include/configs/T4240QDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * T4240 QDS board configuration file
   8  */
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <linux/stringify.h>
  13
  14 #define CONFIG_FSL_SATA_V2
  15 #define CONFIG_PCIE4
  16
  17 #define CONFIG_ICS307_REFCLK_HZ         25000000  /* ICS307 ref clk freq */
  18
  19 #ifdef CONFIG_RAMBOOT_PBL
  20 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t4qds/t4_pbi.cfg
  21 #if !defined(CONFIG_MTD_RAW_NAND) && !defined(CONFIG_SDCARD)
  22 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  23 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  24 #else
  25 #define CONFIG_SPL_FLUSH_IMAGE
  26 #define CONFIG_SPL_PAD_TO               0x40000
  27 #define CONFIG_SPL_MAX_SIZE             0x28000
  28 #define RESET_VECTOR_OFFSET             0x27FFC
  29 #define BOOT_PAGE_OFFSET                0x27000
  30
  31 #ifdef  CONFIG_MTD_RAW_NAND
  32 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  33 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  34 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  35 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  36 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_nand_rcw.cfg
  37 #endif
  38
  39 #ifdef  CONFIG_SDCARD
  40 #define CONFIG_RESET_VECTOR_ADDRESS     0x200FFC
  41 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  42 #define CONFIG_SYS_MMC_U_BOOT_DST       0x00200000
  43 #define CONFIG_SYS_MMC_U_BOOT_START     0x00200000
  44 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  45 #ifndef CONFIG_SPL_BUILD
  46 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  47 #endif
  48 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t4qds/t4_sd_rcw.cfg
  49 #endif
  50
  51 #ifdef CONFIG_SPL_BUILD
  52 #define CONFIG_SPL_SKIP_RELOCATE
  53 #define CONFIG_SPL_COMMON_INIT_DDR
  54 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  55 #endif
  56
  57 #endif
  58 #endif /* CONFIG_RAMBOOT_PBL */
  59
  60 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  61 /* Set 1M boot space */
  62 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  63 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  64                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  65 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  66 #endif
  67
  68 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  69 #define CONFIG_DDR_ECC
  70
  71 #include "t4qds.h"
  72
  73 #if defined(CONFIG_SPIFLASH)
  74 #elif defined(CONFIG_SDCARD)
  75 #define CONFIG_SYS_MMC_ENV_DEV          0
  76 #endif
  77
  78 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
  79 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
  80
  81 #ifndef __ASSEMBLY__
  82 unsigned long get_board_sys_clk(void);
  83 unsigned long get_board_ddr_clk(void);
  84 #endif
  85
  86 /* EEPROM */
  87 #define CONFIG_ID_EEPROM
  88 #define CONFIG_SYS_I2C_EEPROM_NXID
  89 #define CONFIG_SYS_EEPROM_BUS_NUM       0
  90 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
  91 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
  92
  93 /*
  94  * DDR Setup
  95  */
  96 #define CONFIG_SYS_SPD_BUS_NUM  0
  97 #define SPD_EEPROM_ADDRESS1     0x51
  98 #define SPD_EEPROM_ADDRESS2     0x52
  99 #define SPD_EEPROM_ADDRESS3     0x53
 100 #define SPD_EEPROM_ADDRESS4     0x54
 101 #define SPD_EEPROM_ADDRESS5     0x55
 102 #define SPD_EEPROM_ADDRESS6     0x56
 103 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1     /* for p3041/p5010 */
 104 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 105
 106 /*
 107  * IFC Definitions
 108  */
 109 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 110 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 111                                 + 0x8000000) | \
 112                                 CSPR_PORT_SIZE_16 | \
 113                                 CSPR_MSEL_NOR | \
 114                                 CSPR_V)
 115 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 116 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 117                                 CSPR_PORT_SIZE_16 | \
 118                                 CSPR_MSEL_NOR | \
 119                                 CSPR_V)
 120 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 121 /* NOR Flash Timing Params */
 122 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 123
 124 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 125                                 FTIM0_NOR_TEADC(0x5) | \
 126                                 FTIM0_NOR_TEAHC(0x5))
 127 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 128                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 129                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 130 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 131                                 FTIM2_NOR_TCH(0x4) | \
 132                                 FTIM2_NOR_TWPH(0x0E) | \
 133                                 FTIM2_NOR_TWP(0x1c))
 134 #define CONFIG_SYS_NOR_FTIM3    0x0
 135
 136 #define CONFIG_SYS_FLASH_QUIET_TEST
 137 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 138
 139 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 140 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 141 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 142 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 143
 144 #define CONFIG_SYS_FLASH_EMPTY_INFO
 145 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 146                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 147
 148 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 149 #define QIXIS_BASE                      0xffdf0000
 150 #define QIXIS_LBMAP_SWITCH              6
 151 #define QIXIS_LBMAP_MASK                0x0f
 152 #define QIXIS_LBMAP_SHIFT               0
 153 #define QIXIS_LBMAP_DFLTBANK            0x00
 154 #define QIXIS_LBMAP_ALTBANK             0x04
 155 #define QIXIS_RST_CTL_RESET             0x83
 156 #define QIXIS_RST_FORCE_MEM             0x1
 157 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 158 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 159 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 160 #define QIXIS_BRDCFG5                   0x55
 161 #define QIXIS_MUX_SDHC                  2
 162 #define QIXIS_MUX_SDHC_WIDTH8           1
 163 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 164
 165 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 166 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 167                                 | CSPR_PORT_SIZE_8 \
 168                                 | CSPR_MSEL_GPCM \
 169                                 | CSPR_V)
