include/configs/T102xRDB.h

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * T1024/T1023 RDB board configuration file
   9  */
  10
  11 #ifndef __T1024RDB_H
  12 #define __T1024RDB_H
  13
  14 /* High Level Configuration Options */
  15 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  16 #define CONFIG_MP                       /* support multiple processors */
  17 #define CONFIG_ENABLE_36BIT_PHYS
  18
  19 #ifdef CONFIG_PHYS_64BIT
  20 #define CONFIG_ADDR_MAP         1
  21 #define CONFIG_SYS_NUM_ADDR_MAP 64      /* number of TLB1 entries */
  22 #endif
  23
  24 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  25 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  26 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  27
  28 #define CONFIG_ENV_OVERWRITE
  29
  30 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  31
  32 /* support deep sleep */
  33 #ifdef CONFIG_ARCH_T1024
  34 #define CONFIG_DEEP_SLEEP
  35 #endif
  36
  37 #ifdef CONFIG_RAMBOOT_PBL
  38 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
  39 #define CONFIG_SPL_FLUSH_IMAGE
  40 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  41 #define CONFIG_SYS_TEXT_BASE            0x30001000
  42 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  43 #define CONFIG_SPL_PAD_TO               0x40000
  44 #define CONFIG_SPL_MAX_SIZE             0x28000
  45 #define RESET_VECTOR_OFFSET             0x27FFC
  46 #define BOOT_PAGE_OFFSET                0x27000
  47 #ifdef CONFIG_SPL_BUILD
  48 #define CONFIG_SPL_SKIP_RELOCATE
  49 #define CONFIG_SPL_COMMON_INIT_DDR
  50 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  51 #define CONFIG_SYS_NO_FLASH
  52 #endif
  53
  54 #ifdef CONFIG_NAND
  55 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  56 #define CONFIG_SYS_NAND_U_BOOT_DST      0x30000000
  57 #define CONFIG_SYS_NAND_U_BOOT_START    0x30000000
  58 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  59 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  60 #if defined(CONFIG_TARGET_T1024RDB)
  61 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg
  62 #elif defined(CONFIG_TARGET_T1023RDB)
  63 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg
  64 #endif
  65 #define CONFIG_SPL_NAND_BOOT
  66 #endif
  67
  68 #ifdef CONFIG_SPIFLASH
  69 #define CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
  70 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  71 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  72 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x30000000)
  73 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x30000000)
  74 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (256 << 10)
  75 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  76 #ifndef CONFIG_SPL_BUILD
  77 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  78 #endif
  79 #if defined(CONFIG_TARGET_T1024RDB)
  80 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg
  81 #elif defined(CONFIG_TARGET_T1023RDB)
  82 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg
  83 #endif
  84 #define CONFIG_SPL_SPI_BOOT
  85 #endif
  86
  87 #ifdef CONFIG_SDCARD
  88 #define CONFIG_RESET_VECTOR_ADDRESS     0x30000FFC
  89 #define CONFIG_SPL_MMC_MINIMAL
  90 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  91 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x30000000)
  92 #define CONFIG_SYS_MMC_U_BOOT_START     (0x30000000)
  93 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (260 << 10)
  94 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  95 #ifndef CONFIG_SPL_BUILD
  96 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  97 #endif
  98 #if defined(CONFIG_TARGET_T1024RDB)
  99 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg
 100 #elif defined(CONFIG_TARGET_T1023RDB)
 101 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg
 102 #endif
 103 #define CONFIG_SPL_MMC_BOOT
 104 #endif
 105
 106 #endif /* CONFIG_RAMBOOT_PBL */
 107
 108 #ifndef CONFIG_SYS_TEXT_BASE
 109 #define CONFIG_SYS_TEXT_BASE    0xeff40000
 110 #endif
 111
 112 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 113 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 114 #endif
 115
 116 #ifndef CONFIG_SYS_NO_FLASH
