include/configs/MVBLM7.h

   1 /*
   2  * Copyright (C) Matrix Vision GmbH 2008
   3  *
   4  * Matrix Vision mvBlueLYNX-M7 configuration file
   5  * based on Freescale's MPC8349ITX.
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 #include <version.h>
  31
  32 /*
  33  * High Level Configuration Options
  34  */
  35 #define CONFIG_E300     1
  36 #define CONFIG_MPC83xx  1
  37 #define CONFIG_MPC834x  1
  38 #define CONFIG_MPC8343  1
  39
  40 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  41
  42 #define CONFIG_SYS_IMMR         0xE0000000
  43
  44 #define CONFIG_PCI
  45 #define CONFIG_PCI_SKIP_HOST_BRIDGE
  46 #define CONFIG_HARD_I2C
  47 #define CONFIG_TSEC_ENET
  48 #define CONFIG_MPC8XXX_SPI
  49 #define CONFIG_HARD_SPI
  50 #define MVBLM7_MMC_CS   0x04000000
  51 #define CONFIG_MISC_INIT_R
  52
  53 /* I2C */
  54 #define CONFIG_FSL_I2C
  55 #define CONFIG_I2C_MULTI_BUS
  56 #define CONFIG_SYS_I2C_OFFSET           0x3000
  57 #define CONFIG_SYS_I2C2_OFFSET          0x3100
  58
  59 #define CONFIG_SYS_I2C_SPEED            100000
  60 #define CONFIG_SYS_I2C_SLAVE            0x7F
  61
  62 /*
  63  * DDR Setup
  64  */
  65 #undef  CONFIG_SPD_EEPROM
  66
  67 #define CONFIG_SYS_DDR_BASE             0x00000000
  68 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  69 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  70 #define CONFIG_SYS_83XX_DDR_USES_CS0    1
  71 #define CONFIG_SYS_MEMTEST_START        (60<<20)
  72 #define CONFIG_SYS_MEMTEST_END          (70<<20)
  73 #define CONFIG_VERY_BIG_RAM
  74
  75 #define CONFIG_SYS_DDRCDR               0x22000001
  76 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
  77
  78 #define CONFIG_SYS_DDR_SIZE             512
  79
  80 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
  81
  82 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
  83
  84 #define CONFIG_SYS_DDR_TIMING_0         0x00260802
  85 #define CONFIG_SYS_DDR_TIMING_1         0x3837c322
  86 #define CONFIG_SYS_DDR_TIMING_2         0x0f9848c6
  87 #define CONFIG_SYS_DDR_TIMING_3         0x00000000
  88
  89 #define CONFIG_SYS_DDR_SDRAM_CFG        0x43080008
  90 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
  91 #define CONFIG_SYS_DDR_INTERVAL         0x02000100
  92
  93 #define CONFIG_SYS_DDR_MODE             0x04040242
  94 #define CONFIG_SYS_DDR_MODE2            0x00800000
  95
  96 /* Flash */
  97 #define CONFIG_SYS_FLASH_CFI
  98 #define CONFIG_FLASH_CFI_DRIVER
  99 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 100
 101 #define CONFIG_SYS_FLASH_BASE           0xFF800000
 102 #define CONFIG_SYS_FLASH_SIZE           8
 103 #define CONFIG_SYS_FLASH_SIZE_SHIFT     3
 104 #define CONFIG_SYS_FLASH_EMPTY_INFO
 105 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000
 106 #define CONFIG_SYS_FLASH_WRITE_TOUT     500
 107 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 108 #define CONFIG_SYS_MAX_FLASH_SECT       256
 109
 110 #define CONFIG_SYS_BR0_PRELIM           (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V)
 111 #define CONFIG_SYS_OR0_PRELIM           ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM |  \
 112                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS|\
 113                                 OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 114                                 OR_GPCM_EAD)
 115 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 116 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | (0x13 + CONFIG_SYS_FLASH_SIZE_SHIFT))
 117
 118 /*
 119  * U-Boot memory configuration
 120  */
 121 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 122 #undef  CONFIG_SYS_RAMBOOT
 123
 124 #define CONFIG_SYS_INIT_RAM_LOCK
 125 #define CONFIG_SYS_INIT_RAM_ADDR        0xFD000000      /* Initial RAM address */
 126 #define CONFIG_SYS_INIT_RAM_END 0x1000          /* End of used area in RAM*/
 127
 128 #define CONFIG_SYS_GBL_DATA_SIZE        0x100           /* num bytes initial data */
 129 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 130 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 131
 132 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 133 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 134 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024)
 135
 136 /*
 137  * Local Bus LCRR and LBCR regs
 138  *  LCRR:  DLL bypass, Clock divider is 4
