include/configs/T1040QDS.h

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1040 QDS board configuration file
  28  */
  29
  30 #ifdef CONFIG_RAMBOOT_PBL
  31 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  32 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg
  34 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg
  35 #endif
  36
  37 /* High Level Configuration Options */
  38 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  39 #define CONFIG_MP                       /* support multiple processors */
  40
  41 /* support deep sleep */
  42 #define CONFIG_DEEP_SLEEP
  43
  44 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  45 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  46 #endif
  47
  48 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  49 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  50 #define CONFIG_PCI_INDIRECT_BRIDGE
  51 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  52 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  53 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  54 #define CONFIG_PCIE4                    /* PCIE controller 4 */
  55
  56 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  57 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  58
  59 #define CONFIG_ENV_OVERWRITE
  60
  61 #ifndef CONFIG_MTD_NOR_FLASH
  62 #else
  63 #define CONFIG_FLASH_CFI_DRIVER
  64 #define CONFIG_SYS_FLASH_CFI
  65 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  66 #endif
  67
  68 #ifdef CONFIG_MTD_NOR_FLASH
  69 #if defined(CONFIG_SPIFLASH)
  70 #define CONFIG_SYS_EXTRA_ENV_RELOC
  71 #define CONFIG_ENV_SPI_BUS              0
  72 #define CONFIG_ENV_SPI_CS               0
  73 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  74 #define CONFIG_ENV_SPI_MODE             0
  75 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  76 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  77 #define CONFIG_ENV_SECT_SIZE            0x10000
  78 #elif defined(CONFIG_SDCARD)
  79 #define CONFIG_SYS_EXTRA_ENV_RELOC
  80 #define CONFIG_SYS_MMC_ENV_DEV          0
  81 #define CONFIG_ENV_SIZE                 0x2000
  82 #define CONFIG_ENV_OFFSET               (512 * 1658)
  83 #elif defined(CONFIG_NAND)
  84 #define CONFIG_SYS_EXTRA_ENV_RELOC
  85 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  86 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  87 #else
  88 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
  89 #define CONFIG_ENV_SIZE         0x2000
  90 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
  91 #endif
  92 #else /* CONFIG_MTD_NOR_FLASH */
  93 #define CONFIG_ENV_SIZE                0x2000
  94 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
  95 #endif
  96
  97 #ifndef __ASSEMBLY__
  98 unsigned long get_board_sys_clk(void);
  99 unsigned long get_board_ddr_clk(void);
 100 #endif
 101
 102 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 103 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 104
 105 /*
 106  * These can be toggled for performance analysis, otherwise use default.
 107  */
 108 #define CONFIG_SYS_CACHE_STASHING
 109 #define CONFIG_BACKSIDE_L2_CACHE
 110 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 111 #define CONFIG_BTB                      /* toggle branch predition */
 112 #define CONFIG_DDR_ECC
 113 #ifdef CONFIG_DDR_ECC
 114 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 115 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 116 #endif
 117
 118 #define CONFIG_ENABLE_36BIT_PHYS
 119
 120 #define CONFIG_ADDR_MAP
 121 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 122
 123 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 124 #define CONFIG_SYS_MEMTEST_END          0x00400000
 125 #define CONFIG_SYS_ALT_MEMTEST
 126
 127 /*
 128  *  Config the L3 Cache as L3 SRAM
 129  */
 130 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 131
 132 #define CONFIG_SYS_DCSRBAR              0xf0000000
 133 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 134
 135 /* EEPROM */
 136 #define CONFIG_ID_EEPROM
 137 #define CONFIG_SYS_I2C_EEPROM_NXID
 138 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 139 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 140 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 141 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 142 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 143
 144 /*
 145  * DDR Setup
 146  */
 147 #define CONFIG_VERY_BIG_RAM
 148 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 149 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 150
 151 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 152 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 153
 154 #define CONFIG_DDR_SPD
 155 #define CONFIG_FSL_DDR_INTERACTIVE
 156
 157 #define CONFIG_SYS_SPD_BUS_NUM  0
 158 #define SPD_EEPROM_ADDRESS      0x51
 159
 160 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 161
 162 /*
 163  * IFC Definitions
 164  */
 165 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 166 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 167
 168 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 169 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 170                                 + 0x8000000) | \
 171                                 CSPR_PORT_SIZE_16 | \
 172                                 CSPR_MSEL_NOR | \
 173                                 CSPR_V)
 174 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 175 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 176                                 CSPR_PORT_SIZE_16 | \
 177                                 CSPR_MSEL_NOR | \
 178                                 CSPR_V)
 179 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 180
 181 /*
 182  * TDM Definition
 183  */
 184 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 185
 186 /* NOR Flash Timing Params */
 187 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 188 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 189                                 FTIM0_NOR_TEADC(0x5) | \
 190                                 FTIM0_NOR_TEAHC(0x5))
 191 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 192                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 193                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 194 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 195                                 FTIM2_NOR_TCH(0x4) | \
 196                                 FTIM2_NOR_TWPH(0x0E) | \
 197                                 FTIM2_NOR_TWP(0x1c))
 198 #define CONFIG_SYS_NOR_FTIM3    0x0
 199
 200 #define CONFIG_SYS_FLASH_QUIET_TEST
 201 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 202
 203 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 204 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 205 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 206 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 207
 208 #define CONFIG_SYS_FLASH_EMPTY_INFO
 209 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 210                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 211 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 212 #define QIXIS_BASE              0xffdf0000
 213 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 214 #define QIXIS_LBMAP_SWITCH              0x06
 215 #define QIXIS_LBMAP_MASK                0x0f
 216 #define QIXIS_LBMAP_SHIFT               0
 217 #define QIXIS_LBMAP_DFLTBANK            0x00
 218 #define QIXIS_LBMAP_ALTBANK             0x04
 219 #define QIXIS_RST_CTL_RESET             0x31
 220 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 221 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 222 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 223 #define QIXIS_RST_FORCE_MEM             0x01
 224
 225 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 226 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 227                                 | CSPR_PORT_SIZE_8 \
 228                                 | CSPR_MSEL_GPCM \
