include/configs/T4240RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #define CONFIG_PCIE4
  16
  17 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  18
  19 #ifdef CONFIG_RAMBOOT_PBL
  20 #ifndef CONFIG_SDCARD
  21 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  22 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  23 #else
  24 #define RESET_VECTOR_OFFSET             0x27FFC
  25 #define BOOT_PAGE_OFFSET                0x27000
  26
  27 #ifdef  CONFIG_SDCARD
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  29 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  30 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  31 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  32 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  33 #endif
  34
  35 #endif
  36 #endif /* CONFIG_RAMBOOT_PBL */
  37
  38 /* High Level Configuration Options */
  39 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  40
  41 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  42 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  43 #endif
  44
  45 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  46 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  47 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  48 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  49 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  50
  51 /*
  52  * These can be toggled for performance analysis, otherwise use default.
  53  */
  54 #define CONFIG_SYS_CACHE_STASHING
  55 #ifdef CONFIG_DDR_ECC
  56 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  57 #endif
  58
  59 #define CONFIG_ENABLE_36BIT_PHYS
  60
  61 /*
  62  *  Config the L3 Cache as L3 SRAM
  63  */
  64 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  65 #define CONFIG_SYS_L3_SIZE              (512 << 10)
  66 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  67
  68 #define CONFIG_SYS_DCSRBAR              0xf0000000
  69 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  70
  71 /*
  72  * DDR Setup
  73  */
  74 #define CONFIG_VERY_BIG_RAM
  75 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  76 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  77
  78 /*
  79  * IFC Definitions
  80  */
  81 #define CONFIG_SYS_FLASH_BASE   0xe0000000
  82 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
  83
  84 #define CONFIG_HWCONFIG
  85
  86 /* define to use L1 as initial stack */
  87 #define CONFIG_L1_INIT_RAM
  88 #define CONFIG_SYS_INIT_RAM_LOCK
  89 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
  90 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
  91 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
  92 /* The assembler doesn't like typecast */
  93 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
  94         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
  95           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
  96 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
  97
  98 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  99
 100 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 101
 102 /* Serial Port - controlled on board with jumper J8
 103  * open - index 2
 104  * shorted - index 1
 105  */
 106 #define CONFIG_SYS_NS16550_SERIAL
 107 #define CONFIG_SYS_NS16550_REG_SIZE     1
 108 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 109
 110 #define CONFIG_SYS_BAUDRATE_TABLE       \
 111         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 112
 113 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 114 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 115 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 116 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 117
 118 /* I2C */
 119
 120 /*
 121  * General PCI
 122  * Memory space is mapped 1-1, but I/O space must start from 0.
 123  */
 124
 125 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 126 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 127 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 128 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 129 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 130
 131 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 132 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 133 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 134 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 135 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 136
 137 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 138 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 139 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 140 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 141 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 142
 143 /* controller 4, Base address 203000 */
 144 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 145 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 146 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 147
 148 #ifdef CONFIG_PCI
 149 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 150 #endif  /* CONFIG_PCI */
 151
 152 /*
 153  * Environment
 154  */
 155 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 156 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 157
 158 /*
 159  * Miscellaneous configurable options
 160  */
 161
 162 /*
 163  * For booting Linux, the board info and command line data
 164  * have to be in the first 64 MB of memory, since this is
 165  * the maximum mapped by the Linux kernel during initialization.
