include/configs/P1010RDB.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P010 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #define CONFIG_P1010
  17 #define CONFIG_E500                     /* BOOKE e500 family */
  18 #include <asm/config_mpc85xx.h>
  19 #define CONFIG_NAND_FSL_IFC
  20
  21 #ifdef CONFIG_SDCARD
  22 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  23 #define CONFIG_SPL_SERIAL_SUPPORT
  24 #define CONFIG_SPL_MMC_SUPPORT
  25 #define CONFIG_SPL_MMC_MINIMAL
  26 #define CONFIG_SPL_FLUSH_IMAGE
  27 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  28 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  29 #define CONFIG_SYS_TEXT_BASE            0x11001000
  30 #define CONFIG_SPL_TEXT_BASE            0xD0001000
  31 #define CONFIG_SPL_PAD_TO               0x18000
  32 #define CONFIG_SPL_MAX_SIZE             (96 * 1024)
  33 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  34 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  35 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  36 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  37 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  38 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  39 #define CONFIG_SPL_MMC_BOOT
  40 #ifdef CONFIG_SPL_BUILD
  41 #define CONFIG_SPL_COMMON_INIT_DDR
  42 #endif
  43 #endif
  44
  45 #ifdef CONFIG_SPIFLASH
  46 #ifdef CONFIG_SECURE_BOOT
  47 #define CONFIG_RAMBOOT_SPIFLASH
  48 #define CONFIG_SYS_TEXT_BASE            0x11000000
  49 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  50 #else
  51 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  52 #define CONFIG_SPL_SERIAL_SUPPORT
  53 #define CONFIG_SPL_SPI_SUPPORT
  54 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  55 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  56 #define CONFIG_SPL_FLUSH_IMAGE
  57 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  58 #define CONFIG_FSL_LAW         /* Use common FSL init code */
  59 #define CONFIG_SYS_TEXT_BASE                    0x11001000
  60 #define CONFIG_SPL_TEXT_BASE                    0xD0001000
  61 #define CONFIG_SPL_PAD_TO                       0x18000
  62 #define CONFIG_SPL_MAX_SIZE                     (96 * 1024)
  63 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  64 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  65 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  66 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  67 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  68 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  69 #define CONFIG_SPL_SPI_BOOT
  70 #ifdef CONFIG_SPL_BUILD
  71 #define CONFIG_SPL_COMMON_INIT_DDR
  72 #endif
  73 #endif
  74 #endif
  75
  76 #ifdef CONFIG_NAND
  77 #ifdef CONFIG_SECURE_BOOT
  78 #define CONFIG_SPL_INIT_MINIMAL
  79 #define CONFIG_SPL_SERIAL_SUPPORT
  80 #define CONFIG_SPL_NAND_SUPPORT
  81 #define CONFIG_SPL_NAND_BOOT
  82 #define CONFIG_SPL_FLUSH_IMAGE
  83 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  84
  85 #define CONFIG_SYS_TEXT_BASE            0x00201000
  86 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  87 #define CONFIG_SPL_MAX_SIZE             8192
  88 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  89 #define CONFIG_SPL_RELOC_STACK          0x00100000
  90 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  91 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  92 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  93 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  94 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  95 #else
  96 #ifdef CONFIG_TPL_BUILD
  97 #define CONFIG_SPL_NAND_BOOT
  98 #define CONFIG_SPL_FLUSH_IMAGE
  99 #define CONFIG_SPL_NAND_INIT
 100 #define CONFIG_TPL_SERIAL_SUPPORT
 101 #define CONFIG_TPL_NAND_SUPPORT
 102 #define CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT
 103 #define CONFIG_SPL_COMMON_INIT_DDR
 104 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 105 #define CONFIG_SPL_TEXT_BASE            0xD0001000
 106 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 107 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
 108 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 109 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 110 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 111 #elif defined(CONFIG_SPL_BUILD)
 112 #define CONFIG_SPL_INIT_MINIMAL
 113 #define CONFIG_SPL_SERIAL_SUPPORT
 114 #define CONFIG_SPL_NAND_SUPPORT
 115 #define CONFIG_SPL_NAND_MINIMAL
 116 #define CONFIG_SPL_FLUSH_IMAGE
 117 #define CONFIG_SPL_TEXT_BASE            0xff800000
 118 #define CONFIG_SPL_MAX_SIZE             8192
 119 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 120 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
 121 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
 122 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 123 #endif
 124 #define CONFIG_SPL_PAD_TO       0x20000
 125 #define CONFIG_TPL_PAD_TO       0x20000
 126 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
 127 #define CONFIG_SYS_TEXT_BASE    0x11001000
 128 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 129 #endif
 130 #endif
 131
 132 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
 133 #define CONFIG_RAMBOOT_NAND
 134 #define CONFIG_SYS_TEXT_BASE            0x11000000
 135 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
 136 #endif
 137
 138 #ifndef CONFIG_SYS_TEXT_BASE
 139 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 140 #endif
 141
 142 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 143 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 144 #endif
 145
 146 #ifdef CONFIG_SPL_BUILD
 147 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 148 #else
 149 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 150 #endif
 151
 152 /* High Level Configuration Options */
 153 #define CONFIG_BOOKE                    /* BOOKE */
 154 #define CONFIG_E500                     /* BOOKE e500 family */
 155 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 156 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 157 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
 158
 159 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 160 #if defined(CONFIG_PCI)
