include/configs/T4240RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #define CONFIG_FSL_SATA_V2
  16 #define CONFIG_PCIE4
  17
  18 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  19
  20 #ifdef CONFIG_RAMBOOT_PBL
  21 #ifndef CONFIG_SDCARD
  22 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  23 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  24 #else
  25 #define CONFIG_SPL_FLUSH_IMAGE
  26 #define CONFIG_SPL_PAD_TO               0x40000
  27 #define CONFIG_SPL_MAX_SIZE             0x28000
  28 #define RESET_VECTOR_OFFSET             0x27FFC
  29 #define BOOT_PAGE_OFFSET                0x27000
  30
  31 #ifdef  CONFIG_SDCARD
  32 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  33 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  34 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  35 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  36 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  37 #ifndef CONFIG_SPL_BUILD
  38 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  39 #endif
  40 #endif
  41
  42 #ifdef CONFIG_SPL_BUILD
  43 #define CONFIG_SPL_SKIP_RELOCATE
  44 #define CONFIG_SPL_COMMON_INIT_DDR
  45 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  46 #endif
  47
  48 #endif
  49 #endif /* CONFIG_RAMBOOT_PBL */
  50
  51 /* High Level Configuration Options */
  52 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  53
  54 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  55 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  56 #endif
  57
  58 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  59 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  60 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  61 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  62 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  63
  64 /*
  65  * These can be toggled for performance analysis, otherwise use default.
  66  */
  67 #define CONFIG_SYS_CACHE_STASHING
  68 #define CONFIG_BTB                      /* toggle branch predition */
  69 #ifdef CONFIG_DDR_ECC
  70 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  71 #endif
  72
  73 #define CONFIG_ENABLE_36BIT_PHYS
  74
  75 /*
  76  *  Config the L3 Cache as L3 SRAM
  77  */
  78 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  79 #define CONFIG_SYS_L3_SIZE              (512 << 10)
  80 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
  81 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  82 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
  83 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
  84 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
  85
  86 #define CONFIG_SYS_DCSRBAR              0xf0000000
  87 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  88
  89 /*
  90  * DDR Setup
  91  */
  92 #define CONFIG_VERY_BIG_RAM
  93 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  94 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  95
  96 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  97 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  98
  99 /*
 100  * IFC Definitions
 101  */
 102 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 103 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 104
 105 #ifdef CONFIG_SPL_BUILD
 106 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 107 #else
 108 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 109 #endif
 110
 111 #define CONFIG_HWCONFIG
 112
 113 /* define to use L1 as initial stack */
 114 #define CONFIG_L1_INIT_RAM
 115 #define CONFIG_SYS_INIT_RAM_LOCK
 116 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 117 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 118 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 119 /* The assembler doesn't like typecast */
 120 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 121         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 122           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 123 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 124
 125 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 126                                         GENERATED_GBL_DATA_SIZE)
 127 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 128
 129 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 130
 131 /* Serial Port - controlled on board with jumper J8
 132  * open - index 2
 133  * shorted - index 1
 134  */
 135 #define CONFIG_SYS_NS16550_SERIAL
 136 #define CONFIG_SYS_NS16550_REG_SIZE     1
 137 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 138
 139 #define CONFIG_SYS_BAUDRATE_TABLE       \
 140         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 141
 142 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 143 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 144 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 145 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 146
 147 /* I2C */
 148
 149 /*
 150  * General PCI
 151  * Memory space is mapped 1-1, but I/O space must start from 0.
 152  */
 153
 154 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 155 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 156 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 157 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 158 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 159
 160 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 161 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 162 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 163 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 164 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 165
 166 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 167 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 168 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 169 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 170 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 171
 172 /* controller 4, Base address 203000 */
 173 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 174 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 175 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 176
 177 #ifdef CONFIG_PCI
 178 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 179 #endif  /* CONFIG_PCI */
 180
 181 /* SATA */
 182 #ifdef CONFIG_FSL_SATA_V2
 183 #define CONFIG_SATA1
 184 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 185 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 186 #define CONFIG_SATA2
 187 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 188 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 189
 190 #define CONFIG_LBA48
 191 #endif
 192
 193 #ifdef CONFIG_FMAN_ENET
 194 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 195 #endif
 196
 197 /*
 198  * Environment
 199  */
 200 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 201 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 202
 203 /*
 204  * Miscellaneous configurable options
 205  */
 206
 207 /*
 208  * For booting Linux, the board info and command line data
 209  * have to be in the first 64 MB of memory, since this is
 210  * the maximum mapped by the Linux kernel during initialization.
