include/configs/P2041RDB.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   4  */
   5
   6 /*
   7  * P2041 RDB board configuration file
   8  * Also supports P2040 RDB
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #ifdef CONFIG_RAMBOOT_PBL
  14 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  15 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  16 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
  17 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg
  18 #endif
  19
  20 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  21 /* Set 1M boot space */
  22 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  23 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  24                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  25 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  26 #endif
  27
  28 /* High Level Configuration Options */
  29 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  30
  31 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  32 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  33 #endif
  34
  35 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  36 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  37 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  38 #define CONFIG_PCIE2                    /* PCIE controller 2 */
  39 #define CONFIG_PCIE3                    /* PCIE controller 3 */
  40 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  41 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  42
  43 #define CONFIG_SYS_SRIO
  44 #define CONFIG_SRIO1                    /* SRIO port 1 */
  45 #define CONFIG_SRIO2                    /* SRIO port 2 */
  46 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  47 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
  48
  49 #define CONFIG_ENV_OVERWRITE
  50
  51 #if defined(CONFIG_SPIFLASH)
  52         #define CONFIG_ENV_SPI_BUS              0
  53         #define CONFIG_ENV_SPI_CS               0
  54         #define CONFIG_ENV_SPI_MAX_HZ           10000000
  55         #define CONFIG_ENV_SPI_MODE             0
  56         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  57         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  58         #define CONFIG_ENV_SECT_SIZE            0x10000
  59 #elif defined(CONFIG_SDCARD)
  60         #define CONFIG_FSL_FIXED_MMC_LOCATION
  61         #define CONFIG_SYS_MMC_ENV_DEV          0
  62         #define CONFIG_ENV_SIZE                 0x2000
  63         #define CONFIG_ENV_OFFSET               (512 * 1658)
  64 #elif defined(CONFIG_NAND)
  65 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
  66 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
  67 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
  68 #define CONFIG_ENV_ADDR         0xffe20000
  69 #define CONFIG_ENV_SIZE         0x2000
  70 #elif defined(CONFIG_ENV_IS_NOWHERE)
  71 #define CONFIG_ENV_SIZE         0x2000
  72 #else
  73         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
  74                         - CONFIG_ENV_SECT_SIZE)
  75         #define CONFIG_ENV_SIZE         0x2000
  76         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
  77 #endif
  78
  79 #ifndef __ASSEMBLY__
  80 unsigned long get_board_sys_clk(unsigned long dummy);
  81 #endif
  82 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
  83
  84 /*
  85  * These can be toggled for performance analysis, otherwise use default.
  86  */
  87 #define CONFIG_SYS_CACHE_STASHING
  88 #define CONFIG_BACKSIDE_L2_CACHE
  89 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
  90 #define CONFIG_BTB                      /* toggle branch predition */
  91
  92 #define CONFIG_ENABLE_36BIT_PHYS
  93
  94 #ifdef CONFIG_PHYS_64BIT
  95 #define CONFIG_ADDR_MAP
  96 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
  97 #endif
  98
  99 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 100 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 101 #define CONFIG_SYS_MEMTEST_END          0x00400000
 102
 103 /*
 104  *  Config the L3 Cache as L3 SRAM
 105  */
 106 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 107 #ifdef CONFIG_PHYS_64BIT
 108 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
 109                 CONFIG_RAMBOOT_TEXT_BASE)
 110 #else
 111 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 112 #endif
 113 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 114 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 115
 116 #ifdef CONFIG_PHYS_64BIT
 117 #define CONFIG_SYS_DCSRBAR              0xf0000000
 118 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 119 #endif
 120
 121 /* EEPROM */
 122 #define CONFIG_ID_EEPROM
 123 #define CONFIG_SYS_I2C_EEPROM_NXID
 124 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 125 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 126 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 127
 128 /*
 129  * DDR Setup
 130  */
 131 #define CONFIG_VERY_BIG_RAM
 132 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 133 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 134
 135 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 136 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 137
 138 #define CONFIG_DDR_SPD
 139
 140 #define CONFIG_SYS_SPD_BUS_NUM  0
 141 #define SPD_EEPROM_ADDRESS      0x52
 142 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 143
 144 /*
 145  * Local Bus Definitions
 146  */
 147
 148 /* Set the local bus clock 1/8 of platform clock */
 149 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 150
 151 /*
 152  * This board doesn't have a promjet connector.