 161 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 162 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
 163 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 164 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 165 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 166 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 167
 168 #define CONFIG_CMD_PCI
 169
 170 /*
 171  * PCI Windows
 172  * Memory space is mapped 1-1, but I/O space must start from 0.
 173  */
 174 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 175 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe Slot"
 176 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 177 #ifdef CONFIG_PHYS_64BIT
 178 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 179 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 180 #else
 181 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 182 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 183 #endif
 184 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 185 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 186 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 187 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 188 #ifdef CONFIG_PHYS_64BIT
 189 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 190 #else
 191 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 192 #endif
 193
 194 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 195 #if defined(CONFIG_P1010RDB_PA)
 196 #define CONFIG_SYS_PCIE2_NAME           "PCIe Slot"
 197 #elif defined(CONFIG_P1010RDB_PB)
 198 #define CONFIG_SYS_PCIE2_NAME           "mini PCIe Slot"
 199 #endif
 200 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 201 #ifdef CONFIG_PHYS_64BIT
 202 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 203 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 204 #else
 205 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 206 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 207 #endif
 208 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 209 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 210 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 211 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 212 #ifdef CONFIG_PHYS_64BIT
 213 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 214 #else
 215 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 216 #endif
 217
 218 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 219
 220 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 221 #define CONFIG_DOS_PARTITION
 222 #endif
 223
 224 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 225 #define CONFIG_TSEC_ENET
 226 #define CONFIG_ENV_OVERWRITE
 227
 228 #define CONFIG_DDR_CLK_FREQ     66666666 /* DDRCLK on P1010 RDB */
 229 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for P1010 RDB */
 230
 231 #define CONFIG_MISC_INIT_R
 232 #define CONFIG_HWCONFIG
 233 /*
 234  * These can be toggled for performance analysis, otherwise use default.
 235  */
 236 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 237 #define CONFIG_BTB                      /* toggle branch predition */
 238
 239 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
 240
 241 #define CONFIG_ENABLE_36BIT_PHYS
 242
 243 #ifdef CONFIG_PHYS_64BIT
 244 #define CONFIG_ADDR_MAP                 1
 245 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 246 #endif
 247
 248 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 249 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 250 #define CONFIG_PANIC_HANG               /* do not reset board on panic */
 251
 252 /* DDR Setup */
 253 #define CONFIG_SYS_FSL_DDR3
 254 #define CONFIG_SYS_DDR_RAW_TIMING
 255 #define CONFIG_DDR_SPD
 256 #define CONFIG_SYS_SPD_BUS_NUM          1
 257 #define SPD_EEPROM_ADDRESS              0x52
 258
 259 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 260
 261 #ifndef __ASSEMBLY__
 262 extern unsigned long get_sdram_size(void);
 263 #endif
 264 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 265 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 266 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 267
 268 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 269 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 270
 271 /* DDR3 Controller Settings */
 272 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 273 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 274 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 275 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 276 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 277 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 278 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 279 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 280 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 281 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 282 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 283 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 284 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 285 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 286 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 287
 288 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 289 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 290 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 291 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 292 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 293 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 294 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 295 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 296 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 297
 298 /* settings for DDR3 at 667MT/s */
 299 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 300 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 301 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 302 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 303 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 304 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 305 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 306 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 307 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 308
 309 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 310 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 311
