define CONFIG_BOOTCOUNT_LIMIT  1
  50
  51 #ifdef CONFIG_FO300
  52 #define CONFIG_SYS_DEVICE_NULLDEV               1       /* enable null device */
  53 #define CONFIG_USB_BIN_FIXUP            1       /* for a buggy USB device */
  54 #if 0
  55 #define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED     1       /* silent console on PSC1 when S1 */
  56                                                         /* switch is closed */
  57 #endif
  58
  59 #undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED              /* silent console on PSC1 when S1 */
  60                                                         /* switch is open */
  61 #endif  /* CONFIG_FO300 */
  62
  63 #if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
  64 #define CONFIG_PS2KBD                   /* AT-PS/2 Keyboard             */
  65 #define CONFIG_PS2MULT                  /* .. on PS/2 Multiplexer       */
  66 #define CONFIG_PS2SERIAL        6       /* .. on PSC6                   */
  67 #define CONFIG_PS2MULT_DELAY    (CONFIG_SYS_HZ/2)       /* Initial delay        */
  68 #define CONFIG_BOARD_EARLY_INIT_R
  69 #endif /* CONFIG_STK52XX */
  70
  71 /*
  72  * PCI Mapping:
  73  * 0x40000000 - 0x4fffffff - PCI Memory
  74  * 0x50000000 - 0x50ffffff - PCI IO Space
  75  */
  76 #if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
  77 /* #define CONFIG_PCI_SCAN_SHOW 1 */
  78
  79 #define CONFIG_PCI_MEM_BUS      0x40000000
  80 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  81 #define CONFIG_PCI_MEM_SIZE     0x10000000
  82
  83 #define CONFIG_PCI_IO_BUS       0x50000000
  84 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  85 #define CONFIG_PCI_IO_SIZE      0x01000000
  86
  87 #define CONFIG_EEPRO100         1
  88 #define CONFIG_SYS_RX_ETH_BUFFER        8  /* use 8 rx buffer on eepro100  */
  89 #define CONFIG_NS8382X          1
  90 #endif  /* CONFIG_STK52XX */
  91
  92 /*
  93  * Video console
  94  */
  95 #ifndef CONFIG_TQM5200S         /* No graphics controller on TQM5200S */
  96 #define CONFIG_VIDEO_SM501
  97 #define CONFIG_VIDEO_SM501_32BPP
  98 #define CONFIG_VIDEO_LOGO
  99
 100 #ifndef CONFIG_FO300
 101 #else
 102 #define CONFIG_VIDEO_BMP_LOGO
 103 #endif
 104
 105 #define CONFIG_SPLASH_SCREEN
 106 #endif /* #ifndef CONFIG_TQM5200S */
 107
 108 /* Partitions */
 109
 110 /* USB */
 111 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
 112     defined(CONFIG_STK52XX)
 113 #define CONFIG_USB_OHCI_NEW
 114 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 115
 116 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
 117 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 118 #define CONFIG_SYS_USB_OHCI_REGS_BASE   MPC5XXX_USB
 119 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "mpc5200"
 120 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
 121
 122 #endif
 123
 124 #ifndef CONFIG_CAM5200
 125 /* POST support */
 126 #define CONFIG_POST             (CONFIG_SYS_POST_MEMORY   | \
 127                                  CONFIG_SYS_POST_CPU)
 128 #endif
 129
 130 #ifdef CONFIG_POST
 131 /* preserve space for the post_word at end of on-chip SRAM */
 132 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
 133 #endif
 134
 135 /*
 136  * BOOTP options
 137  */
 138 #define CONFIG_BOOTP_BOOTFILESIZE
 139 #define CONFIG_BOOTP_BOOTPATH
 140 #define CONFIG_BOOTP_GATEWAY
 141 #define CONFIG_BOOTP_HOSTNAME
 142
 143 /*
 144  * Command line configuration.
