include/configs/T208xQDS.h

   1 /*
   2  * Copyright 2011-2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T2080/T2081 QDS board configuration file
   9  */
  10
  11 #ifndef __T208xQDS_H
  12 #define __T208xQDS_H
  13
  14 #define CONFIG_DISPLAY_BOARDINFO
  15 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
  16 #define CONFIG_MMC
  17 #define CONFIG_USB_EHCI
  18 #if defined(CONFIG_PPC_T2080)
  19 #define CONFIG_T2080QDS
  20 #define CONFIG_FSL_SATA_V2
  21 #define CONFIG_SYS_SRIO         /* Enable Serial RapidIO Support */
  22 #define CONFIG_SRIO1            /* SRIO port 1 */
  23 #define CONFIG_SRIO2            /* SRIO port 2 */
  24 #elif defined(CONFIG_PPC_T2081)
  25 #define CONFIG_T2081QDS
  26 #endif
  27
  28 /* High Level Configuration Options */
  29 #define CONFIG_BOOKE
  30 #define CONFIG_E500             /* BOOKE e500 family */
  31 #define CONFIG_E500MC           /* BOOKE e500mc family */
  32 #define CONFIG_SYS_BOOK3E_HV    /* Category E.HV supported */
  33 #define CONFIG_MP               /* support multiple processors */
  34 #define CONFIG_ENABLE_36BIT_PHYS
  35
  36 #ifdef CONFIG_PHYS_64BIT
  37 #define CONFIG_ADDR_MAP 1
  38 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
  39 #endif
  40
  41 #define CONFIG_SYS_FSL_CPC      /* Corenet Platform Cache */
  42 #define CONFIG_SYS_NUM_CPC      CONFIG_NUM_DDR_CONTROLLERS
  43 #define CONFIG_FSL_IFC          /* Enable IFC Support */
  44 #define CONFIG_FSL_CAAM         /* Enable SEC/CAAM */
  45 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  46 #define CONFIG_ENV_OVERWRITE
  47
  48 #ifdef CONFIG_RAMBOOT_PBL
  49 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
  50 #if defined(CONFIG_PPC_T2080)
  51 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_rcw.cfg
  52 #elif defined(CONFIG_PPC_T2081)
  53 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg
  54 #endif
  55
  56 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  57 #define CONFIG_SPL_SERIAL_SUPPORT
  58 #define CONFIG_SPL_FLUSH_IMAGE
  59 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  60 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  61 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  62 #define CONFIG_SYS_TEXT_BASE            0x00201000
  63 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  64 #define CONFIG_SPL_PAD_TO               0x40000
  65 #define CONFIG_SPL_MAX_SIZE             0x28000
  66 #define RESET_VECTOR_OFFSET             0x27FFC
  67 #define BOOT_PAGE_OFFSET                0x27000
  68 #ifdef CONFIG_SPL_BUILD
  69 #define CONFIG_SPL_SKIP_RELOCATE
  70 #define CONFIG_SPL_COMMON_INIT_DDR
  71 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  72 #define CONFIG_SYS_NO_FLASH
  73 #endif
  74
  75 #ifdef CONFIG_NAND
  76 #define CONFIG_SPL_NAND_SUPPORT
  77 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  78 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  79 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  80 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  81 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  82 #define CONFIG_SPL_NAND_BOOT
  83 #endif
  84
  85 #ifdef CONFIG_SPIFLASH
  86 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
  87 #define CONFIG_SPL_SPI_SUPPORT
  88 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  89 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  90 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  91 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x00200000)
  92 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x00200000)
  93 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  94 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  95 #ifndef CONFIG_SPL_BUILD
  96 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  97 #endif
  98 #define CONFIG_SPL_SPI_BOOT
  99 #endif
 100
 101 #ifdef CONFIG_SDCARD
 102 #define CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
 103 #define CONFIG_SPL_MMC_SUPPORT
 104 #define CONFIG_SPL_MMC_MINIMAL
 105 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 106 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x00200000)
 107 #define CONFIG_SYS_MMC_U_BOOT_START     (0x00200000)
 108 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 109 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 110 #ifndef CONFIG_SPL_BUILD
 111 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 112 #endif
 113 #define CONFIG_SPL_MMC_BOOT
 114 #endif
 115
 116 #endif /* CONFIG_RAMBOOT_PBL */
 117
 118 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 119 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 120 /* Set 1M boot space */
 121 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 122 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
 123                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 124 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 125 #define CONFIG_SYS_NO_FLASH
 126 #endif
 127
 128 #ifndef CONFIG_SYS_TEXT_BASE
 129 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 130 #endif
 131
 132 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 133 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 134 #endif
 135
 136 /*
 137  * These can be toggled for performance analysis, otherwise use default.