 312 /* Don't relocate CCSRBAR while in NAND_SPL */
 313 #ifdef CONFIG_SPL_BUILD
 314 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 315 #endif
 316
 317 /*
 318  * Memory map
 319  *
 320  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 321  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 322  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 323  *
 324  * Localbus non-cacheable
 325  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 326  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 327  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 328  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 329  */
 330
 331 /*
 332  * IFC Definitions
 333  */
 334 /* NOR Flash on IFC */
 335 #ifdef CONFIG_SPL_BUILD
 336 #define CONFIG_SYS_NO_FLASH
 337 #endif
 338
 339 #define CONFIG_SYS_FLASH_BASE           0xee000000
 340 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 341
 342 #ifdef CONFIG_PHYS_64BIT
 343 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 344 #else
 345 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 346 #endif
 347
 348 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 349                                 CSPR_PORT_SIZE_16 | \
 350                                 CSPR_MSEL_NOR | \
 351                                 CSPR_V)
 352 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 353 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 354 /* NOR Flash Timing Params */
 355 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 356                                 FTIM0_NOR_TEADC(0x5) | \
 357                                 FTIM0_NOR_TEAHC(0x5)
 358 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 359                                 FTIM1_NOR_TRAD_NOR(0x0f)
 360 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 361                                 FTIM2_NOR_TCH(0x4) | \
 362                                 FTIM2_NOR_TWP(0x1c)
 363 #define CONFIG_SYS_NOR_FTIM3    0x0
 364
 365 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 366 #define CONFIG_SYS_FLASH_QUIET_TEST
 367 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 368 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 369
 370 #undef CONFIG_SYS_FLASH_CHECKSUM
 371 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 372 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 373
 374 /* CFI for NOR Flash */
 375 #define CONFIG_FLASH_CFI_DRIVER
 376 #define CONFIG_SYS_FLASH_CFI
 377 #define CONFIG_SYS_FLASH_EMPTY_INFO
 378 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 379
 380 /* NAND Flash on IFC */
 381 #define CONFIG_SYS_NAND_BASE            0xff800000
 382 #ifdef CONFIG_PHYS_64BIT
 383 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 384 #else
 385 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 386 #endif
 387
 388 #define CONFIG_MTD_DEVICE
 389 #define CONFIG_MTD_PARTITION
 390 #define CONFIG_CMD_MTDPARTS
 391 #define MTDIDS_DEFAULT                  "nand0=ff800000.flash"
 392 #define MTDPARTS_DEFAULT                \
 393         "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 394
 395 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 396                                 | CSPR_PORT_SIZE_8      \
 397                                 | CSPR_MSEL_NAND        \
 398                                 | CSPR_V)
 399 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 400
 401 #if defined(CONFIG_P1010RDB_PA)
 402 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 403                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 404                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 405                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 406                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 407                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 408                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 409 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 410
 411 #elif defined(CONFIG_P1010RDB_PB)
 412 #define CONFIG_SYS_NAND_ONFI_DETECTION
 413 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 414                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 415                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 416                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 417                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 418                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 419                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 420 #define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 421 #endif
 422
 423 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 424 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 425 #define CONFIG_CMD_NAND
 426
 427 #if defined(CONFIG_P1010RDB_PA)
 428 /* NAND Flash Timing Params */
 429 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 430                                         FTIM0_NAND_TWP(0x0C)   | \
 431                                         FTIM0_NAND_TWCHT(0x04) | \
 432                                         FTIM0_NAND_TWH(0x05)
 433 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 434                                         FTIM1_NAND_TWBE(0x1d)  | \
 435                                         FTIM1_NAND_TRR(0x07)   | \
 436                                         FTIM1_NAND_TRP(0x0c)
 437 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 438                                         FTIM2_NAND_TREH(0x05) | \
 439                                         FTIM2_NAND_TWHRE(0x0f)
 440 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 441
 442 #elif defined(CONFIG_P1010RDB_PB)
 443 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 444 /* ONFI NAND Flash mode0 Timing Params */
 445 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 446                                         FTIM0_NAND_TWP(0x18)   | \
 447                                         FTIM0_NAND_TWCHT(0x07) | \
 448                                         FTIM0_NAND_TWH(0x0a))
 449 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 450                                         FTIM1_NAND_TWBE(0x39)  | \
 451                                         FTIM1_NAND_TRR(0x0e)   | \
