include/configs/T104xRDB.h

   1 /*
   2 + * Copyright 2014 Freescale Semiconductor, Inc.
   3 + *
   4 + * SPDX-License-Identifier:     GPL-2.0+
   5 + */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * T104x RDB board configuration file
  12  */
  13 #define CONFIG_T104xRDB
  14
  15 #define CONFIG_E500                     /* BOOKE e500 family */
  16 #include <asm/config_mpc85xx.h>
  17
  18 #ifdef CONFIG_RAMBOOT_PBL
  19
  20 #ifndef CONFIG_SECURE_BOOT
  21 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  22 #else
  23 #define CONFIG_SYS_FSL_PBL_PBI \
  24                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  25 #endif
  26
  27 #define CONFIG_SPL_FLUSH_IMAGE
  28 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  29 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  30 #define CONFIG_SYS_TEXT_BASE            0x30001000
  31 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  32 #define CONFIG_SPL_PAD_TO               0x40000
  33 #define CONFIG_SPL_MAX_SIZE             0x28000
  34 #ifdef CONFIG_SPL_BUILD
  35 #define CONFIG_SPL_SKIP_RELOCATE
  36 #define CONFIG_SPL_COMMON_INIT_DDR
  37 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  38 #define CONFIG_SYS_NO_FLASH
  39 #endif
  40 #define RESET_VECTOR_OFFSET             0x27FFC
  41 #define BOOT_PAGE_OFFSET                0x27000
  42
  43 #ifdef CONFIG_NAND
  44 #ifdef CONFIG_SECURE_BOOT
  45 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  46 /*
  47  * HDR would be appended at end of image and copied to DDR along
  48  * with U-Boot image.
  49  */
  50 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  51                                          CONFIG_U_BOOT_HDR_SIZE)
  52 #else
  53 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  54 #endif
  55 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  56 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  57 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  58 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  59 #ifdef CONFIG_T1040RDB
  60 #define CONFIG_SYS_FSL_PBL_RCW \
  61 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  62 #endif
  63 #ifdef CONFIG_T1042RDB_PI
  64 #define CONFIG_SYS_FSL_PBL_RCW \
  65 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  66 #endif
  67 #ifdef CONFIG_T1042RDB
  68 #define CONFIG_SYS_FSL_PBL_RCW \
  69 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  70 #endif
  71 #ifdef CONFIG_T1040D4RDB
  72 #define CONFIG_SYS_FSL_PBL_RCW \
  73 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  74 #endif
  75 #ifdef CONFIG_T1042D4RDB
  76 #define CONFIG_SYS_FSL_PBL_RCW \
  77 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  78 #endif
  79 #define CONFIG_SPL_NAND_BOOT
  80 #endif
  81
  82 #ifdef CONFIG_SPIFLASH
  83 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  84 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  85 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  86 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  87 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  88 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  89 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  90 #ifndef CONFIG_SPL_BUILD
  91 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  92 #endif
  93 #ifdef CONFIG_T1040RDB
  94 #define CONFIG_SYS_FSL_PBL_RCW \
  95 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  96 #endif
  97 #ifdef CONFIG_T1042RDB_PI
  98 #define CONFIG_SYS_FSL_PBL_RCW \
  99 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
 100 #endif
 101 #ifdef CONFIG_T1042RDB
 102 #define CONFIG_SYS_FSL_PBL_RCW \
 103 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
 104 #endif
 105 #ifdef CONFIG_T1040D4RDB
 106 #define CONFIG_SYS_FSL_PBL_RCW \
 107 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 108 #endif
 109 #ifdef CONFIG_T1042D4RDB
 110 #define CONFIG_SYS_FSL_PBL_RCW \
 111 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 112 #endif
 113 #define CONFIG_SPL_SPI_BOOT
 114 #endif
 115
 116 #ifdef CONFIG_SDCARD
 117 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 118 #define CONFIG_SPL_MMC_MINIMAL
