include/configs/T208xQDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * T2080/T2081 QDS board configuration file
   8  */
   9
  10 #ifndef __T208xQDS_H
  11 #define __T208xQDS_H
  12
  13 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  14 #if defined(CONFIG_ARCH_T2080)
  15 #define CONFIG_FSL_SATA_V2
  16 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  17 #define CONFIG_SRIO1            /* SRIO port 1 */
  18 #define CONFIG_SRIO2            /* SRIO port 2 */
  19 #elif defined(CONFIG_ARCH_T2081)
  20 #endif
  21
  22 /* High Level Configuration Options */
  23 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  24 #define CONFIG_ENABLE_36BIT_PHYS
  25
  26 #ifdef CONFIG_PHYS_64BIT
  27 #define CONFIG_ADDR_MAP 1
  28 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  29 #endif
  30
  31 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  32 #define CONFIG_SYS_NUM_CPC      CONFIG_SYS_NUM_DDR_CTLRS
  33 #define CONFIG_ENV_OVERWRITE
  34
  35 #ifdef CONFIG_RAMBOOT_PBL
  36 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
  37
  38 #define CONFIG_SPL_FLUSH_IMAGE
  39 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  40 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  41 #define CONFIG_SPL_PAD_TO               0x40000
  42 #define CONFIG_SPL_MAX_SIZE             0x28000
  43 #define RESET_VECTOR_OFFSET             0x27FFC
  44 #define BOOT_PAGE_OFFSET                0x27000
  45 #ifdef CONFIG_SPL_BUILD
  46 #define CONFIG_SPL_SKIP_RELOCATE
  47 #define CONFIG_SPL_COMMON_INIT_DDR
  48 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  49 #endif
  50
  51 #ifdef CONFIG_NAND
  52 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  53 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  54 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  55 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  56 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  57 #if defined(CONFIG_ARCH_T2080)
  58 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
  59 #elif defined(CONFIG_ARCH_T2081)
  60 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg
  61 #endif
  62 #define CONFIG_SPL_NAND_BOOT
  63 #endif
  64
  65 #ifdef CONFIG_SPIFLASH
  66 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  67 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  68 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  71 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  72 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  73 #ifndef CONFIG_SPL_BUILD
  74 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  75 #endif
  76 #if defined(CONFIG_ARCH_T2080)
  77 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
  78 #elif defined(CONFIG_ARCH_T2081)
  79 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg
  80 #endif
  81 #define CONFIG_SPL_SPI_BOOT
  82 #endif
  83
  84 #ifdef CONFIG_SDCARD
  85 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  86 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  87 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
  88 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
  89 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  90 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  91 #ifndef CONFIG_SPL_BUILD
  92 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  93 #endif
  94 #if defined(CONFIG_ARCH_T2080)
  95 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
  96 #elif defined(CONFIG_ARCH_T2081)
  97 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg
  98 #endif
  99 #define CONFIG_SPL_MMC_BOOT
 100 #endif
 101
 102 #endif /* CONFIG_RAMBOOT_PBL */
 103
 104 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 105 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 106 /* Set 1M boot space */
 107 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 108 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 109                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 110 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 111 #endif
 112
 113 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 114 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 115 #endif
 116
 117 /*
 118  * These can be toggled for performance analysis, otherwise use default.