 229                                 | CSPR_V)
 230 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 231 #define CONFIG_SYS_CSOR3        0x0
 232 /* QIXIS Timing parameters for IFC CS3 */
 233 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 234                                         FTIM0_GPCM_TEADC(0x0e) | \
 235                                         FTIM0_GPCM_TEAHC(0x0e))
 236 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 237                                         FTIM1_GPCM_TRAD(0x3f))
 238 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 239                                         FTIM2_GPCM_TCH(0x8) | \
 240                                         FTIM2_GPCM_TWP(0x1f))
 241 #define CONFIG_SYS_CS3_FTIM3            0x0
 242
 243 #define CONFIG_NAND_FSL_IFC
 244 #define CONFIG_SYS_NAND_BASE            0xff800000
 245 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 246
 247 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 248 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 249                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 250                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 251                                 | CSPR_V)
 252 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 253
 254 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 255                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 256                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 257                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 258                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 259                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 260                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 261
 262 #define CONFIG_SYS_NAND_ONFI_DETECTION
 263
 264 /* ONFI NAND Flash mode0 Timing Params */
 265 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 266                                         FTIM0_NAND_TWP(0x18)   | \
 267                                         FTIM0_NAND_TWCHT(0x07) | \
 268                                         FTIM0_NAND_TWH(0x0a))
 269 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 270                                         FTIM1_NAND_TWBE(0x39)  | \
 271                                         FTIM1_NAND_TRR(0x0e)   | \
 272                                         FTIM1_NAND_TRP(0x18))
 273 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 274                                         FTIM2_NAND_TREH(0x0a) | \
 275                                         FTIM2_NAND_TWHRE(0x1e))
 276 #define CONFIG_SYS_NAND_FTIM3           0x0
 277
 278 #define CONFIG_SYS_NAND_DDR_LAW         11
 279 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 280 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 281
 282 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 283
 284 #if defined(CONFIG_NAND)
 285 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 286 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 287 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 288 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 289 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 290 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 291 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 292 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 293 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 294 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 295 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 296 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 297 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 298 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 299 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 300 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 301 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 302 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 303 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 304 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 305 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 306 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 307 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 308 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 309 #else
 310 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 311 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 312 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 313 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 314 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 315 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 316 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 317 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 318 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 319 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 320 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 321 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 322 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 323 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 324 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 325 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 326 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 327 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 328 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 329 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 330 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 331 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 332 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 333 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 334 #endif
 335
 336 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 337
 338 #if defined(CONFIG_RAMBOOT_PBL)
 339 #define CONFIG_SYS_RAMBOOT
 340 #endif
 341
 342 #define CONFIG_BOARD_EARLY_INIT_R
 343 #define CONFIG_MISC_INIT_R
 344
 345 #define CONFIG_HWCONFIG
 346
 347 /* define to use L1 as initial stack */
 348 #define CONFIG_L1_INIT_RAM
 349 #define CONFIG_SYS_INIT_RAM_LOCK
 350 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 351 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 352 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 353 /* The assembler doesn't like typecast */
 354 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 355         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 356           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 357 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 358
 359 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 360                                         GENERATED_GBL_DATA_SIZE)
 361 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 362
 363 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 364 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 365
 366 /* Serial Port - controlled on board with jumper J8
 367  * open - index 2
 368  * shorted - index 1
 369  */
 370 #define CONFIG_CONS_INDEX       1
 371 #define CONFIG_SYS_NS16550_SERIAL
 372 #define CONFIG_SYS_NS16550_REG_SIZE     1
 373 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 374
 375 #define CONFIG_SYS_BAUDRATE_TABLE       \
 376         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 377
 378 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 379 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 380 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 381 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 382
 383 /* Video */
 384 #define CONFIG_FSL_DIU_FB
 385 #ifdef CONFIG_FSL_DIU_FB
 386 #define CONFIG_FSL_DIU_CH7301
 387 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 388 #define CONFIG_VIDEO_LOGO
 389 #define CONFIG_VIDEO_BMP_LOGO
 390 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 391 /*
 392  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 393  * disable empty flash sector detection, which is I/O-intensive.