 139  * External Local Bus rate is
 140  *  CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
 141  */
 142 #define CONFIG_SYS_LCRR_DBYP    LCRR_DBYP
 143 #define CONFIG_SYS_LCRR_CLKDIV  LCRR_CLKDIV_4
 144 #define CONFIG_SYS_LBC_LBCR     0x00000000
 145
 146 /* LB sdram refresh timer, about 6us */
 147 #define CONFIG_SYS_LBC_LSRT     0x32000000
 148 /* LB refresh timer prescal, 266MHz/32*/
 149 #define CONFIG_SYS_LBC_MRTPR    0x20000000
 150
 151 /*
 152  * Serial Port
 153  */
 154 #define CONFIG_CONS_INDEX       1
 155 #define CONFIG_SYS_NS16550
 156 #define CONFIG_SYS_NS16550_SERIAL
 157 #define CONFIG_SYS_NS16550_REG_SIZE     1
 158 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 159
 160 #define CONFIG_SYS_BAUDRATE_TABLE  \
 161         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 162
 163 #define CONFIG_CONSOLE          ttyS0
 164 #define CONFIG_BAUDRATE         115200
 165
 166 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
 167 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
 168
 169 /* pass open firmware flat tree */
 170 #define CONFIG_OF_LIBFDT                1
 171 #define CONFIG_OF_BOARD_SETUP           1
 172 #define CONFIG_OF_STDOUT_VIA_ALIAS      1
 173 #define MV_DTB_NAME     "mvblm7.dtb"
 174
 175 /*
 176  * PCI
 177  */
 178 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 179 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 180 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000
 181 #define CONFIG_SYS_PCI1_MMIO_BASE       (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
 182 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 183 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000
 184 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
 185 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
 186 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000
 187
 188 #define CONFIG_NET_MULTI        1
 189 #define CONFIG_NET_RETRY_COUNT  3
 190
 191 #define CONFIG_PCI_66M
 192 #define CONFIG_83XX_CLKIN       66666667
 193 #define CONFIG_PCI_PNP
 194 #define CONFIG_PCI_SCAN_SHOW
 195
 196 /* TSEC */
 197 #define CONFIG_GMII
 198 #define CONFIG_SYS_VSC8601_SKEWFIX
 199 #define CONFIG_SYS_VSC8601_SKEW_TX      3
 200 #define CONFIG_SYS_VSC8601_SKEW_RX      3
 201
 202 #define CONFIG_TSEC1
 203 #define CONFIG_TSEC2
 204
 205 #define CONFIG_HAS_ETH0
 206 #define CONFIG_TSEC1_NAME       "TSEC0"
 207 #define CONFIG_FEC1_PHY_NORXERR
 208 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
 209 #define CONFIG_SYS_TSEC1                (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 210 #define TSEC1_PHY_ADDR          0x10
 211 #define TSEC1_PHYIDX            0
 212 #define TSEC1_FLAGS             (TSEC_GIGABIT|TSEC_REDUCED)
 213
 214 #define CONFIG_HAS_ETH1
 215 #define CONFIG_TSEC2_NAME       "TSEC1"
 216 #define CONFIG_FEC2_PHY_NORXERR
 217 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
 218 #define CONFIG_SYS_TSEC2                (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
 219 #define TSEC2_PHY_ADDR          0x11
 220 #define TSEC2_PHYIDX            0
 221 #define TSEC2_FLAGS             (TSEC_GIGABIT|TSEC_REDUCED)
 222
 223 #define CONFIG_ETHPRIME         "TSEC0"
 224
 225 #define CONFIG_BOOTP_VENDOREX
 226 #define CONFIG_BOOTP_SUBNETMASK
 227 #define CONFIG_BOOTP_GATEWAY
 228 #define CONFIG_BOOTP_DNS
 229 #define CONFIG_BOOTP_DNS2
 230 #define CONFIG_BOOTP_HOSTNAME
 231 #define CONFIG_BOOTP_BOOTFILESIZE
 232 #define CONFIG_BOOTP_BOOTPATH
 233 #define CONFIG_BOOTP_NTPSERVER
 234 #define CONFIG_BOOTP_RANDOM_DELAY
 235 #define CONFIG_BOOTP_SEND_HOSTNAME
 236
 237 /* USB */
 238 #define CONFIG_SYS_USB_HOST
 239 #define CONFIG_USB_EHCI
 240 #define CONFIG_USB_EHCI_FSL
 241 #define CONFIG_HAS_FSL_DR_USB
 242 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 243
 244 /*
 245  * Environment
 246  */
 247 #undef  CONFIG_SYS_FLASH_PROTECTION
 248 #define CONFIG_ENV_OVERWRITE
 249
 250 #define CONFIG_ENV_IS_IN_FLASH  1
 251 #define CONFIG_ENV_ADDR         0xFF800000
 252 #define CONFIG_ENV_SIZE         0x2000
 253 #define CONFIG_ENV_SECT_SIZE    0x2000
 254 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
 255 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 256
 257 #define CONFIG_LOADS_ECHO
 258 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 259
 260 /*
 261  * Command line configuration.
