include/configs/T104xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /*
  10  * T104x RDB board configuration file
  11  */
  12 #include <asm/config_mpc85xx.h>
  13
  14 #ifdef CONFIG_RAMBOOT_PBL
  15
  16 #ifndef CONFIG_SECURE_BOOT
  17 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  18 #else
  19 #define CONFIG_SYS_FSL_PBL_PBI \
  20                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  21 #endif
  22
  23 #define CONFIG_SPL_FLUSH_IMAGE
  24 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  25 #define CONFIG_SPL_PAD_TO               0x40000
  26 #define CONFIG_SPL_MAX_SIZE             0x28000
  27 #ifdef CONFIG_SPL_BUILD
  28 #define CONFIG_SPL_SKIP_RELOCATE
  29 #define CONFIG_SPL_COMMON_INIT_DDR
  30 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  31 #endif
  32 #define RESET_VECTOR_OFFSET             0x27FFC
  33 #define BOOT_PAGE_OFFSET                0x27000
  34
  35 #ifdef CONFIG_NAND
  36 #ifdef CONFIG_SECURE_BOOT
  37 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  38 /*
  39  * HDR would be appended at end of image and copied to DDR along
  40  * with U-Boot image.
  41  */
  42 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  43                                          CONFIG_U_BOOT_HDR_SIZE)
  44 #else
  45 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  46 #endif
  47 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  48 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  49 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  50 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  51 #ifdef CONFIG_TARGET_T1040RDB
  52 #define CONFIG_SYS_FSL_PBL_RCW \
  53 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  54 #endif
  55 #ifdef CONFIG_TARGET_T1042RDB_PI
  56 #define CONFIG_SYS_FSL_PBL_RCW \
  57 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  58 #endif
  59 #ifdef CONFIG_TARGET_T1042RDB
  60 #define CONFIG_SYS_FSL_PBL_RCW \
  61 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  62 #endif
  63 #ifdef CONFIG_TARGET_T1040D4RDB
  64 #define CONFIG_SYS_FSL_PBL_RCW \
  65 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  66 #endif
  67 #ifdef CONFIG_TARGET_T1042D4RDB
  68 #define CONFIG_SYS_FSL_PBL_RCW \
  69 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  70 #endif
  71 #define CONFIG_SPL_NAND_BOOT
  72 #endif
  73
  74 #ifdef CONFIG_SPIFLASH
  75 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  76 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  81 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  82 #ifndef CONFIG_SPL_BUILD
  83 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  84 #endif
  85 #ifdef CONFIG_TARGET_T1040RDB
  86 #define CONFIG_SYS_FSL_PBL_RCW \
  87 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  88 #endif
  89 #ifdef CONFIG_TARGET_T1042RDB_PI
  90 #define CONFIG_SYS_FSL_PBL_RCW \
  91 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  92 #endif
  93 #ifdef CONFIG_TARGET_T1042RDB
  94 #define CONFIG_SYS_FSL_PBL_RCW \
  95 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
  96 #endif
  97 #ifdef CONFIG_TARGET_T1040D4RDB
  98 #define CONFIG_SYS_FSL_PBL_RCW \
  99 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 100 #endif
 101 #ifdef CONFIG_TARGET_T1042D4RDB
 102 #define CONFIG_SYS_FSL_PBL_RCW \
 103 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 104 #endif
 105 #define CONFIG_SPL_SPI_BOOT
 106 #endif
 107
 108 #ifdef CONFIG_SDCARD
 109 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 110 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 111 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 112 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 113 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 114 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 115 #ifndef CONFIG_SPL_BUILD
 116 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 117 #endif
 118 #ifdef CONFIG_TARGET_T1040RDB
 119 #define CONFIG_SYS_FSL_PBL_RCW \
 120 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 121 #endif
 122 #ifdef CONFIG_TARGET_T1042RDB_PI
 123 #define CONFIG_SYS_FSL_PBL_RCW \
 124 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 125 #endif
 126 #ifdef CONFIG_TARGET_T1042RDB
 127 #define CONFIG_SYS_FSL_PBL_RCW \
 128 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 129 #endif
 130 #ifdef CONFIG_TARGET_T1040D4RDB
 131 #define CONFIG_SYS_FSL_PBL_RCW \
 132 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 133 #endif
 134 #ifdef CONFIG_TARGET_T1042D4RDB
 135 #define CONFIG_SYS_FSL_PBL_RCW \
 136 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 137 #endif
 138 #define CONFIG_SPL_MMC_BOOT
 139 #endif
 140
 141 #endif
 142
 143 /* High Level Configuration Options */
 144 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 145
 146 /* support deep sleep */
 147 #define CONFIG_DEEP_SLEEP
 148
 149 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 150 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 151 #endif
 152
 153 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 154 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 155 #define CONFIG_PCI_INDIRECT_BRIDGE
 156 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 157 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 158 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 159 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 160
 161 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 162 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 163
 164 #define CONFIG_ENV_OVERWRITE
 165
 166 #if defined(CONFIG_SPIFLASH)
 167 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 168 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 169 #define CONFIG_ENV_SECT_SIZE            0x10000
 170 #elif defined(CONFIG_SDCARD)
 171 #define CONFIG_SYS_MMC_ENV_DEV          0
 172 #define CONFIG_ENV_SIZE                 0x2000
 173 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 174 #elif defined(CONFIG_NAND)
 175 #ifdef CONFIG_SECURE_BOOT
 176 #define CONFIG_RAMBOOT_NAND
 177 #define CONFIG_BOOTSCRIPT_COPY_RAM
 178 #endif
 179 #define CONFIG_ENV_SIZE                 0x2000
 180 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 181 #else
 182 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 183 #define CONFIG_ENV_SIZE         0x2000
 184 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 185 #endif
 186
 187 #define CONFIG_SYS_CLK_FREQ     100000000
 188 #define CONFIG_DDR_CLK_FREQ     66666666
 189
 190 /*
 191  * These can be toggled for performance analysis, otherwise use default.
 192  */
 193 #define CONFIG_SYS_CACHE_STASHING
 194 #define CONFIG_BACKSIDE_L2_CACHE
 195 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 196 #define CONFIG_BTB                      /* toggle branch predition */
 197 #define CONFIG_DDR_ECC
 198 #ifdef CONFIG_DDR_ECC