 394  */
 395 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 396 #endif
 397
 398 /* I2C */
 399 #define CONFIG_SYS_I2C
 400 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 401 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 402 #define CONFIG_SYS_FSL_I2C2_SPEED       50000
 403 #define CONFIG_SYS_FSL_I2C3_SPEED       50000
 404 #define CONFIG_SYS_FSL_I2C4_SPEED       50000
 405 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 406 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 407 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 408 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 409 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 410 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 411 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 412 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 413
 414 #define I2C_MUX_PCA_ADDR                0x77
 415 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 416
 417 /* I2C bus multiplexer */
 418 #define I2C_MUX_CH_DEFAULT      0x8
 419 #define I2C_MUX_CH_DIU          0xC
 420
 421 /* LDI/DVI Encoder for display */
 422 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 423 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 424
 425 /*
 426  * RTC configuration
 427  */
 428 #define RTC
 429 #define CONFIG_RTC_DS3231               1
 430 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 431
 432 /*
 433  * eSPI - Enhanced SPI
 434  */
 435 #define CONFIG_SF_DEFAULT_SPEED         10000000
 436 #define CONFIG_SF_DEFAULT_MODE          0
 437
 438 /*
 439  * General PCI
 440  * Memory space is mapped 1-1, but I/O space must start from 0.
 441  */
 442
 443 #ifdef CONFIG_PCI
 444 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 445 #ifdef CONFIG_PCIE1
 446 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 447 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 448 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 449 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 450 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 451 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 452 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 453 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 454 #endif
 455
 456 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 457 #ifdef CONFIG_PCIE2
 458 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 459 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 460 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 461 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 462 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 463 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 464 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 465 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 466 #endif
 467
 468 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 469 #ifdef CONFIG_PCIE3
 470 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 471 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 472 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 473 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 474 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 475 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 476 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 477 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 478 #endif
 479
 480 /* controller 4, Base address 203000 */
 481 #ifdef CONFIG_PCIE4
 482 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 483 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 484 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 485 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 486 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 487 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 488 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 489 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 490 #endif
 491
 492 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 493 #endif  /* CONFIG_PCI */
 494
 495 /* SATA */
 496 #define CONFIG_FSL_SATA_V2
 497 #ifdef CONFIG_FSL_SATA_V2
 498 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 499 #define CONFIG_SATA1
 500 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 501 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 502 #define CONFIG_SATA2
 503 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 504 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 505
 506 #define CONFIG_LBA48
 507 #endif
 508
 509 /*
 510 * USB
 511 */
 512 #define CONFIG_HAS_FSL_DR_USB
 513
 514 #ifdef CONFIG_HAS_FSL_DR_USB
 515 #ifdef CONFIG_USB_EHCI_HCD
 516 #define CONFIG_USB_EHCI_FSL
 517 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 518 #endif
 519 #endif
 520
 521 #ifdef CONFIG_MMC
 522 #define CONFIG_FSL_ESDHC
 523 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 524 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 525 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 526 #endif
 527
 528 /* Qman/Bman */
 529 #ifndef CONFIG_NOBQFMAN
 530 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 531 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 532 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 533 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 534 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 535 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 536 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 537 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 538 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 539                                         CONFIG_SYS_BMAN_CENA_SIZE)
 540 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 541 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 542 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 543 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 544 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 545 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 546 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 547 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 548 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 549 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 550 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 551                                         CONFIG_SYS_QMAN_CENA_SIZE)
 552 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 553 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 554
 555 #define CONFIG_SYS_DPAA_FMAN
 556 #define CONFIG_SYS_DPAA_PME
 557
 558 #define CONFIG_QE
 559 #define CONFIG_U_QE
 560 /* Default address of microcode for the Linux Fman driver */
 561 #if defined(CONFIG_SPIFLASH)
 562 /*
 563  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 564  * env, so we got 0x110000.
