include/configs/P1010RDB.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * P010 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #define CONFIG_P1010
  17 #define CONFIG_E500                     /* BOOKE e500 family */
  18 #include <asm/config_mpc85xx.h>
  19 #define CONFIG_NAND_FSL_IFC
  20
  21 #ifdef CONFIG_SDCARD
  22 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  23 #define CONFIG_SPL_SERIAL_SUPPORT
  24 #define CONFIG_SPL_MMC_SUPPORT
  25 #define CONFIG_SPL_MMC_MINIMAL
  26 #define CONFIG_SPL_FLUSH_IMAGE
  27 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  28 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  29 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  30 #define CONFIG_SPL_I2C_SUPPORT
  31 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
  32 #define CONFIG_SYS_TEXT_BASE            0x11001000
  33 #define CONFIG_SPL_TEXT_BASE            0xD0001000
  34 #define CONFIG_SPL_PAD_TO               0x18000
  35 #define CONFIG_SPL_MAX_SIZE             (96 * 1024)
  36 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (512 << 10)
  37 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  38 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  39 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (96 << 10)
  40 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  41 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  42 #define CONFIG_SPL_MMC_BOOT
  43 #ifdef CONFIG_SPL_BUILD
  44 #define CONFIG_SPL_COMMON_INIT_DDR
  45 #endif
  46 #endif
  47
  48 #ifdef CONFIG_SPIFLASH
  49 #ifdef CONFIG_SECURE_BOOT
  50 #define CONFIG_RAMBOOT_SPIFLASH
  51 #define CONFIG_SYS_TEXT_BASE            0x11000000
  52 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  53 #else
  54 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
  55 #define CONFIG_SPL_SERIAL_SUPPORT
  56 #define CONFIG_SPL_SPI_SUPPORT
  57 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  58 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  59 #define CONFIG_SPL_FLUSH_IMAGE
  60 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  61 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  62 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  63 #define CONFIG_SPL_I2C_SUPPORT
  64 #define CONFIG_FSL_LAW         /* Use common FSL init code */
  65 #define CONFIG_SYS_TEXT_BASE                    0x11001000
  66 #define CONFIG_SPL_TEXT_BASE                    0xD0001000
  67 #define CONFIG_SPL_PAD_TO                       0x18000
  68 #define CONFIG_SPL_MAX_SIZE                     (96 * 1024)
  69 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (512 << 10)
  70 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  71 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  72 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (96 << 10)
  73 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  74 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  75 #define CONFIG_SPL_SPI_BOOT
  76 #ifdef CONFIG_SPL_BUILD
  77 #define CONFIG_SPL_COMMON_INIT_DDR
  78 #endif
  79 #endif
  80 #endif
  81
  82 #ifdef CONFIG_NAND
  83 #ifdef CONFIG_SECURE_BOOT
  84 #define CONFIG_SPL_INIT_MINIMAL
  85 #define CONFIG_SPL_SERIAL_SUPPORT
  86 #define CONFIG_SPL_NAND_SUPPORT
  87 #define CONFIG_SPL_NAND_BOOT
  88 #define CONFIG_SPL_FLUSH_IMAGE
  89 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  90
  91 #define CONFIG_SYS_TEXT_BASE            0x00201000
  92 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  93 #define CONFIG_SPL_MAX_SIZE             8192
  94 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  95 #define CONFIG_SPL_RELOC_STACK          0x00100000
  96 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  97 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  98 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  99 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
 100 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 101 #else
 102 #ifdef CONFIG_TPL_BUILD
 103 #define CONFIG_SPL_NAND_BOOT
 104 #define CONFIG_SPL_FLUSH_IMAGE
 105 #define CONFIG_SPL_NAND_INIT
 106 #define CONFIG_TPL_SERIAL_SUPPORT
 107 #define CONFIG_TPL_LIBGENERIC_SUPPORT
 108 #define CONFIG_TPL_LIBCOMMON_SUPPORT
 109 #define CONFIG_TPL_I2C_SUPPORT
 110 #define CONFIG_TPL_NAND_SUPPORT
 111 #define CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT
 112 #define CONFIG_SPL_COMMON_INIT_DDR
 113 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 114 #define CONFIG_SPL_TEXT_BASE            0xD0001000
 115 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 116 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (576 << 10)
 117 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 118 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 119 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 120 #elif defined(CONFIG_SPL_BUILD)