 211  */
 212 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 213 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 214
 215 /*
 216  * Environment Configuration
 217  */
 218 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 219 #define CONFIG_BOOTFILE         "uImage"
 220 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 221
 222 #define HVBOOT                                  \
 223         "setenv bootargs config-addr=0x60000000; "      \
 224         "bootm 0x01000000 - 0x00f00000"
 225
 226 /*
 227  * DDR Setup
 228  */
 229 #define CONFIG_SYS_SPD_BUS_NUM  0
 230 #define SPD_EEPROM_ADDRESS1     0x52
 231 #define SPD_EEPROM_ADDRESS2     0x54
 232 #define SPD_EEPROM_ADDRESS3     0x56
 233 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 234 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 235
 236 /*
 237  * IFC Definitions
 238  */
 239 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 240 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 241                                 + 0x8000000) | \
 242                                 CSPR_PORT_SIZE_16 | \
 243                                 CSPR_MSEL_NOR | \
 244                                 CSPR_V)
 245 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 246 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 247                                 CSPR_PORT_SIZE_16 | \
 248                                 CSPR_MSEL_NOR | \
 249                                 CSPR_V)
 250 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 251 /* NOR Flash Timing Params */
 252 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 253
 254 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 255                                 FTIM0_NOR_TEADC(0x5) | \
 256                                 FTIM0_NOR_TEAHC(0x5))
 257 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 258                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 259                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 260 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 261                                 FTIM2_NOR_TCH(0x4) | \
 262                                 FTIM2_NOR_TWPH(0x0E) | \
 263                                 FTIM2_NOR_TWP(0x1c))
 264 #define CONFIG_SYS_NOR_FTIM3    0x0
 265
 266 #define CONFIG_SYS_FLASH_QUIET_TEST
 267 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 268
 269 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 270 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 271 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 272
 273 #define CONFIG_SYS_FLASH_EMPTY_INFO
 274 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 275                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 276
 277 /* NAND Flash on IFC */
 278 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 279 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 280 #define CONFIG_SYS_NAND_BASE            0xff800000
 281 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 282
 283 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 284 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 285                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 286                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 287                                 | CSPR_V)
 288 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 289
 290 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 291                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 292                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 293                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 294                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 295                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 296                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 297
 298 /* ONFI NAND Flash mode0 Timing Params */
 299 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 300                                         FTIM0_NAND_TWP(0x18)   | \
 301                                         FTIM0_NAND_TWCHT(0x07) | \
 302                                         FTIM0_NAND_TWH(0x0a))
 303 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 304                                         FTIM1_NAND_TWBE(0x39)  | \
 305                                         FTIM1_NAND_TRR(0x0e)   | \
 306                                         FTIM1_NAND_TRP(0x18))
 307 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 308                                         FTIM2_NAND_TREH(0x0a) | \
 309                                         FTIM2_NAND_TWHRE(0x1e))
 310 #define CONFIG_SYS_NAND_FTIM3           0x0
 311
 312 #define CONFIG_SYS_NAND_DDR_LAW         11
 313 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 314 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 315
 316 #if defined(CONFIG_MTD_RAW_NAND)
 317 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 318 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 319 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 320 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 321 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 322 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 323 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 324 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 325 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 326 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 327 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 328 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 329 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 330 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 331 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 332 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 333 #else
 334 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 335 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 336 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 337 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 338 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 339 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 340 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 341 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 342 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 343 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 344 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 345 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 346 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 347 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 348 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 349 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 350 #endif
 351 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 352 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 353 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 354 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 355 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 356 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 357 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 358 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 359
