include/configs/T104xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <linux/stringify.h>
  11
  12 /*
  13  * T104x RDB board configuration file
  14  */
  15 #include <asm/config_mpc85xx.h>
  16
  17 #ifdef CONFIG_RAMBOOT_PBL
  18
  19 #ifndef CONFIG_NXP_ESBC
  20 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
  21 #else
  22 #define CONFIG_SYS_FSL_PBL_PBI \
  23                 $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
  24 #endif
  25
  26 #define CONFIG_SPL_FLUSH_IMAGE
  27 #define CONFIG_SPL_PAD_TO               0x40000
  28 #define CONFIG_SPL_MAX_SIZE             0x28000
  29 #ifdef CONFIG_SPL_BUILD
  30 #define CONFIG_SPL_SKIP_RELOCATE
  31 #define CONFIG_SPL_COMMON_INIT_DDR
  32 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  33 #endif
  34 #define RESET_VECTOR_OFFSET             0x27FFC
  35 #define BOOT_PAGE_OFFSET                0x27000
  36
  37 #ifdef CONFIG_MTD_RAW_NAND
  38 #ifdef CONFIG_NXP_ESBC
  39 #define CONFIG_U_BOOT_HDR_SIZE          (16 << 10)
  40 /*
  41  * HDR would be appended at end of image and copied to DDR along
  42  * with U-Boot image.
  43  */
  44 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) + \
  45                                          CONFIG_U_BOOT_HDR_SIZE)
  46 #else
  47 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  48 #endif
  49 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  50 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  51 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  52 #ifdef CONFIG_TARGET_T1040RDB
  53 #define CONFIG_SYS_FSL_PBL_RCW \
  54 $(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
  55 #endif
  56 #ifdef CONFIG_TARGET_T1042RDB_PI
  57 #define CONFIG_SYS_FSL_PBL_RCW \
  58 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
  59 #endif
  60 #ifdef CONFIG_TARGET_T1042RDB
  61 #define CONFIG_SYS_FSL_PBL_RCW \
  62 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
  63 #endif
  64 #ifdef CONFIG_TARGET_T1040D4RDB
  65 #define CONFIG_SYS_FSL_PBL_RCW \
  66 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
  67 #endif
  68 #ifdef CONFIG_TARGET_T1042D4RDB
  69 #define CONFIG_SYS_FSL_PBL_RCW \
  70 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
  71 #endif
  72 #endif
  73
  74 #ifdef CONFIG_SPIFLASH
  75 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  76 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  78 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  79 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  80 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  81 #ifndef CONFIG_SPL_BUILD
  82 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  83 #endif
  84 #ifdef CONFIG_TARGET_T1040RDB
  85 #define CONFIG_SYS_FSL_PBL_RCW \
  86 $(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
  87 #endif
  88 #ifdef CONFIG_TARGET_T1042RDB_PI
  89 #define CONFIG_SYS_FSL_PBL_RCW \
  90 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
  91 #endif
  92 #ifdef CONFIG_TARGET_T1042RDB
  93 #define CONFIG_SYS_FSL_PBL_RCW \
  94 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
  95 #endif
  96 #ifdef CONFIG_TARGET_T1040D4RDB
  97 #define CONFIG_SYS_FSL_PBL_RCW \
  98 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
  99 #endif
 100 #ifdef CONFIG_TARGET_T1042D4RDB
 101 #define CONFIG_SYS_FSL_PBL_RCW \
 102 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
 103 #endif
 104 #endif
 105
 106 #ifdef CONFIG_SDCARD
 107 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 108 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 109 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
 110 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
 111 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
 112 #ifndef CONFIG_SPL_BUILD
 113 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 114 #endif
 115 #ifdef CONFIG_TARGET_T1040RDB
 116 #define CONFIG_SYS_FSL_PBL_RCW \
 117 $(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
 118 #endif
 119 #ifdef CONFIG_TARGET_T1042RDB_PI
 120 #define CONFIG_SYS_FSL_PBL_RCW \
 121 $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 122 #endif
 123 #ifdef CONFIG_TARGET_T1042RDB
 124 #define CONFIG_SYS_FSL_PBL_RCW \
 125 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 126 #endif
 127 #ifdef CONFIG_TARGET_T1040D4RDB
 128 #define CONFIG_SYS_FSL_PBL_RCW \
 129 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 130 #endif
 131 #ifdef CONFIG_TARGET_T1042D4RDB
 132 #define CONFIG_SYS_FSL_PBL_RCW \
 133 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 134 #endif
 135 #endif
 136
 137 #endif
 138
 139 /* High Level Configuration Options */
 140 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
 141
 142 /* support deep sleep */
 143 #define CONFIG_DEEP_SLEEP
 144
 145 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 146 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 147 #endif
 148
 149 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