 153  * However, it uses commone corenet board LAW and TLB.
 154  * It is necessary to use the same start address with proper offset.
 155  */
 156 #define CONFIG_SYS_FLASH_BASE           0xe0000000
 157 #ifdef CONFIG_PHYS_64BIT
 158 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe0000000ull
 159 #else
 160 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 161 #endif
 162
 163 #define CONFIG_SYS_FLASH_BR_PRELIM \
 164                 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \
 165                 BR_PS_16 | BR_V)
 166 #define CONFIG_SYS_FLASH_OR_PRELIM \
 167                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 168                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 169
 170 #define CONFIG_FSL_CPLD
 171 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
 172 #ifdef CONFIG_PHYS_64BIT
 173 #define CPLD_BASE_PHYS          0xfffdf0000ull
 174 #else
 175 #define CPLD_BASE_PHYS          CPLD_BASE
 176 #endif
 177
 178 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
 179 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 180
 181 #define PIXIS_LBMAP_SWITCH      7
 182 #define PIXIS_LBMAP_MASK        0xf0
 183 #define PIXIS_LBMAP_SHIFT       4
 184 #define PIXIS_LBMAP_ALTBANK     0x40
 185
 186 #define CONFIG_SYS_FLASH_QUIET_TEST
 187 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 188
 189 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 190 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 191 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
 192 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
 193
 194 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 195
 196 #if defined(CONFIG_RAMBOOT_PBL)
 197 #define CONFIG_SYS_RAMBOOT
 198 #endif
 199
 200 #define CONFIG_NAND_FSL_ELBC
 201 /* Nand Flash */
 202 #ifdef CONFIG_NAND_FSL_ELBC
 203 #define CONFIG_SYS_NAND_BASE            0xffa00000
 204 #ifdef CONFIG_PHYS_64BIT
 205 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 206 #else
 207 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 208 #endif
 209
 210 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 211 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 212 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 213
 214 /* NAND flash config */
 215 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 216                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 217                                | BR_PS_8               /* Port Size = 8 bit */ \
 218                                | BR_MS_FCM             /* MSEL = FCM */ \
 219                                | BR_V)                 /* valid */
 220 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 221                                | OR_FCM_PGS            /* Large Page*/ \
 222                                | OR_FCM_CSCT \
 223                                | OR_FCM_CST \
 224                                | OR_FCM_CHT \
 225                                | OR_FCM_SCY_1 \
 226                                | OR_FCM_TRLX \
 227                                | OR_FCM_EHTR)
 228
 229 #ifdef CONFIG_NAND
 230 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 231 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 232 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 233 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 234 #else
 235 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 236 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 237 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 238 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 239 #endif
 240 #else
 241 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 242 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 243 #endif /* CONFIG_NAND_FSL_ELBC */
 244
 245 #define CONFIG_SYS_FLASH_EMPTY_INFO
 246 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 247 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 248
 249 #define CONFIG_HWCONFIG
 250
 251 /* define to use L1 as initial stack */
 252 #define CONFIG_L1_INIT_RAM
 253 #define CONFIG_SYS_INIT_RAM_LOCK
 254 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 255 #ifdef CONFIG_PHYS_64BIT
 256 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 257 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 258 /* The assembler doesn't like typecast */
 259 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 260         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 261           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 262 #else
 263 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 264 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 265 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 266 #endif
 267 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 268
 269 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 270                                         GENERATED_GBL_DATA_SIZE)
 271 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 272
 273 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 274 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 275
 276 /* Serial Port - controlled on board with jumper J8
 277  * open - index 2
 278  * shorted - index 1
 279  */
 280 #define CONFIG_SYS_NS16550_SERIAL
 281 #define CONFIG_SYS_NS16550_REG_SIZE     1
 282 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 283
 284 #define CONFIG_SYS_BAUDRATE_TABLE       \
 285         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 286
 287 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 288 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 289 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 290 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 291
 292 /* I2C */
 293 #define CONFIG_SYS_I2C
 294 #define CONFIG_SYS_I2C_FSL
 295 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 296 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 297 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 298 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 299 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 300 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 301
 302 /*
 303  * RapidIO
 304  */
 305 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 306 #ifdef CONFIG_PHYS_64BIT
 307 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 308 #else
 309 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 310 #endif
 311 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 312
 313 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 314 #ifdef CONFIG_PHYS_64BIT
 315 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 316 #else
 317 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 318 #endif
 319 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 320
 321 /*
 322  * for slave u-boot IMAGE instored in master memory space,
 323  * PHYS must be aligned based on the SIZE
 324  */
 325 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 326 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 327 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 328 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 329 /*
 330  * for slave UCODE and ENV instored in master memory space,
 331  * PHYS must be aligned based on the SIZE
 332  */
 333 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 334 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 335 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 336
 337 /* slave core release by master*/
 338 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 339 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 340
 341 /*
 342  * SRIO_PCIE_BOOT - SLAVE
 343  */
 344 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 345 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 346 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 347                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 348 #endif
 349
 350 /*
 351  * eSPI - Enhanced SPI
 352  */
 353
 354 /*
 355  * General PCI
 356  * Memory space is mapped 1-1, but I/O space must start from 0.