 138  */
 139 #define CONFIG_SYS_CACHE_STASHING
 140 #define CONFIG_BTB              /* toggle branch predition */
 141 #define CONFIG_DDR_ECC
 142 #ifdef CONFIG_DDR_ECC
 143 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 144 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 145 #endif
 146
 147 #ifndef CONFIG_SYS_NO_FLASH
 148 #define CONFIG_FLASH_CFI_DRIVER
 149 #define CONFIG_SYS_FLASH_CFI
 150 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 151 #endif
 152
 153 #if defined(CONFIG_SPIFLASH)
 154 #define CONFIG_SYS_EXTRA_ENV_RELOC
 155 #define CONFIG_ENV_IS_IN_SPI_FLASH
 156 #define CONFIG_ENV_SPI_BUS      0
 157 #define CONFIG_ENV_SPI_CS       0
 158 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 159 #define CONFIG_ENV_SPI_MODE     0
 160 #define CONFIG_ENV_SIZE         0x2000     /* 8KB */
 161 #define CONFIG_ENV_OFFSET       0x100000   /* 1MB */
 162 #define CONFIG_ENV_SECT_SIZE    0x10000
 163 #elif defined(CONFIG_SDCARD)
 164 #define CONFIG_SYS_EXTRA_ENV_RELOC
 165 #define CONFIG_ENV_IS_IN_MMC
 166 #define CONFIG_SYS_MMC_ENV_DEV  0
 167 #define CONFIG_ENV_SIZE         0x2000
 168 #define CONFIG_ENV_OFFSET       (512 * 0x800)
 169 #elif defined(CONFIG_NAND)
 170 #define CONFIG_SYS_EXTRA_ENV_RELOC
 171 #define CONFIG_ENV_IS_IN_NAND
 172 #define CONFIG_ENV_SIZE         0x2000
 173 #define CONFIG_ENV_OFFSET       (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 174 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 175 #define CONFIG_ENV_IS_IN_REMOTE
 176 #define CONFIG_ENV_ADDR         0xffe20000
 177 #define CONFIG_ENV_SIZE         0x2000
 178 #elif defined(CONFIG_ENV_IS_NOWHERE)
 179 #define CONFIG_ENV_SIZE         0x2000
 180 #else
 181 #define CONFIG_ENV_IS_IN_FLASH
 182 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 183 #define CONFIG_ENV_SIZE         0x2000
 184 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 185 #endif
 186
 187 #ifndef __ASSEMBLY__
 188 unsigned long get_board_sys_clk(void);
 189 unsigned long get_board_ddr_clk(void);
 190 #endif
 191
 192 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 193 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 194
 195 /*
 196  * Config the L3 Cache as L3 SRAM
 197  */
 198 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 199 #define CONFIG_SYS_L3_SIZE              (512 << 10)
 200 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 201 #ifdef CONFIG_RAMBOOT_PBL
 202 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 203 #endif
 204 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 205 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (50 << 10)
 206 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 207 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 208
 209 #define CONFIG_SYS_DCSRBAR      0xf0000000
 210 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
 211
 212 /* EEPROM */
 213 #define CONFIG_ID_EEPROM
 214 #define CONFIG_SYS_I2C_EEPROM_NXID
 215 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 216 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 217 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 218
 219 /*
 220  * DDR Setup
 221  */
 222 #define CONFIG_VERY_BIG_RAM
 223 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 224 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 225 #define CONFIG_DIMM_SLOTS_PER_CTLR      2
 226 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 227 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 228 #define CONFIG_DDR_SPD
 229 #define CONFIG_SYS_FSL_DDR3
 230 #define CONFIG_FSL_DDR_INTERACTIVE
 231 #define CONFIG_SYS_SPD_BUS_NUM  0
 232 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 233 #define SPD_EEPROM_ADDRESS1     0x51
 234 #define SPD_EEPROM_ADDRESS2     0x52
 235 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 236 #define CTRL_INTLV_PREFERED     cacheline
 237
 238 /*
 239  * IFC Definitions
 240  */
 241 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 242 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 243 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 244 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 245                                 + 0x8000000) | \
 246                                 CSPR_PORT_SIZE_16 | \
 247                                 CSPR_MSEL_NOR | \
 248                                 CSPR_V)
 249 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 250 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 251                                 CSPR_PORT_SIZE_16 | \
 252                                 CSPR_MSEL_NOR | \
 253                                 CSPR_V)
 254 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 255 /* NOR Flash Timing Params */
 256 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 257
 258 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 259                                 FTIM0_NOR_TEADC(0x5) | \
 260                                 FTIM0_NOR_TEAHC(0x5))
 261 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 262                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 263                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 264 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 265                                 FTIM2_NOR_TCH(0x4) | \
 266                                 FTIM2_NOR_TWPH(0x0E) | \
 267                                 FTIM2_NOR_TWP(0x1c))
 268 #define CONFIG_SYS_NOR_FTIM3    0x0
 269
 270 #define CONFIG_SYS_FLASH_QUIET_TEST
 271 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 272
 273 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 274 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 275 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 276 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 277
 278 #define CONFIG_SYS_FLASH_EMPTY_INFO
 279 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 280                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 281
 282 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 283 #define QIXIS_BASE                      0xffdf0000
 284 #define QIXIS_LBMAP_SWITCH              6