 170 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 171 #define CONFIG_SYS_CSOR3        0x0
 172 /* QIXIS Timing parameters for IFC CS3 */
 173 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 174                                         FTIM0_GPCM_TEADC(0x0e) | \
 175                                         FTIM0_GPCM_TEAHC(0x0e))
 176 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 177                                         FTIM1_GPCM_TRAD(0x3f))
 178 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 179                                         FTIM2_GPCM_TCH(0x8) | \
 180                                         FTIM2_GPCM_TWP(0x1f))
 181 #define CONFIG_SYS_CS3_FTIM3            0x0
 182
 183 /* NAND Flash on IFC */
 184 #define CONFIG_NAND_FSL_IFC
 185 #define CONFIG_SYS_NAND_BASE            0xff800000
 186 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 187
 188 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 189 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 190                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 191                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 192                                 | CSPR_V)
 193 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 194
 195 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 196                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 197                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 198                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 199                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 200                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 201                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 202
 203 #define CONFIG_SYS_NAND_ONFI_DETECTION
 204
 205 /* ONFI NAND Flash mode0 Timing Params */
 206 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 207                                         FTIM0_NAND_TWP(0x18)   | \
 208                                         FTIM0_NAND_TWCHT(0x07) | \
 209                                         FTIM0_NAND_TWH(0x0a))
 210 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 211                                         FTIM1_NAND_TWBE(0x39)  | \
 212                                         FTIM1_NAND_TRR(0x0e)   | \
 213                                         FTIM1_NAND_TRP(0x18))
 214 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 215                                         FTIM2_NAND_TREH(0x0a) | \
 216                                         FTIM2_NAND_TWHRE(0x1e))
 217 #define CONFIG_SYS_NAND_FTIM3           0x0
 218
 219 #define CONFIG_SYS_NAND_DDR_LAW         11
 220
 221 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 222 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 223
 224 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 225 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 226 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 227
 228 #if defined(CONFIG_MTD_RAW_NAND)
 229 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 230 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 231 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 232 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 233 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 234 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 235 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 236 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 237 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 238 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 239 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 240 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 241 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 242 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 243 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 244 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 245 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 246 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 247 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 248 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 249 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 250 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 251 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 252 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 253 #else
 254 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 255 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 256 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 257 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 258 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 259 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 260 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 261 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 262 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 263 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 264 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 265 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 266 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 267 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 268 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 269 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 270 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 271 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 272 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 273 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 274 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 275 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 276 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 277 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 278 #endif
 279
 280 #if defined(CONFIG_RAMBOOT_PBL)
 281 #define CONFIG_SYS_RAMBOOT
 282 #endif
 283
 284 /* I2C */
 285 #ifndef CONFIG_DM_I2C
 286 #define CONFIG_SYS_I2C
 287 #else
 288 #undef CONFIG_SYS_I2C
 289 #undef CONFIG_SYS_FSL_I2C2_OFFSET
 290 #undef CONFIG_SYS_FSL_I2C2_SLAVE
 291 #undef CONFIG_SYS_FSL_I2C2_SPEED
 292 #undef CONFIG_SYS_FSL_I2C_SLAVE
 293 #undef CONFIG_SYS_FSL_I2C_SPEED
 294 #undef CONFIG_SYS_FSL_I2C_OFFSET
 295 #endif
 296
 297 #define CONFIG_SYS_I2C_FSL
 298 #define CONFIG_SYS_FSL_I2C_SPEED        100000  /* I2C speed */
 299 #define CONFIG_SYS_FSL_I2C2_SPEED       100000  /* I2C2 speed */
 300 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* I2C bus multiplexer,primary */
 301 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* I2C bus multiplexer,secondary */
 302
 303 #define I2C_MUX_CH_DEFAULT      0x8