 121 #define CONFIG_SPL_INIT_MINIMAL
 122 #define CONFIG_SPL_SERIAL_SUPPORT
 123 #define CONFIG_SPL_NAND_SUPPORT
 124 #define CONFIG_SPL_NAND_MINIMAL
 125 #define CONFIG_SPL_FLUSH_IMAGE
 126 #define CONFIG_SPL_TEXT_BASE            0xff800000
 127 #define CONFIG_SPL_MAX_SIZE             8192
 128 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 129 #define CONFIG_SYS_NAND_U_BOOT_DST      0xD0000000
 130 #define CONFIG_SYS_NAND_U_BOOT_START    0xD0000000
 131 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 132 #endif
 133 #define CONFIG_SPL_PAD_TO       0x20000
 134 #define CONFIG_TPL_PAD_TO       0x20000
 135 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
 136 #define CONFIG_SYS_TEXT_BASE    0x11001000
 137 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 138 #endif
 139 #endif
 140
 141 #ifdef CONFIG_NAND_SECBOOT      /* NAND Boot */
 142 #define CONFIG_RAMBOOT_NAND
 143 #define CONFIG_SYS_TEXT_BASE            0x11000000
 144 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
 145 #endif
 146
 147 #ifndef CONFIG_SYS_TEXT_BASE
 148 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 149 #endif
 150
 151 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 152 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 153 #endif
 154
 155 #ifdef CONFIG_SPL_BUILD
 156 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 157 #else
 158 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 159 #endif
 160
 161 /* High Level Configuration Options */
 162 #define CONFIG_BOOKE                    /* BOOKE */
 163 #define CONFIG_E500                     /* BOOKE e500 family */
 164 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
 165 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 166 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
 167
 168 #define CONFIG_PCI                      /* Enable PCI/PCIE */
 169 #if defined(CONFIG_PCI)
 170 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 171 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
 172 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 173 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 174 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 175 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 176
 177 #define CONFIG_CMD_PCI
 178
 179 /*
 180  * PCI Windows
 181  * Memory space is mapped 1-1, but I/O space must start from 0.
 182  */
 183 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 184 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe Slot"
 185 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 186 #ifdef CONFIG_PHYS_64BIT
 187 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 188 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 189 #else
 190 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 191 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 192 #endif
 193 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 194 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 195 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 196 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 197 #ifdef CONFIG_PHYS_64BIT
 198 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 199 #else
 200 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 201 #endif
 202
 203 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 204 #if defined(CONFIG_P1010RDB_PA)
 205 #define CONFIG_SYS_PCIE2_NAME           "PCIe Slot"
 206 #elif defined(CONFIG_P1010RDB_PB)
 207 #define CONFIG_SYS_PCIE2_NAME           "mini PCIe Slot"
 208 #endif
 209 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 210 #ifdef CONFIG_PHYS_64BIT
 211 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 212 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 213 #else
 214 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 215 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 216 #endif
 217 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 218 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 219 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 220 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 221 #ifdef CONFIG_PHYS_64BIT
 222 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 223 #else
 224 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 225 #endif
 226
 227 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 228
 229 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 230 #define CONFIG_DOS_PARTITION
 231 #endif
 232
 233 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 234 #define CONFIG_TSEC_ENET
 235 #define CONFIG_ENV_OVERWRITE
 236
 237 #define CONFIG_DDR_CLK_FREQ     66666666 /* DDRCLK on P1010 RDB */
 238 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for P1010 RDB */
 239
 240 #define CONFIG_MISC_INIT_R
 241 #define CONFIG_HWCONFIG
 242 /*
 243  * These can be toggled for performance analysis, otherwise use default.