 119 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 120 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 121 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 122 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 123 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 124 #ifndef CONFIG_SPL_BUILD
 125 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 126 #endif
 127 #ifdef CONFIG_T1040RDB
 128 #define CONFIG_SYS_FSL_PBL_RCW \
 129 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 130 #endif
 131 #ifdef CONFIG_T1042RDB_PI
 132 #define CONFIG_SYS_FSL_PBL_RCW \
 133 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 134 #endif
 135 #ifdef CONFIG_T1042RDB
 136 #define CONFIG_SYS_FSL_PBL_RCW \
 137 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 138 #endif
 139 #ifdef CONFIG_T1040D4RDB
 140 #define CONFIG_SYS_FSL_PBL_RCW \
 141 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 142 #endif
 143 #ifdef CONFIG_T1042D4RDB
 144 #define CONFIG_SYS_FSL_PBL_RCW \
 145 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 146 #endif
 147 #define CONFIG_SPL_MMC_BOOT
 148 #endif
 149
 150 #endif
 151
 152 /* High Level Configuration Options */
 153 #define CONFIG_BOOKE
 154 #define CONFIG_E500MC                   /* BOOKE e500mc family */
 155 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 156 #define CONFIG_MP                       /* support multiple processors */
 157
 158 /* support deep sleep */
 159 #define CONFIG_DEEP_SLEEP
 160 #if defined(CONFIG_DEEP_SLEEP)
 161 #define CONFIG_BOARD_EARLY_INIT_F
 162 #endif
 163
 164 #ifndef CONFIG_SYS_TEXT_BASE
 165 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 166 #endif
 167
 168 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 169 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 170 #endif
 171
 172 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 173 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
 174 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 175 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 176 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 177 #define CONFIG_PCI_INDIRECT_BRIDGE
 178 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 179 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 180 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 181 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 182
 183 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 184 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 185
 186 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 187
 188 #define CONFIG_ENV_OVERWRITE
 189
 190 #ifndef CONFIG_SYS_NO_FLASH
 191 #define CONFIG_FLASH_CFI_DRIVER
 192 #define CONFIG_SYS_FLASH_CFI
 193 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 194 #endif
 195
 196 #if defined(CONFIG_SPIFLASH)
 197 #define CONFIG_SYS_EXTRA_ENV_RELOC
 198 #define CONFIG_ENV_IS_IN_SPI_FLASH
 199 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 200 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 201 #define CONFIG_ENV_SECT_SIZE            0x10000
 202 #elif defined(CONFIG_SDCARD)
 203 #define CONFIG_SYS_EXTRA_ENV_RELOC
 204 #define CONFIG_ENV_IS_IN_MMC
 205 #define CONFIG_SYS_MMC_ENV_DEV          0
 206 #define CONFIG_ENV_SIZE                 0x2000
 207 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 208 #elif defined(CONFIG_NAND)
 209 #ifdef CONFIG_SECURE_BOOT
 210 #define CONFIG_RAMBOOT_NAND
 211 #define CONFIG_BOOTSCRIPT_COPY_RAM
 212 #endif
 213 #define CONFIG_SYS_EXTRA_ENV_RELOC
 214 #define CONFIG_ENV_IS_IN_NAND
 215 #define CONFIG_ENV_SIZE                 0x2000
 216 #define CONFIG_ENV_OFFSET               (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 217 #else
 218 #define CONFIG_ENV_IS_IN_FLASH
 219 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 220 #define CONFIG_ENV_SIZE         0x2000
 221 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 222 #endif
 223
 224 #define CONFIG_SYS_CLK_FREQ     100000000
 225 #define CONFIG_DDR_CLK_FREQ     66666666
 226
 227 /*
 228  * These can be toggled for performance analysis, otherwise use default.