 117 #define CONFIG_FLASH_CFI_DRIVER
 118 #define CONFIG_SYS_FLASH_CFI
 119 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 120 #endif
 121
 122 /* PCIe Boot - Master */
 123 #define CONFIG_SRIO_PCIE_BOOT_MASTER
 124 /*
 125  * for slave u-boot IMAGE instored in master memory space,
 126  * PHYS must be aligned based on the SIZE
 127  */
 128 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 129 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE     0x100000 /* 1M */
 130 #ifdef CONFIG_PHYS_64BIT
 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 133 #else
 134 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
 135 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
 136 #endif
 137 /*
 138  * for slave UCODE and ENV instored in master memory space,
 139  * PHYS must be aligned based on the SIZE
 140  */
 141 #ifdef CONFIG_PHYS_64BIT
 142 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 143 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0x3ffe00000ull
 144 #else
 145 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
 146 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS  0xffe00000
 147 #endif
 148 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE    0x40000 /* 256K */
 149 /* slave core release by master*/
 150 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET        0xe00e4
 151 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK      0x00000001 /* release core 0 */
 152
 153 /* PCIe Boot - Slave */
 154 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 155 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 156 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 157                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 158 /* Set 1M boot space for PCIe boot */
 159 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
 160 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
 161                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 162 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
 163 #define CONFIG_SYS_NO_FLASH
 164 #endif
 165
 166 #if defined(CONFIG_SPIFLASH)
 167 #define CONFIG_SYS_EXTRA_ENV_RELOC
 168 #define CONFIG_ENV_IS_IN_SPI_FLASH
 169 #define CONFIG_ENV_SPI_BUS              0
 170 #define CONFIG_ENV_SPI_CS               0
 171 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 172 #define CONFIG_ENV_SPI_MODE             0
 173 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 174 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 175 #if defined(CONFIG_TARGET_T1024RDB)
 176 #define CONFIG_ENV_SECT_SIZE            0x10000
 177 #elif defined(CONFIG_TARGET_T1023RDB)
 178 #define CONFIG_ENV_SECT_SIZE            0x40000
 179 #endif
 180 #elif defined(CONFIG_SDCARD)
 181 #define CONFIG_SYS_EXTRA_ENV_RELOC
 182 #define CONFIG_ENV_IS_IN_MMC
 183 #define CONFIG_SYS_MMC_ENV_DEV          0
 184 #define CONFIG_ENV_SIZE                 0x2000
 185 #define CONFIG_ENV_OFFSET               (512 * 0x800)
 186 #elif defined(CONFIG_NAND)
 187 #define CONFIG_SYS_EXTRA_ENV_RELOC
 188 #define CONFIG_ENV_IS_IN_NAND
 189 #define CONFIG_ENV_SIZE                 0x2000
 190 #if defined(CONFIG_TARGET_T1024RDB)
 191 #define CONFIG_ENV_OFFSET               (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
 192 #elif defined(CONFIG_TARGET_T1023RDB)
 193 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 194 #endif
 195 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 196 #define CONFIG_ENV_IS_IN_REMOTE
 197 #define CONFIG_ENV_ADDR         0xffe20000
 198 #define CONFIG_ENV_SIZE         0x2000
 199 #elif defined(CONFIG_ENV_IS_NOWHERE)
 200 #define CONFIG_ENV_SIZE         0x2000
 201 #else
 202 #define CONFIG_ENV_IS_IN_FLASH
 203 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 204 #define CONFIG_ENV_SIZE         0x2000
 205 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 206 #endif
 207
 208 #ifndef __ASSEMBLY__
 209 unsigned long get_board_sys_clk(void);
 210 unsigned long get_board_ddr_clk(void);
 211 #endif
 212
 213 #define CONFIG_SYS_CLK_FREQ     100000000
 214 #define CONFIG_DDR_CLK_FREQ     100000000
 215
 216 /*
 217  * These can be toggled for performance analysis, otherwise use default.