 244  */
 245 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 246 #define CONFIG_BTB                      /* toggle branch predition */
 247
 248 #define CONFIG_ADDR_STREAMING           /* toggle addr streaming */
 249
 250 #define CONFIG_ENABLE_36BIT_PHYS
 251
 252 #ifdef CONFIG_PHYS_64BIT
 253 #define CONFIG_ADDR_MAP                 1
 254 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 255 #endif
 256
 257 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 258 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 259 #define CONFIG_PANIC_HANG               /* do not reset board on panic */
 260
 261 /* DDR Setup */
 262 #define CONFIG_SYS_FSL_DDR3
 263 #define CONFIG_SYS_DDR_RAW_TIMING
 264 #define CONFIG_DDR_SPD
 265 #define CONFIG_SYS_SPD_BUS_NUM          1
 266 #define SPD_EEPROM_ADDRESS              0x52
 267
 268 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 269
 270 #ifndef __ASSEMBLY__
 271 extern unsigned long get_sdram_size(void);
 272 #endif
 273 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
 274 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 275 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 276
 277 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 278 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 279
 280 /* DDR3 Controller Settings */
 281 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 282 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 283 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 284 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 285 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 286 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 287 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 288 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 289 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 290 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 291 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 292 #define CONFIG_SYS_DDR_CONTROL          0xc70c0008      /* Type = DDR3  */
 293 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 294 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 295 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 296
 297 #define CONFIG_SYS_DDR_TIMING_3_800     0x00030000
 298 #define CONFIG_SYS_DDR_TIMING_0_800     0x00110104
 299 #define CONFIG_SYS_DDR_TIMING_1_800     0x6f6b8644
 300 #define CONFIG_SYS_DDR_TIMING_2_800     0x0FA888CF
 301 #define CONFIG_SYS_DDR_CLK_CTRL_800     0x03000000
 302 #define CONFIG_SYS_DDR_MODE_1_800       0x00441420
 303 #define CONFIG_SYS_DDR_MODE_2_800       0x00000000
 304 #define CONFIG_SYS_DDR_INTERVAL_800     0x0C300100
 305 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
 306
 307 /* settings for DDR3 at 667MT/s */
 308 #define CONFIG_SYS_DDR_TIMING_3_667             0x00010000
 309 #define CONFIG_SYS_DDR_TIMING_0_667             0x00110004
 310 #define CONFIG_SYS_DDR_TIMING_1_667             0x5d59e544
 311 #define CONFIG_SYS_DDR_TIMING_2_667             0x0FA890CD
 312 #define CONFIG_SYS_DDR_CLK_CTRL_667             0x03000000
 313 #define CONFIG_SYS_DDR_MODE_1_667               0x00441210
 314 #define CONFIG_SYS_DDR_MODE_2_667               0x00000000
 315 #define CONFIG_SYS_DDR_INTERVAL_667             0x0a280000
 316 #define CONFIG_SYS_DDR_WRLVL_CONTROL_667        0x8675F608
 317
 318 #define CONFIG_SYS_CCSRBAR                      0xffe00000
 319 #define CONFIG_SYS_CCSRBAR_PHYS_LOW             CONFIG_SYS_CCSRBAR
 320
 321 /* Don't relocate CCSRBAR while in NAND_SPL */
 322 #ifdef CONFIG_SPL_BUILD
 323 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 324 #endif
 325
 326 /*
 327  * Memory map
 328  *
 329  * 0x0000_0000  0x3fff_ffff     DDR                     1G cacheable
 330  * 0x8000_0000  0xbfff_ffff     PCI Express Mem         1.5G non-cacheable
 331  * 0xffc0_0000  0xffc3_ffff     PCI IO range            256k non-cacheable
 332  *
 333  * Localbus non-cacheable
 334  * 0xff80_0000  0xff8f_ffff     NAND Flash              1M non-cacheable
 335  * 0xffb0_0000  0xffbf_ffff     Board CPLD              1M non-cacheable
 336  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 337  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 338  */
 339
 340 /*
 341  * IFC Definitions
 342  */
 343 /* NOR Flash on IFC */
 344 #ifdef CONFIG_SPL_BUILD
 345 #define CONFIG_SYS_NO_FLASH
 346 #endif
 347
 348 #define CONFIG_SYS_FLASH_BASE           0xee000000
 349 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 350
 351 #ifdef CONFIG_PHYS_64BIT