 145  */
 146 #define CONFIG_CMD_JFFS2
 147 #define CONFIG_CMD_REGINFO
 148
 149 #ifdef CONFIG_PCI
 150 #define CONFIG_CMD_PCI
 151 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
 152 #endif
 153
 154 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
 155         defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
 156 #endif
 157
 158 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
 159         defined(CONFIG_STK52XX)
 160     #define CONFIG_CFG_USB
 161     #define CONFIG_CFG_FAT
 162 #endif
 163
 164 #define CONFIG_TIMESTAMP                /* display image timestamps */
 165
 166 #if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)
 167 #   define CONFIG_SYS_LOWBOOT           1       /* Boot low */
 168 #endif
 169
 170 /*
 171  * Autobooting
 172  */
 173
 174 #define CONFIG_PREBOOT  "echo;" \
 175         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 176         "echo"
 177
 178 #undef  CONFIG_BOOTARGS
 179
 180 #if defined(CONFIG_TQM5200_B) && !defined(CONFIG_SYS_LOWBOOT)
 181 # define ENV_UPDT                                                       \
 182         "update=protect off FFF00000 +${filesize};"                     \
 183                 "erase FFF00000 +${filesize};"                          \
 184                 "cp.b 200000 FFF00000 ${filesize};"                     \
 185                 "protect on FFF00000 +${filesize}\0"
 186 #else   /* default lowboot configuration */
 187 #   define ENV_UPDT                                                     \
 188         "update=protect off FC000000 +${filesize};"                     \
 189                 "erase FC000000 +${filesize};"                          \
 190                 "cp.b 200000 FC000000 ${filesize};"                     \
 191                 "protect on FC000000 +${filesize}\0"
 192 #endif
 193
 194 #if defined(CONFIG_TQM5200)
 195 #define CUSTOM_ENV_SETTINGS                                             \
 196         "hostname=tqm5200\0"                                            \
 197         "bootfile=/tftpboot/tqm5200/uImage\0"                           \
 198         "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0"                      \
 199         "u-boot=/tftpboot/tqm5200/u-boot.bin\0"
 200 #elif defined(CONFIG_CAM5200)
 201 #define CUSTOM_ENV_SETTINGS                                             \
 202         "bootfile=cam5200/uImage\0"                                     \
 203         "u-boot=cam5200/u-boot.bin\0"                                   \
 204         "setup=tftp 200000 cam5200/setup.img; source 200000\0"
 205 #endif
 206
 207 #if defined(CONFIG_TQM5200_B)
 208 #define ENV_FLASH_LAYOUT                                                \
 209         "fdt_addr=FC100000\0"                                           \
 210         "kernel_addr=FC140000\0"                                        \
 211         "ramdisk_addr=FC600000\0"
 212 #elif defined(CONFIG_CHARON)
 213 #define ENV_FLASH_LAYOUT                                                \
 214         "fdt_addr=FDFC0000\0"                                           \
 215         "kernel_addr=FC0A0000\0"                                        \
 216         "ramdisk_addr=FC200000\0"
 217 #else   /* !CONFIG_TQM5200_B */
 218 #define ENV_FLASH_LAYOUT                                                \
 219         "fdt_addr=FC0A0000\0"                                           \
 220         "kernel_addr=FC0C0000\0"                                        \
 221         "ramdisk_addr=FC300000\0"
 222 #endif
 223
 224 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 225         "netdev=eth0\0"                                                 \
 226         "console=ttyPSC0\0"                                             \
 227         ENV_FLASH_LAYOUT                                                \
 228         "kernel_addr_r=400000\0"                                        \
 229         "fdt_addr_r=600000\0"                                           \
 230         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 231         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 232         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 233                 "nfsroot=${serverip}:${rootpath}\0"                     \
 234         "addip=setenv bootargs ${bootargs} "                            \
 235                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 236                 ":${hostname}:${netdev}:off panic=1\0"                  \
 237         "addcons=setenv bootargs ${bootargs} "                          \
 238                 "console=${console},${baudrate}\0"                      \
 239         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 240         "flash_self_old=sete console ttyS0; "                           \
 241                 "run ramargs addip addcons addmtd; "                    \
 242                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 243         "flash_self=run ramargs addip addcons;"                         \
 244                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 245         "flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;"  \
 246                 "bootm ${kernel_addr}\0"                                \
 247         "flash_nfs=run nfsargs addip addcons;"                          \
 248                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 249         "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"                \
 250                 "sete console ttyS0; run nfsargs addip addcons;bootm\0" \
 251         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 252                 "tftp ${fdt_addr_r} ${fdt_file}; "                      \
 253                 "run nfsargs addip addcons addmtd; "                    \
 254                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 255         CUSTOM_ENV_SETTINGS                                             \
 256         "load=tftp 200000 ${u-boot}\0"                                  \
 257         ENV_UPDT                                                        \
 258         ""
 259
 260 #define CONFIG_BOOTCOMMAND      "run net_nfs"
 261
 262 /*
 263  * IPB Bus clocking configuration.
