include/configs/T208xQDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * T2080/T2081 QDS board configuration file
   9  */
  10
  11 #ifndef __T208xQDS_H
  12 #define __T208xQDS_H
  13
  14 #include <linux/stringify.h>
  15
  16 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  17 #if defined(CONFIG_ARCH_T2080)
  18 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  19 #define CONFIG_SRIO1            /* SRIO port 1 */
  20 #define CONFIG_SRIO2            /* SRIO port 2 */
  21 #endif
  22
  23 /* High Level Configuration Options */
  24
  25 #define CONFIG_SYS_NUM_CPC      CONFIG_SYS_NUM_DDR_CTLRS
  26
  27 #ifdef CONFIG_RAMBOOT_PBL
  28 #define RESET_VECTOR_OFFSET             0x27FFC
  29 #define BOOT_PAGE_OFFSET                0x27000
  30
  31 #ifdef CONFIG_MTD_RAW_NAND
  32 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  33 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  34 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  35 #endif
  36
  37 #ifdef CONFIG_SPIFLASH
  38 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  39 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  40 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  41 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  42 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  43 #endif
  44
  45 #ifdef CONFIG_SDCARD
  46 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  47 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  48 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  49 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  50 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  51 #endif
  52
  53 #endif /* CONFIG_RAMBOOT_PBL */
  54
  55 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  56 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  57 /* Set 1M boot space */
  58 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_TEXT_BASE & 0xfff00000)
  59 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  60                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  61 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  62 #endif
  63
  64 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  65 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  66 #endif
  67
  68 /*
  69  * These can be toggled for performance analysis, otherwise use default.
  70  */
  71 #ifdef CONFIG_DDR_ECC
  72 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  73 #endif
  74
  75 /*
  76  * Config the L3 Cache as L3 SRAM
  77  */
  78 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  79 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  80
  81 #define CONFIG_SYS_DCSRBAR      0xf0000000
  82 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
  83
  84 /*
  85  * DDR Setup
  86  */
  87 #define CONFIG_VERY_BIG_RAM
  88 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  89 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  90 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
  91 #define SPD_EEPROM_ADDRESS1     0x51
  92 #define SPD_EEPROM_ADDRESS2     0x52
  93 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
  94 #define CTRL_INTLV_PREFERED     cacheline
  95
  96 /*
  97  * IFC Definitions
  98  */
  99 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 100 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 101 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 102 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 103                                 + 0x8000000) | \
 104                                 CSPR_PORT_SIZE_16 | \
 105                                 CSPR_MSEL_NOR | \
 106                                 CSPR_V)
 107 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 108 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 109                                 CSPR_PORT_SIZE_16 | \
 110                                 CSPR_MSEL_NOR | \
 111                                 CSPR_V)
 112 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 113 /* NOR Flash Timing Params */
 114 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 115
 116 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 117                                 FTIM0_NOR_TEADC(0x5) | \
 118                                 FTIM0_NOR_TEAHC(0x5))
 119 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 120                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 121                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 122 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 123                                 FTIM2_NOR_TCH(0x4) | \
 124                                 FTIM2_NOR_TWPH(0x0E) | \
 125                                 FTIM2_NOR_TWP(0x1c))
 126 #define CONFIG_SYS_NOR_FTIM3    0x0
 127
 128 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 129
 130 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 131                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 132
 133 #define QIXIS_BASE                      0xffdf0000
 134 #define QIXIS_LBMAP_SWITCH              6
 135 #define QIXIS_LBMAP_MASK                0x0f
 136 #define QIXIS_LBMAP_SHIFT               0
 137 #define QIXIS_LBMAP_DFLTBANK            0x00
 138 #define QIXIS_LBMAP_ALTBANK             0x04
 139 #define QIXIS_LBMAP_NAND                0x09
 140 #define QIXIS_LBMAP_SD                  0x00
 141 #define QIXIS_RCW_SRC_NAND              0x104
 142 #define QIXIS_RCW_SRC_SD                0x040
 143 #define QIXIS_RST_CTL_RESET             0x83
 144 #define QIXIS_RST_FORCE_MEM             0x1
 145 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 146 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 147 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 148 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 149
 150 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 151 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 152                                 | CSPR_PORT_SIZE_8 \
 153                                 | CSPR_MSEL_GPCM \
 154                                 | CSPR_V)
 155 #define CONFIG_SYS_AMASK3       IFC_AMASK(64 * 1024)
 156 #define CONFIG_SYS_CSOR3        0x0
 157 /* QIXIS Timing parameters for IFC CS3 */
 158 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 159                                         FTIM0_GPCM_TEADC(0x0e) | \
 160                                         FTIM0_GPCM_TEAHC(0x0e))
 161 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 162                                         FTIM1_GPCM_TRAD(0x3f))
 163 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 164                                         FTIM2_GPCM_TCH(0x8) | \
 165                                         FTIM2_GPCM_TWP(0x1f))
 166 #define CONFIG_SYS_CS3_FTIM3            0x0
 167
 168 /* NAND Flash on IFC */
 169 #define CONFIG_SYS_NAND_BASE            0xff800000
 170 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 171
 172 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 173 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 174                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 175                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 176                                 | CSPR_V)
 177 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 178
 179 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 180                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 181                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 182                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 183                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 184                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 185                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 186