 285 #define QIXIS_LBMAP_MASK                0x0f
 286 #define QIXIS_LBMAP_SHIFT               0
 287 #define QIXIS_LBMAP_DFLTBANK            0x00
 288 #define QIXIS_LBMAP_ALTBANK             0x04
 289 #define QIXIS_LBMAP_NAND                0x09
 290 #define QIXIS_LBMAP_SD                  0x00
 291 #define QIXIS_RCW_SRC_NAND              0x104
 292 #define QIXIS_RCW_SRC_SD                0x040
 293 #define QIXIS_RST_CTL_RESET             0x83
 294 #define QIXIS_RST_FORCE_MEM             0x1
 295 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 296 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 297 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 298 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 299
 300 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 301 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 302                                 | CSPR_PORT_SIZE_8 \
 303                                 | CSPR_MSEL_GPCM \
 304                                 | CSPR_V)
 305 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 306 #define CONFIG_SYS_CSOR3        0x0
 307 /* QIXIS Timing parameters for IFC CS3 */
 308 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 309                                         FTIM0_GPCM_TEADC(0x0e) | \
 310                                         FTIM0_GPCM_TEAHC(0x0e))
 311 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 312                                         FTIM1_GPCM_TRAD(0x3f))
 313 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 314                                         FTIM2_GPCM_TCH(0x8) | \
 315                                         FTIM2_GPCM_TWP(0x1f))
 316 #define CONFIG_SYS_CS3_FTIM3            0x0
 317
 318 /* NAND Flash on IFC */
 319 #define CONFIG_NAND_FSL_IFC
 320 #define CONFIG_SYS_NAND_BASE            0xff800000
 321 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 322
 323 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 324 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 325                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 326                                 | CSPR_MSEL_NAND         /* MSEL = NAND */ \
 327                                 | CSPR_V)
 328 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 329
 330 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 331                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 332                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */     \
 333                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */   \
 334                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */\
 335                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */\
 336                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 337
 338 #define CONFIG_SYS_NAND_ONFI_DETECTION
 339
 340 /* ONFI NAND Flash mode0 Timing Params */
 341 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 342                                         FTIM0_NAND_TWP(0x18)    | \
 343                                         FTIM0_NAND_TWCHT(0x07)  | \
 344                                         FTIM0_NAND_TWH(0x0a))
 345 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 346                                         FTIM1_NAND_TWBE(0x39)   | \
 347                                         FTIM1_NAND_TRR(0x0e)    | \
 348                                         FTIM1_NAND_TRP(0x18))
 349 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f)  | \
 350                                         FTIM2_NAND_TREH(0x0a)   | \
 351                                         FTIM2_NAND_TWHRE(0x1e))
 352 #define CONFIG_SYS_NAND_FTIM3           0x0
 353
 354 #define CONFIG_SYS_NAND_DDR_LAW         11
 355 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 356 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 357 #define CONFIG_CMD_NAND
 358 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 359
 360 #if defined(CONFIG_NAND)
 361 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 362 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 363 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 364 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 365 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 366 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 367 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 368 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 369 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 370 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 371 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 372 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 373 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 374 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 375 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 376 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 377 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 378 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 379 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 380 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 381 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 382 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 383 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 384 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 385 #else
 386 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 387 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 388 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 389 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 390 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 391 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 392 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 393 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 394 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 395 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 396 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 397 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 398 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 399 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 400 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 401 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 402 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 403 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 404 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 405 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 406 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 407 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 408 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 409 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 410 #endif