 150 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
 151 #define CONFIG_PCIE1                    /* PCIE controller 1 */
 152 #define CONFIG_PCIE2                    /* PCIE controller 2 */
 153 #define CONFIG_PCIE3                    /* PCIE controller 3 */
 154 #define CONFIG_PCIE4                    /* PCIE controller 4 */
 155
 156 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 157
 158 #if defined(CONFIG_SPIFLASH)
 159 #elif defined(CONFIG_MTD_RAW_NAND)
 160 #ifdef CONFIG_NXP_ESBC
 161 #define CONFIG_RAMBOOT_NAND
 162 #define CONFIG_BOOTSCRIPT_COPY_RAM
 163 #endif
 164 #endif
 165
 166 #define CONFIG_SYS_CLK_FREQ     100000000
 167 #define CONFIG_DDR_CLK_FREQ     66666666
 168
 169 /*
 170  * These can be toggled for performance analysis, otherwise use default.
 171  */
 172 #define CONFIG_SYS_CACHE_STASHING
 173 #define CONFIG_BACKSIDE_L2_CACHE
 174 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 175 #define CONFIG_BTB                      /* toggle branch predition */
 176 #define CONFIG_DDR_ECC
 177 #ifdef CONFIG_DDR_ECC
 178 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 179 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 180 #endif
 181
 182 #define CONFIG_ENABLE_36BIT_PHYS
 183
 184 /*
 185  *  Config the L3 Cache as L3 SRAM
 186  */
 187 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 188 /*
 189  * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
 190  * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
 191  * (CONFIG_SYS_INIT_L3_VADDR) will be different.
 192  */
 193 #define CONFIG_SYS_INIT_L3_VADDR        0xFFFC0000
 194 #define CONFIG_SYS_L3_SIZE              256 << 10
 195 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 196 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
 197 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 198 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 199 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 200
 201 #define CONFIG_SYS_DCSRBAR              0xf0000000
 202 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 203
 204 /*
 205  * DDR Setup
 206  */
 207 #define CONFIG_VERY_BIG_RAM
 208 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 209 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 210
 211 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 212 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 213
 214 #define CONFIG_DDR_SPD
 215
 216 #define CONFIG_SYS_SPD_BUS_NUM  0
 217 #define SPD_EEPROM_ADDRESS      0x51
 218
 219 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 220
 221 /*
 222  * IFC Definitions
 223  */
 224 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 225 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 226
 227 #define CONFIG_SYS_NOR_CSPR_EXT (0xf)
 228 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
 229                                 CSPR_PORT_SIZE_16 | \
 230                                 CSPR_MSEL_NOR | \
 231                                 CSPR_V)
 232 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 233
 234 /*
 235  * TDM Definition
 236  */
 237 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 238
 239 /* NOR Flash Timing Params */
 240 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 241 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 242                                 FTIM0_NOR_TEADC(0x5) | \
 243                                 FTIM0_NOR_TEAHC(0x5))
 244 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 245                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 246                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 247 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 248                                 FTIM2_NOR_TCH(0x4) | \
 249                                 FTIM2_NOR_TWPH(0x0E) | \
 250                                 FTIM2_NOR_TWP(0x1c))
 251 #define CONFIG_SYS_NOR_FTIM3    0x0
 252
 253 #define CONFIG_SYS_FLASH_QUIET_TEST
 254 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 255
 256 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 257 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 258 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 259 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 260
 261 #define CONFIG_SYS_FLASH_EMPTY_INFO
 262 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 263
 264 /* CPLD on IFC */
 265 #define CPLD_LBMAP_MASK                 0x3F
 266 #define CPLD_BANK_SEL_MASK              0x07
 267 #define CPLD_BANK_OVERRIDE              0x40
 268 #define CPLD_LBMAP_ALTBANK              0x44 /* BANK OR | BANK 4 */
 269 #define CPLD_LBMAP_DFLTBANK             0x40 /* BANK OR | BANK0 */
 270 #define CPLD_LBMAP_RESET                0xFF
 271 #define CPLD_LBMAP_SHIFT                0x03
 272
 273 #if defined(CONFIG_TARGET_T1042RDB_PI)
 274 #define CPLD_DIU_SEL_DFP                0x80
 275 #elif defined(CONFIG_TARGET_T1042D4RDB)