 218  */
 219 #define CONFIG_SYS_CACHE_STASHING
 220 #define CONFIG_BACKSIDE_L2_CACHE
 221 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 222 #define CONFIG_BTB                      /* toggle branch predition */
 223 #define CONFIG_DDR_ECC
 224 #ifdef CONFIG_DDR_ECC
 225 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 226 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 227 #endif
 228
 229 #define CONFIG_SYS_MEMTEST_START        0x00200000 /* memtest works on */
 230 #define CONFIG_SYS_MEMTEST_END          0x00400000
 231 #define CONFIG_SYS_ALT_MEMTEST
 232 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 233
 234 /*
 235  *  Config the L3 Cache as L3 SRAM
 236  */
 237 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 238 #define CONFIG_SYS_L3_SIZE              (256 << 10)
 239 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 240 #ifdef CONFIG_RAMBOOT_PBL
 241 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 242 #endif
 243 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 244 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 245 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 246 #define CONFIG_SPL_RELOC_STACK_SIZE     (22 << 10)
 247
 248 #ifdef CONFIG_PHYS_64BIT
 249 #define CONFIG_SYS_DCSRBAR              0xf0000000
 250 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 251 #endif
 252
 253 /* EEPROM */
 254 #define CONFIG_ID_EEPROM
 255 #define CONFIG_SYS_I2C_EEPROM_NXID
 256 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 257 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 258 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 259 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 260 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 261
 262 /*
 263  * DDR Setup
 264  */
 265 #define CONFIG_VERY_BIG_RAM
 266 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 267 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 268 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 269 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 270 #define CONFIG_FSL_DDR_INTERACTIVE
 271 #if defined(CONFIG_TARGET_T1024RDB)
 272 #define CONFIG_DDR_SPD
 273 #define CONFIG_SYS_SPD_BUS_NUM  0
 274 #define SPD_EEPROM_ADDRESS      0x51
 275 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 276 #elif defined(CONFIG_TARGET_T1023RDB)
 277 #define CONFIG_SYS_DDR_RAW_TIMING
 278 #define CONFIG_SYS_SDRAM_SIZE   2048
 279 #endif
 280
 281 /*
 282  * IFC Definitions
 283  */
 284 #define CONFIG_SYS_FLASH_BASE   0xe8000000
 285 #ifdef CONFIG_PHYS_64BIT
 286 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 287 #else
 288 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 289 #endif
 290
 291 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 292 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 293                                 CSPR_PORT_SIZE_16 | \
 294                                 CSPR_MSEL_NOR | \
 295                                 CSPR_V)
 296 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 297
 298 /* NOR Flash Timing Params */
 299 #if defined(CONFIG_TARGET_T1024RDB)
 300 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 301 #elif defined(CONFIG_TARGET_T1023RDB)
 302 #define CONFIG_SYS_NOR_CSOR    (CSOR_NOR_ADM_SHIFT(0) | \
 303                                 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
 304 #endif
 305 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 306                                 FTIM0_NOR_TEADC(0x5) | \
 307                                 FTIM0_NOR_TEAHC(0x5))
 308 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 309                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 310                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 311 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 312                                 FTIM2_NOR_TCH(0x4) | \
 313                                 FTIM2_NOR_TWPH(0x0E) | \
 314                                 FTIM2_NOR_TWP(0x1c))
 315 #define CONFIG_SYS_NOR_FTIM3    0x0
 316
 317 #define CONFIG_SYS_FLASH_QUIET_TEST
 318 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 319
 320 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 321 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 322 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 323 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 324
 325 #define CONFIG_SYS_FLASH_EMPTY_INFO
 326 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 327
 328 #ifdef CONFIG_TARGET_T1024RDB
 329 /* CPLD on IFC */
 330 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 331 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
 332 #define CONFIG_SYS_CSPR2_EXT            (0xf)
 333 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
 334                                                 | CSPR_PORT_SIZE_8 \
 335                                                 | CSPR_MSEL_GPCM \
 336                                                 | CSPR_V)
 337 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 338 #define CONFIG_SYS_CSOR2                0x0
 339
 340 /* CPLD Timing parameters for IFC CS2 */
 341 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 342                                                 FTIM0_GPCM_TEADC(0x0e) | \
 343                                                 FTIM0_GPCM_TEAHC(0x0e))
 344 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 345                                                 FTIM1_GPCM_TRAD(0x1f))
 346 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 347                                                 FTIM2_GPCM_TCH(0x8) | \
 348                                                 FTIM2_GPCM_TWP(0x1f))
 349 #define CONFIG_SYS_CS2_FTIM3            0x0
 350 #endif
 351
 352 /* NAND Flash on IFC */
 353 #define CONFIG_NAND_FSL_IFC
 354 #define CONFIG_SYS_NAND_BASE            0xff800000
 355 #ifdef CONFIG_PHYS_64BIT
 356 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 357 #else
 358 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 359 #endif
 360 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 361 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 362                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 363                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 364                                 | CSPR_V)
 365 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 366
 367 #if defined(CONFIG_TARGET_T1024RDB)