 352 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 353 #else
 354 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 355 #endif
 356
 357 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 358                                 CSPR_PORT_SIZE_16 | \
 359                                 CSPR_MSEL_NOR | \
 360                                 CSPR_V)
 361 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(32*1024*1024)
 362 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(7)
 363 /* NOR Flash Timing Params */
 364 #define CONFIG_SYS_NOR_FTIM0    FTIM0_NOR_TACSE(0x4) | \
 365                                 FTIM0_NOR_TEADC(0x5) | \
 366                                 FTIM0_NOR_TEAHC(0x5)
 367 #define CONFIG_SYS_NOR_FTIM1    FTIM1_NOR_TACO(0x1e) | \
 368                                 FTIM1_NOR_TRAD_NOR(0x0f)
 369 #define CONFIG_SYS_NOR_FTIM2    FTIM2_NOR_TCS(0x4) | \
 370                                 FTIM2_NOR_TCH(0x4) | \
 371                                 FTIM2_NOR_TWP(0x1c)
 372 #define CONFIG_SYS_NOR_FTIM3    0x0
 373
 374 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 375 #define CONFIG_SYS_FLASH_QUIET_TEST
 376 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 377 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 378
 379 #undef CONFIG_SYS_FLASH_CHECKSUM
 380 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 381 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 382
 383 /* CFI for NOR Flash */
 384 #define CONFIG_FLASH_CFI_DRIVER
 385 #define CONFIG_SYS_FLASH_CFI
 386 #define CONFIG_SYS_FLASH_EMPTY_INFO
 387 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 388
 389 /* NAND Flash on IFC */
 390 #define CONFIG_SYS_NAND_BASE            0xff800000
 391 #ifdef CONFIG_PHYS_64BIT
 392 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 393 #else
 394 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 395 #endif
 396
 397 #define CONFIG_MTD_DEVICE
 398 #define CONFIG_MTD_PARTITION
 399 #define CONFIG_CMD_MTDPARTS
 400 #define MTDIDS_DEFAULT                  "nand0=ff800000.flash"
 401 #define MTDPARTS_DEFAULT                \
 402         "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)"
 403
 404 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 405                                 | CSPR_PORT_SIZE_8      \
 406                                 | CSPR_MSEL_NAND        \
 407                                 | CSPR_V)
 408 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 409
 410 #if defined(CONFIG_P1010RDB_PA)
 411 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 412                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 413                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 414                                 | CSOR_NAND_RAL_2       /* RAL = 2 Bytes */ \
 415                                 | CSOR_NAND_PGS_512     /* Page Size = 512b */ \
 416                                 | CSOR_NAND_SPRZ_16     /* Spare size = 16 */ \
 417                                 | CSOR_NAND_PB(32))     /* 32 Pages Per Block */
 418 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 419
 420 #elif defined(CONFIG_P1010RDB_PB)
 421 #define CONFIG_SYS_NAND_ONFI_DETECTION
 422 #define CONFIG_SYS_NAND_CSOR   (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 423                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 424                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 425                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 426                                 | CSOR_NAND_PGS_4K      /* Page Size = 4K */ \
 427                                 | CSOR_NAND_SPRZ_224    /* Spare size = 224 */ \
 428                                 | CSOR_NAND_PB(128))  /*Pages Per Block = 128 */
 429 #define CONFIG_SYS_NAND_BLOCK_SIZE     (512 * 1024)
 430 #endif
 431
 432 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 433 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 434 #define CONFIG_CMD_NAND
 435
 436 #if defined(CONFIG_P1010RDB_PA)
 437 /* NAND Flash Timing Params */
 438 #define CONFIG_SYS_NAND_FTIM0           FTIM0_NAND_TCCST(0x01) | \
 439                                         FTIM0_NAND_TWP(0x0C)   | \
 440                                         FTIM0_NAND_TWCHT(0x04) | \
 441                                         FTIM0_NAND_TWH(0x05)
 442 #define CONFIG_SYS_NAND_FTIM1           FTIM1_NAND_TADLE(0x1d) | \
 443                                         FTIM1_NAND_TWBE(0x1d)  | \
 444                                         FTIM1_NAND_TRR(0x07)   | \