 357  */
 358
 359 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 360 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 361 #ifdef CONFIG_PHYS_64BIT
 362 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 363 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 364 #else
 365 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 366 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 367 #endif
 368 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 369 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 370 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 371 #ifdef CONFIG_PHYS_64BIT
 372 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 373 #else
 374 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 375 #endif
 376 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 377
 378 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 379 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 380 #ifdef CONFIG_PHYS_64BIT
 381 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 382 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 383 #else
 384 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 385 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 386 #endif
 387 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 388 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 389 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 390 #ifdef CONFIG_PHYS_64BIT
 391 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 392 #else
 393 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 394 #endif
 395 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 396
 397 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 398 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 399 #ifdef CONFIG_PHYS_64BIT
 400 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 401 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 402 #else
 403 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 404 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 405 #endif
 406 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 407 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 408 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 409 #ifdef CONFIG_PHYS_64BIT
 410 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 411 #else
 412 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 413 #endif
 414 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 415
 416 /* Qman/Bman */
 417 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 418 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 419 #ifdef CONFIG_PHYS_64BIT
 420 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 421 #else
 422 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 423 #endif
 424 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 425 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 426 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 427 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 428 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 429 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 430                                         CONFIG_SYS_BMAN_CENA_SIZE)
 431 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 432 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 433 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 434 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 435 #ifdef CONFIG_PHYS_64BIT
 436 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 437 #else
 438 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 439 #endif
 440 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 441 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 442 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 443 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 444 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 445 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 446                                         CONFIG_SYS_QMAN_CENA_SIZE)
 447 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 448 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 449
 450 #define CONFIG_SYS_DPAA_FMAN
 451 #define CONFIG_SYS_DPAA_PME
 452 /* Default address of microcode for the Linux Fman driver */
 453 #if defined(CONFIG_SPIFLASH)
 454 /*
 455  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 456  * env, so we got 0x110000.
 457  */
 458 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 459 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 460 #elif defined(CONFIG_SDCARD)
 461 /*
 462  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 463  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 464  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 465  */
 466 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 467 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 468 #elif defined(CONFIG_NAND)
 469 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 470 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 471 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 472 /*
 473  * Slave has no ucode locally, it can fetch this from remote. When implementing
 474  * in two corenet boards, slave's ucode could be stored in master's memory
 475  * space, the address can be mapped from slave TLB->slave LAW->
 476  * slave SRIO or PCIE outbound window->master inbound window->
 477  * master LAW->the ucode address in master's memory space.
