include/configs/T102xRDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * T1024/T1023 RDB board configuration file
   8  */
   9
  10 #ifndef __T1024RDB_H
  11 #define __T1024RDB_H
  12
  13 /* High Level Configuration Options */
  14 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  15 #define CONFIG_ENABLE_36BIT_PHYS
  16
  17 #ifdef CONFIG_PHYS_64BIT
  18 #define CONFIG_ADDR_MAP         1
  19 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  20 #endif
  21
  22 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  23 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  24
  25 #define CONFIG_ENV_OVERWRITE
  26
  27 /* support deep sleep */
  28 #ifdef CONFIG_ARCH_T1024
  29 #define CONFIG_DEEP_SLEEP
  30 #endif
  31
  32 #ifdef CONFIG_RAMBOOT_PBL
  33 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  34 #define CONFIG_SPL_FLUSH_IMAGE
  35 #define CONFIG_SPL_PAD_TO               0x40000
  36 #define CONFIG_SPL_MAX_SIZE             0x28000
  37 #define RESET_VECTOR_OFFSET             0x27FFC
  38 #define BOOT_PAGE_OFFSET                0x27000
  39 #ifdef CONFIG_SPL_BUILD
  40 #define CONFIG_SPL_SKIP_RELOCATE
  41 #define CONFIG_SPL_COMMON_INIT_DDR
  42 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  43 #endif
  44
  45 #ifdef CONFIG_NAND
  46 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  47 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  48 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  49 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  50 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  51 #if defined(CONFIG_TARGET_T1024RDB)
  52 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg
  53 #elif defined(CONFIG_TARGET_T1023RDB)
  54 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg
  55 #endif
  56 #define CONFIG_SPL_NAND_BOOT
  57 #endif
  58
  59 #ifdef CONFIG_SPIFLASH
  60 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  61 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  62 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  63 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  64 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  65 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  66 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  67 #ifndef CONFIG_SPL_BUILD
  68 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  69 #endif
  70 #if defined(CONFIG_TARGET_T1024RDB)
  71 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg
  72 #elif defined(CONFIG_TARGET_T1023RDB)
  73 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg
  74 #endif
  75 #define CONFIG_SPL_SPI_BOOT
  76 #endif
  77
  78 #ifdef CONFIG_SDCARD
  79 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  80 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  81 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  82 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  83 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  84 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  85 #ifndef CONFIG_SPL_BUILD
  86 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  87 #endif
  88 #if defined(CONFIG_TARGET_T1024RDB)
  89 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg
  90 #elif defined(CONFIG_TARGET_T1023RDB)
  91 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg
  92 #endif
  93 #define CONFIG_SPL_MMC_BOOT
  94 #endif
  95
  96 #endif /* CONFIG_RAMBOOT_PBL */
  97
  98 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  99 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 100 #endif
 101
 102 /* PCIe Boot - Master */
 103 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 104 /*
 105  * for slave u-boot IMAGE instored in master memory space,
 106  * PHYS must be aligned based on the SIZE
 107  */
 108 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 109 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 110 #ifdef CONFIG_PHYS_64BIT
 111 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 112 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 113 #else
 114 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 115 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 116 #endif
 117 /*
 118  * for slave UCODE and ENV instored in master memory space,
 119  * PHYS must be aligned based on the SIZE
 120  */
 121 #ifdef CONFIG_PHYS_64BIT
 122 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 123 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 124 #else
 125 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 126 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 127 #endif
 128 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 129 /* slave core release by master*/
 130 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 131 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 132
 133 /* PCIe Boot - Slave */
 134 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 135 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 136 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 137                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 138 /* Set 1M boot space for PCIe boot */
 139 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 140 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 141                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 142 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 143 #endif
 144
 145 #if defined(CONFIG_SPIFLASH)
 146 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 147 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 148 #if defined(CONFIG_TARGET_T1024RDB)
 149 #define CONFIG_ENV_SECT_SIZE            0x10000
 150 #elif defined(CONFIG_TARGET_T1023RDB)
 151 #define CONFIG_ENV_SECT_SIZE            0x40000
 152 #endif
 153 #elif defined(CONFIG_SDCARD)
 154 #define CONFIG_SYS_MMC_ENV_DEV          0
 155 #define CONFIG_ENV_SIZE                 0x2000
 156 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 157 #elif defined(CONFIG_NAND)
 158 #define CONFIG_ENV_SIZE                 0x2000
 159 #if defined(CONFIG_TARGET_T1024RDB)
 160 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 161 #elif defined(CONFIG_TARGET_T1023RDB)
 162 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 163 #endif
 164 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 165 #define CONFIG_ENV_ADDR         0xffe20000
 166 #define CONFIG_ENV_SIZE         0x2000
 167 #elif defined(CONFIG_ENV_IS_NOWHERE)
 168 #define CONFIG_ENV_SIZE         0x2000
 169 #else
 170 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 171 #define CONFIG_ENV_SIZE         0x2000
 172 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 173 #endif
 174
 175 #ifndef __ASSEMBLY__
 176 unsigned long get_board_sys_clk(void);
 177 unsigned long get_board_ddr_clk(void);
 178 #endif
 179
 180 #define CONFIG_SYS_CLK_FREQ     100000000
 181 #define CONFIG_DDR_CLK_FREQ     100000000
 182
 183 /*
 184  * These can be toggled for performance analysis, otherwise use default.