 187 /* ONFI NAND Flash mode0 Timing Params */
 188 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 189                                         FTIM0_NAND_TWP(0x18)    | \
 190                                         FTIM0_NAND_TWCHT(0x07)  | \
 191                                         FTIM0_NAND_TWH(0x0a))
 192 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 193                                         FTIM1_NAND_TWBE(0x39)   | \
 194                                         FTIM1_NAND_TRR(0x0e)    | \
 195                                         FTIM1_NAND_TRP(0x18))
 196 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 197                                         FTIM2_NAND_TREH(0x0a)   | \
 198                                         FTIM2_NAND_TWHRE(0x1e))
 199 #define CONFIG_SYS_NAND_FTIM3           0x0
 200
 201 #define CONFIG_SYS_NAND_DDR_LAW         11
 202 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 203 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 204
 205 #if defined(CONFIG_MTD_RAW_NAND)
 206 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 207 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 208 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 209 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 210 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 211 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 212 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 213 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 214 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 215 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 216 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 217 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 218 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 219 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 220 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 221 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 222 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 223 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 224 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 225 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 226 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 227 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 228 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 229 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 230 #else
 231 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 232 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 233 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 234 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 235 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 236 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 237 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 238 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 239 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 240 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 241 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 242 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 243 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 244 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 245 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 246 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 247 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 248 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 249 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 250 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 251 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 252 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 253 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 254 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 255 #endif
 256
 257 #define CONFIG_HWCONFIG
 258
 259 /* define to use L1 as initial stack */
 260 #define CONFIG_L1_INIT_RAM
 261 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 262 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 263 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 264 /* The assembler doesn't like typecast */
 265 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 266                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 267                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 268 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 269 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 270 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 271
 272 /*
 273  * Serial Port
 274  */
 275 #define CONFIG_SYS_NS16550_SERIAL
 276 #define CONFIG_SYS_NS16550_REG_SIZE     1
 277 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 278 #define CONFIG_SYS_BAUDRATE_TABLE       \
 279         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 280 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 281 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 282 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 283 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 284
 285 /*
 286  * I2C
 287  */
 288
 289 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 290 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 291 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 292 #define I2C_MUX_CH_DEFAULT      0x8
 293
 294 #define I2C_MUX_CH_VOL_MONITOR 0xa
 295
 296 /* Voltage monitor on channel 2*/
 297 #define I2C_VOL_MONITOR_ADDR           0x40
 298 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 299 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 300 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 301
 302 /* The lowest and highest voltage allowed for T208xQDS */
 303 #define VDD_MV_MIN                      819
 304 #define VDD_MV_MAX                      1212
 305
 306 /*
 307  * RapidIO
 308  */
 309 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 310 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 311 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 312 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 313 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 314 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 315 /*
 316  * for slave u-boot IMAGE instored in master memory space,
 317  * PHYS must be aligned based on the SIZE
 318  */
 319 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 320 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 321 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 322 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 323 /*
 324  * for slave UCODE and ENV instored in master memory space,
 325  * PHYS must be aligned based on the SIZE
 326  */
 327 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 328 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 329 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 330
 331 /* slave core release by master*/
 332 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 333 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 334
 335 /*
 336  * SRIO_PCIE_BOOT - SLAVE
 337  */
 338 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 339 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 340 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 341                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 342 #endif
 343
 344 /*
 345  * eSPI - Enhanced SPI
 346  */
 347
 348 /*
 349  * General PCI
 350  * Memory space is mapped 1-1, but I/O space must start from 0.
