include/configs/T104xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <linux/stringify.h>
  11
  12 /*
  13  * T104x RDB board configuration file
  14  */
  15 #include <asm/config_mpc85xx.h>
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18 #define RESET_VECTOR_OFFSET             0x27FFC
  19 #define BOOT_PAGE_OFFSET                0x27000
  20
  21 #ifdef CONFIG_MTD_RAW_NAND
  22 #ifdef CONFIG_NXP_ESBC
  23 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  24 /*
  25  * HDR would be appended at end of image and copied to DDR along
  26  * with U-Boot image.
  27  */
  28 #define CFG_SYS_NAND_U_BOOT_SIZE        ((768 << 10) + \
  29                                          CONFIG_U_BOOT_HDR_SIZE)
  30 #else
  31 #define CFG_SYS_NAND_U_BOOT_SIZE        (768 << 10)
  32 #endif
  33 #define CFG_SYS_NAND_U_BOOT_DST 0x30000000
  34 #define CFG_SYS_NAND_U_BOOT_START       0x30000000
  35 #endif
  36
  37 #ifdef CONFIG_SPIFLASH
  38 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  39 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  40 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  41 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  42 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  43 #endif
  44
  45 #ifdef CONFIG_SDCARD
  46 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  47 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  48 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  49 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  50 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  51 #endif
  52
  53 #endif
  54
  55 /* High Level Configuration Options */
  56
  57 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  58 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  59 #endif
  60
  61 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  62
  63 /*
  64  * These can be toggled for performance analysis, otherwise use default.
  65  */
  66 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  67 #ifdef CONFIG_DDR_ECC
  68 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  69 #endif
  70
  71 /*
  72  *  Config the L3 Cache as L3 SRAM
  73  */
  74 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
  75 /*
  76  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
  77  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
  78  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
  79  */
  80 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
  81 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
  82
  83 #define CONFIG_SYS_DCSRBAR              0xf0000000
  84 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
  85
  86 /*
  87  * DDR Setup
  88  */
  89 #define CONFIG_VERY_BIG_RAM
  90 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  91 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  92
  93 #define SPD_EEPROM_ADDRESS      0x51
  94
  95 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
  96
  97 /*
  98  * IFC Definitions
  99  */
 100 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 101 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 102
 103 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 104 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 105                                 CSPR_PORT_SIZE_16 | \
 106                                 CSPR_MSEL_NOR | \
 107                                 CSPR_V)
 108 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 109
 110 /*
 111  * TDM Definition
 112  */
 113 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 114
 115 /* NOR Flash Timing Params */
 116 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 117 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 118                                 FTIM0_NOR_TEADC(0x5) | \
 119                                 FTIM0_NOR_TEAHC(0x5))
 120 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 121                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 122                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 123 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 124                                 FTIM2_NOR_TCH(0x4) | \
 125                                 FTIM2_NOR_TWPH(0x0E) | \
 126                                 FTIM2_NOR_TWP(0x1c))
 127 #define CONFIG_SYS_NOR_FTIM3    0x0
 128
 129 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 130
 131 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 132
 133 /* CPLD on IFC */
 134 #define CPLD_LBMAP_MASK                 0x3F
 135 #define CPLD_BANK_SEL_MASK              0x07
 136 #define CPLD_BANK_OVERRIDE              0x40
 137 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 138 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 139 #define CPLD_LBMAP_RESET                0xFF
 140 #define CPLD_LBMAP_SHIFT                0x03
 141
 142 #if defined(CONFIG_TARGET_T1042RDB_PI)
 143 #define CPLD_DIU_SEL_DFP                0x80
 144 #elif defined(CONFIG_TARGET_T1042D4RDB)
 145 #define CPLD_DIU_SEL_DFP                0xc0
 146 #endif
 147
 148 #if defined(CONFIG_TARGET_T1040D4RDB)
 149 #define CPLD_INT_MASK_ALL               0xFF
 150 #define CPLD_INT_MASK_THERM             0x80
 151 #define CPLD_INT_MASK_DVI_DFP           0x40
 152 #define CPLD_INT_MASK_QSGMII1           0x20
 153 #define CPLD_INT_MASK_QSGMII2           0x10
 154 #define CPLD_INT_MASK_SGMI1             0x08
 155 #define CPLD_INT_MASK_SGMI2             0x04
 156 #define CPLD_INT_MASK_TDMR1             0x02
 157 #define CPLD_INT_MASK_TDMR2             0x01
 158 #endif
 159
 160 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 161 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 162 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 163 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 164                                 | CSPR_PORT_SIZE_8 \
 165                                 | CSPR_MSEL_GPCM \
 166                                 | CSPR_V)
 167 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 168 #define CONFIG_SYS_CSOR2        0x0
 169 /* CPLD Timing parameters for IFC CS2 */
 170 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 171                                         FTIM0_GPCM_TEADC(0x0e) | \
 172                                         FTIM0_GPCM_TEAHC(0x0e))