 229  */
 230 #define CONFIG_SYS_CACHE_STASHING
 231 #define CONFIG_BACKSIDE_L2_CACHE
 232 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 233 #define CONFIG_BTB                      /* toggle branch predition */
 234 #define CONFIG_DDR_ECC
 235 #ifdef CONFIG_DDR_ECC
 236 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 237 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 238 #endif
 239
 240 #define CONFIG_ENABLE_36BIT_PHYS
 241
 242 #define CONFIG_ADDR_MAP
 243 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 244
 245 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 246 #define CONFIG_SYS_MEMTEST_END          0x00400000
 247 #define CONFIG_SYS_ALT_MEMTEST
 248 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 249
 250 /*
 251  *  Config the L3 Cache as L3 SRAM
 252  */
 253 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 254 /*
 255  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 256  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 257  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 258  */
 259 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 260 #define CONFIG_SYS_L3_SIZE              256 << 10
 261 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 262 #ifdef CONFIG_RAMBOOT_PBL
 263 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 264 #endif
 265 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 266 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 267 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 268 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 269
 270 #define CONFIG_SYS_DCSRBAR              0xf0000000
 271 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 272
 273 /*
 274  * DDR Setup
 275  */
 276 #define CONFIG_VERY_BIG_RAM
 277 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 278 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 279
 280 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 281 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 282 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 283
 284 #define CONFIG_DDR_SPD
 285 #ifndef CONFIG_SYS_FSL_DDR4
 286 #define CONFIG_SYS_FSL_DDR3
 287 #endif
 288
 289 #define CONFIG_SYS_SPD_BUS_NUM  0
 290 #define SPD_EEPROM_ADDRESS      0x51
 291
 292 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 293
 294 /*
 295  * IFC Definitions
 296  */
 297 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 298 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 299
 300 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 301 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 302                                 CSPR_PORT_SIZE_16 | \
 303                                 CSPR_MSEL_NOR | \
 304                                 CSPR_V)
 305 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 306
 307 /*
 308  * TDM Definition
 309  */
 310 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 311
 312 /* NOR Flash Timing Params */
 313 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 314 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 315                                 FTIM0_NOR_TEADC(0x5) | \
 316                                 FTIM0_NOR_TEAHC(0x5))
 317 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 318                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 319                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 320 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 321                                 FTIM2_NOR_TCH(0x4) | \
 322                                 FTIM2_NOR_TWPH(0x0E) | \
 323                                 FTIM2_NOR_TWP(0x1c))
 324 #define CONFIG_SYS_NOR_FTIM3    0x0
 325
 326 #define CONFIG_SYS_FLASH_QUIET_TEST
 327 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 328
 329 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 330 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 331 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 332 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 333
 334 #define CONFIG_SYS_FLASH_EMPTY_INFO
 335 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 336
 337 /* CPLD on IFC */
 338 #define CPLD_LBMAP_MASK                 0x3F
 339 #define CPLD_BANK_SEL_MASK              0x07
 340 #define CPLD_BANK_OVERRIDE              0x40
 341 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 342 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 343 #define CPLD_LBMAP_RESET                0xFF
 344 #define CPLD_LBMAP_SHIFT                0x03
 345
 346 #if defined(CONFIG_T1042RDB_PI)
 347 #define CPLD_DIU_SEL_DFP                0x80
 348 #elif defined(CONFIG_T1042D4RDB)
 349 #define CPLD_DIU_SEL_DFP                0xc0
 350 #endif
 351
 352 #if defined(CONFIG_T1040D4RDB)
 353 #define CPLD_INT_MASK_ALL               0xFF
 354 #define CPLD_INT_MASK_THERM             0x80
 355 #define CPLD_INT_MASK_DVI_DFP           0x40
 356 #define CPLD_INT_MASK_QSGMII1           0x20
 357 #define CPLD_INT_MASK_QSGMII2           0x10
 358 #define CPLD_INT_MASK_SGMI1             0x08
 359 #define CPLD_INT_MASK_SGMI2             0x04
 360 #define CPLD_INT_MASK_TDMR1             0x02
 361 #define CPLD_INT_MASK_TDMR2             0x01
 362 #endif
 363
 364 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 365 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 366 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 367 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 368                                 | CSPR_PORT_SIZE_8 \
 369                                 | CSPR_MSEL_GPCM \
 370                                 | CSPR_V)
 371 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 372 #define CONFIG_SYS_CSOR2        0x0
 373 /* CPLD Timing parameters for IFC CS2 */
 374 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 375                                         FTIM0_GPCM_TEADC(0x0e) | \
 376                                         FTIM0_GPCM_TEAHC(0x0e))
 377 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 378                                         FTIM1_GPCM_TRAD(0x1f))
 379 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 380                                         FTIM2_GPCM_TCH(0x8) | \
 381                                         FTIM2_GPCM_TWP(0x1f))
 382 #define CONFIG_SYS_CS2_FTIM3            0x0
 383
 384 /* NAND Flash on IFC */
 385 #define CONFIG_NAND_FSL_IFC
 386 #define CONFIG_SYS_NAND_BASE            0xff800000
 387 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 388
 389 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 390 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 391                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 392                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 393                                 | CSPR_V)