 166  */
 167 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 168 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 169
 170 /*
 171  * Environment Configuration
 172  */
 173 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 174 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 175
 176 #define HVBOOT                                  \
 177         "setenv bootargs config-addr=0x60000000; "      \
 178         "bootm 0x01000000 - 0x00f00000"
 179
 180 /*
 181  * DDR Setup
 182  */
 183 #define CONFIG_SYS_SPD_BUS_NUM  0
 184 #define SPD_EEPROM_ADDRESS1     0x52
 185 #define SPD_EEPROM_ADDRESS2     0x54
 186 #define SPD_EEPROM_ADDRESS3     0x56
 187 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 188 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 189
 190 /*
 191  * IFC Definitions
 192  */
 193 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 194 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 195                                 + 0x8000000) | \
 196                                 CSPR_PORT_SIZE_16 | \
 197                                 CSPR_MSEL_NOR | \
 198                                 CSPR_V)
 199 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 200 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 201                                 CSPR_PORT_SIZE_16 | \
 202                                 CSPR_MSEL_NOR | \
 203                                 CSPR_V)
 204 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 205 /* NOR Flash Timing Params */
 206 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 207
 208 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 209                                 FTIM0_NOR_TEADC(0x5) | \
 210                                 FTIM0_NOR_TEAHC(0x5))
 211 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 212                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 213                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 214 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 215                                 FTIM2_NOR_TCH(0x4) | \
 216                                 FTIM2_NOR_TWPH(0x0E) | \
 217                                 FTIM2_NOR_TWP(0x1c))
 218 #define CONFIG_SYS_NOR_FTIM3    0x0
 219
 220 #define CONFIG_SYS_FLASH_QUIET_TEST
 221 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 222
 223 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 224 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 225 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 226
 227 #define CONFIG_SYS_FLASH_EMPTY_INFO
 228 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 229                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 230
 231 /* NAND Flash on IFC */
 232 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 233 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 234 #define CONFIG_SYS_NAND_BASE            0xff800000
 235 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 236
 237 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 238 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 239                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 240                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 241                                 | CSPR_V)
 242 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 243
 244 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 245                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 246                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 247                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 248                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 249                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 250                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 251
 252 /* ONFI NAND Flash mode0 Timing Params */
 253 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 254                                         FTIM0_NAND_TWP(0x18)   | \
 255                                         FTIM0_NAND_TWCHT(0x07) | \
 256                                         FTIM0_NAND_TWH(0x0a))
 257 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 258                                         FTIM1_NAND_TWBE(0x39)  | \
 259                                         FTIM1_NAND_TRR(0x0e)   | \
 260                                         FTIM1_NAND_TRP(0x18))
 261 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 262                                         FTIM2_NAND_TREH(0x0a) | \
 263                                         FTIM2_NAND_TWHRE(0x1e))
 264 #define CONFIG_SYS_NAND_FTIM3           0x0
 265
 266 #define CONFIG_SYS_NAND_DDR_LAW         11
 267 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 268 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 269
 270 #if defined(CONFIG_MTD_RAW_NAND)
 271 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 272 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 273 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 274 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 275 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 276 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 277 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 278 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 279 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 280 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 281 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 282 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 283 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 284 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 285 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 286 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 287 #else
 288 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 289 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 290 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 291 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 292 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 293 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 294 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 295 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 296 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 297 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 298 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 299 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 300 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 301 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 302 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 303 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 304 #endif