 411
 412 #if defined(CONFIG_RAMBOOT_PBL)
 413 #define CONFIG_SYS_RAMBOOT
 414 #endif
 415
 416 #ifdef CONFIG_SPL_BUILD
 417 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 418 #else
 419 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 420 #endif
 421
 422 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 423 #define CONFIG_MISC_INIT_R
 424 #define CONFIG_HWCONFIG
 425
 426 /* define to use L1 as initial stack */
 427 #define CONFIG_L1_INIT_RAM
 428 #define CONFIG_SYS_INIT_RAM_LOCK
 429 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000 /* Initial L1 address */
 430 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 431 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 432 /* The assembler doesn't like typecast */
 433 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 434                         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 435                         CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 436 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 437 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 438                                                 GENERATED_GBL_DATA_SIZE)
 439 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 440 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 441 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 442
 443 /*
 444  * Serial Port
 445  */
 446 #define CONFIG_CONS_INDEX               1
 447 #define CONFIG_SYS_NS16550_SERIAL
 448 #define CONFIG_SYS_NS16550_REG_SIZE     1
 449 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 450 #define CONFIG_SYS_BAUDRATE_TABLE       \
 451         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 452 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 453 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 454 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 455 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 456
 457 /*
 458  * I2C
 459  */
 460 #define CONFIG_SYS_I2C
 461 #define CONFIG_SYS_I2C_FSL
 462 #define CONFIG_SYS_FSL_I2C_SLAVE   0x7F
 463 #define CONFIG_SYS_FSL_I2C2_SLAVE  0x7F
 464 #define CONFIG_SYS_FSL_I2C3_SLAVE  0x7F
 465 #define CONFIG_SYS_FSL_I2C4_SLAVE  0x7F
 466 #define CONFIG_SYS_FSL_I2C_OFFSET  0x118000
 467 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
 468 #define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
 469 #define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
 470 #define CONFIG_SYS_FSL_I2C_SPEED   100000
 471 #define CONFIG_SYS_FSL_I2C2_SPEED  100000
 472 #define CONFIG_SYS_FSL_I2C3_SPEED  100000
 473 #define CONFIG_SYS_FSL_I2C4_SPEED  100000
 474 #define I2C_MUX_PCA_ADDR_PRI    0x77 /* I2C bus multiplexer,primary */
 475 #define I2C_MUX_PCA_ADDR_SEC1   0x75 /* I2C bus multiplexer,secondary 1 */
 476 #define I2C_MUX_PCA_ADDR_SEC2   0x76 /* I2C bus multiplexer,secondary 2 */
 477 #define I2C_MUX_CH_DEFAULT      0x8
 478
 479 #define I2C_MUX_CH_VOL_MONITOR 0xa
 480
 481 /* Voltage monitor on channel 2*/
 482 #define I2C_VOL_MONITOR_ADDR           0x40
 483 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 484 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 485 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 486
 487 #define CONFIG_VID_FLS_ENV              "t208xqds_vdd_mv"
 488 #ifndef CONFIG_SPL_BUILD
 489 #define CONFIG_VID
 490 #endif
 491 #define CONFIG_VOL_MONITOR_IR36021_SET
 492 #define CONFIG_VOL_MONITOR_IR36021_READ
 493 /* The lowest and highest voltage allowed for T208xQDS */
 494 #define VDD_MV_MIN                      819
 495 #define VDD_MV_MAX                      1212
 496
 497 /*
 498  * RapidIO
 499  */
 500 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 501 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 502 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000 /* 256M */
 503 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 504 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 505 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000 /* 256M */
 506 /*
 507  * for slave u-boot IMAGE instored in master memory space,
 508  * PHYS must be aligned based on the SIZE
 509  */
 510 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 511 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 512 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 513 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 514 /*
 515  * for slave UCODE and ENV instored in master memory space,
 516  * PHYS must be aligned based on the SIZE
 517  */
 518 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 519 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 520 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 521
 522 /* slave core release by master*/
 523 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 524 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 525
 526 /*
 527  * SRIO_PCIE_BOOT - SLAVE
 528  */
 529 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 530 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 531 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 532                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 533 #endif
 534
 535 /*
 536  * eSPI - Enhanced SPI
 537  */
 538 #ifdef CONFIG_SPI_FLASH
 539 #ifndef CONFIG_SPL_BUILD
 540 #endif
 541
 542 #define CONFIG_SPI_FLASH_BAR
 543 #define CONFIG_SF_DEFAULT_SPEED  10000000
 544 #define CONFIG_SF_DEFAULT_MODE    0
 545 #endif
 546
 547 /*
 548  * General PCI
 549  * Memory space is mapped 1-1, but I/O space must start from 0.
