include/configs/T102xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2020-2021 NXP
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 #include <linux/stringify.h>
  15
  16 /* High Level Configuration Options */
  17 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  18 #define CONFIG_ENABLE_36BIT_PHYS
  19
  20 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  21 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  22
  23 /* support deep sleep */
  24 #ifdef CONFIG_ARCH_T1024
  25 #define CONFIG_DEEP_SLEEP
  26 #endif
  27
  28 #ifdef CONFIG_RAMBOOT_PBL
  29 #define CONFIG_SPL_FLUSH_IMAGE
  30 #define CONFIG_SPL_PAD_TO               0x40000
  31 #define CONFIG_SPL_MAX_SIZE             0x28000
  32 #define RESET_VECTOR_OFFSET             0x27FFC
  33 #define BOOT_PAGE_OFFSET                0x27000
  34 #ifdef CONFIG_SPL_BUILD
  35 #define CONFIG_SPL_SKIP_RELOCATE
  36 #define CONFIG_SPL_COMMON_INIT_DDR
  37 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  38 #endif
  39
  40 #ifdef CONFIG_MTD_RAW_NAND
  41 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  42 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  43 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  44 #endif
  45
  46 #ifdef CONFIG_SPIFLASH
  47 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  48 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  49 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  50 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  51 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  52 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  53 #ifndef CONFIG_SPL_BUILD
  54 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  55 #endif
  56 #endif
  57
  58 #ifdef CONFIG_SDCARD
  59 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  60 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  61 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  62 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  63 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  64 #ifndef CONFIG_SPL_BUILD
  65 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  66 #endif
  67 #endif
  68
  69 #endif /* CONFIG_RAMBOOT_PBL */
  70
  71 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  72 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  73 #endif
  74
  75 /* PCIe Boot - Master */
  76 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  77 /*
  78  * for slave u-boot IMAGE instored in master memory space,
  79  * PHYS must be aligned based on the SIZE
  80  */
  81 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
  82 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
  83 #ifdef CONFIG_PHYS_64BIT
  84 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
  85 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
  86 #else
  87 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
  88 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
  89 #endif
  90 /*
  91  * for slave UCODE and ENV instored in master memory space,
  92  * PHYS must be aligned based on the SIZE
  93  */
  94 #ifdef CONFIG_PHYS_64BIT
  95 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
  96 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
  97 #else
  98 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
  99 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 100 #endif
 101 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 102 /* slave core release by master*/
 103 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 104 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 105
 106 /* PCIe Boot - Slave */
 107 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 108 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 109 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 110                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 111 /* Set 1M boot space for PCIe boot */
 112 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 113 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 114                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 115 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 116 #endif
 117
 118 /*
 119  * These can be toggled for performance analysis, otherwise use default.
 120  */
 121 #define CONFIG_SYS_CACHE_STASHING
 122 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 123 #ifdef CONFIG_DDR_ECC
 124 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 125 #endif
 126
 127 /*
 128  *  Config the L3 Cache as L3 SRAM
 129  */
 130 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 131 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 132 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 133 #define SPL_ENV_ADDR                    (CONFIG_SPL_GD_ADDR + 4 * 1024)
 134 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 135 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 136 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 137
 138 #ifdef CONFIG_PHYS_64BIT
 139 #define CONFIG_SYS_DCSRBAR              0xf0000000
 140 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 141 #endif
 142
 143 /* EEPROM */
 144 #define CONFIG_SYS_I2C_EEPROM_NXID
 145 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 146
 147 /*
 148  * DDR Setup
 149  */
 150 #define CONFIG_VERY_BIG_RAM
 151 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 152 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 153 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 154 #if defined(CONFIG_TARGET_T1024RDB)
 155 #define CONFIG_SYS_SPD_BUS_NUM  0
 156 #define SPD_EEPROM_ADDRESS      0x51
 157 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 158 #elif defined(CONFIG_TARGET_T1023RDB)
 159 #define CONFIG_SYS_DDR_RAW_TIMING
 160 #define CONFIG_SYS_SDRAM_SIZE   2048
 161 #endif
 162
 163 /*
 164  * IFC Definitions
 165  */
 166 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 167 #ifdef CONFIG_PHYS_64BIT
 168 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 169 #else
 170 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 171 #endif
 172
 173 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 174 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 175                                 CSPR_PORT_SIZE_16 | \
 176                                 CSPR_MSEL_NOR | \
 177                                 CSPR_V)
 178 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 179
 180 /* NOR Flash Timing Params */
 181 #if defined(CONFIG_TARGET_T1024RDB)
 182 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 183 #elif defined(CONFIG_TARGET_T1023RDB)
 184 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 185                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 186 #endif
 187 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 188                                 FTIM0_NOR_TEADC(0x5) | \
 189                                 FTIM0_NOR_TEAHC(0x5))
 190 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 191                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 192                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 193 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 194                                 FTIM2_NOR_TCH(0x4) | \
 195                                 FTIM2_NOR_TWPH(0x0E) | \
 196                                 FTIM2_NOR_TWP(0x1c))
 197 #define CONFIG_SYS_NOR_FTIM3    0x0
 198
 199 #define CONFIG_SYS_FLASH_QUIET_TEST
 200 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 201
 202 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 203 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 204 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 205
 206 #define CONFIG_SYS_FLASH_EMPTY_INFO
 207 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 208
 209 #ifdef CONFIG_TARGET_T1024RDB
 210 /* CPLD on IFC */