 119  */
 120 #define CONFIG_SYS_CACHE_STASHING
 121 #define CONFIG_BTB              /* toggle branch predition */
 122 #define CONFIG_DDR_ECC
 123 #ifdef CONFIG_DDR_ECC
 124 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 125 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 126 #endif
 127
 128 #ifdef CONFIG_MTD_NOR_FLASH
 129 #define CONFIG_FLASH_CFI_DRIVER
 130 #define CONFIG_SYS_FLASH_CFI
 131 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 132 #endif
 133
 134 #if defined(CONFIG_SPIFLASH)
 135 #define CONFIG_SYS_EXTRA_ENV_RELOC
 136 #define CONFIG_ENV_SPI_BUS      0
 137 #define CONFIG_ENV_SPI_CS       0
 138 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 139 #define CONFIG_ENV_SPI_MODE     0
 140 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 141 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 142 #define CONFIG_ENV_SECT_SIZE    0x10000
 143 #elif defined(CONFIG_SDCARD)
 144 #define CONFIG_SYS_EXTRA_ENV_RELOC
 145 #define CONFIG_SYS_MMC_ENV_DEV  0
 146 #define CONFIG_ENV_SIZE         0x2000
 147 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 148 #elif defined(CONFIG_NAND)
 149 #define CONFIG_SYS_EXTRA_ENV_RELOC
 150 #define CONFIG_ENV_SIZE         0x2000
 151 #define CONFIG_ENV_OFFSET       (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 152 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 153 #define CONFIG_ENV_ADDR         0xffe20000
 154 #define CONFIG_ENV_SIZE         0x2000
 155 #elif defined(CONFIG_ENV_IS_NOWHERE)
 156 #define CONFIG_ENV_SIZE         0x2000
 157 #else
 158 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 159 #define CONFIG_ENV_SIZE         0x2000
 160 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 161 #endif
 162
 163 #ifndef __ASSEMBLY__
 164 unsigned long get_board_sys_clk(void);
 165 unsigned long get_board_ddr_clk(void);
 166 #endif
 167
 168 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 169 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 170
 171 /*
 172  * Config the L3 Cache as L3 SRAM
 173  */
 174 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 175 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 176 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 177 #ifdef CONFIG_RAMBOOT_PBL
 178 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 179 #endif
 180 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 181 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 182 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 183 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 184
 185 #define CONFIG_SYS_DCSRBAR      0xf0000000
 186 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 187
 188 /* EEPROM */
 189 #define CONFIG_ID_EEPROM
 190 #define CONFIG_SYS_I2C_EEPROM_NXID
 191 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 192 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 193 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 194
 195 /*
 196  * DDR Setup
 197  */
 198 #define CONFIG_VERY_BIG_RAM
 199 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 200 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 201 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 202 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 203 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 204 #define CONFIG_DDR_SPD
 205 #define CONFIG_FSL_DDR_INTERACTIVE
 206 #define CONFIG_SYS_SPD_BUS_NUM  0
 207 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 208 #define SPD_EEPROM_ADDRESS1     0x51
 209 #define SPD_EEPROM_ADDRESS2     0x52
 210 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 211 #define CTRL_INTLV_PREFERED     cacheline
 212
 213 /*
 214  * IFC Definitions
 215  */
 216 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 217 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 218 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 219 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 220                                 + 0x8000000) | \
 221                                 CSPR_PORT_SIZE_16 | \
 222                                 CSPR_MSEL_NOR | \
 223                                 CSPR_V)
 224 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 225 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 226                                 CSPR_PORT_SIZE_16 | \
 227                                 CSPR_MSEL_NOR | \
 228                                 CSPR_V)
 229 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 230 /* NOR Flash Timing Params */
 231 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 232
 233 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 234                                 FTIM0_NOR_TEADC(0x5) | \
 235                                 FTIM0_NOR_TEAHC(0x5))
 236 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 237                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 238                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 239 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 240                                 FTIM2_NOR_TCH(0x4) | \
 241                                 FTIM2_NOR_TWPH(0x0E) | \
 242                                 FTIM2_NOR_TWP(0x1c))
 243 #define CONFIG_SYS_NOR_FTIM3    0x0
 244
 245 #define CONFIG_SYS_FLASH_QUIET_TEST
 246 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 247
 248 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 249 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 250 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 251 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 252
 253 #define CONFIG_SYS_FLASH_EMPTY_INFO
 254 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 255                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 256
 257 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 258 #define QIXIS_BASE                      0xffdf0000
 259 #define QIXIS_LBMAP_SWITCH              6
 260 #define QIXIS_LBMAP_MASK                0x0f
 261 #define QIXIS_LBMAP_SHIFT               0
 262 #define QIXIS_LBMAP_DFLTBANK            0x00
 263 #define QIXIS_LBMAP_ALTBANK             0x04
 264 #define QIXIS_LBMAP_NAND                0x09
 265 #define QIXIS_LBMAP_SD                  0x00
 266 #define QIXIS_RCW_SRC_NAND              0x104
 267 #define QIXIS_RCW_SRC_SD                0x040
 268 #define QIXIS_RST_CTL_RESET             0x83
 269 #define QIXIS_RST_FORCE_MEM             0x1
 270 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 271 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 272 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 273 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 274
 275 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 276 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 277                                 | CSPR_PORT_SIZE_8 \
 278                                 | CSPR_MSEL_GPCM \
 279                                 | CSPR_V)
 280 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 281 #define CONFIG_SYS_CSOR3        0x0
 282 /* QIXIS Timing parameters for IFC CS3 */
 283 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 284                                         FTIM0_GPCM_TEADC(0x0e) | \
 285                                         FTIM0_GPCM_TEAHC(0x0e))
 286 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 287                                         FTIM1_GPCM_TRAD(0x3f))
 288 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 289                                         FTIM2_GPCM_TCH(0x8) | \