 173 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 174                                         FTIM1_GPCM_TRAD(0x1f))
 175 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 176                                         FTIM2_GPCM_TCH(0x8) | \
 177                                         FTIM2_GPCM_TWP(0x1f))
 178 #define CONFIG_SYS_CS2_FTIM3            0x0
 179
 180 /* NAND Flash on IFC */
 181 #define CFG_SYS_NAND_BASE               0xff800000
 182 #define CFG_SYS_NAND_BASE_PHYS  (0xf00000000ull | CFG_SYS_NAND_BASE)
 183
 184 #define CFG_SYS_NAND_CSPR_EXT   (0xf)
 185 #define CFG_SYS_NAND_CSPR       (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE_PHYS) \
 186                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 187                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 188                                 | CSPR_V)
 189 #define CFG_SYS_NAND_AMASK      IFC_AMASK(64*1024)
 190
 191 #define CFG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 192                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 193                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 194                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 195                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 196                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 197                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 198
 199 /* ONFI NAND Flash mode0 Timing Params */
 200 #define CFG_SYS_NAND_FTIM0              (FTIM0_NAND_TCCST(0x07) | \
 201                                         FTIM0_NAND_TWP(0x18)   | \
 202                                         FTIM0_NAND_TWCHT(0x07) | \
 203                                         FTIM0_NAND_TWH(0x0a))
 204 #define CFG_SYS_NAND_FTIM1              (FTIM1_NAND_TADLE(0x32) | \
 205                                         FTIM1_NAND_TWBE(0x39)  | \
 206                                         FTIM1_NAND_TRR(0x0e)   | \
 207                                         FTIM1_NAND_TRP(0x18))
 208 #define CFG_SYS_NAND_FTIM2              (FTIM2_NAND_TRAD(0x0f) | \
 209                                         FTIM2_NAND_TREH(0x0a) | \
 210                                         FTIM2_NAND_TWHRE(0x1e))
 211 #define CFG_SYS_NAND_FTIM3              0x0
 212
 213 #define CFG_SYS_NAND_BASE_LIST  { CFG_SYS_NAND_BASE }
 214
 215 #if defined(CONFIG_MTD_RAW_NAND)
 216 #define CONFIG_SYS_CSPR0_EXT            CFG_SYS_NAND_CSPR_EXT
 217 #define CONFIG_SYS_CSPR0                CFG_SYS_NAND_CSPR
 218 #define CONFIG_SYS_AMASK0               CFG_SYS_NAND_AMASK
 219 #define CONFIG_SYS_CSOR0                CFG_SYS_NAND_CSOR
 220 #define CONFIG_SYS_CS0_FTIM0            CFG_SYS_NAND_FTIM0
 221 #define CONFIG_SYS_CS0_FTIM1            CFG_SYS_NAND_FTIM1
 222 #define CONFIG_SYS_CS0_FTIM2            CFG_SYS_NAND_FTIM2
 223 #define CONFIG_SYS_CS0_FTIM3            CFG_SYS_NAND_FTIM3
 224 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 225 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 226 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 227 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 228 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 229 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 230 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 231 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 232 #else
 233 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 234 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 235 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 236 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 237 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 238 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 239 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 240 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 241 #define CONFIG_SYS_CSPR1_EXT            CFG_SYS_NAND_CSPR_EXT
 242 #define CONFIG_SYS_CSPR1                CFG_SYS_NAND_CSPR
 243 #define CONFIG_SYS_AMASK1               CFG_SYS_NAND_AMASK
 244 #define CONFIG_SYS_CSOR1                CFG_SYS_NAND_CSOR
 245 #define CONFIG_SYS_CS1_FTIM0            CFG_SYS_NAND_FTIM0
 246 #define CONFIG_SYS_CS1_FTIM1            CFG_SYS_NAND_FTIM1
 247 #define CONFIG_SYS_CS1_FTIM2            CFG_SYS_NAND_FTIM2
 248 #define CONFIG_SYS_CS1_FTIM3            CFG_SYS_NAND_FTIM3
 249 #endif
 250
 251 #define CONFIG_HWCONFIG
 252
 253 /* define to use L1 as initial stack */
 254 #define CONFIG_L1_INIT_RAM
 255 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 256 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 257 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 258 /* The assembler doesn't like typecast */
 259 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 260         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 261           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 262 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 263
 264 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 265
 266 /* Serial Port - controlled on board with jumper J8
 267  * open - index 2
 268  * shorted - index 1
 269  */
 270 #define CONFIG_SYS_NS16550_SERIAL
 271 #define CONFIG_SYS_NS16550_REG_SIZE     1
 272 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 273
 274 #define CONFIG_SYS_BAUDRATE_TABLE       \
 275         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 276
 277 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 278 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 279 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 280 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 281
 282 /* I2C bus multiplexer */
 283 #define I2C_MUX_PCA_ADDR                0x70
 284 #define I2C_MUX_CH_DEFAULT      0x8
 285
 286 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 287         defined(CONFIG_TARGET_T1040D4RDB)       || \
 288         defined(CONFIG_TARGET_T1042D4RDB)
 289 /*
 290  * RTC configuration
 291  */
 292 #define RTC
 293 #define CONFIG_RTC_DS1337               1
 294 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 295
 296 /*DVI encoder*/
 297 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 298 #endif
 299
 300 /*
 301  * eSPI - Enhanced SPI
 302  */
 303
 304 /*
 305  * General PCI
 306  * Memory space is mapped 1-1, but I/O space must start from 0.