 211 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 212 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 213 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 214 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 215                                                 | CSPR_PORT_SIZE_8 \
 216                                                 | CSPR_MSEL_GPCM \
 217                                                 | CSPR_V)
 218 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 219 #define CONFIG_SYS_CSOR2                0x0
 220
 221 /* CPLD Timing parameters for IFC CS2 */
 222 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 223                                                 FTIM0_GPCM_TEADC(0x0e) | \
 224                                                 FTIM0_GPCM_TEAHC(0x0e))
 225 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 226                                                 FTIM1_GPCM_TRAD(0x1f))
 227 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 228                                                 FTIM2_GPCM_TCH(0x8) | \
 229                                                 FTIM2_GPCM_TWP(0x1f))
 230 #define CONFIG_SYS_CS2_FTIM3            0x0
 231 #endif
 232
 233 /* NAND Flash on IFC */
 234 #define CONFIG_SYS_NAND_BASE            0xff800000
 235 #ifdef CONFIG_PHYS_64BIT
 236 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 237 #else
 238 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 239 #endif
 240 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 241 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 242                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 243                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 244                                 | CSPR_V)
 245 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 246
 247 #if defined(CONFIG_TARGET_T1024RDB)
 248 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 249                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 250                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 251                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 252                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 253                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 254                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 255 #elif defined(CONFIG_TARGET_T1023RDB)
 256 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 257                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 258                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 259                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 260                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 261                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 262                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 263 #endif
 264
 265 /* ONFI NAND Flash mode0 Timing Params */
 266 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 267                                         FTIM0_NAND_TWP(0x18)   | \
 268                                         FTIM0_NAND_TWCHT(0x07) | \
 269                                         FTIM0_NAND_TWH(0x0a))
 270 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 271                                         FTIM1_NAND_TWBE(0x39)  | \
 272                                         FTIM1_NAND_TRR(0x0e)   | \
 273                                         FTIM1_NAND_TRP(0x18))
 274 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 275                                         FTIM2_NAND_TREH(0x0a) | \
 276                                         FTIM2_NAND_TWHRE(0x1e))
 277 #define CONFIG_SYS_NAND_FTIM3           0x0
 278
 279 #define CONFIG_SYS_NAND_DDR_LAW         11
 280 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 281 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 282
 283 #if defined(CONFIG_MTD_RAW_NAND)
 284 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 285 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 286 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 287 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 288 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 289 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 290 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 291 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 292 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 293 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 294 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 295 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 296 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 297 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 298 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 299 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 300 #else
 301 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 302 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 303 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 304 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 305 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 306 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 307 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 308 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 309 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 310 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 311 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 312 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 313 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 314 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 315 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 316 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 317 #endif
 318
 319 #ifdef CONFIG_SPL_BUILD
 320 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 321 #else
 322 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 323 #endif
 324
 325 #if defined(CONFIG_RAMBOOT_PBL)
 326 #define CONFIG_SYS_RAMBOOT
 327 #endif
 328
 329 #define CONFIG_HWCONFIG
 330
 331 /* define to use L1 as initial stack */
 332 #define CONFIG_L1_INIT_RAM
 333 #define CONFIG_SYS_INIT_RAM_LOCK
 334 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 335 #ifdef CONFIG_PHYS_64BIT
 336 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 337 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 338 /* The assembler doesn't like typecast */
 339 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 340         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 341           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 342 #else
 343 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 344 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 345 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 346 #endif
 347 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 348
 349 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 350                                         GENERATED_GBL_DATA_SIZE)
 351 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 352
 353 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 354
 355 /* Serial Port */
 356 #define CONFIG_SYS_NS16550_SERIAL
 357 #define CONFIG_SYS_NS16550_REG_SIZE     1
 358 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 359
 360 #define CONFIG_SYS_BAUDRATE_TABLE       \
 361         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 362
 363 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 364 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 365 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 366 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 367
 368 /* Video */
 369 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 370 #ifdef CONFIG_FSL_DIU_FB
 371 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 372 #define CONFIG_VIDEO_BMP_LOGO
 373 /*
 374  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 375  * disable empty flash sector detection, which is I/O-intensive.