 199 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 200 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 201 #endif
 202
 203 #define CONFIG_ENABLE_36BIT_PHYS
 204
 205 #define CONFIG_ADDR_MAP
 206 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 207
 208 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 209 #define CONFIG_SYS_MEMTEST_END          0x00400000
 210
 211 /*
 212  *  Config the L3 Cache as L3 SRAM
 213  */
 214 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 215 /*
 216  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 217  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 218  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 219  */
 220 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 221 #define CONFIG_SYS_L3_SIZE              256 << 10
 222 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 223 #ifdef CONFIG_RAMBOOT_PBL
 224 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 225 #endif
 226 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 227 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 228 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 229
 230 #define CONFIG_SYS_DCSRBAR              0xf0000000
 231 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 232
 233 /*
 234  * DDR Setup
 235  */
 236 #define CONFIG_VERY_BIG_RAM
 237 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 238 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 239
 240 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 241 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 242
 243 #define CONFIG_DDR_SPD
 244
 245 #define CONFIG_SYS_SPD_BUS_NUM  0
 246 #define SPD_EEPROM_ADDRESS      0x51
 247
 248 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 249
 250 /*
 251  * IFC Definitions
 252  */
 253 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 254 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 255
 256 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 257 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 258                                 CSPR_PORT_SIZE_16 | \
 259                                 CSPR_MSEL_NOR | \
 260                                 CSPR_V)
 261 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 262
 263 /*
 264  * TDM Definition
 265  */
 266 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 267
 268 /* NOR Flash Timing Params */
 269 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 270 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 271                                 FTIM0_NOR_TEADC(0x5) | \
 272                                 FTIM0_NOR_TEAHC(0x5))
 273 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 274                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 275                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 276 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 277                                 FTIM2_NOR_TCH(0x4) | \
 278                                 FTIM2_NOR_TWPH(0x0E) | \
 279                                 FTIM2_NOR_TWP(0x1c))
 280 #define CONFIG_SYS_NOR_FTIM3    0x0
 281
 282 #define CONFIG_SYS_FLASH_QUIET_TEST
 283 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 284
 285 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 286 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 287 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 288 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 289
 290 #define CONFIG_SYS_FLASH_EMPTY_INFO
 291 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 292
 293 /* CPLD on IFC */
 294 #define CPLD_LBMAP_MASK                 0x3F
 295 #define CPLD_BANK_SEL_MASK              0x07
 296 #define CPLD_BANK_OVERRIDE              0x40
 297 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 298 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 299 #define CPLD_LBMAP_RESET                0xFF
 300 #define CPLD_LBMAP_SHIFT                0x03
 301
 302 #if defined(CONFIG_TARGET_T1042RDB_PI)
 303 #define CPLD_DIU_SEL_DFP                0x80
 304 #elif defined(CONFIG_TARGET_T1042D4RDB)
 305 #define CPLD_DIU_SEL_DFP                0xc0
 306 #endif
 307
 308 #if defined(CONFIG_TARGET_T1040D4RDB)
 309 #define CPLD_INT_MASK_ALL               0xFF
 310 #define CPLD_INT_MASK_THERM             0x80
 311 #define CPLD_INT_MASK_DVI_DFP           0x40
 312 #define CPLD_INT_MASK_QSGMII1           0x20
 313 #define CPLD_INT_MASK_QSGMII2           0x10
 314 #define CPLD_INT_MASK_SGMI1             0x08
 315 #define CPLD_INT_MASK_SGMI2             0x04
 316 #define CPLD_INT_MASK_TDMR1             0x02
 317 #define CPLD_INT_MASK_TDMR2             0x01
 318 #endif
 319
 320 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 321 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 322 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 323 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 324                                 | CSPR_PORT_SIZE_8 \
 325                                 | CSPR_MSEL_GPCM \
 326                                 | CSPR_V)
 327 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 328 #define CONFIG_SYS_CSOR2        0x0
 329 /* CPLD Timing parameters for IFC CS2 */
 330 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 331                                         FTIM0_GPCM_TEADC(0x0e) | \
 332                                         FTIM0_GPCM_TEAHC(0x0e))
 333 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 334                                         FTIM1_GPCM_TRAD(0x1f))
 335 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 336                                         FTIM2_GPCM_TCH(0x8) | \
 337                                         FTIM2_GPCM_TWP(0x1f))
 338 #define CONFIG_SYS_CS2_FTIM3            0x0
 339
 340 /* NAND Flash on IFC */
 341 #define CONFIG_NAND_FSL_IFC
 342 #define CONFIG_SYS_NAND_BASE            0xff800000
 343 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 344
 345 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 346 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 347                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 348                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 349                                 | CSPR_V)
 350 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 351
 352 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 353                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 354                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 355                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 356                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 357                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 358                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 359
 360 #define CONFIG_SYS_NAND_ONFI_DETECTION
 361
 362 /* ONFI NAND Flash mode0 Timing Params */