 452                                         FTIM1_NAND_TRP(0x18))
 453 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 454                                         FTIM2_NAND_TREH(0x0a)  | \
 455                                         FTIM2_NAND_TWHRE(0x1e))
 456 #define CONFIG_SYS_NAND_FTIM3   0x0
 457 #endif
 458
 459 #define CONFIG_SYS_NAND_DDR_LAW         11
 460
 461 /* Set up IFC registers for boot location NOR/NAND */
 462 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 463 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 464 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 465 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 466 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 467 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 468 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 469 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 470 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 471 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 472 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 473 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 474 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 475 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 476 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 477 #else
 478 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 479 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 480 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 481 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 482 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 483 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 484 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 485 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 486 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 487 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 488 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 489 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 490 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 491 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 492 #endif
 493
 494 /* CPLD on IFC */
 495 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 496
 497 #ifdef CONFIG_PHYS_64BIT
 498 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 499 #else
 500 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 501 #endif
 502
 503 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 504                                 | CSPR_PORT_SIZE_8 \
 505                                 | CSPR_MSEL_GPCM \
 506                                 | CSPR_V)
 507 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 508 #define CONFIG_SYS_CSOR3                0x0
 509 /* CPLD Timing parameters for IFC CS3 */
 510 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 511                                         FTIM0_GPCM_TEADC(0x0e) | \
 512                                         FTIM0_GPCM_TEAHC(0x0e))
 513 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 514                                         FTIM1_GPCM_TRAD(0x1f))
 515 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 516                                         FTIM2_GPCM_TCH(0x8) | \
 517                                         FTIM2_GPCM_TWP(0x1f))
 518 #define CONFIG_SYS_CS3_FTIM3            0x0
 519
 520 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 521         defined(CONFIG_RAMBOOT_NAND)
 522 #define CONFIG_SYS_RAMBOOT
 523 #define CONFIG_SYS_EXTRA_ENV_RELOC
 524 #else
 525 #undef CONFIG_SYS_RAMBOOT
 526 #endif
 527
 528 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 529 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
 530 #define CONFIG_A003399_NOR_WORKAROUND
 531 #endif
 532 #endif
 533
 534 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 535 #define CONFIG_BOARD_EARLY_INIT_R
 536
 537 #define CONFIG_SYS_INIT_RAM_LOCK
 538 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 539 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 540
 541 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 542                                                 - GENERATED_GBL_DATA_SIZE)
 543 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 544
 545 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 546 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 547
 548 /*
 549  * Config the L2 Cache as L2 SRAM
 550  */
 551 #if defined(CONFIG_SPL_BUILD)
 552 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 553 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 554 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 555 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 556 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 557 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 558 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 559 #define CONFIG_SPL_RELOC_STACK_SIZE     (16 << 10)
 560 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 561 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (128 << 10)
 562 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
 563 #elif defined(CONFIG_NAND)
 564 #ifdef CONFIG_TPL_BUILD
 565 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 566 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 567 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 568 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 569 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 570 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 571 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 572 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 573 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 574 #else
 575 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 576 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 577 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 578 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 579 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 580 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 581 #endif
 582 #endif
 583 #endif
 584
 585 /* Serial Port */
 586 #define CONFIG_CONS_INDEX       1
 587 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 588 #define CONFIG_SYS_NS16550_SERIAL
 589 #define CONFIG_SYS_NS16550_REG_SIZE     1