 394 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 395
 396 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 397                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 398                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 399                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 400                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 401                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 402                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 403
 404 #define CONFIG_SYS_NAND_ONFI_DETECTION
 405
 406 /* ONFI NAND Flash mode0 Timing Params */
 407 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 408                                         FTIM0_NAND_TWP(0x18)   | \
 409                                         FTIM0_NAND_TWCHT(0x07) | \
 410                                         FTIM0_NAND_TWH(0x0a))
 411 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 412                                         FTIM1_NAND_TWBE(0x39)  | \
 413                                         FTIM1_NAND_TRR(0x0e)   | \
 414                                         FTIM1_NAND_TRP(0x18))
 415 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 416                                         FTIM2_NAND_TREH(0x0a) | \
 417                                         FTIM2_NAND_TWHRE(0x1e))
 418 #define CONFIG_SYS_NAND_FTIM3           0x0
 419
 420 #define CONFIG_SYS_NAND_DDR_LAW         11
 421 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 422 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 423 #define CONFIG_CMD_NAND
 424
 425 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 426
 427 #if defined(CONFIG_NAND)
 428 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 429 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 430 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 431 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 432 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 433 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 434 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 435 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 436 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 437 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 438 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 439 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 440 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 441 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 442 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 443 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 444 #else
 445 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 446 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 447 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 448 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 449 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 450 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 451 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 452 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 453 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 454 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 455 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 456 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 457 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 458 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 459 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 460 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 461 #endif
 462
 463 #ifdef CONFIG_SPL_BUILD
 464 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 465 #else
 466 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 467 #endif
 468
 469 #if defined(CONFIG_RAMBOOT_PBL)
 470 #define CONFIG_SYS_RAMBOOT
 471 #endif
 472
 473 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 474 #if defined(CONFIG_NAND)
 475 #define CONFIG_A008044_WORKAROUND
 476 #endif
 477 #endif
 478
 479 #define CONFIG_BOARD_EARLY_INIT_R
 480 #define CONFIG_MISC_INIT_R
 481
 482 #define CONFIG_HWCONFIG
 483
 484 /* define to use L1 as initial stack */
 485 #define CONFIG_L1_INIT_RAM
 486 #define CONFIG_SYS_INIT_RAM_LOCK
 487 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 488 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 489 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 490 /* The assembler doesn't like typecast */
 491 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 492         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 493           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 494 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 495
 496 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 497                                         GENERATED_GBL_DATA_SIZE)
 498 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 499
 500 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 501 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 502
 503 /* Serial Port - controlled on board with jumper J8
 504  * open - index 2
 505  * shorted - index 1
 506  */
 507 #define CONFIG_CONS_INDEX       1
 508 #define CONFIG_SYS_NS16550_SERIAL
 509 #define CONFIG_SYS_NS16550_REG_SIZE     1
 510 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 511
 512 #define CONFIG_SYS_BAUDRATE_TABLE       \
 513         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 514
 515 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 516 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 517 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 518 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 519
 520 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB)
 521 /* Video */
 522 #define CONFIG_FSL_DIU_FB
 523
 524 #ifdef CONFIG_FSL_DIU_FB
 525 #define CONFIG_FSL_DIU_CH7301
 526 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 527 #define CONFIG_CMD_BMP
 528 #define CONFIG_CFB_CONSOLE
 529 #define CONFIG_CFB_CONSOLE_ANSI
 530 #define CONFIG_VIDEO_SW_CURSOR
 531 #define CONFIG_VGA_AS_SINGLE_DEVICE
 532 #define CONFIG_VIDEO_LOGO
 533 #define CONFIG_VIDEO_BMP_LOGO
 534 #endif
 535 #endif
 536
 537 /* I2C */
 538 #define CONFIG_SYS_I2C
 539 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 540 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 541 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 542 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 543 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 544 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 545 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 546 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 547 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 548 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 549 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 550 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 551 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 552