 363 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 364                                         FTIM0_NAND_TWP(0x18)   | \
 365                                         FTIM0_NAND_TWCHT(0x07) | \
 366                                         FTIM0_NAND_TWH(0x0a))
 367 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 368                                         FTIM1_NAND_TWBE(0x39)  | \
 369                                         FTIM1_NAND_TRR(0x0e)   | \
 370                                         FTIM1_NAND_TRP(0x18))
 371 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 372                                         FTIM2_NAND_TREH(0x0a) | \
 373                                         FTIM2_NAND_TWHRE(0x1e))
 374 #define CONFIG_SYS_NAND_FTIM3           0x0
 375
 376 #define CONFIG_SYS_NAND_DDR_LAW         11
 377 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 378 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 379
 380 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 381
 382 #if defined(CONFIG_NAND)
 383 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 384 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 385 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 386 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 387 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 388 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 389 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 390 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 391 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 392 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 393 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 394 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 395 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 396 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 397 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 398 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 399 #else
 400 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 401 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 402 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 403 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 404 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 405 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 406 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 407 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 408 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 409 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 410 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 411 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 412 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 413 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 414 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 415 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 416 #endif
 417
 418 #ifdef CONFIG_SPL_BUILD
 419 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 420 #else
 421 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 422 #endif
 423
 424 #if defined(CONFIG_RAMBOOT_PBL)
 425 #define CONFIG_SYS_RAMBOOT
 426 #endif
 427
 428 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 429 #if defined(CONFIG_NAND)
 430 #define CONFIG_A008044_WORKAROUND
 431 #endif
 432 #endif
 433
 434 #define CONFIG_HWCONFIG
 435
 436 /* define to use L1 as initial stack */
 437 #define CONFIG_L1_INIT_RAM
 438 #define CONFIG_SYS_INIT_RAM_LOCK
 439 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 440 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 441 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 442 /* The assembler doesn't like typecast */
 443 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 444         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 445           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 446 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 447
 448 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 449                                         GENERATED_GBL_DATA_SIZE)
 450 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 451
 452 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 453 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 454
 455 /* Serial Port - controlled on board with jumper J8
 456  * open - index 2
 457  * shorted - index 1
 458  */
 459 #define CONFIG_SYS_NS16550_SERIAL
 460 #define CONFIG_SYS_NS16550_REG_SIZE     1
 461 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 462
 463 #define CONFIG_SYS_BAUDRATE_TABLE       \
 464         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 465
 466 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 467 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 468 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 469 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 470
 471 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 472 /* Video */
 473 #define CONFIG_FSL_DIU_FB
 474
 475 #ifdef CONFIG_FSL_DIU_FB
 476 #define CONFIG_FSL_DIU_CH7301
 477 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 478 #define CONFIG_VIDEO_LOGO
 479 #define CONFIG_VIDEO_BMP_LOGO
 480 #endif
 481 #endif
 482
 483 /* I2C */
 484 #define CONFIG_SYS_I2C
 485 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 486 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 487 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 488 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 489 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 490 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 491 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 492 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 493 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 494 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 495 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 496 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 497 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 498
 499 /* I2C bus multiplexer */
 500 #define I2C_MUX_PCA_ADDR                0x70
 501 #define I2C_MUX_CH_DEFAULT      0x8
 502
 503 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 504         defined(CONFIG_TARGET_T1040D4RDB)       || \
 505         defined(CONFIG_TARGET_T1042D4RDB)
 506 /* LDI/DVI Encoder for display */
 507 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 508 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 509
 510 /*
 511  * RTC configuration
 512  */
 513 #define RTC
 514 #define CONFIG_RTC_DS1337               1
 515 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 516
 517 /*DVI encoder*/
 518 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 519 #endif
 520
 521 /*
 522  * eSPI - Enhanced SPI
 523  */
 524
 525 /*
 526  * General PCI
 527  * Memory space is mapped 1-1, but I/O space must start from 0.