 307  */
 308
 309 #ifdef CONFIG_PCI
 310 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 311 #ifdef CONFIG_PCIE1
 312 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 313 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 314 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 315 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 316 #endif
 317
 318 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 319 #ifdef CONFIG_PCIE2
 320 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 321 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 322 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 323 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 324 #endif
 325
 326 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 327 #ifdef CONFIG_PCIE3
 328 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 329 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 330 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 331 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 332 #endif
 333
 334 /* controller 4, Base address 203000 */
 335 #ifdef CONFIG_PCIE4
 336 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 337 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 338 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 339 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 340 #endif
 341 #endif  /* CONFIG_PCI */
 342
 343 /*
 344 * USB
 345 */
 346
 347 #ifdef CONFIG_MMC
 348 #define CFG_SYS_FSL_ESDHC_ADDR       CFG_SYS_MPC85xx_ESDHC_ADDR
 349 #endif
 350
 351 /* Qman/Bman */
 352 #ifndef CONFIG_NOBQFMAN
 353 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 354 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 355 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 356 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 357 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 358 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 359 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 360 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 361 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 362                                         CONFIG_SYS_BMAN_CENA_SIZE)
 363 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 364 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 365 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 366 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 367 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 368 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 369 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 370 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 371 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 372 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 373 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 374                                         CONFIG_SYS_QMAN_CENA_SIZE)
 375 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 376 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 377
 378 #define CONFIG_SYS_DPAA_FMAN
 379 #define CONFIG_SYS_DPAA_PME
 380 #endif /* CONFIG_NOBQFMAN */
 381
 382 #ifdef CONFIG_FMAN_ENET
 383 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 384 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 385 #elif defined(CONFIG_TARGET_T1040D4RDB)
 386 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 387 #elif defined(CONFIG_TARGET_T1042D4RDB)
 388 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 389 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 390 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 391 #endif
 392
 393 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 394 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 395 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 396 #else
 397 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 398 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 399 #endif
 400
 401 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 402 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 403 #define CONFIG_VSC9953
 404 #ifdef CONFIG_TARGET_T1040RDB
 405 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 406 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 407 #else
 408 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 409 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 410 #endif
 411 #endif
 412 #endif
 413
 414 /*
 415  * Miscellaneous configurable options
 416  */
 417
 418 /*
 419  * For booting Linux, the board info and command line data
 420  * have to be in the first 64 MB of memory, since this is
 421  * the maximum mapped by the Linux kernel during initialization.
 422  */
 423 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 424
 425 /*
 426  * Dynamic MTD Partition support with mtdparts
 427  */
 428
 429 /*
 430  * Environment Configuration
 431  */
 432 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 433 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 434
 435 #define __USB_PHY_TYPE  utmi
 436 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 437
 438 #ifdef CONFIG_TARGET_T1040RDB
 439 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 440 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 441 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 442 #elif defined(CONFIG_TARGET_T1042RDB)
 443 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 444 #elif defined(CONFIG_TARGET_T1040D4RDB)
 445 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 446 #elif defined(CONFIG_TARGET_T1042D4RDB)
 447 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 448 #endif
 449
 450 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 451         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 452         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 453         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 454         "netdev=eth0\0"                                         \
 455         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 456         "ubootaddr=" __stringify(CONFIG_TEXT_BASE) "\0" \
 457         "tftpflash=tftpboot $loadaddr $uboot && "               \
 458         "protect off $ubootaddr +$filesize && "                 \
 459         "erase $ubootaddr +$filesize && "                       \
 460         "cp.b $loadaddr $ubootaddr $filesize && "               \
 461         "protect on $ubootaddr +$filesize && "                  \
 462         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 463         "consoledev=ttyS0\0"                                    \
 464         "ramdiskaddr=2000000\0"                                 \
 465         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 466         "fdtaddr=1e00000\0"                                     \
 467         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 468         "bdev=sda3\0"
 469
 470 #include <asm/fsl_secure_boot.h>
 471
 472 #endif  /* __CONFIG_H */