 290                                         FTIM2_GPCM_TWP(0x1f))
 291 #define CONFIG_SYS_CS3_FTIM3            0x0
 292
 293 /* NAND Flash on IFC */
 294 #define CONFIG_NAND_FSL_IFC
 295 #define CONFIG_SYS_NAND_BASE            0xff800000
 296 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 297
 298 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 299 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 300                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 301                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 302                                 | CSPR_V)
 303 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 304
 305 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 306                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 307                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 308                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 309                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 310                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 311                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 312
 313 #define CONFIG_SYS_NAND_ONFI_DETECTION
 314
 315 /* ONFI NAND Flash mode0 Timing Params */
 316 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 317                                         FTIM0_NAND_TWP(0x18)    | \
 318                                         FTIM0_NAND_TWCHT(0x07)  | \
 319                                         FTIM0_NAND_TWH(0x0a))
 320 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 321                                         FTIM1_NAND_TWBE(0x39)   | \
 322                                         FTIM1_NAND_TRR(0x0e)    | \
 323                                         FTIM1_NAND_TRP(0x18))
 324 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 325                                         FTIM2_NAND_TREH(0x0a)   | \
 326                                         FTIM2_NAND_TWHRE(0x1e))
 327 #define CONFIG_SYS_NAND_FTIM3           0x0
 328
 329 #define CONFIG_SYS_NAND_DDR_LAW         11
 330 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 331 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 332 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 333
 334 #if defined(CONFIG_NAND)
 335 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 336 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 337 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 338 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 339 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 340 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 341 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 342 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 343 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 344 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 345 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 346 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 347 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 348 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 349 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 350 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 351 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 352 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 353 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 354 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 355 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 356 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 357 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 358 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 359 #else
 360 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 361 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 362 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 363 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 364 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 365 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 366 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 367 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 368 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 369 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 370 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 371 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 372 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 373 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 374 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 375 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 376 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 377 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 378 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 379 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 380 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 381 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 382 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 383 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 384 #endif
 385
 386 #if defined(CONFIG_RAMBOOT_PBL)
 387 #define CONFIG_SYS_RAMBOOT
 388 #endif
 389
 390 #ifdef CONFIG_SPL_BUILD
 391 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 392 #else
 393 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 394 #endif
 395
 396 #define CONFIG_MISC_INIT_R
 397 #define CONFIG_HWCONFIG
 398
 399 /* define to use L1 as initial stack */
 400 #define CONFIG_L1_INIT_RAM
 401 #define CONFIG_SYS_INIT_RAM_LOCK
 402 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 403 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 404 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 405 /* The assembler doesn't like typecast */
 406 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 407                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 408                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 409 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 410 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 411                                                 GENERATED_GBL_DATA_SIZE)
 412 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 413 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 414 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 415
 416 /*
 417  * Serial Port
 418  */
 419 #define CONFIG_SYS_NS16550_SERIAL
 420 #define CONFIG_SYS_NS16550_REG_SIZE     1
 421 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 422 #define CONFIG_SYS_BAUDRATE_TABLE       \
 423         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 424 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 425 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 426 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 427 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 428
 429 /*
 430  * I2C
 431  */
 432 #define CONFIG_SYS_I2C
 433 #define CONFIG_SYS_I2C_FSL
 434 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 435 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 436 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 437 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 438 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 439 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 440 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 441 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 442 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 443 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 444 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 445 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 446 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 447 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 448 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 449 #define I2C_MUX_CH_DEFAULT      0x8