 376  */
 377 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 378 #endif
 379
 380 /* I2C */
 381
 382 #define I2C_PCA6408_BUS_NUM             1
 383 #define I2C_PCA6408_ADDR                0x20
 384
 385 /* I2C bus multiplexer */
 386 #define I2C_MUX_CH_DEFAULT      0x8
 387
 388 /*
 389  * RTC configuration
 390  */
 391 #define RTC
 392 #define CONFIG_RTC_DS1337       1
 393 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 394
 395 /*
 396  * eSPI - Enhanced SPI
 397  */
 398
 399 /*
 400  * General PCIe
 401  * Memory space is mapped 1-1, but I/O space must start from 0.
 402  */
 403 #define CONFIG_PCIE1            /* PCIE controller 1 */
 404 #define CONFIG_PCIE2            /* PCIE controller 2 */
 405 #define CONFIG_PCIE3            /* PCIE controller 3 */
 406
 407 #ifdef CONFIG_PCI
 408 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 409 #ifdef CONFIG_PCIE1
 410 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 411 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 412 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 413 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 414 #endif
 415
 416 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 417 #ifdef CONFIG_PCIE2
 418 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 419 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 420 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 421 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 422 #endif
 423
 424 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 425 #ifdef CONFIG_PCIE3
 426 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 427 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 428 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 429 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 430 #endif
 431
 432 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 433 #endif  /* CONFIG_PCI */
 434
 435 /*
 436  * USB
 437  */
 438 #define CONFIG_HAS_FSL_DR_USB
 439
 440 #ifdef CONFIG_HAS_FSL_DR_USB
 441 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 442 #endif
 443
 444 /*
 445  * SDHC
 446  */
 447 #ifdef CONFIG_MMC
 448 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 449 #endif
 450
 451 /* Qman/Bman */
 452 #ifndef CONFIG_NOBQFMAN
 453 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 454 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 455 #ifdef CONFIG_PHYS_64BIT
 456 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 457 #else
 458 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 459 #endif
 460 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 461 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 462 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 463 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 464 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 465 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 466                                         CONFIG_SYS_BMAN_CENA_SIZE)
 467 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 468 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 469 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 470 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 471 #ifdef CONFIG_PHYS_64BIT
 472 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 473 #else
 474 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 475 #endif
 476 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 477 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 478 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 479 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 480 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 481 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 482                                         CONFIG_SYS_QMAN_CENA_SIZE)
 483 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 484 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 485
 486 #define CONFIG_SYS_DPAA_FMAN
 487
 488 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 489 #endif /* CONFIG_NOBQFMAN */
 490
 491 #ifdef CONFIG_SYS_DPAA_FMAN
 492 #if defined(CONFIG_TARGET_T1024RDB)
 493 #define RGMII_PHY1_ADDR         0x2
 494 #define RGMII_PHY2_ADDR         0x6
 495 #define SGMII_AQR_PHY_ADDR      0x2
 496 #define FM1_10GEC1_PHY_ADDR     0x1
 497 #elif defined(CONFIG_TARGET_T1023RDB)
 498 #define RGMII_PHY1_ADDR         0x1
 499 #define SGMII_RTK_PHY_ADDR      0x3
 500 #define SGMII_AQR_PHY_ADDR      0x2
 501 #endif
 502 #endif
 503
 504 /*
 505  * Dynamic MTD Partition support with mtdparts
 506  */
 507
 508 /*
 509  * Environment
 510  */
 511 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 512 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 513
 514 /*
 515  * Miscellaneous configurable options
 516  */
 517
 518 /*
 519  * For booting Linux, the board info and command line data
 520  * have to be in the first 64 MB of memory, since this is
 521  * the maximum mapped by the Linux kernel during initialization.
 522  */
 523 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 524 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 525
 526 /*
 527  * Environment Configuration
 528  */
 529 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 530 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 531 #define __USB_PHY_TYPE          utmi
 532
 533 #ifdef CONFIG_ARCH_T1024
 534 #define CONFIG_BOARDNAME t1024rdb
 535 #define BANK_INTLV cs0_cs1
 536 #else
 537 #define CONFIG_BOARDNAME t1023rdb
 538 #define BANK_INTLV  null
 539 #endif
 540
 541 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 542         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 543         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 544         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 545         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 546         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 547         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 548         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 549         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 550         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 551         "netdev=eth0\0"                                         \
 552         "tftpflash=tftpboot $loadaddr $uboot && "               \
 553         "protect off $ubootaddr +$filesize && "                 \
 554         "erase $ubootaddr +$filesize && "                       \
 555         "cp.b $loadaddr $ubootaddr $filesize && "               \
 556         "protect on $ubootaddr +$filesize && "                  \
 557         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 558         "consoledev=ttyS0\0"                                    \
 559         "ramdiskaddr=2000000\0"                                 \
 560         "fdtaddr=1e00000\0"                                     \
 561         "bdev=sda3\0"
 562
 563 #include <asm/fsl_secure_boot.h>
 564
 565 #endif  /* __T1024RDB_H */