 264  */
 265 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
 266
 267 #if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
 268 /*
 269  * PCI Bus clocking configuration
 270  *
 271  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
 272  * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
 273  * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
 274  */
 275 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2    /* define for 66MHz speed */
 276 #endif
 277
 278 /*
 279  * Flash configuration
 280  */
 281 #define CONFIG_SYS_FLASH_BASE           0xFC000000
 282
 283 #if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
 284 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max num of flash banks
 285                                            (= chip selects) */
 286 #define CONFIG_SYS_FLASH_WORD_SIZE      unsigned int /* main flash device with */
 287 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms) */
 288 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms) */
 289
 290 #define CONFIG_SYS_FLASH_ADDR0          0x555
 291 #define CONFIG_SYS_FLASH_ADDR1          0x2AA
 292 #define CONFIG_SYS_FLASH_2ND_16BIT_DEV  1       /* NIOS flash is a 16bit device */
 293 #define CONFIG_SYS_MAX_FLASH_SECT       128
 294 #else
 295 /* use CFI flash driver */
 296 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 297 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 298 #define CONFIG_FLASH_CFI_MTD            /* with MTD support */
 299 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_BOOTCS_START }
 300 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of flash banks
 301                                            (= chip selects) */
 302 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max num of sects on one chip */
 303 #endif
 304
 305 #define CONFIG_SYS_FLASH_EMPTY_INFO
 306 #define CONFIG_SYS_FLASH_SIZE           0x04000000 /* 64 MByte */
 307 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 308
 309 #if defined (CONFIG_CAM5200)
 310 # define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + 0x00040000)
 311 #elif defined(CONFIG_TQM5200_B)
 312 # define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + 0x00080000)
 313 #else
 314 # define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + 0x00060000)
 315 #endif
 316
 317 /* Dynamic MTD partition support */
 318 #define CONFIG_CMD_MTDPARTS
 319 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 320 #define MTDIDS_DEFAULT          "nor0=fc000000.flash"
 321
 322 #if defined(CONFIG_STK52XX)
 323 # if defined(CONFIG_TQM5200_B)
 324 #  if defined(CONFIG_SYS_LOWBOOT)
 325 #   define MTDPARTS_DEFAULT     "mtdparts=fc000000.flash:1m(firmware)," \
 326                                                 "256k(dtb),"            \
 327                                                 "2304k(kernel),"        \
 328                                                 "2560k(small-fs),"      \
 329                                                 "2m(initrd),"           \
 330                                                 "8m(misc),"             \
 331                                                 "16m(big-fs)"
 332 #  else /* highboot */
 333 #   define MTDPARTS_DEFAULT     "mtdparts=fc000000.flash:2560k(kernel),"\
 334                                                 "3584k(small-fs),"      \
 335                                                 "2m(initrd),"           \
 336                                                 "8m(misc),"             \
 337                                                 "15m(big-fs),"          \
 338                                                 "1m(firmware)"
 339 #  endif /* CONFIG_SYS_LOWBOOT */
 340 # else  /* !CONFIG_TQM5200_B */
 341 #   define MTDPARTS_DEFAULT     "mtdparts=fc000000.flash:640k(firmware),"\
 342                                                 "128k(dtb),"            \
 343                                                 "2304k(kernel),"        \
 344                                                 "2m(initrd),"           \
 345                                                 "4m(small-fs),"         \