 276 #define CPLD_DIU_SEL_DFP                0xc0
 277 #endif
 278
 279 #if defined(CONFIG_TARGET_T1040D4RDB)
 280 #define CPLD_INT_MASK_ALL               0xFF
 281 #define CPLD_INT_MASK_THERM             0x80
 282 #define CPLD_INT_MASK_DVI_DFP           0x40
 283 #define CPLD_INT_MASK_QSGMII1           0x20
 284 #define CPLD_INT_MASK_QSGMII2           0x10
 285 #define CPLD_INT_MASK_SGMI1             0x08
 286 #define CPLD_INT_MASK_SGMI2             0x04
 287 #define CPLD_INT_MASK_TDMR1             0x02
 288 #define CPLD_INT_MASK_TDMR2             0x01
 289 #endif
 290
 291 #define CONFIG_SYS_CPLD_BASE    0xffdf0000
 292 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 293 #define CONFIG_SYS_CSPR2_EXT    (0xf)
 294 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 295                                 | CSPR_PORT_SIZE_8 \
 296                                 | CSPR_MSEL_GPCM \
 297                                 | CSPR_V)
 298 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 299 #define CONFIG_SYS_CSOR2        0x0
 300 /* CPLD Timing parameters for IFC CS2 */
 301 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 302                                         FTIM0_GPCM_TEADC(0x0e) | \
 303                                         FTIM0_GPCM_TEAHC(0x0e))
 304 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 305                                         FTIM1_GPCM_TRAD(0x1f))
 306 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 307                                         FTIM2_GPCM_TCH(0x8) | \
 308                                         FTIM2_GPCM_TWP(0x1f))
 309 #define CONFIG_SYS_CS2_FTIM3            0x0
 310
 311 /* NAND Flash on IFC */
 312 #define CONFIG_NAND_FSL_IFC
 313 #define CONFIG_SYS_NAND_BASE            0xff800000
 314 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 315
 316 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 317 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 318                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 319                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 320                                 | CSPR_V)
 321 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 322
 323 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 324                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 325                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 326                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 327                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 328                                 | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
 329                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 330
 331 #define CONFIG_SYS_NAND_ONFI_DETECTION
 332
 333 /* ONFI NAND Flash mode0 Timing Params */
 334 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 335                                         FTIM0_NAND_TWP(0x18)   | \
 336                                         FTIM0_NAND_TWCHT(0x07) | \
 337                                         FTIM0_NAND_TWH(0x0a))
 338 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 339                                         FTIM1_NAND_TWBE(0x39)  | \
 340                                         FTIM1_NAND_TRR(0x0e)   | \
 341                                         FTIM1_NAND_TRP(0x18))
 342 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 343                                         FTIM2_NAND_TREH(0x0a) | \
 344                                         FTIM2_NAND_TWHRE(0x1e))
 345 #define CONFIG_SYS_NAND_FTIM3           0x0
 346
 347 #define CONFIG_SYS_NAND_DDR_LAW         11
 348 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 349 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 350
 351 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 352
 353 #if defined(CONFIG_MTD_RAW_NAND)
 354 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 355 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 356 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 357 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 358 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 359 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 360 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 361 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 362 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR_CSPR_EXT
 363 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 364 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 365 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 366 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 367 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 368 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 369 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 370 #else
 371 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR_CSPR_EXT
