include/configs/MPC8569MDS.h

   1 /*
   2  * Copyright 2009-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * mpc8569mds board configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_SYS_SRIO
  14 #define CONFIG_SRIO1                    /* SRIO port 1 */
  15
  16 #define CONFIG_PCIE1            1       /* PCIE controller */
  17 #define CONFIG_FSL_PCI_INIT     1       /* use common fsl pci init code */
  18 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  19 #define CONFIG_FSL_PCIE_RESET   1       /* need PCIe reset errata */
  20 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  21 #define CONFIG_QE                       /* Enable QE */
  22 #define CONFIG_ENV_OVERWRITE
  23
  24 #ifndef __ASSEMBLY__
  25 extern unsigned long get_clock_freq(void);
  26 #endif
  27 /* Replace a call to get_clock_freq (after it is implemented)*/
  28 #define CONFIG_SYS_CLK_FREQ     66666666
  29 #define CONFIG_DDR_CLK_FREQ     CONFIG_SYS_CLK_FREQ
  30
  31 #ifdef CONFIG_ATM
  32 #define CONFIG_PQ_MDS_PIB
  33 #define CONFIG_PQ_MDS_PIB_ATM
  34 #endif
  35
  36 /*
  37  * These can be toggled for performance analysis, otherwise use default.
  38  */
  39 #define CONFIG_L2_CACHE                         /* toggle L2 cache      */
  40 #define CONFIG_BTB                              /* toggle branch predition */
  41
  42 #ifndef CONFIG_SYS_TEXT_BASE
  43 #define CONFIG_SYS_TEXT_BASE    0xfff80000
  44 #endif
  45
  46 #ifndef CONFIG_SYS_MONITOR_BASE
  47 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  48 #endif
  49
  50 /*
  51  * Only possible on E500 Version 2 or newer cores.
  52  */
  53 #define CONFIG_ENABLE_36BIT_PHYS        1
  54
  55 #define CONFIG_BOARD_EARLY_INIT_R       1
  56 #define CONFIG_HWCONFIG
  57
  58 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  59 #define CONFIG_SYS_MEMTEST_END          0x00400000
  60
  61 /*
  62  * Config the L2 Cache as L2 SRAM
  63  */
  64 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
  65 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
  66 #define CONFIG_SYS_L2_SIZE              (512 << 10)
  67 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
  68
  69 #define CONFIG_SYS_CCSRBAR              0xe0000000
  70 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  71
  72 #if defined(CONFIG_NAND_SPL)
  73 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  74 #endif
  75
  76 /* DDR Setup */
  77 #undef CONFIG_FSL_DDR_INTERACTIVE
  78 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup*/
  79 #define CONFIG_DDR_SPD
  80 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER       /* DDR controller or DMA? */
  81
  82 #define CONFIG_MEM_INIT_VALUE   0xDeadBeef
  83
  84 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  85                                         /* DDR is system memory*/
  86 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  87
  88 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  89 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
  90
  91 /* I2C addresses of SPD EEPROMs */
  92 #define SPD_EEPROM_ADDRESS    0x51    /* CTLR 0 DIMM 0 */
  93
  94 /* These are used when DDR doesn't use SPD.  */
  95 #define CONFIG_SYS_SDRAM_SIZE           1024            /* DDR is 1024MB */
  96 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
  97 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
  98 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
  99 #define CONFIG_SYS_DDR_TIMING_0         0x00330004
 100 #define CONFIG_SYS_DDR_TIMING_1         0x6F6B4644
 101 #define CONFIG_SYS_DDR_TIMING_2         0x002888D0
 102 #define CONFIG_SYS_DDR_SDRAM_CFG        0x47000000
 103 #define CONFIG_SYS_DDR_SDRAM_CFG_2      0x04401040
 104 #define CONFIG_SYS_DDR_SDRAM_MODE       0x40401521
 105 #define CONFIG_SYS_DDR_SDRAM_MODE_2     0x8000C000
 106 #define CONFIG_SYS_DDR_SDRAM_INTERVAL   0x03E00000
 107 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 108 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   0x01000000
