include/configs/T1040QDS.h

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1040 QDS board configuration file
  28  */
  29
  30 #ifdef CONFIG_RAMBOOT_PBL
  31 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  32 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg
  34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  39
  40 /* support deep sleep */
  41 #define CONFIG_DEEP_SLEEP
  42
  43 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  44 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  45 #endif
  46
  47 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  48 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  49 #define CONFIG_PCI_INDIRECT_BRIDGE
  50 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  51 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  52 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  53 #define CONFIG_PCIE4                    /* PCIE controller 4 */
  54
  55 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  56 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  57
  58 #define CONFIG_ENV_OVERWRITE
  59
  60 #ifndef CONFIG_MTD_NOR_FLASH
  61 #else
  62 #define CONFIG_FLASH_CFI_DRIVER
  63 #define CONFIG_SYS_FLASH_CFI
  64 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  65 #endif
  66
  67 #ifdef CONFIG_MTD_NOR_FLASH
  68 #if defined(CONFIG_SPIFLASH)
  69 #define CONFIG_SYS_EXTRA_ENV_RELOC
  70 #define CONFIG_ENV_SPI_BUS              0
  71 #define CONFIG_ENV_SPI_CS               0
  72 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  73 #define CONFIG_ENV_SPI_MODE             0
  74 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  75 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  76 #define CONFIG_ENV_SECT_SIZE            0x10000
  77 #elif defined(CONFIG_SDCARD)
  78 #define CONFIG_SYS_EXTRA_ENV_RELOC
  79 #define CONFIG_SYS_MMC_ENV_DEV          0
  80 #define CONFIG_ENV_SIZE                 0x2000
  81 #define CONFIG_ENV_OFFSET               (512 * 1658)
  82 #elif defined(CONFIG_NAND)
  83 #define CONFIG_SYS_EXTRA_ENV_RELOC
  84 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  85 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  86 #else
  87 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
  88 #define CONFIG_ENV_SIZE         0x2000
  89 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
  90 #endif
  91 #else /* CONFIG_MTD_NOR_FLASH */
  92 #define CONFIG_ENV_SIZE                0x2000
  93 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
  94 #endif
  95
  96 #ifndef __ASSEMBLY__
  97 unsigned long get_board_sys_clk(void);
  98 unsigned long get_board_ddr_clk(void);
  99 #endif
 100
 101 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 102 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 103
 104 /*
 105  * These can be toggled for performance analysis, otherwise use default.
 106  */
 107 #define CONFIG_SYS_CACHE_STASHING
 108 #define CONFIG_BACKSIDE_L2_CACHE
 109 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 110 #define CONFIG_BTB                      /* toggle branch predition */
 111 #define CONFIG_DDR_ECC
 112 #ifdef CONFIG_DDR_ECC
 113 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 114 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 115 #endif
 116
 117 #define CONFIG_ENABLE_36BIT_PHYS
 118
 119 #define CONFIG_ADDR_MAP
 120 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 121
 122 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 123 #define CONFIG_SYS_MEMTEST_END          0x00400000
 124
 125 /*
 126  *  Config the L3 Cache as L3 SRAM
 127  */
 128 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 129
 130 #define CONFIG_SYS_DCSRBAR              0xf0000000
 131 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 132
 133 /* EEPROM */
 134 #define CONFIG_ID_EEPROM
 135 #define CONFIG_SYS_I2C_EEPROM_NXID
 136 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 137 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 138 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 139 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 140 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 141
 142 /*
 143  * DDR Setup
 144  */
 145 #define CONFIG_VERY_BIG_RAM
 146 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 147 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 148
 149 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 150 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 151
 152 #define CONFIG_DDR_SPD
 153 #define CONFIG_FSL_DDR_INTERACTIVE
 154
 155 #define CONFIG_SYS_SPD_BUS_NUM  0
 156 #define SPD_EEPROM_ADDRESS      0x51
 157
 158 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 159
 160 /*
 161  * IFC Definitions
 162  */
 163 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 164 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 165
 166 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 167 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 168                                 + 0x8000000) | \
 169                                 CSPR_PORT_SIZE_16 | \
 170                                 CSPR_MSEL_NOR | \
 171                                 CSPR_V)
 172 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 173 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 174                                 CSPR_PORT_SIZE_16 | \
 175                                 CSPR_MSEL_NOR | \
 176                                 CSPR_V)
 177 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 178
 179 /*
 180  * TDM Definition
 181  */
 182 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 183
 184 /* NOR Flash Timing Params */
 185 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 186 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 187                                 FTIM0_NOR_TEADC(0x5) | \
 188                                 FTIM0_NOR_TEAHC(0x5))
 189 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 190                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 191                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 192 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 193                                 FTIM2_NOR_TCH(0x4) | \
 194                                 FTIM2_NOR_TWPH(0x0E) | \
 195                                 FTIM2_NOR_TWP(0x1c))
 196 #define CONFIG_SYS_NOR_FTIM3    0x0
 197
 198 #define CONFIG_SYS_FLASH_QUIET_TEST
 199 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 200
 201 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 202 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 203 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 204 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 205
 206 #define CONFIG_SYS_FLASH_EMPTY_INFO
 207 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 208                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 209 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 210 #define QIXIS_BASE              0xffdf0000
 211 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 212 #define QIXIS_LBMAP_SWITCH              0x06
 213 #define QIXIS_LBMAP_MASK                0x0f
 214 #define QIXIS_LBMAP_SHIFT               0
 215 #define QIXIS_LBMAP_DFLTBANK            0x00
 216 #define QIXIS_LBMAP_ALTBANK             0x04
 217 #define QIXIS_RST_CTL_RESET             0x31
 218 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 219 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 220 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 221 #define QIXIS_RST_FORCE_MEM             0x01
 222
 223 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 224 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 225                                 | CSPR_PORT_SIZE_8 \
 226                                 | CSPR_MSEL_GPCM \
 227                                 | CSPR_V)
