include/configs/T4240RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * T4240 RDB board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include <linux/stringify.h>
  14
  15 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #ifndef CONFIG_SDCARD
  19 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_TEXT_BASE
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  21 #else
  22 #define RESET_VECTOR_OFFSET             0x27FFC
  23 #define BOOT_PAGE_OFFSET                0x27000
  24
  25 #ifdef  CONFIG_SDCARD
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  27 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  28 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  29 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  30 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  31 #endif
  32
  33 #endif
  34 #endif /* CONFIG_RAMBOOT_PBL */
  35
  36 /* High Level Configuration Options */
  37
  38 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  39 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  40 #endif
  41
  42 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  43
  44 /*
  45  * These can be toggled for performance analysis, otherwise use default.
  46  */
  47 #ifdef CONFIG_DDR_ECC
  48 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  49 #endif
  50
  51 /*
  52  *  Config the L3 Cache as L3 SRAM
  53  */
  54 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  55 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  56
  57 #define CONFIG_SYS_DCSRBAR              0xf0000000
  58 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  59
  60 /*
  61  * DDR Setup
  62  */
  63 #define CONFIG_VERY_BIG_RAM
  64 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  65 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  66
  67 /*
  68  * IFC Definitions
  69  */
  70 #define CONFIG_SYS_FLASH_BASE   0xe0000000
  71 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
  72
  73 #define CONFIG_HWCONFIG
  74
  75 /* define to use L1 as initial stack */
  76 #define CONFIG_L1_INIT_RAM
  77 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
  78 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
  79 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
  80 /* The assembler doesn't like typecast */
  81 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
  82         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
  83           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
  84 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
  85
  86 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  87
  88 /* Serial Port - controlled on board with jumper J8
  89  * open - index 2
  90  * shorted - index 1
  91  */
  92 #define CONFIG_SYS_NS16550_SERIAL
  93 #define CONFIG_SYS_NS16550_REG_SIZE     1
  94 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
  95
  96 #define CONFIG_SYS_BAUDRATE_TABLE       \
  97         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
  98
  99 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 100 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 101 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 102 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 103
 104 /* I2C */
 105
 106 /*
 107  * General PCI
 108  * Memory space is mapped 1-1, but I/O space must start from 0.
 109  */
 110
 111 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 112 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 113 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 114 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 115 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 116
 117 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 118 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 119 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 120 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 121 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 122
 123 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 124 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 125 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 126 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 127 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 128
 129 /* controller 4, Base address 203000 */
 130 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 131 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc60000000ull
 132 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 133
 134 /*
 135  * Miscellaneous configurable options
 136  */
 137
 138 /*
 139  * For booting Linux, the board info and command line data
 140  * have to be in the first 64 MB of memory, since this is
 141  * the maximum mapped by the Linux kernel during initialization.
 142  */
 143 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 144
 145 /*
 146  * Environment Configuration
 147  */
 148 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 149 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 150
 151 #define HVBOOT                                  \
 152         "setenv bootargs config-addr=0x60000000; "      \
 153         "bootm 0x01000000 - 0x00f00000"
 154
 155 /*
 156  * DDR Setup
 157  */
 158 #define SPD_EEPROM_ADDRESS1     0x52
 159 #define SPD_EEPROM_ADDRESS2     0x54
 160 #define SPD_EEPROM_ADDRESS3     0x56
 161 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 162 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 163
 164 /*
 165  * IFC Definitions
 166  */
 167 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 168 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 169                                 + 0x8000000) | \
 170                                 CSPR_PORT_SIZE_16 | \
 171                                 CSPR_MSEL_NOR | \
 172                                 CSPR_V)
 173 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 174 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 175                                 CSPR_PORT_SIZE_16 | \
 176                                 CSPR_MSEL_NOR | \