 351  */
 352 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 353 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 354 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 355 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 356 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 357
 358 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 359 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 360 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 361 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 362 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 363
 364 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 365 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 366 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 367 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 368 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 369
 370 /* controller 4, Base address 203000 */
 371 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 372 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 373 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 374
 375 /* Qman/Bman */
 376 #ifndef CONFIG_NOBQFMAN
 377 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 378 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 379 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 380 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 381 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 382 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 383 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 384 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 385 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 386                                         CONFIG_SYS_BMAN_CENA_SIZE)
 387 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 388 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 389 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 390 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 391 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 392 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 393 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 394 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 395 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 396 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 397 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 398                                         CONFIG_SYS_QMAN_CENA_SIZE)
 399 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 400 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 401
 402 #define CONFIG_SYS_DPAA_FMAN
 403 #define CONFIG_SYS_DPAA_PME
 404 #define CONFIG_SYS_PMAN
 405 #define CONFIG_SYS_DPAA_DCE
 406 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 407 #endif /* CONFIG_NOBQFMAN */
 408
 409 #ifdef CONFIG_SYS_DPAA_FMAN
 410 #define RGMII_PHY1_ADDR 0x1
 411 #define RGMII_PHY2_ADDR 0x2
 412 #define FM1_10GEC1_PHY_ADDR       0x3
 413 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 414 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 415 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 416 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 417 #endif
 418
 419 /*
 420  * USB
 421  */
 422
 423 /*
 424  * SDHC
 425  */
 426 #ifdef CONFIG_MMC
 427 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 428 #endif
 429
 430 /*
 431  * Dynamic MTD Partition support with mtdparts
 432  */
 433
 434 /*
 435  * Environment
 436  */
 437 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 438 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 439
 440 /*
 441  * Miscellaneous configurable options
 442  */
 443
 444 /*
 445  * For booting Linux, the board info and command line data
 446  * have to be in the first 64 MB of memory, since this is
 447  * the maximum mapped by the Linux kernel during initialization.
 448  */
 449 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 450
 451 /*
 452  * Environment Configuration
 453  */
 454 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 455 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 456
 457 #define __USB_PHY_TYPE          utmi
 458
 459 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 460         "hwconfig=fsl_ddr:"                                     \
 461         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 462         "bank_intlv=auto;"                                      \
 463         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 464         "netdev=eth0\0"                                         \
 465         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 466         "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
 467         "tftpflash=tftpboot $loadaddr $uboot && "               \
 468         "protect off $ubootaddr +$filesize && "                 \
 469         "erase $ubootaddr +$filesize && "                       \
 470         "cp.b $loadaddr $ubootaddr $filesize && "               \
 471         "protect on $ubootaddr +$filesize && "                  \
 472         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 473         "consoledev=ttyS0\0"                                    \
 474         "ramdiskaddr=2000000\0"                                 \
 475         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 476         "fdtaddr=1e00000\0"                                     \
 477         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 478         "bdev=sda3\0"
 479
 480 /*
 481  * For emulation this causes u-boot to jump to the start of the
 482  * proof point app code automatically
 483  */
 484 #define PROOF_POINTS                            \
 485         "setenv bootargs root=/dev/$bdev rw "           \
 486         "console=$consoledev,$baudrate $othbootargs;"   \
 487         "cpu 1 release 0x29000000 - - -;"               \
 488         "cpu 2 release 0x29000000 - - -;"               \
 489         "cpu 3 release 0x29000000 - - -;"               \
 490         "cpu 4 release 0x29000000 - - -;"               \
 491         "cpu 5 release 0x29000000 - - -;"               \
 492         "cpu 6 release 0x29000000 - - -;"               \
 493         "cpu 7 release 0x29000000 - - -;"               \
 494         "go 0x29000000"
 495
 496 #define HVBOOT                          \
 497         "setenv bootargs config-addr=0x60000000; "      \
 498         "bootm 0x01000000 - 0x00f00000"
 499
 500 #define ALU                             \
 501         "setenv bootargs root=/dev/$bdev rw "           \
 502         "console=$consoledev,$baudrate $othbootargs;"   \
 503         "cpu 1 release 0x01000000 - - -;"               \
 504         "cpu 2 release 0x01000000 - - -;"               \
 505         "cpu 3 release 0x01000000 - - -;"               \
 506         "cpu 4 release 0x01000000 - - -;"               \
 507         "cpu 5 release 0x01000000 - - -;"               \
 508         "cpu 6 release 0x01000000 - - -;"               \
 509         "cpu 7 release 0x01000000 - - -;"               \
 510         "go 0x01000000"
 511
 512 #include <asm/fsl_secure_boot.h>
 513
 514 #endif  /* __T208xQDS_H */