 553 /* I2C bus multiplexer */
 554 #define I2C_MUX_PCA_ADDR                0x70
 555 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 556 #define I2C_MUX_CH_DEFAULT      0x8
 557 #endif
 558
 559 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T104XD4RDB)
 560 /* LDI/DVI Encoder for display */
 561 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 562 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 563
 564 /*
 565  * RTC configuration
 566  */
 567 #define RTC
 568 #define CONFIG_RTC_DS1337               1
 569 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 570
 571 /*DVI encoder*/
 572 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 573 #endif
 574
 575 /*
 576  * eSPI - Enhanced SPI
 577  */
 578 #define CONFIG_SPI_FLASH_BAR
 579 #define CONFIG_SF_DEFAULT_SPEED         10000000
 580 #define CONFIG_SF_DEFAULT_MODE          0
 581 #define CONFIG_ENV_SPI_BUS              0
 582 #define CONFIG_ENV_SPI_CS               0
 583 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 584 #define CONFIG_ENV_SPI_MODE             0
 585
 586 /*
 587  * General PCI
 588  * Memory space is mapped 1-1, but I/O space must start from 0.
 589  */
 590
 591 #ifdef CONFIG_PCI
 592 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 593 #ifdef CONFIG_PCIE1
 594 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 595 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 596 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 597 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 598 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 599 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 600 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 601 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 602 #endif
 603
 604 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 605 #ifdef CONFIG_PCIE2
 606 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 607 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 608 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 609 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 610 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 611 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 612 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 613 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 614 #endif
 615
 616 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 617 #ifdef CONFIG_PCIE3
 618 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 619 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 620 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 621 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 622 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 623 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 624 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 625 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 626 #endif
 627
 628 /* controller 4, Base address 203000 */
 629 #ifdef CONFIG_PCIE4
 630 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 631 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 632 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 633 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 634 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 635 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 636 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 637 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 638 #endif
 639
 640 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 641
 642 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 643 #define CONFIG_DOS_PARTITION
 644 #endif  /* CONFIG_PCI */
 645
 646 /* SATA */
 647 #define CONFIG_FSL_SATA_V2
 648 #ifdef CONFIG_FSL_SATA_V2
 649 #define CONFIG_LIBATA
 650 #define CONFIG_FSL_SATA
 651
 652 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 653 #define CONFIG_SATA1
 654 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 655 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 656
 657 #define CONFIG_LBA48
 658 #define CONFIG_CMD_SATA
 659 #define CONFIG_DOS_PARTITION
 660 #endif
 661
 662 /*
 663 * USB
 664 */
 665 #define CONFIG_HAS_FSL_DR_USB
 666
 667 #ifdef CONFIG_HAS_FSL_DR_USB
 668 #define CONFIG_USB_EHCI
 669
 670 #ifdef CONFIG_USB_EHCI
 671 #define CONFIG_USB_EHCI_FSL
 672 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 673 #endif
 674 #endif
 675
 676 #define CONFIG_MMC
 677
 678 #ifdef CONFIG_MMC
 679 #define CONFIG_FSL_ESDHC
 680 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 681 #define CONFIG_GENERIC_MMC
 682 #define CONFIG_DOS_PARTITION
 683 #endif
 684
 685 /* Qman/Bman */
 686 #ifndef CONFIG_NOBQFMAN
 687 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 688 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 689 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 690 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 691 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 692 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 693 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 694 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 695 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 696 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 697                                         CONFIG_SYS_BMAN_CENA_SIZE)
 698 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 699 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 700 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 701 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 702 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 703 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 704 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 705 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 706 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 707 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 708 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 709                                         CONFIG_SYS_QMAN_CENA_SIZE)
 710 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 711 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 712
 713 #define CONFIG_SYS_DPAA_FMAN
 714 #define CONFIG_SYS_DPAA_PME
 715
 716 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 717 #define CONFIG_QE
 718 #define CONFIG_U_QE
 719 #endif
 720
 721 /* Default address of microcode for the Linux Fman driver */
 722 #if defined(CONFIG_SPIFLASH)
 723 /*
 724  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 725  * env, so we got 0x110000.