 368 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 369                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 370                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 371                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 372                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 373                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 374                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 375 #define CONFIG_SYS_NAND_BLOCK_SIZE      (512 * 1024)
 376 #elif defined(CONFIG_TARGET_T1023RDB)
 377 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 378                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 379                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 380                                 | CSOR_NAND_RAL_3       /* RAL 3Bytes */ \
 381                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 382                                 | CSOR_NAND_SPRZ_128    /* Spare size = 128 */ \
 383                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 384 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 385 #endif
 386
 387 #define CONFIG_SYS_NAND_ONFI_DETECTION
 388 /* ONFI NAND Flash mode0 Timing Params */
 389 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 390                                         FTIM0_NAND_TWP(0x18)   | \
 391                                         FTIM0_NAND_TWCHT(0x07) | \
 392                                         FTIM0_NAND_TWH(0x0a))
 393 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 394                                         FTIM1_NAND_TWBE(0x39)  | \
 395                                         FTIM1_NAND_TRR(0x0e)   | \
 396                                         FTIM1_NAND_TRP(0x18))
 397 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 398                                         FTIM2_NAND_TREH(0x0a) | \
 399                                         FTIM2_NAND_TWHRE(0x1e))
 400 #define CONFIG_SYS_NAND_FTIM3           0x0
 401
 402 #define CONFIG_SYS_NAND_DDR_LAW         11
 403 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 404 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 405 #define CONFIG_CMD_NAND
 406
 407 #if defined(CONFIG_NAND)
 408 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 409 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 410 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 411 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 412 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 413 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 414 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 415 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 416 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 417 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 418 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 419 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 420 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 421 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 422 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 423 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 424 #else
 425 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 426 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 427 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 428 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 429 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 430 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 431 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 432 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 433 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NAND_CSPR_EXT
 434 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 435 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 436 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 437 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 438 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 439 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 440 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 441 #endif
 442
 443 #ifdef CONFIG_SPL_BUILD
 444 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 445 #else
 446 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 447 #endif
 448
 449 #if defined(CONFIG_RAMBOOT_PBL)
 450 #define CONFIG_SYS_RAMBOOT
 451 #endif
 452
 453 #define CONFIG_BOARD_EARLY_INIT_R
 454 #define CONFIG_MISC_INIT_R
 455
 456 #define CONFIG_HWCONFIG
 457
 458 /* define to use L1 as initial stack */
 459 #define CONFIG_L1_INIT_RAM
 460 #define CONFIG_SYS_INIT_RAM_LOCK
 461 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 462 #ifdef CONFIG_PHYS_64BIT
 463 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 464 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 465 /* The assembler doesn't like typecast */
 466 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 467         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 468           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 469 #else
 470 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 471 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 472 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 473 #endif
 474 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 475
 476 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 477                                         GENERATED_GBL_DATA_SIZE)
 478 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 479
 480 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 481 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 482
 483 /* Serial Port */
 484 #define CONFIG_CONS_INDEX       1
 485 #define CONFIG_SYS_NS16550_SERIAL
 486 #define CONFIG_SYS_NS16550_REG_SIZE     1
 487 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 488
 489 #define CONFIG_SYS_BAUDRATE_TABLE       \
 490         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 491
 492 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 493 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 494 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 495 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 496
 497 /* Video */
 498 #undef CONFIG_FSL_DIU_FB        /* RDB doesn't support DIU */
 499 #ifdef CONFIG_FSL_DIU_FB
 500 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 501 #define CONFIG_CMD_BMP
 502 #define CONFIG_VIDEO_LOGO
 503 #define CONFIG_VIDEO_BMP_LOGO
 504 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 505 /*
 506  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 507  * disable empty flash sector detection, which is I/O-intensive.