 304 #define I2C_MUX_CH_VOL_MONITOR  0xa
 305 #define I2C_MUX_CH_VSC3316_FS   0xc
 306 #define I2C_MUX_CH_VSC3316_BS   0xd
 307
 308 /* Voltage monitor on channel 2*/
 309 #define I2C_VOL_MONITOR_ADDR            0x40
 310 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
 311 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
 312 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
 313
 314 /* VSC Crossbar switches */
 315 #define CONFIG_VSC_CROSSBAR
 316 #define VSC3316_FSM_TX_ADDR     0x70
 317 #define VSC3316_FSM_RX_ADDR     0x71
 318
 319 /*
 320  * RapidIO
 321  */
 322
 323 /*
 324  * for slave u-boot IMAGE instored in master memory space,
 325  * PHYS must be aligned based on the SIZE
 326  */
 327 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 328 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 329 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 330 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 331 /*
 332  * for slave UCODE and ENV instored in master memory space,
 333  * PHYS must be aligned based on the SIZE
 334  */
 335 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 336 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 337 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 338
 339 /* slave core release by master*/
 340 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 341 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 342
 343 /*
 344  * SRIO_PCIE_BOOT - SLAVE
 345  */
 346 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 347 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 348 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 349                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 350 #endif
 351 /*
 352  * eSPI - Enhanced SPI
 353  */
 354
 355 /* Qman/Bman */
 356 #ifndef CONFIG_NOBQFMAN
 357 #define CONFIG_SYS_BMAN_NUM_PORTALS     50
 358 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 359 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 360 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 361 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 362 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 363 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 364 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 365 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 366                                         CONFIG_SYS_BMAN_CENA_SIZE)
 367 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 368 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 369 #define CONFIG_SYS_QMAN_NUM_PORTALS     50
 370 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 371 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 372 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 373 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 374 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 375 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 376 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 377 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 378                                         CONFIG_SYS_QMAN_CENA_SIZE)
 379 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 380 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 381
 382 #define CONFIG_SYS_DPAA_FMAN
 383 #define CONFIG_SYS_DPAA_PME
 384 #define CONFIG_SYS_PMAN
 385 #define CONFIG_SYS_DPAA_DCE
 386 #define CONFIG_SYS_DPAA_RMAN
 387 #define CONFIG_SYS_INTERLAKEN
 388
 389 /* Default address of microcode for the Linux Fman driver */
 390 #if defined(CONFIG_SPIFLASH)
 391 /*
 392  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 393  * env, so we got 0x110000.
 394  */
 395 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 396 #elif defined(CONFIG_SDCARD)
 397 /*
 398  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 399  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 400  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 401  */
 402 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 403 #elif defined(CONFIG_MTD_RAW_NAND)
 404 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 405 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 406 /*
 407  * Slave has no ucode locally, it can fetch this from remote. When implementing
 408  * in two corenet boards, slave's ucode could be stored in master's memory
 409  * space, the address can be mapped from slave TLB->slave LAW->
 410  * slave SRIO or PCIE outbound window->master inbound window->
 411  * master LAW->the ucode address in master's memory space.
 412  */
 413 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 414 #else
 415 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 416 #endif
 417 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 418 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 419 #endif /* CONFIG_NOBQFMAN */
 420
 421 #ifdef CONFIG_SYS_DPAA_FMAN
 422 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 423 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 424 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 425 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 426 #define FM1_10GEC1_PHY_ADDR     0x0
 427 #define FM1_10GEC2_PHY_ADDR     0x1
 428 #define FM2_10GEC1_PHY_ADDR     0x2
 429 #define FM2_10GEC2_PHY_ADDR     0x3
 430 #endif
 431
 432 /* SATA */
 433 #ifdef CONFIG_FSL_SATA_V2
 434 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 435 #define CONFIG_SATA1
 436 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 437 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 438 #define CONFIG_SATA2
 439 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 440 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 441
 442 #define CONFIG_LBA48
 443 #endif
 444
 445 #ifdef CONFIG_FMAN_ENET
 446 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 447 #endif
 448
 449 /*
 450 * USB
 451 */
 452 #define CONFIG_USB_EHCI_FSL
 453 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 454 #define CONFIG_HAS_FSL_DR_USB
 455
 456 #ifdef CONFIG_MMC
 457 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 458 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 459 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 460 #define CONFIG_ESDHC_DETECT_QUIRK \
 461         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC) || \
 462         IS_SVR_REV(get_svr(), 1, 0))
 463 #define CONFIG_ESDHC_DETECT_8_BIT_QUIRK \
 464         (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
 465 #endif
 466
 467
 468 #define __USB_PHY_TYPE  utmi
 469
 470 /*
 471  * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
 472  * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
 473  * interleaving. It can be cacheline, page, bank, superbank.