 228 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 229 #define CONFIG_SYS_CSOR3        0x0
 230 /* QIXIS Timing parameters for IFC CS3 */
 231 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 232                                         FTIM0_GPCM_TEADC(0x0e) | \
 233                                         FTIM0_GPCM_TEAHC(0x0e))
 234 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 235                                         FTIM1_GPCM_TRAD(0x3f))
 236 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 237                                         FTIM2_GPCM_TCH(0x8) | \
 238                                         FTIM2_GPCM_TWP(0x1f))
 239 #define CONFIG_SYS_CS3_FTIM3            0x0
 240
 241 #define CONFIG_NAND_FSL_IFC
 242 #define CONFIG_SYS_NAND_BASE            0xff800000
 243 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 244
 245 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 246 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 247                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 248                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 249                                 | CSPR_V)
 250 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 251
 252 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 253                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 254                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 255                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 256                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 257                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 258                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 259
 260 #define CONFIG_SYS_NAND_ONFI_DETECTION
 261
 262 /* ONFI NAND Flash mode0 Timing Params */
 263 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 264                                         FTIM0_NAND_TWP(0x18)   | \
 265                                         FTIM0_NAND_TWCHT(0x07) | \
 266                                         FTIM0_NAND_TWH(0x0a))
 267 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 268                                         FTIM1_NAND_TWBE(0x39)  | \
 269                                         FTIM1_NAND_TRR(0x0e)   | \
 270                                         FTIM1_NAND_TRP(0x18))
 271 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 272                                         FTIM2_NAND_TREH(0x0a) | \
 273                                         FTIM2_NAND_TWHRE(0x1e))
 274 #define CONFIG_SYS_NAND_FTIM3           0x0
 275
 276 #define CONFIG_SYS_NAND_DDR_LAW         11
 277 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 278 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 279
 280 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 281
 282 #if defined(CONFIG_NAND)
 283 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 284 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 285 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 286 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 287 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 288 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 289 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 290 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 291 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 292 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 293 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 294 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 295 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 296 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 297 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 298 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 299 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 300 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 301 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 302 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 303 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 304 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 305 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 306 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 307 #else
 308 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 309 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 310 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 311 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 312 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 313 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 314 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 315 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 316 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 317 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 318 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 319 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 320 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 321 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 322 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 323 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 324 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 325 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 326 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 327 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 328 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 329 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 330 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 331 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 332 #endif
 333
 334 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 335
 336 #if defined(CONFIG_RAMBOOT_PBL)
 337 #define CONFIG_SYS_RAMBOOT
 338 #endif
 339
 340 #define CONFIG_HWCONFIG
 341
 342 /* define to use L1 as initial stack */
 343 #define CONFIG_L1_INIT_RAM
 344 #define CONFIG_SYS_INIT_RAM_LOCK
 345 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 346 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 347 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 348 /* The assembler doesn't like typecast */
 349 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 350         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 351           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 352 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 353
 354 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 355                                         GENERATED_GBL_DATA_SIZE)
 356 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 357
 358 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 359 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 360
 361 /* Serial Port - controlled on board with jumper J8
 362  * open - index 2
 363  * shorted - index 1
 364  */
 365 #define CONFIG_SYS_NS16550_SERIAL
 366 #define CONFIG_SYS_NS16550_REG_SIZE     1
 367 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 368
 369 #define CONFIG_SYS_BAUDRATE_TABLE       \
 370         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 371
 372 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 373 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 374 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 375 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 376
 377 /* Video */
 378 #define CONFIG_FSL_DIU_FB
 379 #ifdef CONFIG_FSL_DIU_FB
 380 #define CONFIG_FSL_DIU_CH7301
 381 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 382 #define CONFIG_VIDEO_LOGO
 383 #define CONFIG_VIDEO_BMP_LOGO
 384 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 385 /*
 386  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 387  * disable empty flash sector detection, which is I/O-intensive.