 445                                         FTIM1_NAND_TRP(0x0c)
 446 #define CONFIG_SYS_NAND_FTIM2           FTIM2_NAND_TRAD(0x0c) | \
 447                                         FTIM2_NAND_TREH(0x05) | \
 448                                         FTIM2_NAND_TWHRE(0x0f)
 449 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 450
 451 #elif defined(CONFIG_P1010RDB_PB)
 452 /* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
 453 /* ONFI NAND Flash mode0 Timing Params */
 454 #define CONFIG_SYS_NAND_FTIM0  (FTIM0_NAND_TCCST(0x07)| \
 455                                         FTIM0_NAND_TWP(0x18)   | \
 456                                         FTIM0_NAND_TWCHT(0x07) | \
 457                                         FTIM0_NAND_TWH(0x0a))
 458 #define CONFIG_SYS_NAND_FTIM1  (FTIM1_NAND_TADLE(0x32)| \
 459                                         FTIM1_NAND_TWBE(0x39)  | \
 460                                         FTIM1_NAND_TRR(0x0e)   | \
 461                                         FTIM1_NAND_TRP(0x18))
 462 #define CONFIG_SYS_NAND_FTIM2  (FTIM2_NAND_TRAD(0x0f) | \
 463                                         FTIM2_NAND_TREH(0x0a)  | \
 464                                         FTIM2_NAND_TWHRE(0x1e))
 465 #define CONFIG_SYS_NAND_FTIM3   0x0
 466 #endif
 467
 468 #define CONFIG_SYS_NAND_DDR_LAW         11
 469
 470 /* Set up IFC registers for boot location NOR/NAND */
 471 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 472 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 473 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 474 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 475 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 476 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 477 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 478 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 479 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 480 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 481 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 482 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 483 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 484 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 485 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 486 #else
 487 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 488 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 489 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 490 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 491 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 492 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 493 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 494 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 495 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 496 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 497 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 498 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 499 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 500 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 501 #endif
 502
 503 /* CPLD on IFC */
 504 #define CONFIG_SYS_CPLD_BASE            0xffb00000
 505
 506 #ifdef CONFIG_PHYS_64BIT
 507 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffb00000ull
 508 #else
 509 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 510 #endif
 511
 512 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 513                                 | CSPR_PORT_SIZE_8 \
 514                                 | CSPR_MSEL_GPCM \
 515                                 | CSPR_V)
 516 #define CONFIG_SYS_AMASK3               IFC_AMASK(64*1024)
 517 #define CONFIG_SYS_CSOR3                0x0
 518 /* CPLD Timing parameters for IFC CS3 */
 519 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 520                                         FTIM0_GPCM_TEADC(0x0e) | \
 521                                         FTIM0_GPCM_TEAHC(0x0e))
 522 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 523                                         FTIM1_GPCM_TRAD(0x1f))
 524 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 525                                         FTIM2_GPCM_TCH(0x8) | \
 526                                         FTIM2_GPCM_TWP(0x1f))
 527 #define CONFIG_SYS_CS3_FTIM3            0x0
 528
 529 #if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
 530         defined(CONFIG_RAMBOOT_NAND)
 531 #define CONFIG_SYS_RAMBOOT
 532 #define CONFIG_SYS_EXTRA_ENV_RELOC
 533 #else
 534 #undef CONFIG_SYS_RAMBOOT