 450
 451 #define I2C_MUX_CH_VOL_MONITOR 0xa
 452
 453 /* Voltage monitor on channel 2*/
 454 #define I2C_VOL_MONITOR_ADDR           0x40
 455 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 456 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 457 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 458
 459 #define CONFIG_VID_FLS_ENV              "t208xqds_vdd_mv"
 460 #ifndef CONFIG_SPL_BUILD
 461 #define CONFIG_VID
 462 #endif
 463 #define CONFIG_VOL_MONITOR_IR36021_SET
 464 #define CONFIG_VOL_MONITOR_IR36021_READ
 465 /* The lowest and highest voltage allowed for T208xQDS */
 466 #define VDD_MV_MIN                      819
 467 #define VDD_MV_MAX                      1212
 468
 469 /*
 470  * RapidIO
 471  */
 472 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 473 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 474 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 475 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 476 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 477 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 478 /*
 479  * for slave u-boot IMAGE instored in master memory space,
 480  * PHYS must be aligned based on the SIZE
 481  */
 482 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 483 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 484 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 485 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 486 /*
 487  * for slave UCODE and ENV instored in master memory space,
 488  * PHYS must be aligned based on the SIZE
 489  */
 490 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 491 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 492 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 493
 494 /* slave core release by master*/
 495 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 496 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 497
 498 /*
 499  * SRIO_PCIE_BOOT - SLAVE
 500  */
 501 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 502 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 503 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 504                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 505 #endif
 506
 507 /*
 508  * eSPI - Enhanced SPI
 509  */
 510 #ifdef CONFIG_SPI_FLASH
 511
 512 #define CONFIG_SPI_FLASH_BAR
 513 #define CONFIG_SF_DEFAULT_SPEED  10000000
 514 #define CONFIG_SF_DEFAULT_MODE    0
 515 #endif
 516
 517 /*
 518  * General PCI
 519  * Memory space is mapped 1-1, but I/O space must start from 0.
 520  */
 521 #define CONFIG_PCIE1            /* PCIE controller 1 */
 522 #define CONFIG_PCIE2            /* PCIE controller 2 */
 523 #define CONFIG_PCIE3            /* PCIE controller 3 */
 524 #define CONFIG_PCIE4            /* PCIE controller 4 */
 525 #define CONFIG_FSL_PCIE_RESET   /* pcie reset fix link width 2x-4x*/
 526 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 527 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 528 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 529 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 530 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 531 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 532 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 533 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 534 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 535 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 536 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 537
 538 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 539 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 540 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 541 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 542 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 543 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 544 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 545 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 546 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 547
 548 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 549 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 550 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 551 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 552 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 553 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 554 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 555 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 556 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 557
 558 /* controller 4, Base address 203000 */
 559 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 560 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 561 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 562 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 563 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 564 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 565 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 566
 567 #ifdef CONFIG_PCI
 568 #define CONFIG_PCI_INDIRECT_BRIDGE
 569 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 570 #endif
 571
 572 /* Qman/Bman */
 573 #ifndef CONFIG_NOBQFMAN
 574 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 575 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 576 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 577 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 578 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 579 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 580 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 581 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 582 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 583                                         CONFIG_SYS_BMAN_CENA_SIZE)
 584 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 585 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 586 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 587 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 588 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 589 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 590 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 591 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 592 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 593 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 594 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 595                                         CONFIG_SYS_QMAN_CENA_SIZE)
 596 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 597 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 598
 599 #define CONFIG_SYS_DPAA_FMAN
 600 #define CONFIG_SYS_DPAA_PME
 601 #define CONFIG_SYS_PMAN
 602 #define CONFIG_SYS_DPAA_DCE
 603 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 604 #define CONFIG_SYS_INTERLAKEN
 605
 606 /* Default address of microcode for the Linux Fman driver */
 607 #if defined(CONFIG_SPIFLASH)
 608 /*
 609  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 610  * env, so we got 0x110000.
