include/configs/P1023RDB.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Authors:  Roy Zang <tie-fei.zang@freescale.com>
   5  *           Chunhe Lan <Chunhe.Lan@freescale.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_SYS_GENERIC_BOARD
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #ifndef CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  18 #endif
  19
  20 #ifndef CONFIG_SYS_MONITOR_BASE
  21 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  22 #endif
  23
  24 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  25 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  26 #endif
  27
  28 /* High Level Configuration Options */
  29 #define CONFIG_BOOKE            /* BOOKE */
  30 #define CONFIG_E500             /* BOOKE e500 family */
  31 #define CONFIG_P1023
  32 #define CONFIG_MP               /* support multiple processors */
  33
  34 #define CONFIG_FSL_ELBC         /* Has Enhanced localbus controller */
  35 #define CONFIG_PCI              /* Enable PCI/PCIE */
  36 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
  37 #define CONFIG_PCIE1            /* PCIE controler 1 (slot 1) */
  38 #define CONFIG_PCIE2            /* PCIE controler 2 (slot 2) */
  39 #define CONFIG_PCIE3            /* PCIE controler 3 (slot 3) */
  40 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
  41 #define CONFIG_FSL_PCIE_RESET   /* need PCIe reset errata */
  42 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
  43 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  44
  45 #ifndef __ASSEMBLY__
  46 extern unsigned long get_clock_freq(void);
  47 #endif
  48
  49 #define CONFIG_SYS_CLK_FREQ     66666666
  50 #define CONFIG_DDR_CLK_FREQ     CONFIG_SYS_CLK_FREQ
  51
  52 /*
  53  * These can be toggled for performance analysis, otherwise use default.
  54  */
  55 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  56 #define CONFIG_BTB                      /* toggle branch predition */
  57 #define CONFIG_HWCONFIG
  58
  59 #define CONFIG_ENABLE_36BIT_PHYS
  60
  61 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
  62 #define CONFIG_SYS_MEMTEST_END          0x02000000
  63
  64 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  65
  66 /* Implement conversion of addresses in the LBC */
  67 #define CONFIG_SYS_LBC_LBCR             0x00000000
  68 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
  69
  70 /* DDR Setup */
  71 #define CONFIG_VERY_BIG_RAM
  72 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  73 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  74
  75 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  76 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  77
  78 #define CONFIG_DDR_SPD
  79 #define CONFIG_SYS_FSL_DDR3
  80 #define CONFIG_FSL_DDR_INTERACTIVE
  81 #define CONFIG_SYS_SDRAM_SIZE           512u    /* DDR is 512M */
  82 #define CONFIG_SYS_SPD_BUS_NUM          0
  83 #define SPD_EEPROM_ADDRESS              0x50
  84 #define CONFIG_SYS_DDR_RAW_TIMING
  85
  86 /*
  87  * Memory map
  88  *
  89  * 0x0000_0000  0x1fff_ffff     DDR                     512M cacheable
  90  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1G non-cacheable
  91  * 0xc000_0000  0xdfff_ffff     PCI                     512M non-cacheable
  92  * 0xe100_0000  0xe3ff_ffff     PCI IO range            4M non-cacheable
  93  * 0xff00_0000  0xff3f_ffff     DPAA_QBMAN              4M cacheable
  94  * 0xff60_0000  0xff7f_ffff     CCSR                    2M non-cacheable
  95  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K cacheable TLB0
  96  *
  97  * Localbus non-cacheable
  98  *
  99  * 0xec00_0000  0xefff_ffff     NOR flash               64M non-cacheable
 100  * 0xffa0_0000  0xffaf_ffff     NAND                    1M non-cacheable
 101  */
 102
 103 /*
 104  * Local Bus Definitions
 105  */
 106 #define CONFIG_SYS_FLASH_BASE           0xec000000 /* start of FLASH 64M */
 107 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 108
 109 #define CONFIG_FLASH_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 110                                 | BR_PS_16 | BR_V)
 111 #define CONFIG_FLASH_OR_PRELIM  0xfc000ff7
 112
 113 #define CONFIG_FLASH_CFI_DRIVER
 114 #define CONFIG_SYS_FLASH_CFI
 115 #define CONFIG_SYS_FLASH_EMPTY_INFO
 116 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 117 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* sectors per device */
 118 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 119 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 120
 121 #define CONFIG_BOARD_EARLY_INIT_F       /* call board_early_init_f function */
 122 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 123
 124 #define CONFIG_SYS_INIT_RAM_LOCK
 125 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 126 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000/* Size of used area in RAM */
 127 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 128                                         GENERATED_GBL_DATA_SIZE)
 129 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 130
 131 #define CONFIG_SYS_MONITOR_LEN  (768 * 1024)      /* Reserve 512 kB for Mon */
 132 #define CONFIG_SYS_MALLOC_LEN   (6 * 1024 * 1024) /* Reserved for malloc */
 133
 134 #define CONFIG_SYS_NAND_BASE            0xffa00000
 135 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 136
 137 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 138 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 139 #define CONFIG_CMD_NAND
 140 #define CONFIG_NAND_FSL_ELBC
 141 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 142
 143 /* NAND flash config */
 144 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 145                                 | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 146                                 | BR_PS_8               /* Port Size = 8bit */ \
 147                                 | BR_MS_FCM             /* MSEL = FCM */ \
 148                                 | BR_V)                 /* valid */
 149 #define CONFIG_SYS_NAND_OR_PRELIM  (OR_AM_256KB         /* length 256K */ \
 150                                 | OR_FCM_PGS \
 151                                 | OR_FCM_CSCT \
 152                                 | OR_FCM_CST \
 153                                 | OR_FCM_CHT \