 305 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 306 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 307 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 308 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 309 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 310 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 311 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 312 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 313
 314 /* CPLD on IFC */
 315 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 316 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 317 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 318 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 319                                 | CSPR_PORT_SIZE_8 \
 320                                 | CSPR_MSEL_GPCM \
 321                                 | CSPR_V)
 322
 323 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 324 #define CONFIG_SYS_CSOR3        0x0
 325
 326 /* CPLD Timing parameters for IFC CS3 */
 327 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 328                                         FTIM0_GPCM_TEADC(0x0e) | \
 329                                         FTIM0_GPCM_TEAHC(0x0e))
 330 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 331                                         FTIM1_GPCM_TRAD(0x1f))
 332 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 333                                         FTIM2_GPCM_TCH(0x8) | \
 334                                         FTIM2_GPCM_TWP(0x1f))
 335 #define CONFIG_SYS_CS3_FTIM3            0x0
 336
 337 #if defined(CONFIG_RAMBOOT_PBL)
 338 #define CONFIG_SYS_RAMBOOT
 339 #endif
 340
 341 /* I2C */
 342 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 343 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 344
 345 #define I2C_MUX_CH_DEFAULT      0x8
 346 #define I2C_MUX_CH_VOL_MONITOR  0xa
 347 #define I2C_MUX_CH_VSC3316_FS   0xc
 348 #define I2C_MUX_CH_VSC3316_BS   0xd
 349
 350 /* Voltage monitor on channel 2*/
 351 #define I2C_VOL_MONITOR_ADDR            0x40
 352 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 353 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 354 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 355
 356 /* The lowest and highest voltage allowed for T4240RDB */
 357 #define VDD_MV_MIN                      819
 358 #define VDD_MV_MAX                      1212
 359
 360 /*
 361  * eSPI - Enhanced SPI
 362  */
 363
 364 /* Qman/Bman */
 365 #ifndef CONFIG_NOBQFMAN
 366 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 367 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 368 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 369 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 370 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 371 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 372 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 373 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 374 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 375                                         CONFIG_SYS_BMAN_CENA_SIZE)
 376 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 377 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 378 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 379 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 380 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 381 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 382 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 383 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 384 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 385 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 386 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 387                                         CONFIG_SYS_QMAN_CENA_SIZE)
 388 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 389 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 390
 391 #define CONFIG_SYS_DPAA_FMAN
 392 #define CONFIG_SYS_DPAA_PME
 393 #define CONFIG_SYS_PMAN
 394 #define CONFIG_SYS_DPAA_DCE
 395 #define CONFIG_SYS_DPAA_RMAN
 396 #define CONFIG_SYS_INTERLAKEN
 397
 398 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 399 #endif /* CONFIG_NOBQFMAN */
 400
 401 #ifdef CONFIG_SYS_DPAA_FMAN
 402 #define SGMII_PHY_ADDR1 0x0
 403 #define SGMII_PHY_ADDR2 0x1
 404 #define SGMII_PHY_ADDR3 0x2
 405 #define SGMII_PHY_ADDR4 0x3
 406 #define SGMII_PHY_ADDR5 0x4
 407 #define SGMII_PHY_ADDR6 0x5
 408 #define SGMII_PHY_ADDR7 0x6
 409 #define SGMII_PHY_ADDR8 0x7
 410 #define FM1_10GEC1_PHY_ADDR     0x10
 411 #define FM1_10GEC2_PHY_ADDR     0x11
 412 #define FM2_10GEC1_PHY_ADDR     0x12
 413 #define FM2_10GEC2_PHY_ADDR     0x13
 414 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 415 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 416 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 417 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 418 #endif
 419
 420 /*
 421 * USB
 422 */
 423
 424 #ifdef CONFIG_MMC
 425 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 426 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 427 #endif
 428
 429
 430 #define __USB_PHY_TYPE  utmi
 431
 432 /*
 433  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 434  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 435  * interleaving. It can be cacheline, page, bank, superbank.
 436  * See doc/README.fsl-ddr for details.
 437  */
 438 #ifdef CONFIG_ARCH_T4240
 439 #define CTRL_INTLV_PREFERED 3way_4KB
 440 #else
 441 #define CTRL_INTLV_PREFERED cacheline
 442 #endif
 443
 444 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 445         "hwconfig=fsl_ddr:"                                     \
 446         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 447         "bank_intlv=auto;"                                      \
 448         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 449         "netdev=eth0\0"                                         \
 450         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 451         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 452         "tftpflash=tftpboot $loadaddr $uboot && "               \
 453         "protect off $ubootaddr +$filesize && "                 \
 454         "erase $ubootaddr +$filesize && "                       \
 455         "cp.b $loadaddr $ubootaddr $filesize && "               \
 456         "protect on $ubootaddr +$filesize && "                  \
 457         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 458         "consoledev=ttyS0\0"                                    \
 459         "ramdiskaddr=2000000\0"                                 \
 460         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 461         "fdtaddr=1e00000\0"                                     \
 462         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 463         "bdev=sda3\0"
 464
 465 #define HVBOOT                                  \
 466         "setenv bootargs config-addr=0x60000000; "      \
 467         "bootm 0x01000000 - 0x00f00000"
 468
 469 #include <asm/fsl_secure_boot.h>
 470
 471 #endif  /* __CONFIG_H */