 565  */
 566 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 567 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 568 #elif defined(CONFIG_SDCARD)
 569 /*
 570  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 571  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 572  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 573  */
 574 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 575 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 576 #elif defined(CONFIG_NAND)
 577 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 578 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 579 #else
 580 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 581 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 582 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 583 #endif
 584 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 585 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 586 #endif /* CONFIG_NOBQFMAN */
 587
 588 #ifdef CONFIG_SYS_DPAA_FMAN
 589 #define CONFIG_FMAN_ENET
 590 #define CONFIG_PHYLIB_10G
 591 #define CONFIG_PHY_VITESSE
 592 #define CONFIG_PHY_REALTEK
 593 #define CONFIG_PHY_TERANETICS
 594 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 595 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 596 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 597 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 598 #endif
 599
 600 #ifdef CONFIG_FMAN_ENET
 601 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x01
 602 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x02
 603
 604 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 605 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 606 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 607 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 608
 609 #define CONFIG_MII              /* MII PHY management */
 610 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 611 #endif
 612
 613 /* Enable VSC9953 L2 Switch driver */
 614 #define CONFIG_VSC9953
 615 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x14
 616 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x18
 617
 618 /*
 619  * Dynamic MTD Partition support with mtdparts
 620  */
 621 #ifdef CONFIG_MTD_NOR_FLASH
 622 #define CONFIG_MTD_DEVICE
 623 #define CONFIG_MTD_PARTITIONS
 624 #define CONFIG_FLASH_CFI_MTD
 625 #endif
 626
 627 /*
 628  * Environment
 629  */
 630 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 631 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 632
 633 /*
 634  * Miscellaneous configurable options
 635  */
 636 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 637
 638 /*
 639  * For booting Linux, the board info and command line data
 640  * have to be in the first 64 MB of memory, since this is
 641  * the maximum mapped by the Linux kernel during initialization.
 642  */
 643 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 644 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 645
 646 #ifdef CONFIG_CMD_KGDB
 647 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 648 #endif
 649
 650 /*
 651  * Environment Configuration
 652  */
 653 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 654 #define CONFIG_BOOTFILE         "uImage"
 655 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 656
 657 /* default location for tftp and bootm */
 658 #define CONFIG_LOADADDR         1000000
 659
 660 #define __USB_PHY_TYPE  utmi
 661
 662 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 663         "hwconfig=fsl_ddr:bank_intlv=auto;"                     \
 664         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 665         "netdev=eth0\0"                                         \
 666         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 667         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 668         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 669         "tftpflash=tftpboot $loadaddr $uboot && "               \
 670         "protect off $ubootaddr +$filesize && "                 \
 671         "erase $ubootaddr +$filesize && "                       \
 672         "cp.b $loadaddr $ubootaddr $filesize && "               \
 673         "protect on $ubootaddr +$filesize && "                  \
 674         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 675         "consoledev=ttyS0\0"                                    \
 676         "ramdiskaddr=2000000\0"                                 \
 677         "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
 678         "fdtaddr=1e00000\0"                                     \
 679         "fdtfile=t1040qds/t1040qds.dtb\0"                       \
 680         "bdev=sda3\0"
 681
 682 #define CONFIG_LINUX                       \
 683         "setenv bootargs root=/dev/ram rw "            \
 684         "console=$consoledev,$baudrate $othbootargs;"  \
 685         "setenv ramdiskaddr 0x02000000;"               \
 686         "setenv fdtaddr 0x00c00000;"                   \
 687         "setenv loadaddr 0x1000000;"                   \
 688         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 689
 690 #define CONFIG_HDBOOT                                   \
 691         "setenv bootargs root=/dev/$bdev rw "           \
 692         "console=$consoledev,$baudrate $othbootargs;"   \
 693         "tftp $loadaddr $bootfile;"                     \
 694         "tftp $fdtaddr $fdtfile;"                       \
 695         "bootm $loadaddr - $fdtaddr"
 696
 697 #define CONFIG_NFSBOOTCOMMAND                   \
 698         "setenv bootargs root=/dev/nfs rw "     \
 699         "nfsroot=$serverip:$rootpath "          \
 700         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 701         "console=$consoledev,$baudrate $othbootargs;"   \
 702         "tftp $loadaddr $bootfile;"             \
 703         "tftp $fdtaddr $fdtfile;"               \
 704         "bootm $loadaddr - $fdtaddr"
 705
 706 #define CONFIG_RAMBOOTCOMMAND                           \
 707         "setenv bootargs root=/dev/ram rw "             \
 708         "console=$consoledev,$baudrate $othbootargs;"   \
 709         "tftp $ramdiskaddr $ramdiskfile;"               \
 710         "tftp $loadaddr $bootfile;"                     \
 711         "tftp $fdtaddr $fdtfile;"                       \
 712         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 713
 714 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 715
 716 #include <asm/fsl_secure_boot.h>
 717
 718 #endif  /* __CONFIG_H */