 550  */
 551 #define CONFIG_PCI              /* Enable PCI/PCIE */
 552 #define CONFIG_PCIE1            /* PCIE controller 1 */
 553 #define CONFIG_PCIE2            /* PCIE controller 2 */
 554 #define CONFIG_PCIE3            /* PCIE controller 3 */
 555 #define CONFIG_PCIE4            /* PCIE controller 4 */
 556 #define CONFIG_FSL_PCIE_RESET
 557 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 558 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 559 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 560 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 561 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 562 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 563 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 564 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 565 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 566 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 567 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 568
 569 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 570 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 571 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 572 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 573 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000 /* 256M */
 574 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 575 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 576 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 577 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 578
 579 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 580 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xb0000000
 581 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 582 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc30000000ull
 583 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 584 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 585 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 586 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 587 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 588
 589 /* controller 4, Base address 203000 */
 590 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xc0000000
 591 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 592 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc40000000ull
 593 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 594 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 595 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 596 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 597
 598 #ifdef CONFIG_PCI
 599 #define CONFIG_PCI_INDIRECT_BRIDGE
 600 #define CONFIG_FSL_PCIE_RESET      /* need PCIe reset errata */
 601 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 602 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 603 #define CONFIG_DOS_PARTITION
 604 #endif
 605
 606 /* Qman/Bman */
 607 #ifndef CONFIG_NOBQFMAN
 608 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 609 #define CONFIG_SYS_BMAN_NUM_PORTALS     18
 610 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 611 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 612 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 613 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 614 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 615 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 616 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 617 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 618                                         CONFIG_SYS_BMAN_CENA_SIZE)
 619 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 620 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 621 #define CONFIG_SYS_QMAN_NUM_PORTALS     18
 622 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 623 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 624 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 625 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 626 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 627 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 628 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 629 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 630                                         CONFIG_SYS_QMAN_CENA_SIZE)
 631 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 632 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 633
 634 #define CONFIG_SYS_DPAA_FMAN
 635 #define CONFIG_SYS_DPAA_PME
 636 #define CONFIG_SYS_PMAN
 637 #define CONFIG_SYS_DPAA_DCE
 638 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
 639 #define CONFIG_SYS_INTERLAKEN
 640
 641 /* Default address of microcode for the Linux Fman driver */
 642 #if defined(CONFIG_SPIFLASH)
 643 /*
 644  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 645  * env, so we got 0x110000.
 646  */
 647 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 648 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 649 #elif defined(CONFIG_SDCARD)
 650 /*
 651  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 652  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 653  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 654  */
 655 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 656 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 657 #elif defined(CONFIG_NAND)
 658 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 659 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 660 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 661 /*
 662  * Slave has no ucode locally, it can fetch this from remote. When implementing
 663  * in two corenet boards, slave's ucode could be stored in master's memory
 664  * space, the address can be mapped from slave TLB->slave LAW->
 665  * slave SRIO or PCIE outbound window->master inbound window->
 666  * master LAW->the ucode address in master's memory space.