 185  */
 186 #define CONFIG_SYS_CACHE_STASHING
 187 #define CONFIG_BACKSIDE_L2_CACHE
 188 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 189 #define CONFIG_BTB                      /* toggle branch predition */
 190 #define CONFIG_DDR_ECC
 191 #ifdef CONFIG_DDR_ECC
 192 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 193 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 194 #endif
 195
 196 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 197 #define CONFIG_SYS_MEMTEST_END          0x00400000
 198
 199 /*
 200  *  Config the L3 Cache as L3 SRAM
 201  */
 202 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 203 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 204 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 205 #ifdef CONFIG_RAMBOOT_PBL
 206 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 207 #endif
 208 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 209 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 210 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 211
 212 #ifdef CONFIG_PHYS_64BIT
 213 #define CONFIG_SYS_DCSRBAR              0xf0000000
 214 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 215 #endif
 216
 217 /* EEPROM */
 218 #define CONFIG_ID_EEPROM
 219 #define CONFIG_SYS_I2C_EEPROM_NXID
 220 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 221 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 222 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 223 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 224 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 225
 226 /*
 227  * DDR Setup
 228  */
 229 #define CONFIG_VERY_BIG_RAM
 230 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 231 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 232 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 233 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 234 #if defined(CONFIG_TARGET_T1024RDB)
 235 #define CONFIG_DDR_SPD
 236 #define CONFIG_SYS_SPD_BUS_NUM  0
 237 #define SPD_EEPROM_ADDRESS      0x51
 238 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 239 #elif defined(CONFIG_TARGET_T1023RDB)
 240 #define CONFIG_SYS_DDR_RAW_TIMING
 241 #define CONFIG_SYS_SDRAM_SIZE   2048
 242 #endif
 243
 244 /*
 245  * IFC Definitions
 246  */
 247 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 248 #ifdef CONFIG_PHYS_64BIT
 249 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 250 #else
 251 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 252 #endif
 253
 254 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 255 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 256                                 CSPR_PORT_SIZE_16 | \
 257                                 CSPR_MSEL_NOR | \
 258                                 CSPR_V)
 259 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 260
 261 /* NOR Flash Timing Params */
 262 #if defined(CONFIG_TARGET_T1024RDB)
 263 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 264 #elif defined(CONFIG_TARGET_T1023RDB)
 265 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 266                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 267 #endif
 268 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 269                                 FTIM0_NOR_TEADC(0x5) | \
 270                                 FTIM0_NOR_TEAHC(0x5))
 271 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 272                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 273                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 274 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 275                                 FTIM2_NOR_TCH(0x4) | \
 276                                 FTIM2_NOR_TWPH(0x0E) | \
 277                                 FTIM2_NOR_TWP(0x1c))
 278 #define CONFIG_SYS_NOR_FTIM3    0x0
 279
 280 #define CONFIG_SYS_FLASH_QUIET_TEST
 281 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 282
 283 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 284 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 285 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 286 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 287
 288 #define CONFIG_SYS_FLASH_EMPTY_INFO
 289 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 290
 291 #ifdef CONFIG_TARGET_T1024RDB
 292 /* CPLD on IFC */
 293 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 294 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 295 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 296 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 297                                                 | CSPR_PORT_SIZE_8 \
 298                                                 | CSPR_MSEL_GPCM \
 299                                                 | CSPR_V)
 300 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 301 #define CONFIG_SYS_CSOR2                0x0
 302
 303 /* CPLD Timing parameters for IFC CS2 */
 304 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 305                                                 FTIM0_GPCM_TEADC(0x0e) | \
 306                                                 FTIM0_GPCM_TEAHC(0x0e))
 307 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 308                                                 FTIM1_GPCM_TRAD(0x1f))
 309 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 310                                                 FTIM2_GPCM_TCH(0x8) | \
 311                                                 FTIM2_GPCM_TWP(0x1f))
 312 #define CONFIG_SYS_CS2_FTIM3            0x0
 313 #endif
 314
 315 /* NAND Flash on IFC */
 316 #define CONFIG_NAND_FSL_IFC
 317 #define CONFIG_SYS_NAND_BASE            0xff800000
 318 #ifdef CONFIG_PHYS_64BIT
 319 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 320 #else
 321 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 322 #endif
 323 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 324 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 325                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 326                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 327                                 | CSPR_V)
 328 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 329
 330 #if defined(CONFIG_TARGET_T1024RDB)