 372 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 373 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 374 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 375 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 376 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 377 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 378 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 379 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 380 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 381 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 382 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 383 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 384 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 385 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 386 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 387 #endif
 388
 389 #ifdef CONFIG_SPL_BUILD
 390 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 391 #else
 392 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 393 #endif
 394
 395 #if defined(CONFIG_RAMBOOT_PBL)
 396 #define CONFIG_SYS_RAMBOOT
 397 #endif
 398
 399 #ifdef CONFIG_SYS_FSL_ERRATUM_A008044
 400 #if defined(CONFIG_MTD_RAW_NAND)
 401 #define CONFIG_A008044_WORKAROUND
 402 #endif
 403 #endif
 404
 405 #define CONFIG_HWCONFIG
 406
 407 /* define to use L1 as initial stack */
 408 #define CONFIG_L1_INIT_RAM
 409 #define CONFIG_SYS_INIT_RAM_LOCK
 410 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 411 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 412 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 413 /* The assembler doesn't like typecast */
 414 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 415         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 416           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 417 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 418
 419 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 420                                         GENERATED_GBL_DATA_SIZE)
 421 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 422
 423 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 424 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 425
 426 /* Serial Port - controlled on board with jumper J8
 427  * open - index 2
 428  * shorted - index 1
 429  */
 430 #define CONFIG_SYS_NS16550_SERIAL
 431 #define CONFIG_SYS_NS16550_REG_SIZE     1
 432 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 433
 434 #define CONFIG_SYS_BAUDRATE_TABLE       \
 435         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 436
 437 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 438 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 439 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 440 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 441
 442 #if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
 443 /* Video */
 444 #define CONFIG_FSL_DIU_FB
 445
 446 #ifdef CONFIG_FSL_DIU_FB
 447 #define CONFIG_FSL_DIU_CH7301
 448 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 449 #define CONFIG_VIDEO_LOGO
 450 #define CONFIG_VIDEO_BMP_LOGO
 451 #endif
 452 #endif
 453
 454 /* I2C */
 455 #if !CONFIG_IS_ENABLED(DM_I2C)
 456 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 457 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 458 #define CONFIG_SYS_FSL_I2C3_SPEED       400000
 459 #define CONFIG_SYS_FSL_I2C4_SPEED       400000
 460 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 461 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 462 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 463 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 464 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 465 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 466 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 467 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 468 #else
 469 #define CONFIG_I2C_SET_DEFAULT_BUS_NUM
 470 #define CONFIG_I2C_DEFAULT_BUS_NUMBER   0
 471 #endif
 472
 473 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 474 /* I2C bus multiplexer */
 475 #define I2C_MUX_PCA_ADDR                0x70
 476 #define I2C_MUX_CH_DEFAULT      0x8
 477
 478 #if defined(CONFIG_TARGET_T1042RDB_PI)  || \
 479         defined(CONFIG_TARGET_T1040D4RDB)       || \
 480         defined(CONFIG_TARGET_T1042D4RDB)
 481 /* LDI/DVI Encoder for display */
 482 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 483 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 484 #define CONFIG_SYS_I2C_DVI_BUS_NUM      0
 485
 486 /*
 487  * RTC configuration
 488  */
 489 #define RTC
 490 #define CONFIG_RTC_DS1337               1
 491 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 492
 493 /*DVI encoder*/
 494 #define CONFIG_HDMI_ENCODER_I2C_ADDR  0x75
 495 #endif
 496
 497 /*
 498  * eSPI - Enhanced SPI
 499  */
 500
 501 /*
 502  * General PCI
 503  * Memory space is mapped 1-1, but I/O space must start from 0.