 388  */
 389 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 390 #endif
 391
 392 /* I2C */
 393 #define CONFIG_SYS_I2C
 394 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 395 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 396 #define CONFIG_SYS_FSL_I2C2_SPEED       50000
 397 #define CONFIG_SYS_FSL_I2C3_SPEED       50000
 398 #define CONFIG_SYS_FSL_I2C4_SPEED       50000
 399 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 400 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 401 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 402 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 403 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 404 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 405 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 406 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 407
 408 #define I2C_MUX_PCA_ADDR                0x77
 409 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 410
 411 /* I2C bus multiplexer */
 412 #define I2C_MUX_CH_DEFAULT      0x8
 413 #define I2C_MUX_CH_DIU          0xC
 414
 415 /* LDI/DVI Encoder for display */
 416 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 417 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 418
 419 /*
 420  * RTC configuration
 421  */
 422 #define RTC
 423 #define CONFIG_RTC_DS3231               1
 424 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 425
 426 /*
 427  * eSPI - Enhanced SPI
 428  */
 429 #define CONFIG_SF_DEFAULT_SPEED         10000000
 430 #define CONFIG_SF_DEFAULT_MODE          0
 431
 432 /*
 433  * General PCI
 434  * Memory space is mapped 1-1, but I/O space must start from 0.
 435  */
 436
 437 #ifdef CONFIG_PCI
 438 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 439 #ifdef CONFIG_PCIE1
 440 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 441 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 442 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 443 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 444 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 445 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 446 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 447 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 448 #endif
 449
 450 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 451 #ifdef CONFIG_PCIE2
 452 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 453 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 454 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 455 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 456 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 457 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 458 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 459 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 460 #endif
 461
 462 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 463 #ifdef CONFIG_PCIE3
 464 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 465 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 466 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 467 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 468 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 469 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 470 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 471 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 472 #endif
 473
 474 /* controller 4, Base address 203000 */
 475 #ifdef CONFIG_PCIE4
 476 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 477 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 478 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 479 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 480 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 481 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 482 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 483 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 484 #endif
 485
 486 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 487 #endif  /* CONFIG_PCI */
 488
 489 /* SATA */
 490 #define CONFIG_FSL_SATA_V2
 491 #ifdef CONFIG_FSL_SATA_V2
 492 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 493 #define CONFIG_SATA1
 494 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 495 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 496 #define CONFIG_SATA2
 497 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 498 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 499
 500 #define CONFIG_LBA48
 501 #endif
 502
 503 /*
 504 * USB
 505 */
 506 #define CONFIG_HAS_FSL_DR_USB
 507
 508 #ifdef CONFIG_HAS_FSL_DR_USB
 509 #ifdef CONFIG_USB_EHCI_HCD
 510 #define CONFIG_USB_EHCI_FSL
 511 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 512 #endif
 513 #endif
 514
 515 #ifdef CONFIG_MMC
 516 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 517 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 518 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 519 #endif
 520
 521 /* Qman/Bman */
 522 #ifndef CONFIG_NOBQFMAN
 523 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 524 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 525 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 526 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 527 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 528 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 529 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 530 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 531 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 532                                         CONFIG_SYS_BMAN_CENA_SIZE)
 533 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 534 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 535 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 536 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 537 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 538 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 539 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 540 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 541 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 542 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 543 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 544                                         CONFIG_SYS_QMAN_CENA_SIZE)
 545 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 546 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 547
 548 #define CONFIG_SYS_DPAA_FMAN
 549 #define CONFIG_SYS_DPAA_PME
 550
 551 #define CONFIG_QE
 552 #define CONFIG_U_QE
 553 /* Default address of microcode for the Linux Fman driver */
 554 #if defined(CONFIG_SPIFLASH)
 555 /*
 556  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 557  * env, so we got 0x110000.