 508  */
 509 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 510 #endif
 511
 512 /* I2C */
 513 #define CONFIG_SYS_I2C
 514 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 515 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 516 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 517 #define CONFIG_SYS_FSL_I2C2_SPEED       50000   /* I2C speed in Hz */
 518 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 519 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 520 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 521
 522 #define I2C_PCA6408_BUS_NUM             1
 523 #define I2C_PCA6408_ADDR                0x20
 524
 525 /* I2C bus multiplexer */
 526 #define I2C_MUX_CH_DEFAULT      0x8
 527
 528 /*
 529  * RTC configuration
 530  */
 531 #define RTC
 532 #define CONFIG_RTC_DS1337       1
 533 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 534
 535 /*
 536  * eSPI - Enhanced SPI
 537  */
 538 #define CONFIG_SPI_FLASH_BAR
 539 #define CONFIG_SF_DEFAULT_SPEED 10000000
 540 #define CONFIG_SF_DEFAULT_MODE  0
 541
 542 /*
 543  * General PCIe
 544  * Memory space is mapped 1-1, but I/O space must start from 0.
 545  */
 546 #define CONFIG_PCIE1            /* PCIE controller 1 */
 547 #define CONFIG_PCIE2            /* PCIE controller 2 */
 548 #define CONFIG_PCIE3            /* PCIE controller 3 */
 549 #ifdef CONFIG_ARCH_T1040
 550 #define CONFIG_PCIE4            /* PCIE controller 4 */
 551 #endif
 552 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 553 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 554 #define CONFIG_PCI_INDIRECT_BRIDGE
 555
 556 #ifdef CONFIG_PCI
 557 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 558 #ifdef CONFIG_PCIE1
 559 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 560 #ifdef CONFIG_PHYS_64BIT
 561 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 562 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 563 #else
 564 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 565 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 566 #endif
 567 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 568 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 569 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 570 #ifdef CONFIG_PHYS_64BIT
 571 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 572 #else
 573 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 574 #endif
 575 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 576 #endif
 577
 578 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 579 #ifdef CONFIG_PCIE2
 580 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 581 #ifdef CONFIG_PHYS_64BIT
 582 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 583 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 584 #else
 585 #define CONFIG_SYS_PCIE2_MEM_BUS        0x90000000
 586 #define CONFIG_SYS_PCIE2_MEM_PHYS       0x90000000
 587 #endif
 588 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 589 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 590 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 591 #ifdef CONFIG_PHYS_64BIT
 592 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 593 #else
 594 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 595 #endif
 596 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 597 #endif
 598
 599 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 600 #ifdef CONFIG_PCIE3
 601 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 602 #ifdef CONFIG_PHYS_64BIT
 603 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 604 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 605 #else
 606 #define CONFIG_SYS_PCIE3_MEM_BUS        0xa0000000
 607 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xa0000000
 608 #endif
 609 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 610 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 611 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 612 #ifdef CONFIG_PHYS_64BIT
 613 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 614 #else
 615 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 616 #endif
 617 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 618 #endif
 619
 620 /* controller 4, Base address 203000, to be removed */
 621 #ifdef CONFIG_PCIE4
 622 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 623 #ifdef CONFIG_PHYS_64BIT
 624 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 625 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 626 #else
 627 #define CONFIG_SYS_PCIE4_MEM_BUS        0xb0000000
 628 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xb0000000
 629 #endif
 630 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 631 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 632 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 633 #ifdef CONFIG_PHYS_64BIT
 634 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 635 #else
 636 #define CONFIG_SYS_PCIE4_IO_PHYS        0xf8030000
 637 #endif
 638 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 639 #endif
 640
 641 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 642 #define CONFIG_DOS_PARTITION
 643 #endif  /* CONFIG_PCI */
 644
 645 /*
 646  * USB
 647  */
 648 #define CONFIG_HAS_FSL_DR_USB
 649
 650 #ifdef CONFIG_HAS_FSL_DR_USB
 651 #define CONFIG_USB_EHCI
 652 #define CONFIG_USB_EHCI_FSL
 653 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 654 #endif
 655
 656 /*
 657  * SDHC
 658  */
 659 #ifdef CONFIG_MMC
 660 #define CONFIG_FSL_ESDHC
 661 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 662 #define CONFIG_GENERIC_MMC
 663 #define CONFIG_DOS_PARTITION
 664 #endif
 665
 666 /* Qman/Bman */
 667 #ifndef CONFIG_NOBQFMAN
 668 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 669 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 670 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 671 #ifdef CONFIG_PHYS_64BIT
 672 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 673 #else
 674 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 675 #endif
 676 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 677 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 678 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 679 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 680 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 681 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 682                                         CONFIG_SYS_BMAN_CENA_SIZE)
 683 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 684 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 685 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 686 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 687 #ifdef CONFIG_PHYS_64BIT
 688 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 689 #else
 690 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 691 #endif
 692 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 693 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 694 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 695 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 696 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 697 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 698                                         CONFIG_SYS_QMAN_CENA_SIZE)
 699 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 700 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 701
 702 #define CONFIG_SYS_DPAA_FMAN
 703
 704 #ifdef CONFIG_TARGET_T1024RDB
 705 #define CONFIG_QE
 706 #define CONFIG_U_QE
 707 #endif
 708 /* Default address of microcode for the Linux FMan driver */
 709 #if defined(CONFIG_SPIFLASH)
 710 /*
 711  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 712  * env, so we got 0x110000.