 360 /* CPLD on IFC */
 361 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 362 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 363 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 364 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 365                                 | CSPR_PORT_SIZE_8 \
 366                                 | CSPR_MSEL_GPCM \
 367                                 | CSPR_V)
 368
 369 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 370 #define CONFIG_SYS_CSOR3        0x0
 371
 372 /* CPLD Timing parameters for IFC CS3 */
 373 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 374                                         FTIM0_GPCM_TEADC(0x0e) | \
 375                                         FTIM0_GPCM_TEAHC(0x0e))
 376 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 377                                         FTIM1_GPCM_TRAD(0x1f))
 378 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 379                                         FTIM2_GPCM_TCH(0x8) | \
 380                                         FTIM2_GPCM_TWP(0x1f))
 381 #define CONFIG_SYS_CS3_FTIM3            0x0
 382
 383 #if defined(CONFIG_RAMBOOT_PBL)
 384 #define CONFIG_SYS_RAMBOOT
 385 #endif
 386
 387 /* I2C */
 388 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 389 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 390
 391 #define I2C_MUX_CH_DEFAULT      0x8
 392 #define I2C_MUX_CH_VOL_MONITOR  0xa
 393 #define I2C_MUX_CH_VSC3316_FS   0xc
 394 #define I2C_MUX_CH_VSC3316_BS   0xd
 395
 396 /* Voltage monitor on channel 2*/
 397 #define I2C_VOL_MONITOR_ADDR            0x40
 398 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 399 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 400 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 401
 402 /* The lowest and highest voltage allowed for T4240RDB */
 403 #define VDD_MV_MIN                      819
 404 #define VDD_MV_MAX                      1212
 405
 406 /*
 407  * eSPI - Enhanced SPI
 408  */
 409
 410 /* Qman/Bman */
 411 #ifndef CONFIG_NOBQFMAN
 412 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 413 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 414 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 415 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 416 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 417 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 418 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 419 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 420 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 421                                         CONFIG_SYS_BMAN_CENA_SIZE)
 422 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 423 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 424 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 425 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 426 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 427 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 428 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 429 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 430 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 431 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 432 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 433                                         CONFIG_SYS_QMAN_CENA_SIZE)
 434 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 435 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 436
 437 #define CONFIG_SYS_DPAA_FMAN
 438 #define CONFIG_SYS_DPAA_PME
 439 #define CONFIG_SYS_PMAN
 440 #define CONFIG_SYS_DPAA_DCE
 441 #define CONFIG_SYS_DPAA_RMAN
 442 #define CONFIG_SYS_INTERLAKEN
 443
 444 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 445 #endif /* CONFIG_NOBQFMAN */
 446
 447 #ifdef CONFIG_SYS_DPAA_FMAN
 448 #define SGMII_PHY_ADDR1 0x0
 449 #define SGMII_PHY_ADDR2 0x1
 450 #define SGMII_PHY_ADDR3 0x2
 451 #define SGMII_PHY_ADDR4 0x3
 452 #define SGMII_PHY_ADDR5 0x4
 453 #define SGMII_PHY_ADDR6 0x5
 454 #define SGMII_PHY_ADDR7 0x6
 455 #define SGMII_PHY_ADDR8 0x7
 456 #define FM1_10GEC1_PHY_ADDR     0x10
 457 #define FM1_10GEC2_PHY_ADDR     0x11
 458 #define FM2_10GEC1_PHY_ADDR     0x12
 459 #define FM2_10GEC2_PHY_ADDR     0x13
 460 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 461 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 462 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 463 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 464 #endif
 465
 466 /* SATA */
 467 #ifdef CONFIG_FSL_SATA_V2
 468 #define CONFIG_SATA1
 469 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 470 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 471 #define CONFIG_SATA2
 472 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 473 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 474
 475 #define CONFIG_LBA48
 476 #endif
 477
 478 #ifdef CONFIG_FMAN_ENET
 479 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 480 #endif
 481
 482 /*
 483 * USB
 484 */
 485 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 486 #define CONFIG_HAS_FSL_DR_USB
 487
 488 #ifdef CONFIG_MMC
 489 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 490 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 491 #endif
 492
 493
 494 #define __USB_PHY_TYPE  utmi
 495
 496 /*
 497  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 498  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 499  * interleaving. It can be cacheline, page, bank, superbank.
 500  * See doc/README.fsl-ddr for details.
 501  */
 502 #ifdef CONFIG_ARCH_T4240
 503 #define CTRL_INTLV_PREFERED 3way_4KB
 504 #else
 505 #define CTRL_INTLV_PREFERED cacheline
 506 #endif
 507
 508 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 509         "hwconfig=fsl_ddr:"                                     \
 510         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 511         "bank_intlv=auto;"                                      \
 512         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 513         "netdev=eth0\0"                                         \
 514         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 515         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 516         "tftpflash=tftpboot $loadaddr $uboot && "               \
 517         "protect off $ubootaddr +$filesize && "                 \
 518         "erase $ubootaddr +$filesize && "                       \
 519         "cp.b $loadaddr $ubootaddr $filesize && "               \
 520         "protect on $ubootaddr +$filesize && "                  \
 521         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 522         "consoledev=ttyS0\0"                                    \
 523         "ramdiskaddr=2000000\0"                                 \
 524         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 525         "fdtaddr=1e00000\0"                                     \
 526         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 527         "bdev=sda3\0"
 528
 529 #define HVBOOT                                  \
 530         "setenv bootargs config-addr=0x60000000; "      \
 531         "bootm 0x01000000 - 0x00f00000"
 532
 533 #include <asm/fsl_secure_boot.h>
 534
 535 #endif  /* __CONFIG_H */