 177                                 CSPR_V)
 178 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 179 /* NOR Flash Timing Params */
 180 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 181
 182 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 183                                 FTIM0_NOR_TEADC(0x5) | \
 184                                 FTIM0_NOR_TEAHC(0x5))
 185 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 186                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 187                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 188 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 189                                 FTIM2_NOR_TCH(0x4) | \
 190                                 FTIM2_NOR_TWPH(0x0E) | \
 191                                 FTIM2_NOR_TWP(0x1c))
 192 #define CONFIG_SYS_NOR_FTIM3    0x0
 193
 194 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 195
 196 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 197                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 198
 199 /* NAND Flash on IFC */
 200 #define CFG_SYS_NAND_BASE               0xff800000
 201 #define CFG_SYS_NAND_BASE_PHYS  (0xf00000000ull | CFG_SYS_NAND_BASE)
 202
 203 #define CFG_SYS_NAND_CSPR_EXT   (0xf)
 204 #define CFG_SYS_NAND_CSPR       (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \
 205                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 206                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 207                                 | CSPR_V)
 208 #define CFG_SYS_NAND_AMASK      IFC_AMASK(64*1024)
 209
 210 #define CFG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 211                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 212                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 213                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 214                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 215                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 216                                 | CSOR_NAND_PB(128))    /*Page Per Block = 128*/
 217
 218 /* ONFI NAND Flash mode0 Timing Params */
 219 #define CFG_SYS_NAND_FTIM0              (FTIM0_NAND_TCCST(0x07) | \
 220                                         FTIM0_NAND_TWP(0x18)   | \
 221                                         FTIM0_NAND_TWCHT(0x07) | \
 222                                         FTIM0_NAND_TWH(0x0a))
 223 #define CFG_SYS_NAND_FTIM1              (FTIM1_NAND_TADLE(0x32) | \
 224                                         FTIM1_NAND_TWBE(0x39)  | \
 225                                         FTIM1_NAND_TRR(0x0e)   | \
 226                                         FTIM1_NAND_TRP(0x18))
 227 #define CFG_SYS_NAND_FTIM2              (FTIM2_NAND_TRAD(0x0f) | \
 228                                         FTIM2_NAND_TREH(0x0a) | \
 229                                         FTIM2_NAND_TWHRE(0x1e))
 230 #define CFG_SYS_NAND_FTIM3              0x0
 231
 232 #define CFG_SYS_NAND_BASE_LIST  { CFG_SYS_NAND_BASE }
 233
 234 #if defined(CONFIG_MTD_RAW_NAND)
 235 #define CONFIG_SYS_CSPR0_EXT            CFG_SYS_NAND_CSPR_EXT
 236 #define CONFIG_SYS_CSPR0                CFG_SYS_NAND_CSPR
 237 #define CONFIG_SYS_AMASK0               CFG_SYS_NAND_AMASK
 238 #define CONFIG_SYS_CSOR0                CFG_SYS_NAND_CSOR
 239 #define CONFIG_SYS_CS0_FTIM0            CFG_SYS_NAND_FTIM0
 240 #define CONFIG_SYS_CS0_FTIM1            CFG_SYS_NAND_FTIM1
 241 #define CONFIG_SYS_CS0_FTIM2            CFG_SYS_NAND_FTIM2
 242 #define CONFIG_SYS_CS0_FTIM3            CFG_SYS_NAND_FTIM3
 243 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 244 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 245 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 246 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 247 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 248 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 249 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 250 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 251 #else
 252 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 253 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 254 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 255 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 256 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 257 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 258 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 259 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 260 #define CONFIG_SYS_CSPR1_EXT            CFG_SYS_NAND_CSPR_EXT
 261 #define CONFIG_SYS_CSPR1                CFG_SYS_NAND_CSPR
 262 #define CONFIG_SYS_AMASK1               CFG_SYS_NAND_AMASK
 263 #define CONFIG_SYS_CSOR1                CFG_SYS_NAND_CSOR
 264 #define CONFIG_SYS_CS1_FTIM0            CFG_SYS_NAND_FTIM0
 265 #define CONFIG_SYS_CS1_FTIM1            CFG_SYS_NAND_FTIM1
 266 #define CONFIG_SYS_CS1_FTIM2            CFG_SYS_NAND_FTIM2
 267 #define CONFIG_SYS_CS1_FTIM3            CFG_SYS_NAND_FTIM3
 268 #endif
 269 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 270 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 271 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 272 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 273 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 274 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 275 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 276 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 277
 278 /* CPLD on IFC */
 279 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 280 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 281 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 282 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 283                                 | CSPR_PORT_SIZE_8 \
 284                                 | CSPR_MSEL_GPCM \
 285                                 | CSPR_V)
 286