 667  */
 668 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 669 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 670 #else
 671 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 672 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 673 #endif
 674 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 675 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 676 #endif /* CONFIG_NOBQFMAN */
 677
 678 #ifdef CONFIG_SYS_DPAA_FMAN
 679 #define CONFIG_FMAN_ENET
 680 #define CONFIG_PHYLIB_10G
 681 #define CONFIG_PHY_VITESSE
 682 #define CONFIG_PHY_REALTEK
 683 #define CONFIG_PHY_TERANETICS
 684 #define RGMII_PHY1_ADDR 0x1
 685 #define RGMII_PHY2_ADDR 0x2
 686 #define FM1_10GEC1_PHY_ADDR       0x3
 687 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 688 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 689 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 690 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 691 #endif
 692
 693 #ifdef CONFIG_FMAN_ENET
 694 #define CONFIG_MII              /* MII PHY management */
 695 #define CONFIG_ETHPRIME         "FM1@DTSEC3"
 696 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 697 #endif
 698
 699 /*
 700  * SATA
 701  */
 702 #ifdef CONFIG_FSL_SATA_V2
 703 #define CONFIG_LIBATA
 704 #define CONFIG_FSL_SATA
 705 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 706 #define CONFIG_SATA1
 707 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 708 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 709 #define CONFIG_SATA2
 710 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 711 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 712 #define CONFIG_LBA48
 713 #define CONFIG_CMD_SATA
 714 #define CONFIG_DOS_PARTITION
 715 #endif
 716
 717 /*
 718  * USB
 719  */
 720 #ifdef CONFIG_USB_EHCI
 721 #define CONFIG_USB_EHCI_FSL
 722 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 723 #define CONFIG_HAS_FSL_DR_USB
 724 #endif
 725
 726 /*
 727  * SDHC
 728  */
 729 #ifdef CONFIG_MMC
 730 #define CONFIG_FSL_ESDHC
 731 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 732 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 733 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 734 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 735 #define CONFIG_GENERIC_MMC
 736 #define CONFIG_DOS_PARTITION
 737 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 738 #endif
 739
 740 /*
 741  * Dynamic MTD Partition support with mtdparts
 742  */
 743 #ifndef CONFIG_SYS_NO_FLASH
 744 #define CONFIG_MTD_DEVICE
 745 #define CONFIG_MTD_PARTITIONS
 746 #define CONFIG_CMD_MTDPARTS
 747 #define CONFIG_FLASH_CFI_MTD
 748 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 749                         "spi0=spife110000.0"
 750 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 751                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 752                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 753                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 754 #endif
 755
 756 /*
 757  * Environment
 758  */
 759 #define CONFIG_LOADS_ECHO       /* echo on for serial download */
 760 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 761
 762 /*
 763  * Command line configuration.
 764  */
 765 #define CONFIG_CMD_ERRATA
 766 #define CONFIG_CMD_IRQ
 767 #define CONFIG_CMD_REGINFO
 768
 769 #ifdef CONFIG_PCI
 770 #define CONFIG_CMD_PCI
 771 #endif
 772
 773 /* Hash command with SHA acceleration supported in hardware */
 774 #ifdef CONFIG_FSL_CAAM
 775 #define CONFIG_CMD_HASH
 776 #define CONFIG_SHA_HW_ACCEL
 777 #endif
 778
 779 /*
 780  * Miscellaneous configurable options
 781  */
 782 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 783 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 784 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 785 #define CONFIG_SYS_LOAD_ADDR    0x2000000 /* default load address */
 786 #ifdef CONFIG_CMD_KGDB
 787 #define CONFIG_SYS_CBSIZE       1024      /* Console I/O Buffer Size */
 788 #else
 789 #define CONFIG_SYS_CBSIZE       256       /* Console I/O Buffer Size */
 790 #endif
 791 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 792 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 793 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 794
 795 /*
 796  * For booting Linux, the board info and command line data
 797  * have to be in the first 64 MB of memory, since this is
 798  * the maximum mapped by the Linux kernel during initialization.