 346                                                 "8m(misc),"             \
 347                                                 "15m(big-fs)"
 348 # endif /* CONFIG_TQM5200_B */
 349 #elif defined (CONFIG_CAM5200)
 350 #   define MTDPARTS_DEFAULT     "mtdparts=fc000000.flash:768k(firmware),"\
 351                                                 "1792k(kernel),"        \
 352                                                 "5632k(rootfs),"        \
 353                                                 "24m(home)"
 354 #elif defined (CONFIG_CHARON)
 355 #   define MTDPARTS_DEFAULT     "mtdparts=fc000000.flash:640k(firmware),"\
 356                                                 "1408k(kernel),"        \
 357                                                 "2m(initrd),"           \
 358                                                 "4m(small-fs),"         \
 359                                                 "24320k(big-fs),"       \
 360                                                 "256k(dts)"
 361 #elif defined (CONFIG_FO300)
 362 #   define MTDPARTS_DEFAULT     "mtdparts=fc000000.flash:640k(firmware),"\
 363                                                 "1408k(kernel),"        \
 364                                                 "2m(initrd),"           \
 365                                                 "4m(small-fs),"         \
 366                                                 "8m(misc),"             \
 367                                                 "16m(big-fs)"
 368 #else
 369 # error "Unknown Carrier Board"
 370 #endif  /* CONFIG_STK52XX */
 371
 372 /*
 373  * Environment settings
 374  */
 375 #define CONFIG_ENV_IS_IN_FLASH  1
 376 #define CONFIG_ENV_SIZE         0x4000  /* 16 k - keep small for fast booting */
 377 #if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200)
 378 #define CONFIG_ENV_SECT_SIZE    0x40000
 379 #else
 380 #define CONFIG_ENV_SECT_SIZE    0x20000
 381 #endif /* CONFIG_TQM5200_B */
 382 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 383 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 384
 385 /*
 386  * Memory map
 387  */
 388 #define CONFIG_SYS_MBAR         0xF0000000
 389 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 390 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 391
 392 /* Use ON-Chip SRAM until RAM will be available */
 393 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 394 #ifdef CONFIG_POST
 395 /* preserve space for the post_word at end of on-chip SRAM */
 396 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_POST_SIZE
 397 #else
 398 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_SIZE
 399 #endif
 400
 401 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 402 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 403
 404 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 405 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 406 #   define CONFIG_SYS_RAMBOOT           1
 407 #endif
 408
 409 #if defined (CONFIG_CAM5200)
 410 # define CONFIG_SYS_MONITOR_LEN (256 << 10)     /* Reserve 256 kB for Monitor   */
 411 #elif defined(CONFIG_TQM5200_B)
 412 # define CONFIG_SYS_MONITOR_LEN (512 << 10)     /* Reserve 512 kB for Monitor   */
 413 #else
 414 # define CONFIG_SYS_MONITOR_LEN (384 << 10)     /* Reserve 384 kB for Monitor   */
 415 #endif
 416
 417 #define CONFIG_SYS_MALLOC_LEN           (1024 << 10)    /* Reserve 1024 kB for malloc() */
 418 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 419
 420 /*
 421  * Ethernet configuration
 422  */
 423 #define CONFIG_MPC5xxx_FEC      1
 424 #define CONFIG_MPC5xxx_FEC_MII100
 425 /*
 426  * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
 427  */
 428 /* #define CONFIG_MPC5xxx_FEC_MII10 */
 429 #define CONFIG_PHY_ADDR         0x00
 430
 431 /*
 432  * GPIO configuration
 433  *
 434  * use CS1: Bit 0 (mask: 0x80000000):
 435  *         1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1).
 436  * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
 437  *        00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
 438  *              SPI on PSC3 according to PSC3 setting. Use for CAM5200.