 535 #endif
 536
 537 #ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 538 #if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
 539 #define CONFIG_A003399_NOR_WORKAROUND
 540 #endif
 541 #endif
 542
 543 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 544 #define CONFIG_BOARD_EARLY_INIT_R
 545
 546 #define CONFIG_SYS_INIT_RAM_LOCK
 547 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 548 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 549
 550 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 551                                                 - GENERATED_GBL_DATA_SIZE)
 552 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 553
 554 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 555 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 556
 557 /*
 558  * Config the L2 Cache as L2 SRAM
 559  */
 560 #if defined(CONFIG_SPL_BUILD)
 561 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 562 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 563 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 564 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 565 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 566 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 567 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 568 #define CONFIG_SPL_RELOC_STACK_SIZE     (16 << 10)
 569 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 570 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (128 << 10)
 571 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
 572 #elif defined(CONFIG_NAND)
 573 #ifdef CONFIG_TPL_BUILD
 574 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 575 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 576 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 577 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 578 #define CONFIG_SPL_RELOC_TEXT_BASE      0xD0001000
 579 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 580 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 581 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 582 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 583 #else
 584 #define CONFIG_SYS_INIT_L2_ADDR         0xD0000000
 585 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 586 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 587 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 588 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 589 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 590 #endif
 591 #endif
 592 #endif
 593
 594 /* Serial Port */
 595 #define CONFIG_CONS_INDEX       1
 596 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 597 #define CONFIG_SYS_NS16550_SERIAL
 598 #define CONFIG_SYS_NS16550_REG_SIZE     1
 599 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 600 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 601 #define CONFIG_NS16550_MIN_FUNCTIONS
 602 #endif
 603
 604 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 605
 606 #define CONFIG_SYS_BAUDRATE_TABLE       \
 607         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 608
 609 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 610 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 611
 612 /* I2C */
 613 #define CONFIG_SYS_I2C
 614 #define CONFIG_SYS_I2C_FSL
 615 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 616 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 617 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 618 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 619 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 620 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 621 #define I2C_PCA9557_ADDR1               0x18
 622 #define I2C_PCA9557_ADDR2               0x19
 623 #define I2C_PCA9557_BUS_NUM             0
 624
 625 /* I2C EEPROM */
 626 #if defined(CONFIG_P1010RDB_PB)
 627 #define CONFIG_ID_EEPROM
 628 #ifdef CONFIG_ID_EEPROM
 629 #define CONFIG_SYS_I2C_EEPROM_NXID
 630 #endif
 631 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 632 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 633 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 634 #define MAX_NUM_PORTS                   9 /* for 128Bytes EEPROM */
 635 #endif
 636 /* enable read and write access to EEPROM */
 637 #define CONFIG_CMD_EEPROM
 638 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 639 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 640 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 641
 642 /* RTC */
 643 #define CONFIG_RTC_PT7C4338
 644 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 645