 590 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 591 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 592 #define CONFIG_NS16550_MIN_FUNCTIONS
 593 #endif
 594
 595 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 596
 597 #define CONFIG_SYS_BAUDRATE_TABLE       \
 598         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 599
 600 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 601 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 602
 603 /* I2C */
 604 #define CONFIG_SYS_I2C
 605 #define CONFIG_SYS_I2C_FSL
 606 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 607 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 608 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 609 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 610 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 611 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 612 #define I2C_PCA9557_ADDR1               0x18
 613 #define I2C_PCA9557_ADDR2               0x19
 614 #define I2C_PCA9557_BUS_NUM             0
 615
 616 /* I2C EEPROM */
 617 #if defined(CONFIG_P1010RDB_PB)
 618 #define CONFIG_ID_EEPROM
 619 #ifdef CONFIG_ID_EEPROM
 620 #define CONFIG_SYS_I2C_EEPROM_NXID
 621 #endif
 622 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 623 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 624 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 625 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 626 #endif
 627 /* enable read and write access to EEPROM */
 628 #define CONFIG_CMD_EEPROM
 629 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 630 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 631 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 632
 633 /* RTC */
 634 #define CONFIG_RTC_PT7C4338
 635 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 636
 637 /*
 638  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 639  * used for SLIC
 640  */
 641 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
 642 /* eSPI - Enhanced SPI */
 643 #define CONFIG_SF_DEFAULT_SPEED         10000000
 644 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 645 #endif
 646
 647 #if defined(CONFIG_TSEC_ENET)
 648 #define CONFIG_MII                      /* MII PHY management */
 649 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 650 #define CONFIG_TSEC1    1
 651 #define CONFIG_TSEC1_NAME       "eTSEC1"
 652 #define CONFIG_TSEC2    1
 653 #define CONFIG_TSEC2_NAME       "eTSEC2"
 654 #define CONFIG_TSEC3    1
 655 #define CONFIG_TSEC3_NAME       "eTSEC3"
 656
 657 #define TSEC1_PHY_ADDR          1
 658 #define TSEC2_PHY_ADDR          0
 659 #define TSEC3_PHY_ADDR          2
 660
 661 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 662 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 663 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 664
 665 #define TSEC1_PHYIDX            0
 666 #define TSEC2_PHYIDX            0
 667 #define TSEC3_PHYIDX            0
 668
 669 #define CONFIG_ETHPRIME         "eTSEC1"
 670
 671 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 672
 673 /* TBI PHY configuration for SGMII mode */
 674 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 675                 TBICR_PHY_RESET \
 676                 | TBICR_ANEG_ENABLE \
 677                 | TBICR_FULL_DUPLEX \
 678                 | TBICR_SPEED1_SET \
 679                 )
 680
 681 #endif  /* CONFIG_TSEC_ENET */
 682
 683 /* SATA */
 684 #define CONFIG_FSL_SATA
 685 #define CONFIG_FSL_SATA_V2
 686 #define CONFIG_LIBATA
 687
 688 #ifdef CONFIG_FSL_SATA
 689 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 690 #define CONFIG_SATA1
 691 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 692 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 693 #define CONFIG_SATA2
 694 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 695 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 696
 697 #define CONFIG_CMD_SATA
 698 #define CONFIG_LBA48
 699 #endif /* #ifdef CONFIG_FSL_SATA  */
 700
 701 #define CONFIG_MMC
 702 #ifdef CONFIG_MMC
 703 #define CONFIG_DOS_PARTITION
 704 #define CONFIG_FSL_ESDHC
 705 #define CONFIG_GENERIC_MMC
 706 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 707 #endif
 708
 709 #define CONFIG_HAS_FSL_DR_USB
 710
 711 #if defined(CONFIG_HAS_FSL_DR_USB)
 712 #define CONFIG_USB_EHCI
 713
 714 #ifdef CONFIG_USB_EHCI
 715 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 716 #define CONFIG_USB_EHCI_FSL
 717 #endif
 718 #endif
 719
 720 /*
 721  * Environment
 722  */
 723 #if defined(CONFIG_SDCARD)
 724 #define CONFIG_ENV_IS_IN_MMC
 725 #define CONFIG_FSL_FIXED_MMC_LOCATION
 726 #define CONFIG_SYS_MMC_ENV_DEV          0
 727 #define CONFIG_ENV_SIZE                 0x2000
 728 #elif defined(CONFIG_SPIFLASH)
 729 #define CONFIG_ENV_IS_IN_SPI_FLASH
 730 #define CONFIG_ENV_SPI_BUS      0
 731 #define CONFIG_ENV_SPI_CS       0
 732 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 733 #define CONFIG_ENV_SPI_MODE     0
 734 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 735 #define CONFIG_ENV_SECT_SIZE    0x10000
 736 #define CONFIG_ENV_SIZE         0x2000
 737 #elif defined(CONFIG_NAND)
 738 #define CONFIG_ENV_IS_IN_NAND
 739 #ifdef CONFIG_TPL_BUILD
 740 #define CONFIG_ENV_SIZE         0x2000
 741 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 742 #else
 743 #if defined(CONFIG_P1010RDB_PA)
 744 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 745 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
 746 #elif defined(CONFIG_P1010RDB_PB)
 747 #define CONFIG_ENV_SIZE         (16 * 1024)
 748 #define CONFIG_ENV_RANGE        (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 749 #endif
 750 #endif
 751 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 752 #elif defined(CONFIG_SYS_RAMBOOT)
 753 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 754 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 755 #define CONFIG_ENV_SIZE                 0x2000
 756 #else
 757 #define CONFIG_ENV_IS_IN_FLASH
 758 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 759 #define CONFIG_ENV_SIZE         0x2000
 760 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 761 #endif
 762
 763 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 764 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 765
 766 /*
 767  * Command line configuration.