 439  *        01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
 440  *              Use for REV200 STK52XX boards and FO300 boards. Do not use
 441  *              with REV100 modules (because, there I2C1 is used as I2C bus).
 442  * use ATA: Bits 6-7 (mask 0x03000000):
 443  *        00 -> No ATA chip selects, csb_4/5 used as normal chip selects.
 444  *              Use for CAM5200 board.
 445  *        01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards.
 446  * use PSC6: Bits 9-11 (mask 0x00700000):
 447  *       000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as
 448  *              UART, CODEC or IrDA.
 449  *              GPIO on PSC6_3 is used in post_hotkeys_pressed() to
 450  *              enable extended POST tests.
 451  *              Use for MINI-FAP and TQM5200_IB boards.
 452  *       101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used.
 453  *              Extended POST test is not available.
 454  *              Use for STK52xx, FO300 and CAM5200 boards.
 455  *              WARNING: When the extended POST is enabled, these bits will
 456  *                       be overridden by this code as GPIOs!
 457  * use PCI_DIS: Bit 16 (mask 0x00008000):
 458  *         1 -> disable PCI controller (on CAM5200 board).
 459  * use USB: Bits 18-19 (mask 0x00003000):
 460  *        10 -> two UARTs (on FO300 and CAM5200).
 461  * use PSC3: Bits 20-23 (mask: 0x00000f00):
 462  *      0000 -> All PSC3 pins are GPIOs.
 463  *      1100 -> UART/SPI (on FO300 board).
 464  *      0100 -> UART (on CAM5200 board).
 465  * use PSC2: Bits 25:27 (mask: 0x00000030):
 466  *       000 -> All PSC2 pins are GPIOs.
 467  *       100 -> UART (on CAM5200 board).
 468  *       001 -> CAN1/2 on PSC2 pins.
 469  *              Use for REV100 STK52xx boards
 470  *       01x -> Use AC97 (on FO300 board).
 471  * use PSC1: Bits 29-31 (mask: 0x00000007):
 472  *       100 -> UART (on all boards).
 473  */
 474 #if !defined(CONFIG_SYS_GPS_PORT_CONFIG)
 475 #if defined (CONFIG_MINIFAP)
 476 # define CONFIG_SYS_GPS_PORT_CONFIG     0x91000004
 477 #elif defined (CONFIG_STK52XX)
 478 # if defined (CONFIG_STK52XX_REV100)
 479 #  define CONFIG_SYS_GPS_PORT_CONFIG    0x81500014
 480 # else /* STK52xx REV200 and above */
 481 #  if defined (CONFIG_TQM5200_REV100)
 482 #   error TQM5200 REV100 not supported on STK52XX REV200 or above
 483 #  else/* TQM5200 REV200 and above */
 484 #   define CONFIG_SYS_GPS_PORT_CONFIG   0x91500404
 485 #  endif
 486 # endif
 487 #elif defined (CONFIG_FO300)
 488 # define CONFIG_SYS_GPS_PORT_CONFIG     0x91502c24
 489 #elif defined (CONFIG_CAM5200)
 490 # define CONFIG_SYS_GPS_PORT_CONFIG     0x8050A444
 491 #else  /* TMQ5200 Inbetriebnahme-Board */
 492 # define CONFIG_SYS_GPS_PORT_CONFIG     0x81000004
 493 #endif
 494 #endif
 495
 496 /*
 497  * Miscellaneous configurable options
 498  */
 499 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 500
 501 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 502
 503 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
 504 #if defined(CONFIG_CMD_KGDB)
 505 #define CONFIG_SYS_CACHELINE_SHIFT      5       /* log base 2 of the above value */
 506 #endif
 507
 508 #if defined(CONFIG_CMD_KGDB)
 509 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
 510 #else
 511 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
 512 #endif
 513 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 514 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 515 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 516
 517 /* Enable an alternate, more extensive memory test */
 518 #define CONFIG_SYS_ALT_MEMTEST
 519
 520 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 521 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1 ... 15 MB in DRAM  */
 522
 523 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 524
 525 /*
 526  * Various low-level settings
 527  */
 528 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 529 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 530
 531 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
 532 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 533 #ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
 534 #define CONFIG_SYS_BOOTCS_CFG           0x0008DF30 /* for pci_clk  = 66 MHz */
 535 #else
 536 #define CONFIG_SYS_BOOTCS_CFG           0x0004DF30 /* for pci_clk = 33 MHz */
 537 #endif
 538 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 539 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 540
 541 #define CONFIG_LAST_STAGE_INIT
 542
 543 /*
 544  * SRAM - Do not map below 2 GB in address space, because this area is used
 545  * for SDRAM autosizing.