 611  */
 612 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 613 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 614 #elif defined(CONFIG_SDCARD)
 615 /*
 616  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 617  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 618  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 619  */
 620 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 621 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 622 #elif defined(CONFIG_NAND)
 623 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 624 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 625 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 626 /*
 627  * Slave has no ucode locally, it can fetch this from remote. When implementing
 628  * in two corenet boards, slave's ucode could be stored in master's memory
 629  * space, the address can be mapped from slave TLB->slave LAW->
 630  * slave SRIO or PCIE outbound window->master inbound window->
 631  * master LAW->the ucode address in master's memory space.
 632  */
 633 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 634 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 635 #else
 636 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 637 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 638 #endif
 639 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 640 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 641 #endif /* CONFIG_NOBQFMAN */
 642
 643 #ifdef CONFIG_SYS_DPAA_FMAN
 644 #define CONFIG_FMAN_ENET
 645 #define CONFIG_PHYLIB_10G
 646 #define CONFIG_PHY_VITESSE
 647 #define CONFIG_PHY_REALTEK
 648 #define CONFIG_PHY_TERANETICS
 649 #define RGMII_PHY1_ADDR 0x1
 650 #define RGMII_PHY2_ADDR 0x2
 651 #define FM1_10GEC1_PHY_ADDR       0x3
 652 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 653 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 654 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 655 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 656 #endif
 657
 658 #ifdef CONFIG_FMAN_ENET
 659 #define CONFIG_MII              /* MII PHY management */
 660 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 661 #endif
 662
 663 /*
 664  * SATA
 665  */
 666 #ifdef CONFIG_FSL_SATA_V2
 667 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 668 #define CONFIG_SATA1
 669 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 670 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 671 #define CONFIG_SATA2
 672 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 673 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 674 #define CONFIG_LBA48
 675 #endif
 676
 677 /*
 678  * USB
 679  */
 680 #ifdef CONFIG_USB_EHCI_HCD
 681 #define CONFIG_USB_EHCI_FSL
 682 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 683 #define CONFIG_HAS_FSL_DR_USB
 684 #endif
 685
 686 /*
 687  * SDHC
 688  */
 689 #ifdef CONFIG_MMC
 690 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 691 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 692 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 693 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 694 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 695 #endif
 696
 697 /*
 698  * Dynamic MTD Partition support with mtdparts
 699  */
 700 #ifdef CONFIG_MTD_NOR_FLASH
 701 #define CONFIG_MTD_DEVICE
 702 #define CONFIG_MTD_PARTITIONS
 703 #define CONFIG_FLASH_CFI_MTD
 704 #endif
 705
 706 /*
 707  * Environment
 708  */
 709 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 710 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 711
 712 /*
 713  * Miscellaneous configurable options
 714  */
 715 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 716
 717 /*
 718  * For booting Linux, the board info and command line data
 719  * have to be in the first 64 MB of memory, since this is
 720  * the maximum mapped by the Linux kernel during initialization.