 768  */
 769 #define CONFIG_CMD_DATE
 770 #define CONFIG_CMD_ERRATA
 771 #define CONFIG_CMD_IRQ
 772 #define CONFIG_CMD_REGINFO
 773
 774 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 775
 776 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 777                  || defined(CONFIG_FSL_SATA)
 778 #define CONFIG_DOS_PARTITION
 779 #endif
 780
 781 /* Hash command with SHA acceleration supported in hardware */
 782 #ifdef CONFIG_FSL_CAAM
 783 #define CONFIG_CMD_HASH
 784 #define CONFIG_SHA_HW_ACCEL
 785 #endif
 786
 787 /*
 788  * Miscellaneous configurable options
 789  */
 790 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 791 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 792 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 793 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 794
 795 #if defined(CONFIG_CMD_KGDB)
 796 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 797 #else
 798 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 799 #endif
 800 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 801                                                 /* Print Buffer Size */
 802 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 803 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 804
 805 /*
 806  * For booting Linux, the board info and command line data
 807  * have to be in the first 64 MB of memory, since this is
 808  * the maximum mapped by the Linux kernel during initialization.
 809  */
 810 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 811 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 812
 813 #if defined(CONFIG_CMD_KGDB)
 814 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 815 #endif
 816
 817 /*
 818  * Environment Configuration
 819  */
 820
 821 #if defined(CONFIG_TSEC_ENET)
 822 #define CONFIG_HAS_ETH0
 823 #define CONFIG_HAS_ETH1
 824 #define CONFIG_HAS_ETH2
 825 #endif
 826
 827 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 828 #define CONFIG_BOOTFILE         "uImage"
 829 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 830
 831 /* default location for tftp and bootm */
 832 #define CONFIG_LOADADDR         1000000
 833
 834 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 835
 836 #define CONFIG_BAUDRATE         115200
 837
 838 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 839         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 840         "netdev=eth0\0"                                         \
 841         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 842         "loadaddr=1000000\0"                    \
 843         "consoledev=ttyS0\0"                            \
 844         "ramdiskaddr=2000000\0"                 \
 845         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 846         "fdtaddr=1e00000\0"                             \
 847         "fdtfile=p1010rdb.dtb\0"                \
 848         "bdev=sda1\0"   \
 849         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 850         "othbootargs=ramdisk_size=600000\0" \
 851         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 852         "console=$consoledev,$baudrate $othbootargs; "  \
 853         "usb start;"                    \
 854         "fatload usb 0:2 $loadaddr $bootfile;"          \
 855         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 856         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 857         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 858         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 859         "console=$consoledev,$baudrate $othbootargs; "  \
 860         "usb start;"                    \
 861         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 862         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 863         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 864         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 865         CONFIG_BOOTMODE
 866
 867 #if defined(CONFIG_P1010RDB_PA)
 868 #define CONFIG_BOOTMODE \
 869         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 870         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 871         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 872         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 873         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 874         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 875
 876 #elif defined(CONFIG_P1010RDB_PB)
 877 #define CONFIG_BOOTMODE \
 878         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 879         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 880         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 881         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 882         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 883         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 884         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 885         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 886         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 887         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 888 #endif
 889
 890 #define CONFIG_RAMBOOTCOMMAND           \
 891         "setenv bootargs root=/dev/ram rw "     \
 892         "console=$consoledev,$baudrate $othbootargs; "  \
 893         "tftp $ramdiskaddr $ramdiskfile;"       \
 894         "tftp $loadaddr $bootfile;"             \
 895         "tftp $fdtaddr $fdtfile;"               \
 896         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 897
 898 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 899
 900 #include <asm/fsl_secure_boot.h>
 901
 902 #endif  /* __CONFIG_H */