 331 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 332                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 333                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 334                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 335                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 336                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 337                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 338 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 339 #elif defined(CONFIG_TARGET_T1023RDB)
 340 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 341                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 342                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 343                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 344                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 345                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 346                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 347 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 348 #endif
 349
 350 #define CONFIG_SYS_NAND_ONFI_DETECTION
 351 /* ONFI NAND Flash mode0 Timing Params */
 352 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 353                                         FTIM0_NAND_TWP(0x18)   | \
 354                                         FTIM0_NAND_TWCHT(0x07) | \
 355                                         FTIM0_NAND_TWH(0x0a))
 356 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 357                                         FTIM1_NAND_TWBE(0x39)  | \
 358                                         FTIM1_NAND_TRR(0x0e)   | \
 359                                         FTIM1_NAND_TRP(0x18))
 360 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 361                                         FTIM2_NAND_TREH(0x0a) | \
 362                                         FTIM2_NAND_TWHRE(0x1e))
 363 #define CONFIG_SYS_NAND_FTIM3           0x0
 364
 365 #define CONFIG_SYS_NAND_DDR_LAW         11
 366 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 367 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 368
 369 #if defined(CONFIG_NAND)
 370 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 371 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 372 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 373 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 374 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 375 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 376 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 377 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 378 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 379 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 380 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 381 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 382 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 383 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 384 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 385 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 386 #else
 387 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 388 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 389 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 390 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 391 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 392 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 393 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 394 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 395 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 396 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 397 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 398 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 399 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 400 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 401 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 402 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 403 #endif
 404
 405 #ifdef CONFIG_SPL_BUILD
 406 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 407 #else
 408 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 409 #endif
 410
 411 #if defined(CONFIG_RAMBOOT_PBL)
 412 #define CONFIG_SYS_RAMBOOT
 413 #endif
 414
 415 #define CONFIG_HWCONFIG
 416
 417 /* define to use L1 as initial stack */
 418 #define CONFIG_L1_INIT_RAM
 419 #define CONFIG_SYS_INIT_RAM_LOCK
 420 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 421 #ifdef CONFIG_PHYS_64BIT
 422 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 423 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 424 /* The assembler doesn't like typecast */
 425 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 426         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 427           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 428 #else
 429 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 430 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 431 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 432 #endif
 433 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 434
 435 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 436                                         GENERATED_GBL_DATA_SIZE)
 437 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 438
 439 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 440 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 441
 442 /* Serial Port */
 443 #define CONFIG_SYS_NS16550_SERIAL
 444 #define CONFIG_SYS_NS16550_REG_SIZE     1
 445 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 446
 447 #define CONFIG_SYS_BAUDRATE_TABLE       \
 448         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 449
 450 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 451 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 452 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 453 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 454
 455 /* Video */
 456 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 457 #ifdef CONFIG_FSL_DIU_FB
 458 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 459 #define CONFIG_VIDEO_LOGO
 460 #define CONFIG_VIDEO_BMP_LOGO
 461 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 462 /*
 463  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 464  * disable empty flash sector detection, which is I/O-intensive.