 528  */
 529
 530 #ifdef CONFIG_PCI
 531 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 532 #ifdef CONFIG_PCIE1
 533 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 534 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 535 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 536 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 537 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 538 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 539 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 540 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 541 #endif
 542
 543 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 544 #ifdef CONFIG_PCIE2
 545 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 546 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 547 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 548 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 549 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 550 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 551 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 552 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 553 #endif
 554
 555 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 556 #ifdef CONFIG_PCIE3
 557 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 558 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 559 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 560 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 561 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 562 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 563 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 564 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 565 #endif
 566
 567 /* controller 4, Base address 203000 */
 568 #ifdef CONFIG_PCIE4
 569 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 570 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 571 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 572 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 573 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 574 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 575 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 576 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 577 #endif
 578
 579 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 580 #endif  /* CONFIG_PCI */
 581
 582 /* SATA */
 583 #define CONFIG_FSL_SATA_V2
 584 #ifdef CONFIG_FSL_SATA_V2
 585 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 586 #define CONFIG_SATA1
 587 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 588 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 589
 590 #define CONFIG_LBA48
 591 #endif
 592
 593 /*
 594 * USB
 595 */
 596 #define CONFIG_HAS_FSL_DR_USB
 597
 598 #ifdef CONFIG_HAS_FSL_DR_USB
 599 #ifdef CONFIG_USB_EHCI_HCD
 600 #define CONFIG_USB_EHCI_FSL
 601 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 602 #endif
 603 #endif
 604
 605 #ifdef CONFIG_MMC
 606 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 607 #endif
 608
 609 /* Qman/Bman */
 610 #ifndef CONFIG_NOBQFMAN
 611 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 612 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 613 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 614 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 615 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 616 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 617 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 618 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 619 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 620                                         CONFIG_SYS_BMAN_CENA_SIZE)
 621 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 622 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 623 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 624 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 625 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 626 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 627 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 628 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 629 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 630 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 631 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 632                                         CONFIG_SYS_QMAN_CENA_SIZE)
 633 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 634 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 635
 636 #define CONFIG_SYS_DPAA_FMAN
 637 #define CONFIG_SYS_DPAA_PME
 638
 639 #define CONFIG_QE
 640 #define CONFIG_U_QE
 641
 642 /* Default address of microcode for the Linux Fman driver */
 643 #if defined(CONFIG_SPIFLASH)
 644 /*
 645  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 646  * env, so we got 0x110000.