 504  */
 505
 506 #ifdef CONFIG_PCI
 507 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 508 #ifdef CONFIG_PCIE1
 509 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 510 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 511 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 512 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 513 #endif
 514
 515 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 516 #ifdef CONFIG_PCIE2
 517 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 518 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 519 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 520 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 521 #endif
 522
 523 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 524 #ifdef CONFIG_PCIE3
 525 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 526 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 527 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 528 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 529 #endif
 530
 531 /* controller 4, Base address 203000 */
 532 #ifdef CONFIG_PCIE4
 533 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 534 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 535 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 536 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 537 #endif
 538
 539 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 540 #endif  /* CONFIG_PCI */
 541
 542 /* SATA */
 543 #define CONFIG_FSL_SATA_V2
 544 #ifdef CONFIG_FSL_SATA_V2
 545 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 546 #define CONFIG_SATA1
 547 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 548 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 549
 550 #define CONFIG_LBA48
 551 #endif
 552
 553 /*
 554 * USB
 555 */
 556 #define CONFIG_HAS_FSL_DR_USB
 557
 558 #ifdef CONFIG_HAS_FSL_DR_USB
 559 #ifdef CONFIG_USB_EHCI_HCD
 560 #define CONFIG_USB_EHCI_FSL
 561 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 562 #endif
 563 #endif
 564
 565 #ifdef CONFIG_MMC
 566 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 567 #endif
 568
 569 /* Qman/Bman */
 570 #ifndef CONFIG_NOBQFMAN
 571 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 572 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 573 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 574 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 575 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 576 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 577 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 578 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 579 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 580                                         CONFIG_SYS_BMAN_CENA_SIZE)
 581 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 582 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 583 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 584 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 585 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 586 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 587 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 588 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 589 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 590 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 591 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 592                                         CONFIG_SYS_QMAN_CENA_SIZE)
 593 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 594 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 595
 596 #define CONFIG_SYS_DPAA_FMAN
 597 #define CONFIG_SYS_DPAA_PME
 598
 599 #define CONFIG_U_QE
 600
 601 /* Default address of microcode for the Linux Fman driver */
 602 #if defined(CONFIG_SPIFLASH)
 603 /*
 604  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 605  * env, so we got 0x110000.
 606  */
 607 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 608 #elif defined(CONFIG_SDCARD)
 609 /*
 610  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 611  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 612  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
 613  */
 614 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
 615 #elif defined(CONFIG_MTD_RAW_NAND)
 616 #define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
 617 #else
 618 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 619 #endif
 620
 621 #if defined(CONFIG_SPIFLASH)
 622 #define CONFIG_SYS_QE_FW_ADDR           0x130000
 623 #elif defined(CONFIG_SDCARD)
 624 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 625 #elif defined(CONFIG_MTD_RAW_NAND)
 626 #define CONFIG_SYS_QE_FW_ADDR           (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 627 #else
 628 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 629 #endif
 630
 631 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 632 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 633 #endif /* CONFIG_NOBQFMAN */
 634
 635 #ifdef CONFIG_FMAN_ENET
 636 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
 637 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 638 #elif defined(CONFIG_TARGET_T1040D4RDB)
 639 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 640 #elif defined(CONFIG_TARGET_T1042D4RDB)
 641 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 642 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 643 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 644 #endif
 645
 646 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 647 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 648 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 649 #else
 650 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
 651 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x02
 652 #endif
 653
 654 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 655 #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 656 #define CONFIG_VSC9953
 657 #ifdef CONFIG_TARGET_T1040RDB
 658 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x04
 659 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x08
 660 #else
 661 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x08
 662 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x0c
 663 #endif
 664 #endif
 665
 666 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 667 #endif
 668
 669 /*
 670  * Environment
 671  */
 672 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 673 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 674
 675 /*
 676  * Miscellaneous configurable options
 677  */
 678 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 679
 680 /*
 681  * For booting Linux, the board info and command line data
 682  * have to be in the first 64 MB of memory, since this is
 683  * the maximum mapped by the Linux kernel during initialization.