 262  */
 263 #include <config_cmd_default.h>
 264
 265 #define CONFIG_CMD_CACHE
 266 #define CONFIG_CMD_IRQ
 267 #define CONFIG_CMD_NET
 268 #define CONFIG_CMD_MII
 269 #define CONFIG_CMD_PING
 270 #define CONFIG_CMD_DHCP
 271 #define CONFIG_CMD_SDRAM
 272 #define CONFIG_CMD_PCI
 273 #define CONFIG_CMD_I2C
 274 #define CONFIG_CMD_FPGA
 275 #define CONFIG_CMD_USB
 276 #define CONFIG_DOS_PARTITION
 277
 278 #undef CONFIG_WATCHDOG
 279
 280 /*
 281  * Miscellaneous configurable options
 282  */
 283 #define CONFIG_SYS_LONGHELP
 284 #define CONFIG_CMDLINE_EDITING
 285 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 286 #define CONFIG_SYS_HUSH_PARSER
 287 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 288
 289 /* default load address */
 290 #define CONFIG_SYS_LOAD_ADDR    0x2000000
 291 /* default location for tftp and bootm */
 292 #define CONFIG_LOADADDR 0x200000
 293
 294 #define CONFIG_SYS_PROMPT       "mvBL-M7> "
 295 #define CONFIG_SYS_CBSIZE       256
 296
 297 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 298 #define CONFIG_SYS_MAXARGS      16
 299 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 300 #define CONFIG_SYS_HZ           1000
 301
 302 /*
 303  * For booting Linux, the board info and command line data
 304  * have to be in the first 256 MB of memory, since this is
 305  * the maximum mapped by the Linux kernel during initialization.
 306  */
 307 #define CONFIG_SYS_BOOTMAPSZ    (256 << 20)     /* Initial Memory map for Linux*/
 308
 309 #define CONFIG_SYS_HRCW_LOW     0x0
 310 #define CONFIG_SYS_HRCW_HIGH    0x0
 311
 312 /*
 313  * System performance
 314  */
 315 #define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth (0-3) */
 316 #define CONFIG_SYS_ACR_RPTCNT           3       /* Arbiter repeat count (0-7) */
 317 #define CONFIG_SYS_SPCR_TSEC1EP 3       /* TSEC1 emergency priority (0-3) */
 318 #define CONFIG_SYS_SPCR_TSEC2EP 3       /* TSEC2 emergency priority (0-3) */
 319
 320 /* clocking */
 321 #define CONFIG_SYS_SCCR_ENCCM           0
 322 #define CONFIG_SYS_SCCR_USBMPHCM        0
 323 #define CONFIG_SYS_SCCR_USBDRCM 2
 324 #define CONFIG_SYS_SCCR_TSEC1CM 1
 325 #define CONFIG_SYS_SCCR_TSEC2CM 1
 326
 327 #define CONFIG_SYS_SICRH        0x1fef0003
 328 #define CONFIG_SYS_SICRL        (SICRL_LDP_A | SICRL_USB1 | SICRL_USB0)
 329
 330 #define CONFIG_SYS_HID0_INIT    0x000000000
 331 #define CONFIG_SYS_HID0_FINAL   (CONFIG_SYS_HID0_INIT | \
 332                                  HID0_ENABLE_INSTRUCTION_CACHE)
 333
 334 #define CONFIG_SYS_HID2 HID2_HBE
 335 #define CONFIG_HIGH_BATS        1
 336
 337 /* DDR  */
 338 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 339 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 340
 341 /* PCI  */
 342 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 343 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 344 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT |\
 345                                 BATL_GUARDEDSTORAGE)
 346 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 347
 348 /* no PCI2 */
 349 #define CONFIG_SYS_IBAT3L       0
 350 #define CONFIG_SYS_IBAT3U       0
 351 #define CONFIG_SYS_IBAT4L       0
 352 #define CONFIG_SYS_IBAT4U       0
 353
 354 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
 355 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | \
 356                                 BATL_GUARDEDSTORAGE)
 357 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 358
 359 /* stack in DCACHE 0xFDF00000 & FLASH @ 0xFF800000 */
 360 #define CONFIG_SYS_IBAT6L       (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE | \
 361                                  BATL_GUARDEDSTORAGE)
 362 #define CONFIG_SYS_IBAT6U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 363 #define CONFIG_SYS_IBAT7L       0
 364 #define CONFIG_SYS_IBAT7U       0
 365
 366 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 367 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 368 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 369 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 370 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 371 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 372 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 373 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 374 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 375 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 376 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 377 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 378 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 379 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 380 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 381 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 382