 721  */
 722 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 723 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 724
 725 #ifdef CONFIG_CMD_KGDB
 726 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 727 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 728 #endif
 729
 730 /*
 731  * Environment Configuration
 732  */
 733 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 734 #define CONFIG_BOOTFILE  "uImage"
 735 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 736
 737 /* default location for tftp and bootm */
 738 #define CONFIG_LOADADDR         1000000
 739 #define __USB_PHY_TYPE          utmi
 740
 741 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 742         "hwconfig=fsl_ddr:"                                     \
 743         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 744         "bank_intlv=auto;"                                      \
 745         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 746         "netdev=eth0\0"                                         \
 747         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 748         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 749         "tftpflash=tftpboot $loadaddr $uboot && "               \
 750         "protect off $ubootaddr +$filesize && "                 \
 751         "erase $ubootaddr +$filesize && "                       \
 752         "cp.b $loadaddr $ubootaddr $filesize && "               \
 753         "protect on $ubootaddr +$filesize && "                  \
 754         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 755         "consoledev=ttyS0\0"                                    \
 756         "ramdiskaddr=2000000\0"                                 \
 757         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 758         "fdtaddr=1e00000\0"                                     \
 759         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 760         "bdev=sda3\0"
 761
 762 /*
 763  * For emulation this causes u-boot to jump to the start of the
 764  * proof point app code automatically
 765  */
 766 #define CONFIG_PROOF_POINTS                             \
 767         "setenv bootargs root=/dev/$bdev rw "           \
 768         "console=$consoledev,$baudrate $othbootargs;"   \
 769         "cpu 1 release 0x29000000 - - -;"               \
 770         "cpu 2 release 0x29000000 - - -;"               \
 771         "cpu 3 release 0x29000000 - - -;"               \
 772         "cpu 4 release 0x29000000 - - -;"               \
 773         "cpu 5 release 0x29000000 - - -;"               \
 774         "cpu 6 release 0x29000000 - - -;"               \
 775         "cpu 7 release 0x29000000 - - -;"               \
 776         "go 0x29000000"
 777
 778 #define CONFIG_HVBOOT                           \
 779         "setenv bootargs config-addr=0x60000000; "      \
 780         "bootm 0x01000000 - 0x00f00000"
 781
 782 #define CONFIG_ALU                              \
 783         "setenv bootargs root=/dev/$bdev rw "           \
 784         "console=$consoledev,$baudrate $othbootargs;"   \
 785         "cpu 1 release 0x01000000 - - -;"               \
 786         "cpu 2 release 0x01000000 - - -;"               \
 787         "cpu 3 release 0x01000000 - - -;"               \
 788         "cpu 4 release 0x01000000 - - -;"               \
 789         "cpu 5 release 0x01000000 - - -;"               \
 790         "cpu 6 release 0x01000000 - - -;"               \
 791         "cpu 7 release 0x01000000 - - -;"               \
 792         "go 0x01000000"
 793
 794 #define CONFIG_LINUX                            \
 795         "setenv bootargs root=/dev/ram rw "             \
 796         "console=$consoledev,$baudrate $othbootargs;"   \
 797         "setenv ramdiskaddr 0x02000000;"                \
 798         "setenv fdtaddr 0x00c00000;"                    \
 799         "setenv loadaddr 0x1000000;"                    \
 800         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 801
 802 #define CONFIG_HDBOOT                                   \
 803         "setenv bootargs root=/dev/$bdev rw "           \
 804         "console=$consoledev,$baudrate $othbootargs;"   \
 805         "tftp $loadaddr $bootfile;"                     \
 806         "tftp $fdtaddr $fdtfile;"                       \
 807         "bootm $loadaddr - $fdtaddr"
 808
 809 #define CONFIG_NFSBOOTCOMMAND                   \
 810         "setenv bootargs root=/dev/nfs rw "     \
 811         "nfsroot=$serverip:$rootpath "          \
 812         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 813         "console=$consoledev,$baudrate $othbootargs;"   \
 814         "tftp $loadaddr $bootfile;"             \
 815         "tftp $fdtaddr $fdtfile;"               \
 816         "bootm $loadaddr - $fdtaddr"
 817
 818 #define CONFIG_RAMBOOTCOMMAND                           \
 819         "setenv bootargs root=/dev/ram rw "             \
 820         "console=$consoledev,$baudrate $othbootargs;"   \
 821         "tftp $ramdiskaddr $ramdiskfile;"               \
 822         "tftp $loadaddr $bootfile;"                     \
 823         "tftp $fdtaddr $fdtfile;"                       \
 824         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 825
 826 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 827
 828 #include <asm/fsl_secure_boot.h>
 829
 830 #endif  /* __T208xQDS_H */