 646 /*
 647  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 648  * used for SLIC
 649  */
 650 #if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
 651 /* eSPI - Enhanced SPI */
 652 #define CONFIG_SF_DEFAULT_SPEED         10000000
 653 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 654 #endif
 655
 656 #if defined(CONFIG_TSEC_ENET)
 657 #define CONFIG_MII                      /* MII PHY management */
 658 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 659 #define CONFIG_TSEC1    1
 660 #define CONFIG_TSEC1_NAME       "eTSEC1"
 661 #define CONFIG_TSEC2    1
 662 #define CONFIG_TSEC2_NAME       "eTSEC2"
 663 #define CONFIG_TSEC3    1
 664 #define CONFIG_TSEC3_NAME       "eTSEC3"
 665
 666 #define TSEC1_PHY_ADDR          1
 667 #define TSEC2_PHY_ADDR          0
 668 #define TSEC3_PHY_ADDR          2
 669
 670 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 671 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 672 #define TSEC3_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 673
 674 #define TSEC1_PHYIDX            0
 675 #define TSEC2_PHYIDX            0
 676 #define TSEC3_PHYIDX            0
 677
 678 #define CONFIG_ETHPRIME         "eTSEC1"
 679
 680 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 681
 682 /* TBI PHY configuration for SGMII mode */
 683 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 684                 TBICR_PHY_RESET \
 685                 | TBICR_ANEG_ENABLE \
 686                 | TBICR_FULL_DUPLEX \
 687                 | TBICR_SPEED1_SET \
 688                 )
 689
 690 #endif  /* CONFIG_TSEC_ENET */
 691
 692 /* SATA */
 693 #define CONFIG_FSL_SATA
 694 #define CONFIG_FSL_SATA_V2
 695 #define CONFIG_LIBATA
 696
 697 #ifdef CONFIG_FSL_SATA
 698 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 699 #define CONFIG_SATA1
 700 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 701 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 702 #define CONFIG_SATA2
 703 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 704 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 705
 706 #define CONFIG_CMD_SATA
 707 #define CONFIG_LBA48
 708 #endif /* #ifdef CONFIG_FSL_SATA  */
 709
 710 #define CONFIG_MMC
 711 #ifdef CONFIG_MMC
 712 #define CONFIG_DOS_PARTITION
 713 #define CONFIG_FSL_ESDHC
 714 #define CONFIG_GENERIC_MMC
 715 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 716 #endif
 717
 718 #define CONFIG_HAS_FSL_DR_USB
 719
 720 #if defined(CONFIG_HAS_FSL_DR_USB)
 721 #define CONFIG_USB_EHCI
 722
 723 #ifdef CONFIG_USB_EHCI
 724 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 725 #define CONFIG_USB_EHCI_FSL
 726 #endif
 727 #endif
 728
 729 /*
 730  * Environment
 731  */
 732 #if defined(CONFIG_SDCARD)
 733 #define CONFIG_ENV_IS_IN_MMC
 734 #define CONFIG_FSL_FIXED_MMC_LOCATION
 735 #define CONFIG_SYS_MMC_ENV_DEV          0
 736 #define CONFIG_ENV_SIZE                 0x2000
 737 #elif defined(CONFIG_SPIFLASH)
 738 #define CONFIG_ENV_IS_IN_SPI_FLASH
 739 #define CONFIG_ENV_SPI_BUS      0
 740 #define CONFIG_ENV_SPI_CS       0
 741 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 742 #define CONFIG_ENV_SPI_MODE     0
 743 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 744 #define CONFIG_ENV_SECT_SIZE    0x10000
 745 #define CONFIG_ENV_SIZE         0x2000
 746 #elif defined(CONFIG_NAND)
 747 #define CONFIG_ENV_IS_IN_NAND
 748 #ifdef CONFIG_TPL_BUILD
 749 #define CONFIG_ENV_SIZE         0x2000
 750 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 751 #else
 752 #if defined(CONFIG_P1010RDB_PA)
 753 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 754 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
 755 #elif defined(CONFIG_P1010RDB_PB)
 756 #define CONFIG_ENV_SIZE         (16 * 1024)
 757 #define CONFIG_ENV_RANGE        (32 * CONFIG_ENV_SIZE) /* new block size 512K */
 758 #endif
 759 #endif
 760 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 761 #elif defined(CONFIG_SYS_RAMBOOT)
 762 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 763 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 764 #define CONFIG_ENV_SIZE                 0x2000
 765 #else
 766 #define CONFIG_ENV_IS_IN_FLASH
 767 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 768 #define CONFIG_ENV_SIZE         0x2000
 769 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 770 #endif
 771
 772 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 773 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 774
 775 /*
 776  * Command line configuration.