 799  */
 800 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 801 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 802
 803 #ifdef CONFIG_CMD_KGDB
 804 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 805 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 806 #endif
 807
 808 /*
 809  * Environment Configuration
 810  */
 811 #define CONFIG_ROOTPATH  "/opt/nfsroot"
 812 #define CONFIG_BOOTFILE  "uImage"
 813 #define CONFIG_UBOOTPATH "u-boot.bin"   /* U-Boot image on TFTP server */
 814
 815 /* default location for tftp and bootm */
 816 #define CONFIG_LOADADDR         1000000
 817 #define CONFIG_BAUDRATE         115200
 818 #define __USB_PHY_TYPE          utmi
 819
 820 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 821         "hwconfig=fsl_ddr:"                                     \
 822         "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","      \
 823         "bank_intlv=auto;"                                      \
 824         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 825         "netdev=eth0\0"                                         \
 826         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 827         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 828         "tftpflash=tftpboot $loadaddr $uboot && "               \
 829         "protect off $ubootaddr +$filesize && "                 \
 830         "erase $ubootaddr +$filesize && "                       \
 831         "cp.b $loadaddr $ubootaddr $filesize && "               \
 832         "protect on $ubootaddr +$filesize && "                  \
 833         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 834         "consoledev=ttyS0\0"                                    \
 835         "ramdiskaddr=2000000\0"                                 \
 836         "ramdiskfile=t2080qds/ramdisk.uboot\0"                  \
 837         "fdtaddr=1e00000\0"                                     \
 838         "fdtfile=t2080qds/t2080qds.dtb\0"                       \
 839         "bdev=sda3\0"
 840
 841 /*
 842  * For emulation this causes u-boot to jump to the start of the
 843  * proof point app code automatically
 844  */
 845 #define CONFIG_PROOF_POINTS                             \
 846         "setenv bootargs root=/dev/$bdev rw "           \
 847         "console=$consoledev,$baudrate $othbootargs;"   \
 848         "cpu 1 release 0x29000000 - - -;"               \
 849         "cpu 2 release 0x29000000 - - -;"               \
 850         "cpu 3 release 0x29000000 - - -;"               \
 851         "cpu 4 release 0x29000000 - - -;"               \
 852         "cpu 5 release 0x29000000 - - -;"               \
 853         "cpu 6 release 0x29000000 - - -;"               \
 854         "cpu 7 release 0x29000000 - - -;"               \
 855         "go 0x29000000"
 856
 857 #define CONFIG_HVBOOT                           \
 858         "setenv bootargs config-addr=0x60000000; "      \
 859         "bootm 0x01000000 - 0x00f00000"
 860
 861 #define CONFIG_ALU                              \
 862         "setenv bootargs root=/dev/$bdev rw "           \
 863         "console=$consoledev,$baudrate $othbootargs;"   \
 864         "cpu 1 release 0x01000000 - - -;"               \
 865         "cpu 2 release 0x01000000 - - -;"               \
 866         "cpu 3 release 0x01000000 - - -;"               \
 867         "cpu 4 release 0x01000000 - - -;"               \
 868         "cpu 5 release 0x01000000 - - -;"               \
 869         "cpu 6 release 0x01000000 - - -;"               \
 870         "cpu 7 release 0x01000000 - - -;"               \
 871         "go 0x01000000"
 872
 873 #define CONFIG_LINUX                            \
 874         "setenv bootargs root=/dev/ram rw "             \
 875         "console=$consoledev,$baudrate $othbootargs;"   \
 876         "setenv ramdiskaddr 0x02000000;"                \
 877         "setenv fdtaddr 0x00c00000;"                    \
 878         "setenv loadaddr 0x1000000;"                    \
 879         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 880
 881 #define CONFIG_HDBOOT                                   \
 882         "setenv bootargs root=/dev/$bdev rw "           \
 883         "console=$consoledev,$baudrate $othbootargs;"   \
 884         "tftp $loadaddr $bootfile;"                     \
 885         "tftp $fdtaddr $fdtfile;"                       \
 886         "bootm $loadaddr - $fdtaddr"
 887
 888 #define CONFIG_NFSBOOTCOMMAND                   \
 889         "setenv bootargs root=/dev/nfs rw "     \
 890         "nfsroot=$serverip:$rootpath "          \
 891         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 892         "console=$consoledev,$baudrate $othbootargs;"   \
 893         "tftp $loadaddr $bootfile;"             \
 894         "tftp $fdtaddr $fdtfile;"               \
 895         "bootm $loadaddr - $fdtaddr"
 896
 897 #define CONFIG_RAMBOOTCOMMAND                           \
 898         "setenv bootargs root=/dev/ram rw "             \
 899         "console=$consoledev,$baudrate $othbootargs;"   \
 900         "tftp $ramdiskaddr $ramdiskfile;"               \
 901         "tftp $loadaddr $bootfile;"                     \
 902         "tftp $fdtaddr $fdtfile;"                       \
 903         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 904
 905 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 906
 907 #include <asm/fsl_secure_boot.h>
 908
 909 #endif  /* __T208xQDS_H */