 558  */
 559 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 560 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 561 #elif defined(CONFIG_SDCARD)
 562 /*
 563  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 564  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 565  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 566  */
 567 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 568 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 569 #elif defined(CONFIG_NAND)
 570 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 571 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 572 #else
 573 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 574 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 575 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 576 #endif
 577 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 578 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 579 #endif /* CONFIG_NOBQFMAN */
 580
 581 #ifdef CONFIG_SYS_DPAA_FMAN
 582 #define CONFIG_FMAN_ENET
 583 #define CONFIG_PHYLIB_10G
 584 #define CONFIG_PHY_VITESSE
 585 #define CONFIG_PHY_REALTEK
 586 #define CONFIG_PHY_TERANETICS
 587 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 588 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 589 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 590 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 591 #endif
 592
 593 #ifdef CONFIG_FMAN_ENET
 594 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x01
 595 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x02
 596
 597 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 598 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 599 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 600 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 601
 602 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 603 #endif
 604
 605 /* Enable VSC9953 L2 Switch driver */
 606 #define CONFIG_VSC9953
 607 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x14
 608 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x18
 609
 610 /*
 611  * Dynamic MTD Partition support with mtdparts
 612  */
 613 #ifdef CONFIG_MTD_NOR_FLASH
 614 #define CONFIG_FLASH_CFI_MTD
 615 #endif
 616
 617 /*
 618  * Environment
 619  */
 620 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 621 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 622
 623 /*
 624  * Miscellaneous configurable options
 625  */
 626 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 627
 628 /*
 629  * For booting Linux, the board info and command line data
 630  * have to be in the first 64 MB of memory, since this is
 631  * the maximum mapped by the Linux kernel during initialization.
 632  */
 633 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 634 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 635
 636 #ifdef CONFIG_CMD_KGDB
 637 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 638 #endif
 639
 640 /*
 641  * Environment Configuration
 642  */
 643 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 644 #define CONFIG_BOOTFILE         "uImage"
 645 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 646
 647 /* default location for tftp and bootm */
 648 #define CONFIG_LOADADDR         1000000
 649
 650 #define __USB_PHY_TYPE  utmi
 651
 652 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 653         "hwconfig=fsl_ddr:bank_intlv=auto;"                     \
 654         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 655         "netdev=eth0\0"                                         \
 656         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 657         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 658         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 659         "tftpflash=tftpboot $loadaddr $uboot && "               \
 660         "protect off $ubootaddr +$filesize && "                 \
 661         "erase $ubootaddr +$filesize && "                       \
 662         "cp.b $loadaddr $ubootaddr $filesize && "               \
 663         "protect on $ubootaddr +$filesize && "                  \
 664         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 665         "consoledev=ttyS0\0"                                    \
 666         "ramdiskaddr=2000000\0"                                 \
 667         "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
 668         "fdtaddr=1e00000\0"                                     \
 669         "fdtfile=t1040qds/t1040qds.dtb\0"                       \
 670         "bdev=sda3\0"
 671
 672 #define CONFIG_LINUX                       \
 673         "setenv bootargs root=/dev/ram rw "            \
 674         "console=$consoledev,$baudrate $othbootargs;"  \
 675         "setenv ramdiskaddr 0x02000000;"               \
 676         "setenv fdtaddr 0x00c00000;"                   \
 677         "setenv loadaddr 0x1000000;"                   \
 678         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 679
 680 #define CONFIG_HDBOOT                                   \
 681         "setenv bootargs root=/dev/$bdev rw "           \
 682         "console=$consoledev,$baudrate $othbootargs;"   \
 683         "tftp $loadaddr $bootfile;"                     \
 684         "tftp $fdtaddr $fdtfile;"                       \
 685         "bootm $loadaddr - $fdtaddr"
 686
 687 #define CONFIG_NFSBOOTCOMMAND                   \
 688         "setenv bootargs root=/dev/nfs rw "     \
 689         "nfsroot=$serverip:$rootpath "          \
 690         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 691         "console=$consoledev,$baudrate $othbootargs;"   \
 692         "tftp $loadaddr $bootfile;"             \
 693         "tftp $fdtaddr $fdtfile;"               \
 694         "bootm $loadaddr - $fdtaddr"
 695
 696 #define CONFIG_RAMBOOTCOMMAND                           \
 697         "setenv bootargs root=/dev/ram rw "             \
 698         "console=$consoledev,$baudrate $othbootargs;"   \
 699         "tftp $ramdiskaddr $ramdiskfile;"               \
 700         "tftp $loadaddr $bootfile;"                     \
 701         "tftp $fdtaddr $fdtfile;"                       \
 702         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 703
 704 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 705
 706 #include <asm/fsl_secure_boot.h>
 707
 708 #endif  /* __CONFIG_H */