 777  */
 778 #define CONFIG_CMD_DATE
 779 #define CONFIG_CMD_ERRATA
 780 #define CONFIG_CMD_IRQ
 781 #define CONFIG_CMD_REGINFO
 782
 783 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 784
 785 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 786                  || defined(CONFIG_FSL_SATA)
 787 #define CONFIG_DOS_PARTITION
 788 #endif
 789
 790 /* Hash command with SHA acceleration supported in hardware */
 791 #ifdef CONFIG_FSL_CAAM
 792 #define CONFIG_CMD_HASH
 793 #define CONFIG_SHA_HW_ACCEL
 794 #endif
 795
 796 /*
 797  * Miscellaneous configurable options
 798  */
 799 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 800 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 801 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 802 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 803
 804 #if defined(CONFIG_CMD_KGDB)
 805 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 806 #else
 807 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 808 #endif
 809 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 810                                                 /* Print Buffer Size */
 811 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 812 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 813
 814 /*
 815  * For booting Linux, the board info and command line data
 816  * have to be in the first 64 MB of memory, since this is
 817  * the maximum mapped by the Linux kernel during initialization.
 818  */
 819 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 820 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 821
 822 #if defined(CONFIG_CMD_KGDB)
 823 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 824 #endif
 825
 826 /*
 827  * Environment Configuration
 828  */
 829
 830 #if defined(CONFIG_TSEC_ENET)
 831 #define CONFIG_HAS_ETH0
 832 #define CONFIG_HAS_ETH1
 833 #define CONFIG_HAS_ETH2
 834 #endif
 835
 836 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 837 #define CONFIG_BOOTFILE         "uImage"
 838 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 839
 840 /* default location for tftp and bootm */
 841 #define CONFIG_LOADADDR         1000000
 842
 843 #undef  CONFIG_BOOTARGS         /* the boot command will set bootargs */
 844
 845 #define CONFIG_BAUDRATE         115200
 846
 847 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 848         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 849         "netdev=eth0\0"                                         \
 850         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 851         "loadaddr=1000000\0"                    \
 852         "consoledev=ttyS0\0"                            \
 853         "ramdiskaddr=2000000\0"                 \
 854         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 855         "fdtaddr=1e00000\0"                             \
 856         "fdtfile=p1010rdb.dtb\0"                \
 857         "bdev=sda1\0"   \
 858         "hwconfig=usb1:dr_mode=host,phy_type=utmi\0"    \
 859         "othbootargs=ramdisk_size=600000\0" \
 860         "usbfatboot=setenv bootargs root=/dev/ram rw "  \
 861         "console=$consoledev,$baudrate $othbootargs; "  \
 862         "usb start;"                    \
 863         "fatload usb 0:2 $loadaddr $bootfile;"          \
 864         "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 865         "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 866         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"               \
 867         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 868         "console=$consoledev,$baudrate $othbootargs; "  \
 869         "usb start;"                    \
 870         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 871         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 872         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 873         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 874         CONFIG_BOOTMODE
 875
 876 #if defined(CONFIG_P1010RDB_PA)
 877 #define CONFIG_BOOTMODE \
 878         "boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 879         "mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
 880         "boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
 881         "mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
 882         "boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
 883         "mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
 884
 885 #elif defined(CONFIG_P1010RDB_PB)
 886 #define CONFIG_BOOTMODE \
 887         "boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 888         "i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
 889         "boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
 890         "i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
 891         "boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
 892         "i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
 893         "boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
 894         "i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
 895         "boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
 896         "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
 897 #endif
 898
 899 #define CONFIG_RAMBOOTCOMMAND           \
 900         "setenv bootargs root=/dev/ram rw "     \
 901         "console=$consoledev,$baudrate $othbootargs; "  \
 902         "tftp $ramdiskaddr $ramdiskfile;"       \
 903         "tftp $loadaddr $bootfile;"             \
 904         "tftp $fdtaddr $fdtfile;"               \
 905         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 906
 907 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 908
 909 #include <asm/fsl_secure_boot.h>
 910
 911 #endif  /* __CONFIG_H */