 713  */
 714 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 715 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 716 #define CONFIG_SYS_QE_FW_ADDR   0x130000
 717 #elif defined(CONFIG_SDCARD)
 718 /*
 719  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 720  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 721  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
 722  */
 723 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 724 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 725 #define CONFIG_SYS_QE_FW_ADDR           (512 * 0x920)
 726 #elif defined(CONFIG_NAND)
 727 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 728 #if defined(CONFIG_TARGET_T1024RDB)
 729 #define CONFIG_SYS_FMAN_FW_ADDR         (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 730 #define CONFIG_SYS_QE_FW_ADDR           (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
 731 #elif defined(CONFIG_TARGET_T1023RDB)
 732 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 733 #define CONFIG_SYS_QE_FW_ADDR           (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 734 #endif
 735 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 736 /*
 737  * Slave has no ucode locally, it can fetch this from remote. When implementing
 738  * in two corenet boards, slave's ucode could be stored in master's memory
 739  * space, the address can be mapped from slave TLB->slave LAW->
 740  * slave SRIO or PCIE outbound window->master inbound window->
 741  * master LAW->the ucode address in master's memory space.
 742  */
 743 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 744 #define CONFIG_SYS_FMAN_FW_ADDR         0xFFE00000
 745 #else
 746 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 747 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 748 #define CONFIG_SYS_QE_FW_ADDR           0xEFE00000
 749 #endif
 750 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 751 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 752 #endif /* CONFIG_NOBQFMAN */
 753
 754 #ifdef CONFIG_SYS_DPAA_FMAN
 755 #define CONFIG_FMAN_ENET
 756 #define CONFIG_PHYLIB_10G
 757 #define CONFIG_PHY_REALTEK
 758 #define CONFIG_PHY_AQUANTIA
 759 #if defined(CONFIG_TARGET_T1024RDB)
 760 #define RGMII_PHY1_ADDR         0x2
 761 #define RGMII_PHY2_ADDR         0x6
 762 #define SGMII_AQR_PHY_ADDR      0x2
 763 #define FM1_10GEC1_PHY_ADDR     0x1
 764 #elif defined(CONFIG_TARGET_T1023RDB)
 765 #define RGMII_PHY1_ADDR         0x1
 766 #define SGMII_RTK_PHY_ADDR      0x3
 767 #define SGMII_AQR_PHY_ADDR      0x2
 768 #endif
 769 #endif
 770
 771 #ifdef CONFIG_FMAN_ENET
 772 #define CONFIG_MII              /* MII PHY management */
 773 #define CONFIG_ETHPRIME         "FM1@DTSEC4"
 774 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 775 #endif
 776
 777 /*
 778  * Dynamic MTD Partition support with mtdparts
 779  */
 780 #ifndef CONFIG_SYS_NO_FLASH
 781 #define CONFIG_MTD_DEVICE
 782 #define CONFIG_MTD_PARTITIONS
 783 #define CONFIG_CMD_MTDPARTS
 784 #define CONFIG_FLASH_CFI_MTD
 785 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 786                         "spi0=spife110000.1"
 787 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 788                         "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
 789                         "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
 790                         "1m(uboot),5m(kernel),128k(dtb),-(user)"
 791 #endif
 792
 793 /*
 794  * Environment
 795  */
 796 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 797 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 798
 799 /*
 800  * Command line configuration.