 684  */
 685 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 686 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 687
 688 #ifdef CONFIG_CMD_KGDB
 689 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 690 #endif
 691
 692 /*
 693  * Dynamic MTD Partition support with mtdparts
 694  */
 695
 696 /*
 697  * Environment Configuration
 698  */
 699 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 700 #define CONFIG_BOOTFILE         "uImage"
 701 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 702
 703 /* default location for tftp and bootm */
 704 #define CONFIG_LOADADDR         1000000
 705
 706 #define __USB_PHY_TYPE  utmi
 707 #define RAMDISKFILE     "t104xrdb/ramdisk.uboot"
 708
 709 #ifdef CONFIG_TARGET_T1040RDB
 710 #define FDTFILE         "t1040rdb/t1040rdb.dtb"
 711 #elif defined(CONFIG_TARGET_T1042RDB_PI)
 712 #define FDTFILE         "t1042rdb_pi/t1042rdb_pi.dtb"
 713 #elif defined(CONFIG_TARGET_T1042RDB)
 714 #define FDTFILE         "t1042rdb/t1042rdb.dtb"
 715 #elif defined(CONFIG_TARGET_T1040D4RDB)
 716 #define FDTFILE         "t1042rdb/t1040d4rdb.dtb"
 717 #elif defined(CONFIG_TARGET_T1042D4RDB)
 718 #define FDTFILE         "t1042rdb/t1042d4rdb.dtb"
 719 #endif
 720
 721 #ifdef CONFIG_FSL_DIU_FB
 722 #define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
 723 #else
 724 #define DIU_ENVIRONMENT
 725 #endif
 726
 727 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 728         "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;"                  \
 729         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
 730         "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 731         "netdev=eth0\0"                                         \
 732         "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
 733         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 734         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 735         "tftpflash=tftpboot $loadaddr $uboot && "               \
 736         "protect off $ubootaddr +$filesize && "                 \
 737         "erase $ubootaddr +$filesize && "                       \
 738         "cp.b $loadaddr $ubootaddr $filesize && "               \
 739         "protect on $ubootaddr +$filesize && "                  \
 740         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 741         "consoledev=ttyS0\0"                                    \
 742         "ramdiskaddr=2000000\0"                                 \
 743         "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
 744         "fdtaddr=1e00000\0"                                     \
 745         "fdtfile=" __stringify(FDTFILE) "\0"                    \
 746         "bdev=sda3\0"
 747
 748 #define CONFIG_LINUX                       \
 749         "setenv bootargs root=/dev/ram rw "            \
 750         "console=$consoledev,$baudrate $othbootargs;"  \
 751         "setenv ramdiskaddr 0x02000000;"               \
 752         "setenv fdtaddr 0x00c00000;"                   \
 753         "setenv loadaddr 0x1000000;"                   \
 754         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 755
 756 #define CONFIG_HDBOOT                                   \
 757         "setenv bootargs root=/dev/$bdev rw "           \
 758         "console=$consoledev,$baudrate $othbootargs;"   \
 759         "tftp $loadaddr $bootfile;"                     \
 760         "tftp $fdtaddr $fdtfile;"                       \
 761         "bootm $loadaddr - $fdtaddr"
 762
 763 #define CONFIG_NFSBOOTCOMMAND                   \
 764         "setenv bootargs root=/dev/nfs rw "     \
 765         "nfsroot=$serverip:$rootpath "          \
 766         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 767         "console=$consoledev,$baudrate $othbootargs;"   \
 768         "tftp $loadaddr $bootfile;"             \
 769         "tftp $fdtaddr $fdtfile;"               \
 770         "bootm $loadaddr - $fdtaddr"
 771
 772 #define CONFIG_RAMBOOTCOMMAND                           \
 773         "setenv bootargs root=/dev/ram rw "             \
 774         "console=$consoledev,$baudrate $othbootargs;"   \
 775         "tftp $ramdiskaddr $ramdiskfile;"               \
 776         "tftp $loadaddr $bootfile;"                     \
 777         "tftp $fdtaddr $fdtfile;"                       \
 778         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 779
 780 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 781
 782 #include <asm/fsl_secure_boot.h>
 783
 784 #endif  /* __CONFIG_H */