 546  */
 547 #define CONFIG_SYS_CS2_START            0xE5000000
 548 #define CONFIG_SYS_CS2_SIZE             0x100000        /* 1 MByte */
 549 #define CONFIG_SYS_CS2_CFG              0x0004D930
 550
 551 /*
 552  * Grafic controller - Do not map below 2 GB in address space, because this
 553  * area is used for SDRAM autosizing.
 554  */
 555 #define SM501_FB_BASE           0xE0000000
 556 #define CONFIG_SYS_CS1_START            (SM501_FB_BASE)
 557 #define CONFIG_SYS_CS1_SIZE             0x4000000       /* 64 MByte */
 558 #define CONFIG_SYS_CS1_CFG              0x8F48FF70
 559 #define SM501_MMIO_BASE         CONFIG_SYS_CS1_START + 0x03E00000
 560
 561 #define CONFIG_SYS_CS_BURST             0x00000000
 562 #define CONFIG_SYS_CS_DEADCYCLE 0x33333311      /* 1 dead cycle for flash and SM501 */
 563
 564 #if defined(CONFIG_CAM5200)
 565 #define CONFIG_SYS_CS4_START            0xB0000000
 566 #define CONFIG_SYS_CS4_SIZE             0x00010000
 567 #define CONFIG_SYS_CS4_CFG              0x01019C10
 568
 569 #define CONFIG_SYS_CS5_START            0xD0000000
 570 #define CONFIG_SYS_CS5_SIZE             0x01208000
 571 #define CONFIG_SYS_CS5_CFG              0x1414BF10
 572 #endif
 573
 574 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 575
 576 /*-----------------------------------------------------------------------
 577  * USB stuff
 578  *-----------------------------------------------------------------------
 579  */
 580 #define CONFIG_USB_CLOCK        0x0001BBBB
 581 #define CONFIG_USB_CONFIG       0x00001000
 582
 583 /*-----------------------------------------------------------------------
 584  * IDE/ATA stuff Supports IDE harddisk
 585  *-----------------------------------------------------------------------
 586  */
 587
 588 #undef  CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 589
 590 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 591 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 592
 593 #define CONFIG_IDE_RESET                /* reset for ide supported      */
 594 #define CONFIG_IDE_PREINIT
 595
 596 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 597 #define CONFIG_SYS_IDE_MAXDEVICE        2       /* max. 2 drives per IDE bus    */
 598
 599 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 600
 601 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 602
 603 /* Offset for data I/O */
 604 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 605
 606 /* Offset for normal register accesses */
 607 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 608
 609 /* Offset for alternate registers */
 610 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 611
 612 /* Interval between registers */
 613 #define CONFIG_SYS_ATA_STRIDE           4
 614
 615 /* Support ATAPI devices */
 616 #define CONFIG_ATAPI                    1
 617
 618 /*-----------------------------------------------------------------------
 619  * Open firmware flat tree support
 620  *-----------------------------------------------------------------------
 621  */
 622 #define OF_CPU                  "PowerPC,5200@0"
 623 #define OF_SOC                  "soc5200@f0000000"
 624 #define OF_TBCLK                (bd->bi_busfreq / 4)
 625 #define OF_STDOUT_PATH          "/soc5200@f0000000/serial@2000"
 626
 627 #endif /* __CONFIG_H */