 801  */
 802 #define CONFIG_CMD_DATE
 803 #define CONFIG_CMD_EEPROM
 804 #define CONFIG_CMD_ERRATA
 805 #define CONFIG_CMD_IRQ
 806 #define CONFIG_CMD_REGINFO
 807
 808 #ifdef CONFIG_PCI
 809 #define CONFIG_CMD_PCI
 810 #endif
 811
 812 /*
 813  * Miscellaneous configurable options
 814  */
 815 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 816 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 817 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 818 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 819 #ifdef CONFIG_CMD_KGDB
 820 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 821 #else
 822 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 823 #endif
 824 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 825 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 826 #define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 827
 828 /*
 829  * For booting Linux, the board info and command line data
 830  * have to be in the first 64 MB of memory, since this is
 831  * the maximum mapped by the Linux kernel during initialization.
 832  */
 833 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 834 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 835
 836 #ifdef CONFIG_CMD_KGDB
 837 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 838 #endif
 839
 840 /*
 841  * Environment Configuration
 842  */
 843 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 844 #define CONFIG_BOOTFILE         "uImage"
 845 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 846 #define CONFIG_LOADADDR         1000000 /* default location for tftp, bootm */
 847 #define CONFIG_BAUDRATE         115200
 848 #define __USB_PHY_TYPE          utmi
 849
 850 #ifdef CONFIG_ARCH_T1024
 851 #define CONFIG_BOARDNAME t1024rdb
 852 #define BANK_INTLV cs0_cs1
 853 #else
 854 #define CONFIG_BOARDNAME t1023rdb
 855 #define BANK_INTLV  null
 856 #endif
 857
 858 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 859         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 860         "bank_intlv=" __stringify(BANK_INTLV) "\0"              \
 861         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"  \
 862         "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
 863         "fdtfile=" __stringify(CONFIG_BOARDNAME) "/"            \
 864         __stringify(CONFIG_BOARDNAME) ".dtb\0"                  \
 865         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 866         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 867         "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
 868         "netdev=eth0\0"                                         \
 869         "tftpflash=tftpboot $loadaddr $uboot && "               \
 870         "protect off $ubootaddr +$filesize && "                 \
 871         "erase $ubootaddr +$filesize && "                       \
 872         "cp.b $loadaddr $ubootaddr $filesize && "               \
 873         "protect on $ubootaddr +$filesize && "                  \
 874         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 875         "consoledev=ttyS0\0"                                    \
 876         "ramdiskaddr=2000000\0"                                 \
 877         "fdtaddr=1e00000\0"                                     \
 878         "bdev=sda3\0"
 879
 880 #define CONFIG_LINUX                                    \
 881         "setenv bootargs root=/dev/ram rw "             \
 882         "console=$consoledev,$baudrate $othbootargs;"   \
 883         "setenv ramdiskaddr 0x02000000;"                \
 884         "setenv fdtaddr 0x00c00000;"                    \
 885         "setenv loadaddr 0x1000000;"                    \
 886         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 887
 888 #define CONFIG_NFSBOOTCOMMAND                   \
 889         "setenv bootargs root=/dev/nfs rw "     \
 890         "nfsroot=$serverip:$rootpath "          \
 891         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 892         "console=$consoledev,$baudrate $othbootargs;"   \
 893         "tftp $loadaddr $bootfile;"             \
 894         "tftp $fdtaddr $fdtfile;"               \
 895         "bootm $loadaddr - $fdtaddr"
 896
 897 #define CONFIG_BOOTCOMMAND      CONFIG_LINUX
 898
 899 /* Hash command with SHA acceleration supported in hardware */
 900 #ifdef CONFIG_FSL_CAAM
 901 #define CONFIG_CMD_HASH
 902 #define CONFIG_SHA_HW_ACCEL
 903 #endif
 904
 905 #include <asm/fsl_secure_boot.h>
 906
 907 #endif  /* __T1024RDB_H */