 154                                 | OR_FCM_SCY_1 \
 155                                 | OR_FCM_TRLX \
 156                                 | OR_FCM_EHTR)
 157
 158 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 159 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 160 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM
 161 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 162
 163 /* Serial Port */
 164 #define CONFIG_CONS_INDEX               1
 165 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 166 #define CONFIG_SYS_NS16550
 167 #define CONFIG_SYS_NS16550_SERIAL
 168 #define CONFIG_SYS_NS16550_REG_SIZE     1
 169 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 170
 171 #define CONFIG_SYS_BAUDRATE_TABLE       \
 172         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 173
 174 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 175 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 176
 177 /* Use the HUSH parser */
 178 #define CONFIG_SYS_HUSH_PARSER
 179
 180 /*
 181  * Pass open firmware flat tree
 182  */
 183 #define CONFIG_OF_LIBFDT
 184 #define CONFIG_OF_BOARD_SETUP
 185 #define CONFIG_OF_STDOUT_VIA_ALIAS
 186
 187 /* new uImage format support */
 188 #define CONFIG_FIT
 189 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 190
 191 /* I2C */
 192 #define CONFIG_SYS_I2C
 193 #define CONFIG_SYS_I2C_FSL
 194 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 195 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 196 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 197 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 198 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 199 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 200
 201 /*
 202  * I2C2 EEPROM
 203  */
 204 #define CONFIG_ID_EEPROM
 205 #ifdef CONFIG_ID_EEPROM
 206 #define CONFIG_SYS_I2C_EEPROM_NXID
 207 #endif
 208 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 209 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 210 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 211
 212 #define CONFIG_CMD_I2C
 213
 214 /*
 215  * General PCI
 216  * Memory space is mapped 1-1, but I/O space must start from 0.
 217  */
 218
 219 /* controller 3, Slot 1, tgtid 3, Base address b000 */
 220 #define CONFIG_SYS_PCIE3_NAME           "Slot 3"
 221 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 222 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 223 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 224 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 225 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 226 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 227 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 228 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 229
 230 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 231 #define CONFIG_SYS_PCIE2_NAME           "Slot 2"
 232 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 233 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 234 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 235 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 236 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 237 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 238 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 239 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 240
 241 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 242 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
 243 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 244 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 245 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 246 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 247 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 248 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 249 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 250 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 251
 252 #if defined(CONFIG_PCI)
 253 #define CONFIG_E1000            /* Defind e1000 pci Ethernet card */
 254 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 255 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 256 #endif  /* CONFIG_PCI */
 257
 258 /*
 259  * Environment
 260  */
 261 #define CONFIG_ENV_OVERWRITE
 262
 263 #define CONFIG_ENV_IS_IN_FLASH
 264 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 265 #define CONFIG_ENV_SIZE         0x2000
 266 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 267
 268 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 269 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 270
 271 /*
 272  * Command line configuration.
 273  */
 274 #include <config_cmd_default.h>
 275
 276 #define CONFIG_CMD_IRQ
 277 #define CONFIG_CMD_PING
 278 #define CONFIG_CMD_MII
 279 #define CONFIG_CMD_SETEXPR
 280 #define CONFIG_CMD_REGINFO
 281
 282 #if defined(CONFIG_PCI)
 283 #define CONFIG_CMD_PCI
 284 #define CONFIG_CMD_NET
 285 #endif
 286
 287 /*
 288  * USB
 289  */
 290 #define CONFIG_HAS_FSL_DR_USB
 291 #ifdef CONFIG_HAS_FSL_DR_USB
 292 #define CONFIG_USB_EHCI
 293
 294 #ifdef CONFIG_USB_EHCI
 295 #define CONFIG_CMD_USB
 296 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 297 #define CONFIG_USB_EHCI_FSL
 298 #define CONFIG_USB_STORAGE
 299 #define CONFIG_CMD_FAT
 300 #define CONFIG_CMD_EXT2
 301 #define CONFIG_CMD_FAT
 302 #define CONFIG_DOS_PARTITION
 303 #endif
 304 #endif
 305
 306 /*
 307  * Miscellaneous configurable options
 308  */
 309 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 310 #define CONFIG_CMDLINE_EDITING          /* Command-line editing */
 311 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 312 #if defined(CONFIG_CMD_KGDB)
 313 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 314 #else
 315 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 316 #endif
 317 /* Print Buffer Size */
 318 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
 319 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 320 /* Boot Argument Buffer Size */
 321 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 322
 323 /*
 324  * For booting Linux, the board info and command line data
 325  * have to be in the first 64 MB of memory, since this is
 326  * the maximum mapped by the Linux kernel during initialization.