 726  */
 727 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 728 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 729 #elif defined(CONFIG_SDCARD)
 730 /*
 731  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 732  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 733  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 734  */
 735 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 736 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 737 #elif defined(CONFIG_NAND)
 738 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 739 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 740 #else
 741 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 742 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 743 #endif
 744
 745 #if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 746 #if defined(CONFIG_SPIFLASH)
 747 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 748 #elif defined(CONFIG_SDCARD)
 749 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 750 #elif defined(CONFIG_NAND)
 751 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 752 #else
 753 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 754 #endif
 755 #endif
 756
 757 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 758 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 759 #endif /* CONFIG_NOBQFMAN */
 760
 761 #ifdef CONFIG_SYS_DPAA_FMAN
 762 #define CONFIG_FMAN_ENET
 763 #define CONFIG_PHY_VITESSE
 764 #define CONFIG_PHY_REALTEK
 765 #endif
 766
 767 #ifdef CONFIG_FMAN_ENET
 768 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 769 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 770 #elif defined(CONFIG_T1040D4RDB)
 771 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 772 #elif defined(CONFIG_T1042D4RDB)
 773 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 774 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 775 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 776 #endif
 777
 778 #ifdef CONFIG_T104XD4RDB
 779 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 780 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 781 #else
 782 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 783 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 784 #endif
 785
 786 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 787 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
 788 #define CONFIG_VSC9953
 789 #define CONFIG_CMD_ETHSW
 790 #ifdef CONFIG_T1040RDB
 791 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 792 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 793 #else
 794 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 795 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 796 #endif
 797 #endif
 798
 799 #define CONFIG_MII              /* MII PHY management */
 800 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 801 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 802 #endif
 803
 804 /*
 805  * Environment
 806  */
 807 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 808 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 809
 810 /*
 811  * Command line configuration.
 812  */
 813 #ifdef CONFIG_T1042RDB_PI
 814 #define CONFIG_CMD_DATE
 815 #endif
 816 #define CONFIG_CMD_ERRATA
 817 #define CONFIG_CMD_IRQ
 818 #define CONFIG_CMD_REGINFO
 819
 820 #ifdef CONFIG_PCI
 821 #define CONFIG_CMD_PCI
 822 #endif
 823
 824 /* Hash command with SHA acceleration supported in hardware */
 825 #ifdef CONFIG_FSL_CAAM
 826 #define CONFIG_CMD_HASH
 827 #define CONFIG_SHA_HW_ACCEL
 828 #endif
 829
 830 /*
 831  * Miscellaneous configurable options
 832  */
 833 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 834 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 835 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 836 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 837 #ifdef CONFIG_CMD_KGDB
 838 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 839 #else
 840 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 841 #endif
 842 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 843 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 844 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 845
 846 /*
 847  * For booting Linux, the board info and command line data
 848  * have to be in the first 64 MB of memory, since this is
 849  * the maximum mapped by the Linux kernel during initialization.