 647  */
 648 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 649 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 650 #elif defined(CONFIG_SDCARD)
 651 /*
 652  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 653  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 654  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 655  */
 656 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 657 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 658 #elif defined(CONFIG_NAND)
 659 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 660 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 661 #else
 662 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 663 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 664 #endif
 665
 666 #if defined(CONFIG_SPIFLASH)
 667 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 668 #elif defined(CONFIG_SDCARD)
 669 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 670 #elif defined(CONFIG_NAND)
 671 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 672 #else
 673 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 674 #endif
 675
 676 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 677 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 678 #endif /* CONFIG_NOBQFMAN */
 679
 680 #ifdef CONFIG_SYS_DPAA_FMAN
 681 #define CONFIG_FMAN_ENET
 682 #define CONFIG_PHY_VITESSE
 683 #define CONFIG_PHY_REALTEK
 684 #endif
 685
 686 #ifdef CONFIG_FMAN_ENET
 687 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 688 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 689 #elif defined(CONFIG_TARGET_T1040D4RDB)
 690 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 691 #elif defined(CONFIG_TARGET_T1042D4RDB)
 692 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 693 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 694 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 695 #endif
 696
 697 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 698 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 699 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 700 #else
 701 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 702 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 703 #endif
 704
 705 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 706 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 707 #define CONFIG_VSC9953
 708 #ifdef CONFIG_TARGET_T1040RDB
 709 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 710 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 711 #else
 712 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 713 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 714 #endif
 715 #endif
 716
 717 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 718 #endif
 719
 720 /*
 721  * Environment
 722  */
 723 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 724 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 725
 726 /*
 727  * Miscellaneous configurable options
 728  */
 729 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 730
 731 /*
 732  * For booting Linux, the board info and command line data
 733  * have to be in the first 64 MB of memory, since this is
 734  * the maximum mapped by the Linux kernel during initialization.
 735  */
 736 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 737 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 738
 739 #ifdef CONFIG_CMD_KGDB
 740 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 741 #endif
 742
 743 /*
 744  * Dynamic MTD Partition support with mtdparts
 745  */
 746
 747 /*
 748  * Environment Configuration
 749  */
 750 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 751 #define CONFIG_BOOTFILE         "uImage"
 752 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 753
 754 /* default location for tftp and bootm */
 755 #define CONFIG_LOADADDR         1000000
 756
 757 #define __USB_PHY_TYPE  utmi
 758 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 759
 760 #ifdef CONFIG_TARGET_T1040RDB
 761 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 762 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 763 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 764 #elif defined(CONFIG_TARGET_T1042RDB)
 765 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 766 #elif defined(CONFIG_TARGET_T1040D4RDB)
 767 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 768 #elif defined(CONFIG_TARGET_T1042D4RDB)
 769 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 770 #endif
 771
 772 #ifdef CONFIG_FSL_DIU_FB
 773 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 774 #else
 775 #define DIU_ENVIRONMENT
 776 #endif
 777
 778 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 779         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 780         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 781         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 782         "netdev=eth0\0"                                         \
 783         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 784         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 785         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 786         "tftpflash=tftpboot $loadaddr $uboot && "               \
 787         "protect off $ubootaddr +$filesize && "                 \
 788         "erase $ubootaddr +$filesize && "                       \
 789         "cp.b $loadaddr $ubootaddr $filesize && "               \
 790         "protect on $ubootaddr +$filesize && "                  \
 791         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 792         "consoledev=ttyS0\0"                                    \
 793         "ramdiskaddr=2000000\0"                                 \
 794         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 795         "fdtaddr=1e00000\0"                                     \
 796         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 797         "bdev=sda3\0"
 798
 799 #define CONFIG_LINUX                       \
 800         "setenv bootargs root=/dev/ram rw "            \
 801         "console=$consoledev,$baudrate $othbootargs;"  \
 802         "setenv ramdiskaddr 0x02000000;"               \
 803         "setenv fdtaddr 0x00c00000;"                   \
 804         "setenv loadaddr 0x1000000;"                   \
 805         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 806
 807 #define CONFIG_HDBOOT                                   \
 808         "setenv bootargs root=/dev/$bdev rw "           \
 809         "console=$consoledev,$baudrate $othbootargs;"   \
 810         "tftp $loadaddr $bootfile;"                     \
 811         "tftp $fdtaddr $fdtfile;"                       \
 812         "bootm $loadaddr - $fdtaddr"
 813
 814 #define CONFIG_NFSBOOTCOMMAND                   \
 815         "setenv bootargs root=/dev/nfs rw "     \
 816         "nfsroot=$serverip:$rootpath "          \
 817         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 818         "console=$consoledev,$baudrate $othbootargs;"   \
 819         "tftp $loadaddr $bootfile;"             \
 820         "tftp $fdtaddr $fdtfile;"               \
 821         "bootm $loadaddr - $fdtaddr"
 822
 823 #define CONFIG_RAMBOOTCOMMAND                           \
 824         "setenv bootargs root=/dev/ram rw "             \
 825         "console=$consoledev,$baudrate $othbootargs;"   \
 826         "tftp $ramdiskaddr $ramdiskfile;"               \
 827         "tftp $loadaddr $bootfile;"                     \
 828         "tftp $fdtaddr $fdtfile;"                       \
 829         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 830
 831 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 832
 833 #include <asm/fsl_secure_boot.h>
 834
 835 #endif  /* __CONFIG_H */