 465  */
 466 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 467 #endif
 468
 469 /* I2C */
 470 #define CONFIG_SYS_I2C
 471 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 472 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 473 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 474 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 475 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 476 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 477 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 478
 479 #define I2C_PCA6408_BUS_NUM             1
 480 #define I2C_PCA6408_ADDR                0x20
 481
 482 /* I2C bus multiplexer */
 483 #define I2C_MUX_CH_DEFAULT      0x8
 484
 485 /*
 486  * RTC configuration
 487  */
 488 #define RTC
 489 #define CONFIG_RTC_DS1337       1
 490 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 491
 492 /*
 493  * eSPI - Enhanced SPI
 494  */
 495
 496 /*
 497  * General PCIe
 498  * Memory space is mapped 1-1, but I/O space must start from 0.
 499  */
 500 #define CONFIG_PCIE1            /* PCIE controller 1 */
 501 #define CONFIG_PCIE2            /* PCIE controller 2 */
 502 #define CONFIG_PCIE3            /* PCIE controller 3 */
 503 #ifdef CONFIG_ARCH_T1040
 504 #define CONFIG_PCIE4            /* PCIE controller 4 */
 505 #endif
 506 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 507 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 508 #define CONFIG_PCI_INDIRECT_BRIDGE
 509
 510 #ifdef CONFIG_PCI
 511 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 512 #ifdef CONFIG_PCIE1
 513 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 514 #ifdef CONFIG_PHYS_64BIT
 515 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 516 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 517 #else
 518 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 519 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 520 #endif
 521 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 522 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 523 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 524 #ifdef CONFIG_PHYS_64BIT
 525 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 526 #else
 527 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 528 #endif
 529 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 530 #endif
 531
 532 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 533 #ifdef CONFIG_PCIE2
 534 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 535 #ifdef CONFIG_PHYS_64BIT
 536 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 537 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 538 #else
 539 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 540 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 541 #endif
 542 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 543 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 544 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 545 #ifdef CONFIG_PHYS_64BIT
 546 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 547 #else
 548 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 549 #endif
 550 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 551 #endif
 552
 553 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 554 #ifdef CONFIG_PCIE3
 555 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 556 #ifdef CONFIG_PHYS_64BIT
 557 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 558 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 559 #else
 560 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 561 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 562 #endif
 563 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 564 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 565 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 566 #ifdef CONFIG_PHYS_64BIT
 567 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 568 #else
 569 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 570 #endif
 571 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 572 #endif
 573
 574 /* controller 4, Base address 203000, to be removed */
 575 #ifdef CONFIG_PCIE4
 576 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 577 #ifdef CONFIG_PHYS_64BIT
 578 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 579 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 580 #else
 581 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 582 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 583 #endif
 584 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 585 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 586 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 587 #ifdef CONFIG_PHYS_64BIT
 588 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 589 #else
 590 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 591 #endif
 592 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 593 #endif
 594
 595 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 596 #endif  /* CONFIG_PCI */
 597
 598 /*
 599  * USB
 600  */
 601 #define CONFIG_HAS_FSL_DR_USB
 602
 603 #ifdef CONFIG_HAS_FSL_DR_USB
 604 #define CONFIG_USB_EHCI_FSL
 605 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 606 #endif
 607
 608 /*
 609  * SDHC
 610  */
 611 #ifdef CONFIG_MMC
 612 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 613 #endif
 614
 615 /* Qman/Bman */
 616 #ifndef CONFIG_NOBQFMAN
 617 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 618 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 619 #ifdef CONFIG_PHYS_64BIT
 620 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 621 #else
 622 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 623 #endif
 624 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 625 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 626 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 627 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 628 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 629 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 630                                         CONFIG_SYS_BMAN_CENA_SIZE)
 631 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 632 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 633 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 634 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 635 #ifdef CONFIG_PHYS_64BIT
 636 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 637 #else
 638 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 639 #endif
 640 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 641 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 642 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 643 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 644 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 645 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 646                                         CONFIG_SYS_QMAN_CENA_SIZE)
 647 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 648 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 649
 650 #define CONFIG_SYS_DPAA_FMAN
 651
 652 #ifdef CONFIG_TARGET_T1024RDB
 653 #define CONFIG_QE
 654 #endif
 655 /* Default address of microcode for the Linux FMan driver */
 656 #if defined(CONFIG_SPIFLASH)
 657 /*
 658  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 659  * env, so we got 0x110000.