 287 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 288 #define CONFIG_SYS_CSOR3        0x0
 289
 290 /* CPLD Timing parameters for IFC CS3 */
 291 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 292                                         FTIM0_GPCM_TEADC(0x0e) | \
 293                                         FTIM0_GPCM_TEAHC(0x0e))
 294 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 295                                         FTIM1_GPCM_TRAD(0x1f))
 296 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 297                                         FTIM2_GPCM_TCH(0x8) | \
 298                                         FTIM2_GPCM_TWP(0x1f))
 299 #define CONFIG_SYS_CS3_FTIM3            0x0
 300
 301 /* I2C */
 302 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 303 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 304
 305 #define I2C_MUX_CH_DEFAULT      0x8
 306 #define I2C_MUX_CH_VOL_MONITOR  0xa
 307 #define I2C_MUX_CH_VSC3316_FS   0xc
 308 #define I2C_MUX_CH_VSC3316_BS   0xd
 309
 310 /* Voltage monitor on channel 2*/
 311 #define I2C_VOL_MONITOR_ADDR            0x40
 312 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 313 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 314 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 315
 316 /* The lowest and highest voltage allowed for T4240RDB */
 317 #define VDD_MV_MIN                      819
 318 #define VDD_MV_MAX                      1212
 319
 320 /*
 321  * eSPI - Enhanced SPI
 322  */
 323
 324 /* Qman/Bman */
 325 #ifndef CONFIG_NOBQFMAN
 326 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 327 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 328 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 329 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 330 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 331 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 332 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 333 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 334 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 335                                         CONFIG_SYS_BMAN_CENA_SIZE)
 336 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 337 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 338 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 339 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 340 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 341 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 342 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 343 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 344 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 345 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 346 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 347                                         CONFIG_SYS_QMAN_CENA_SIZE)
 348 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 349 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 350
 351 #define CONFIG_SYS_DPAA_FMAN
 352 #define CONFIG_SYS_DPAA_PME
 353 #define CONFIG_SYS_PMAN
 354 #define CONFIG_SYS_DPAA_DCE
 355 #define CONFIG_SYS_DPAA_RMAN
 356 #endif /* CONFIG_NOBQFMAN */
 357
 358 #ifdef CONFIG_SYS_DPAA_FMAN
 359 #define SGMII_PHY_ADDR1 0x0
 360 #define SGMII_PHY_ADDR2 0x1
 361 #define SGMII_PHY_ADDR3 0x2
 362 #define SGMII_PHY_ADDR4 0x3
 363 #define SGMII_PHY_ADDR5 0x4
 364 #define SGMII_PHY_ADDR6 0x5
 365 #define SGMII_PHY_ADDR7 0x6
 366 #define SGMII_PHY_ADDR8 0x7
 367 #define FM1_10GEC1_PHY_ADDR     0x10
 368 #define FM1_10GEC2_PHY_ADDR     0x11
 369 #define FM2_10GEC1_PHY_ADDR     0x12
 370 #define FM2_10GEC2_PHY_ADDR     0x13
 371 #define CORTINA_PHY_ADDR1       FM1_10GEC1_PHY_ADDR
 372 #define CORTINA_PHY_ADDR2       FM1_10GEC2_PHY_ADDR
 373 #define CORTINA_PHY_ADDR3       FM2_10GEC1_PHY_ADDR
 374 #define CORTINA_PHY_ADDR4       FM2_10GEC2_PHY_ADDR
 375 #endif
 376
 377 /*
 378 * USB
 379 */
 380
 381 #ifdef CONFIG_MMC
 382 #define CFG_SYS_FSL_ESDHC_ADDR       CFG_SYS_MPC85xx_ESDHC_ADDR
 383 #endif
 384
 385
 386 #define __USB_PHY_TYPE  utmi
 387
 388 /*
 389  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 390  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 391  * interleaving. It can be cacheline, page, bank, superbank.
 392  * See doc/README.fsl-ddr for details.
 393  */
 394 #ifdef CONFIG_ARCH_T4240
 395 #define CTRL_INTLV_PREFERED 3way_4KB
 396 #else
 397 #define CTRL_INTLV_PREFERED cacheline
 398 #endif
 399
 400 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 401         "hwconfig=fsl_ddr:"                                     \
 402         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 403         "bank_intlv=auto;"                                      \
 404         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 405         "netdev=eth0\0"                                         \
 406         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 407         "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
 408         "tftpflash=tftpboot $loadaddr $uboot && "               \
 409         "protect off $ubootaddr +$filesize && "                 \
 410         "erase $ubootaddr +$filesize && "                       \
 411         "cp.b $loadaddr $ubootaddr $filesize && "               \
 412         "protect on $ubootaddr +$filesize && "                  \
 413         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 414         "consoledev=ttyS0\0"                                    \
 415         "ramdiskaddr=2000000\0"                                 \
 416         "ramdiskfile=t4240rdb/ramdisk.uboot\0"                  \
 417         "fdtaddr=1e00000\0"                                     \
 418         "fdtfile=t4240rdb/t4240rdb.dtb\0"                       \
 419         "bdev=sda3\0"
 420
 421 #define HVBOOT                                  \
 422         "setenv bootargs config-addr=0x60000000; "      \
 423         "bootm 0x01000000 - 0x00f00000"
 424
 425 #include <asm/fsl_secure_boot.h>
 426
 427 #endif  /* __CONFIG_H */