 383 /*
 384  * Environment Configuration
 385  */
 386 #define CONFIG_ENV_OVERWRITE
 387
 388 #define CONFIG_NETDEV           eth0
 389
 390 /* Default path and filenames */
 391 #define CONFIG_BOOTDELAY                5
 392 #define CONFIG_AUTOBOOT_KEYED
 393 #define CONFIG_AUTOBOOT_STOP_STR        "s"
 394 #define CONFIG_ZERO_BOOTDELAY_CHECK
 395 #define CONFIG_RESET_TO_RETRY           1000
 396
 397 #define MV_CI                   mvBL-M7
 398 #define MV_VCI                  mvBL-M7
 399 #define MV_FPGA_DATA            0xfff40000
 400 #define MV_FPGA_SIZE            0
 401 #define MV_KERNEL_ADDR          0xff810000
 402 #define MV_INITRD_ADDR          0xffb00000
 403 #define MV_SCRIPT_ADDR          0xff804000
 404 #define MV_SCRIPT_ADDR2         0xff806000
 405 #define MV_DTB_ADDR             0xff808000
 406 #define MV_INITRD_LENGTH        0x00400000
 407
 408 #define CONFIG_SHOW_BOOT_PROGRESS 1
 409
 410 #define MV_KERNEL_ADDR_RAM      0x00100000
 411 #define MV_DTB_ADDR_RAM         0x00600000
 412 #define MV_INITRD_ADDR_RAM      0x01000000
 413
 414 #define CONFIG_BOOTCOMMAND      "if imi ${script_addr}; \
 415                                         then source ${script_addr};  \
 416                                         else source ${script_addr2}; \
 417                                 fi;"
 418 #define CONFIG_BOOTARGS         "root=/dev/ram ro rootfstype=squashfs"
 419
 420 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 421         "console_nr=0\0"                                        \
 422         "baudrate=" MK_STR(CONFIG_BAUDRATE) "\0"                \
 423         "stdin=serial\0"                                        \
 424         "stdout=serial\0"                                       \
 425         "stderr=serial\0"                                       \
 426         "fpga=0\0"                                              \
 427         "fpgadata=" MK_STR(MV_FPGA_DATA) "\0"                   \
 428         "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0"               \
 429         "script_addr=" MK_STR(MV_SCRIPT_ADDR) "\0"              \
 430         "script_addr2=" MK_STR(MV_SCRIPT_ADDR2) "\0"            \
 431         "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0"           \
 432         "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0"   \
 433         "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0"           \
 434         "mv_initrd_addr_ram=" MK_STR(MV_INITRD_ADDR_RAM) "\0"   \
 435         "mv_initrd_length=" MK_STR(MV_INITRD_LENGTH) "\0"       \
 436         "mv_dtb_addr=" MK_STR(MV_DTB_ADDR) "\0"                 \
 437         "mv_dtb_addr_ram=" MK_STR(MV_DTB_ADDR_RAM) "\0"         \
 438         "dtb_name=" MK_STR(MV_DTB_NAME) "\0"                    \
 439         "mv_version=" U_BOOT_VERSION "\0"                       \
 440         "dhcp_client_id=" MK_STR(MV_CI) "\0"                    \
 441         "dhcp_vendor-class-identifier=" MK_STR(MV_VCI) "\0"     \
 442         "netretry=no\0"                                         \
 443         "use_static_ipaddr=no\0"                                \
 444         "static_ipaddr=192.168.90.10\0"                         \
 445         "static_netmask=255.255.255.0\0"                        \
 446         "static_gateway=0.0.0.0\0"                              \
 447         "initrd_name=uInitrd.mvBL-M7-rfs\0"                     \
 448         "zcip=no\0"                                             \
 449         "netboot=yes\0"                                         \
 450         "mvtest=Ff\0"                                           \
 451         "tried_bootfromflash=no\0"                              \
 452         "tried_bootfromnet=no\0"                                \
 453         "bootfile=mvblm72625.boot\0"                            \
 454         "use_dhcp=yes\0"                                        \
 455         "gev_start=yes\0"                                       \
 456         "mvbcdma_debug=0\0"                                     \
 457         "mvbcia_debug=0\0"                                      \
 458         "propdev_debug=0\0"                                     \
 459         "gevss_debug=0\0"                                       \
 460         "watchdog=0\0"                                          \
 461         "usb_dr_mode=host\0"                                    \
 462         "sensor_cnt=2\0"                                        \
 463         ""
 464
 465 #define CONFIG_FPGA_COUNT       1
 466 #define CONFIG_FPGA             CONFIG_SYS_ALTERA_CYCLON2
 467 #define CONFIG_FPGA_ALTERA
 468 #define CONFIG_FPGA_CYCLON2
 469
 470 #endif