 660  */
 661 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 662 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 663 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 664 #elif defined(CONFIG_SDCARD)
 665 /*
 666  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 667  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 668  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 669  */
 670 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 671 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 672 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 673 #elif defined(CONFIG_NAND)
 674 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 675 #if defined(CONFIG_TARGET_T1024RDB)
 676 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 677 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 678 #elif defined(CONFIG_TARGET_T1023RDB)
 679 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 680 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 681 #endif
 682 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 683 /*
 684  * Slave has no ucode locally, it can fetch this from remote. When implementing
 685  * in two corenet boards, slave's ucode could be stored in master's memory
 686  * space, the address can be mapped from slave TLB->slave LAW->
 687  * slave SRIO or PCIE outbound window->master inbound window->
 688  * master LAW->the ucode address in master's memory space.
 689  */
 690 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 691 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 692 #else
 693 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 694 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 695 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 696 #endif
 697 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 698 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 699 #endif /* CONFIG_NOBQFMAN */
 700
 701 #ifdef CONFIG_SYS_DPAA_FMAN
 702 #define CONFIG_FMAN_ENET
 703 #define CONFIG_PHY_REALTEK
 704 #if defined(CONFIG_TARGET_T1024RDB)
 705 #define RGMII_PHY1_ADDR         0x2
 706 #define RGMII_PHY2_ADDR         0x6
 707 #define SGMII_AQR_PHY_ADDR      0x2
 708 #define FM1_10GEC1_PHY_ADDR     0x1
 709 #elif defined(CONFIG_TARGET_T1023RDB)
 710 #define RGMII_PHY1_ADDR         0x1
 711 #define SGMII_RTK_PHY_ADDR      0x3
 712 #define SGMII_AQR_PHY_ADDR      0x2
 713 #endif
 714 #endif
 715
 716 #ifdef CONFIG_FMAN_ENET
 717 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 718 #endif
 719
 720 /*
 721  * Dynamic MTD Partition support with mtdparts
 722  */
 723
 724 /*
 725  * Environment
 726  */
 727 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 728 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 729
 730 /*
 731  * Miscellaneous configurable options
 732  */
 733 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 734
 735 /*
 736  * For booting Linux, the board info and command line data
 737  * have to be in the first 64 MB of memory, since this is
 738  * the maximum mapped by the Linux kernel during initialization.
 739  */
 740 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 741 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 742
 743 #ifdef CONFIG_CMD_KGDB
 744 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 745 #endif
 746
 747 /*
 748  * Environment Configuration
 749  */
 750 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 751 #define CONFIG_BOOTFILE         "uImage"
 752 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 753 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 754 #define __USB_PHY_TYPE          utmi
 755
 756 #ifdef CONFIG_ARCH_T1024
 757 #define CONFIG_BOARDNAME t1024rdb
 758 #define BANK_INTLV cs0_cs1
 759 #else
 760 #define CONFIG_BOARDNAME t1023rdb
 761 #define BANK_INTLV  null
 762 #endif
 763
 764 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 765         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 766         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 767         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 768         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 769         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 770         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 771         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 772         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 773         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 774         "netdev=eth0\0"                                         \
 775         "tftpflash=tftpboot $loadaddr $uboot && "               \
 776         "protect off $ubootaddr +$filesize && "                 \
 777         "erase $ubootaddr +$filesize && "                       \
 778         "cp.b $loadaddr $ubootaddr $filesize && "               \
 779         "protect on $ubootaddr +$filesize && "                  \
 780         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 781         "consoledev=ttyS0\0"                                    \
 782         "ramdiskaddr=2000000\0"                                 \
 783         "fdtaddr=1e00000\0"                                     \
 784         "bdev=sda3\0"
 785
 786 #define CONFIG_LINUX                                    \
 787         "setenv bootargs root=/dev/ram rw "             \
 788         "console=$consoledev,$baudrate $othbootargs;"   \
 789         "setenv ramdiskaddr 0x02000000;"                \
 790         "setenv fdtaddr 0x00c00000;"                    \
 791         "setenv loadaddr 0x1000000;"                    \
 792         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 793
 794 #define CONFIG_NFSBOOTCOMMAND                   \
 795         "setenv bootargs root=/dev/nfs rw "     \
 796         "nfsroot=$serverip:$rootpath "          \
 797         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 798         "console=$consoledev,$baudrate $othbootargs;"   \
 799         "tftp $loadaddr $bootfile;"             \
 800         "tftp $fdtaddr $fdtfile;"               \
 801         "bootm $loadaddr - $fdtaddr"
 802
 803 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 804
 805 #include <asm/fsl_secure_boot.h>
 806
 807 #endif  /* __T1024RDB_H */