 850  */
 851 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 852 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 853
 854 #ifdef CONFIG_CMD_KGDB
 855 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 856 #endif
 857
 858 /*
 859  * Dynamic MTD Partition support with mtdparts
 860  */
 861 #ifndef CONFIG_SYS_NO_FLASH
 862 #define CONFIG_MTD_DEVICE
 863 #define CONFIG_MTD_PARTITIONS
 864 #define CONFIG_CMD_MTDPARTS
 865 #define CONFIG_FLASH_CFI_MTD
 866 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 867                         "spi0=spife110000.0"
 868 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 869                                 "128k(dtb),96m(fs),-(user);"\
 870                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 871                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 872                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 873 #endif
 874
 875 /*
 876  * Environment Configuration
 877  */
 878 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 879 #define CONFIG_BOOTFILE         "uImage"
 880 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 881
 882 /* default location for tftp and bootm */
 883 #define CONFIG_LOADADDR         1000000
 884
 885
 886 #define CONFIG_BAUDRATE 115200
 887
 888 #define __USB_PHY_TYPE  utmi
 889 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 890
 891 #ifdef CONFIG_T1040RDB
 892 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 893 #elif defined(CONFIG_T1042RDB_PI)
 894 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 895 #elif defined(CONFIG_T1042RDB)
 896 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 897 #elif defined(CONFIG_T1040D4RDB)
 898 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 899 #elif defined(CONFIG_T1042D4RDB)
 900 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 901 #endif
 902
 903 #ifdef CONFIG_FSL_DIU_FB
 904 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 905 #else
 906 #define DIU_ENVIRONMENT
 907 #endif
 908
 909 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 910         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 911         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 912         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 913         "netdev=eth0\0"                                         \
 914         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 915         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 916         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 917         "tftpflash=tftpboot $loadaddr $uboot && "               \
 918         "protect off $ubootaddr +$filesize && "                 \
 919         "erase $ubootaddr +$filesize && "                       \
 920         "cp.b $loadaddr $ubootaddr $filesize && "               \
 921         "protect on $ubootaddr +$filesize && "                  \
 922         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 923         "consoledev=ttyS0\0"                                    \
 924         "ramdiskaddr=2000000\0"                                 \
 925         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 926         "fdtaddr=1e00000\0"                                     \
 927         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 928         "bdev=sda3\0"
 929
 930 #define CONFIG_LINUX                       \
 931         "setenv bootargs root=/dev/ram rw "            \
 932         "console=$consoledev,$baudrate $othbootargs;"  \
 933         "setenv ramdiskaddr 0x02000000;"               \
 934         "setenv fdtaddr 0x00c00000;"                   \
 935         "setenv loadaddr 0x1000000;"                   \
 936         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 937
 938 #define CONFIG_HDBOOT                                   \
 939         "setenv bootargs root=/dev/$bdev rw "           \
 940         "console=$consoledev,$baudrate $othbootargs;"   \
 941         "tftp $loadaddr $bootfile;"                     \
 942         "tftp $fdtaddr $fdtfile;"                       \
 943         "bootm $loadaddr - $fdtaddr"
 944
 945 #define CONFIG_NFSBOOTCOMMAND                   \
 946         "setenv bootargs root=/dev/nfs rw "     \
 947         "nfsroot=$serverip:$rootpath "          \
 948         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 949         "console=$consoledev,$baudrate $othbootargs;"   \
 950         "tftp $loadaddr $bootfile;"             \
 951         "tftp $fdtaddr $fdtfile;"               \
 952         "bootm $loadaddr - $fdtaddr"
 953
 954 #define CONFIG_RAMBOOTCOMMAND                           \
 955         "setenv bootargs root=/dev/ram rw "             \
 956         "console=$consoledev,$baudrate $othbootargs;"   \
 957         "tftp $ramdiskaddr $ramdiskfile;"               \
 958         "tftp $loadaddr $bootfile;"                     \
 959         "tftp $fdtaddr $fdtfile;"                       \
 960         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 961
 962 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 963
 964 #include <asm/fsl_secure_boot.h>
 965
 966 #endif  /* __CONFIG_H */