 478  */
 479 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 480 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 481 #else
 482 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 483 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 484 #endif
 485 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 486 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 487
 488 #ifdef CONFIG_SYS_DPAA_FMAN
 489 #define CONFIG_FMAN_ENET
 490 #define CONFIG_PHYLIB_10G
 491 #define CONFIG_PHY_VITESSE
 492 #define CONFIG_PHY_TERANETICS
 493 #endif
 494
 495 #ifdef CONFIG_PCI
 496 #define CONFIG_PCI_INDIRECT_BRIDGE
 497
 498 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 499 #endif  /* CONFIG_PCI */
 500
 501 /* SATA */
 502 #define CONFIG_FSL_SATA_V2
 503
 504 #ifdef CONFIG_FSL_SATA_V2
 505 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 506 #define CONFIG_SATA1
 507 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 508 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 509 #define CONFIG_SATA2
 510 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 511 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 512
 513 #define CONFIG_LBA48
 514 #endif
 515
 516 #ifdef CONFIG_FMAN_ENET
 517 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
 518 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
 519 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
 520 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
 521 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
 522
 523 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 524 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 525 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 526 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 527
 528 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
 529
 530 #define CONFIG_SYS_TBIPA_VALUE  8
 531 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 532 #endif
 533
 534 /*
 535  * Environment
 536  */
 537 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 538 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 539
 540 /*
 541  * Command line configuration.
 542  */
 543
 544 /*
 545 * USB
 546 */
 547 #define CONFIG_HAS_FSL_DR_USB
 548 #define CONFIG_HAS_FSL_MPH_USB
 549
 550 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 551 #define CONFIG_USB_EHCI_FSL
 552 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 553 #endif
 554
 555 #ifdef CONFIG_MMC
 556 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 557 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 558 #endif
 559
 560 /*
 561  * Miscellaneous configurable options
 562  */
 563 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 564
 565 /*
 566  * For booting Linux, the board info and command line data
 567  * have to be in the first 64 MB of memory, since this is
 568  * the maximum mapped by the Linux kernel during initialization.
 569  */
 570 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
 571 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 572
 573 #ifdef CONFIG_CMD_KGDB
 574 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 575 #endif
 576
 577 /*
 578  * Environment Configuration
 579  */
 580 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 581 #define CONFIG_BOOTFILE         "uImage"
 582 #define CONFIG_UBOOTPATH        u-boot.bin
 583
 584 /* default location for tftp and bootm */
 585 #define CONFIG_LOADADDR         1000000
 586
 587 #define __USB_PHY_TYPE  utmi
 588
 589 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 590         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 591         "bank_intlv=cs0_cs1\0"                                  \
 592         "netdev=eth0\0"                                         \
 593         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 594         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"             \
 595         "tftpflash=tftpboot $loadaddr $uboot && "               \
 596         "protect off $ubootaddr +$filesize && "                 \
 597         "erase $ubootaddr +$filesize && "                       \
 598         "cp.b $loadaddr $ubootaddr $filesize && "               \
 599         "protect on $ubootaddr +$filesize && "                  \
 600         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 601         "consoledev=ttyS0\0"                                    \
 602         "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
 603         "usb_dr_mode=host\0"                                    \
 604         "ramdiskaddr=2000000\0"                                 \
 605         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
 606         "fdtaddr=1e00000\0"                                     \
 607         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
 608         "bdev=sda3\0"
 609
 610 #define CONFIG_HDBOOT                                   \
 611         "setenv bootargs root=/dev/$bdev rw "           \
 612         "console=$consoledev,$baudrate $othbootargs;"   \
 613         "tftp $loadaddr $bootfile;"                     \
 614         "tftp $fdtaddr $fdtfile;"                       \
 615         "bootm $loadaddr - $fdtaddr"
 616
 617 #define CONFIG_NFSBOOTCOMMAND                   \
 618         "setenv bootargs root=/dev/nfs rw "     \
 619         "nfsroot=$serverip:$rootpath "          \
 620         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 621         "console=$consoledev,$baudrate $othbootargs;"   \
 622         "tftp $loadaddr $bootfile;"             \
 623         "tftp $fdtaddr $fdtfile;"               \
 624         "bootm $loadaddr - $fdtaddr"
 625
 626 #define CONFIG_RAMBOOTCOMMAND                           \
 627         "setenv bootargs root=/dev/ram rw "             \
 628         "console=$consoledev,$baudrate $othbootargs;"   \
 629         "tftp $ramdiskaddr $ramdiskfile;"               \
 630         "tftp $loadaddr $bootfile;"                     \
 631         "tftp $fdtaddr $fdtfile;"                       \
 632         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 633
 634 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 635
 636 #include <asm/fsl_secure_boot.h>
 637
 638 #endif  /* __CONFIG_H */