 327  */
 328 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)   /* Initial Memory map for Linux*/
 329 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)   /* Increase max gunzip size */
 330
 331 /*
 332  * Environment Configuration
 333  */
 334 #define CONFIG_BOOTFILE         "uImage"
 335 #define CONFIG_UBOOTPATH        (u-boot.bin) /* U-Boot image on TFTP server */
 336
 337 /* default location for tftp and bootm */
 338 #define CONFIG_LOADADDR         1000000
 339
 340 #define CONFIG_BOOTDELAY -1     /* -1 disables auto-boot */
 341
 342 #define CONFIG_BAUDRATE 115200
 343
 344 /* Qman/Bman */
 345 #define CONFIG_SYS_DPAA_QBMAN           /* support Q/Bman */
 346 #define CONFIG_SYS_QMAN_MEM_BASE        0xff000000
 347 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 348 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 349 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 350 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 351 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 352 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 353 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 354                                         CONFIG_SYS_QMAN_CENA_SIZE)
 355 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 356 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 357 #define CONFIG_SYS_BMAN_MEM_BASE        0xff200000
 358 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 359 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 360 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 361 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 362 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 363 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 364 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 365                                         CONFIG_SYS_BMAN_CENA_SIZE)
 366 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 367 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 368
 369 /* For FM */
 370 #define CONFIG_SYS_DPAA_FMAN
 371 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 372
 373 #ifdef CONFIG_SYS_DPAA_FMAN
 374 #define CONFIG_FMAN_ENET
 375 #define CONFIG_PHY_ATHEROS
 376 #endif
 377
 378 /* Default address of microcode for the Linux Fman driver */
 379 /* QE microcode/firmware address */
 380 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 381 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
 382 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 383 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 384
 385 #ifdef CONFIG_FMAN_ENET
 386 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x1
 387 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x2
 388
 389 #define CONFIG_SYS_TBIPA_VALUE  8
 390 #define CONFIG_MII              /* MII PHY management */
 391 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 392 #endif
 393
 394 #define CONFIG_EXTRA_ENV_SETTINGS       \
 395         "netdev=eth0\0"                                         \
 396         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 397         "loadaddr=1000000\0"                                    \
 398         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 399         "tftpflash=tftpboot $loadaddr $uboot; "                 \
 400                 "protect off $ubootaddr +$filesize; "           \
 401                 "erase $ubootaddr +$filesize; "                 \
 402                 "cp.b $loadaddr $ubootaddr $filesize; "         \
 403                 "protect on $ubootaddr +$filesize; "            \
 404                 "cmp.b $loadaddr $ubootaddr $filesize\0"        \
 405         "consoledev=ttyS0\0"                                    \
 406         "ramdiskaddr=2000000\0"                                 \
 407         "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
 408         "fdtaddr=c00000\0"                                      \
 409         "fdtfile=p1023rdb.dtb\0"                                \
 410         "othbootargs=ramdisk_size=600000\0"                     \
 411         "bdev=sda1\0"                                           \
 412         "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 413
 414 #define CONFIG_HDBOOT                                   \
 415         "setenv bootargs root=/dev/$bdev rw "           \
 416         "console=$consoledev,$baudrate $othbootargs;"   \
 417         "tftp $loadaddr $bootfile;"                     \
 418         "tftp $fdtaddr $fdtfile;"                       \
 419         "bootm $loadaddr - $fdtaddr"
 420
 421 #define CONFIG_NFSBOOTCOMMAND                                           \
 422         "setenv bootargs root=/dev/nfs rw "                             \
 423         "nfsroot=$serverip:$rootpath "                                  \
 424         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 425         "console=$consoledev,$baudrate $othbootargs;"                   \
 426         "tftp $loadaddr $bootfile;"                                     \
 427         "tftp $fdtaddr $fdtfile;"                                       \
 428         "bootm $loadaddr - $fdtaddr"
 429
 430 #define CONFIG_RAMBOOTCOMMAND                                           \
 431         "setenv bootargs root=/dev/ram rw "                             \
 432         "console=$consoledev,$baudrate $othbootargs;"                   \
 433         "tftp $ramdiskaddr $ramdiskfile;"                               \
 434         "tftp $loadaddr $bootfile;"                                     \
 435         "tftp $fdtaddr $fdtfile;"                                       \
 436         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 437
 438 #define CONFIG_BOOTCOMMAND              CONFIG_RAMBOOTCOMMAND
 439
 440 #endif  /* __CONFIG_H */