 474  * See doc/README.fsl-ddr for details.
 475  */
 476 #ifdef CONFIG_ARCH_T4240
 477 #define CTRL_INTLV_PREFERED 3way_4KB
 478 #else
 479 #define CTRL_INTLV_PREFERED cacheline
 480 #endif
 481
 482 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 483         "hwconfig=fsl_ddr:"                                     \
 484         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 485         "bank_intlv=auto;"                                      \
 486         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 487         "netdev=eth0\0"                                         \
 488         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 489         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 490         "tftpflash=tftpboot $loadaddr $uboot && "               \
 491         "protect off $ubootaddr +$filesize && "                 \
 492         "erase $ubootaddr +$filesize && "                       \
 493         "cp.b $loadaddr $ubootaddr $filesize && "               \
 494         "protect on $ubootaddr +$filesize && "                  \
 495         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 496         "consoledev=ttyS0\0"                                    \
 497         "ramdiskaddr=2000000\0"                                 \
 498         "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
 499         "fdtaddr=1e00000\0"                                     \
 500         "fdtfile=t4240qds/t4240qds.dtb\0"                               \
 501         "bdev=sda3\0"
 502
 503 #define CONFIG_HVBOOT                           \
 504         "setenv bootargs config-addr=0x60000000; "      \
 505         "bootm 0x01000000 - 0x00f00000"
 506
 507 #define CONFIG_ALU                              \
 508         "setenv bootargs root=/dev/$bdev rw "           \
 509         "console=$consoledev,$baudrate $othbootargs;"   \
 510         "cpu 1 release 0x01000000 - - -;"               \
 511         "cpu 2 release 0x01000000 - - -;"               \
 512         "cpu 3 release 0x01000000 - - -;"               \
 513         "cpu 4 release 0x01000000 - - -;"               \
 514         "cpu 5 release 0x01000000 - - -;"               \
 515         "cpu 6 release 0x01000000 - - -;"               \
 516         "cpu 7 release 0x01000000 - - -;"               \
 517         "go 0x01000000"
 518
 519 #define CONFIG_LINUX                            \
 520         "setenv bootargs root=/dev/ram rw "             \
 521         "console=$consoledev,$baudrate $othbootargs;"   \
 522         "setenv ramdiskaddr 0x02000000;"                \
 523         "setenv fdtaddr 0x00c00000;"                    \
 524         "setenv loadaddr 0x1000000;"                    \
 525         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 526
 527 #define CONFIG_HDBOOT                                   \
 528         "setenv bootargs root=/dev/$bdev rw "           \
 529         "console=$consoledev,$baudrate $othbootargs;"   \
 530         "tftp $loadaddr $bootfile;"                     \
 531         "tftp $fdtaddr $fdtfile;"                       \
 532         "bootm $loadaddr - $fdtaddr"
 533
 534 #define CONFIG_NFSBOOTCOMMAND                   \
 535         "setenv bootargs root=/dev/nfs rw "     \
 536         "nfsroot=$serverip:$rootpath "          \
 537         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 538         "console=$consoledev,$baudrate $othbootargs;"   \
 539         "tftp $loadaddr $bootfile;"             \
 540         "tftp $fdtaddr $fdtfile;"               \
 541         "bootm $loadaddr - $fdtaddr"
 542
 543 #define CONFIG_RAMBOOTCOMMAND                           \
 544         "setenv bootargs root=/dev/ram rw "             \
 545         "console=$consoledev,$baudrate $othbootargs;"   \
 546         "tftp $ramdiskaddr $ramdiskfile;"               \
 547         "tftp $loadaddr $bootfile;"                     \
 548         "tftp $fdtaddr $fdtfile;"                       \
 549         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 550
 551 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 552
 553 #include <asm/fsl_secure_boot.h>
 554
 555 #endif  /* __CONFIG_H */