 109 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 110 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 111 #define CONFIG_SYS_DDR_ZQ_CNTL          0x89080600
 112 #define CONFIG_SYS_DDR_WRLVL_CNTL       0x0655A604
 113 #define CONFIG_SYS_DDR_CDR_1            0x80040000
 114 #define CONFIG_SYS_DDR_CDR_2            0x00000000
 115 #define CONFIG_SYS_DDR_OCD_CTRL         0x00000000
 116 #define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
 117 #define CONFIG_SYS_DDR_CONTROL          0xc7000000      /* Type = DDR3 */
 118 #define CONFIG_SYS_DDR_CONTROL2         0x24400000
 119
 120 #define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
 121 #define CONFIG_SYS_DDR_ERR_DIS          0x00000000
 122 #define CONFIG_SYS_DDR_SBE              0x00010000
 123
 124 #undef CONFIG_CLOCKS_IN_MHZ
 125
 126 /*
 127  * Local Bus Definitions
 128  */
 129
 130 #define CONFIG_SYS_FLASH_BASE           0xfe000000      /* start of FLASH 32M */
 131 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 132
 133 #define CONFIG_SYS_BCSR_BASE            0xf8000000
 134 #define CONFIG_SYS_BCSR_BASE_PHYS       CONFIG_SYS_BCSR_BASE
 135
 136 /*Chip select 0 - Flash*/
 137 #define CONFIG_FLASH_BR_PRELIM          0xfe000801
 138 #define CONFIG_FLASH_OR_PRELIM          0xfe000ff7
 139
 140 /*Chip select 1 - BCSR*/
 141 #define CONFIG_SYS_BR1_PRELIM           0xf8000801
 142 #define CONFIG_SYS_OR1_PRELIM           0xffffe9f7
 143
 144 /*Chip select 4 - PIB*/
 145 #define CONFIG_SYS_BR4_PRELIM           0xf8008801
 146 #define CONFIG_SYS_OR4_PRELIM           0xffffe9f7
 147
 148 /*Chip select 5 - PIB*/
 149 #define CONFIG_SYS_BR5_PRELIM           0xf8010801
 150 #define CONFIG_SYS_OR5_PRELIM           0xffffe9f7
 151
 152 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 153 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* sectors per device */
 154 #undef  CONFIG_SYS_FLASH_CHECKSUM
 155 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 156 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 157
 158 #undef CONFIG_SYS_RAMBOOT
 159
 160 #define CONFIG_FLASH_CFI_DRIVER
 161 #define CONFIG_SYS_FLASH_CFI
 162 #define CONFIG_SYS_FLASH_EMPTY_INFO
 163
 164 /* Chip select 3 - NAND */
 165 #ifndef CONFIG_NAND_SPL
 166 #define CONFIG_SYS_NAND_BASE            0xFC000000
 167 #else
 168 #define CONFIG_SYS_NAND_BASE            0xFFF00000
 169 #endif
 170
 171 /* NAND boot: 4K NAND loader config */
 172 #define CONFIG_SYS_NAND_SPL_SIZE        0x1000
 173 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((512 << 10) - 0x2000)
 174 #define CONFIG_SYS_NAND_U_BOOT_DST      (CONFIG_SYS_INIT_L2_ADDR)
 175 #define CONFIG_SYS_NAND_U_BOOT_START \
 176         (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
 177 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (0)
 178 #define CONFIG_SYS_NAND_U_BOOT_RELOC    (CONFIG_SYS_INIT_L2_END - 0x2000)
 179 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 180
 181 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 182 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE, }
 183 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 184 #define CONFIG_NAND_FSL_ELBC            1
 185 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 186 #define CONFIG_SYS_NAND_BR_PRELIM       (CONFIG_SYS_NAND_BASE_PHYS \
 187                                 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
 188                                 | BR_PS_8            /* Port Size = 8 bit */ \
 189                                 | BR_MS_FCM          /* MSEL = FCM */ \
 190                                 | BR_V)              /* valid */
 191 #define CONFIG_SYS_NAND_OR_PRELIM       (0xFFFC0000          /* length 256K */ \
 192                                 | OR_FCM_CSCT \
 193                                 | OR_FCM_CST \
 194                                 | OR_FCM_CHT \
 195                                 | OR_FCM_SCY_1 \
 196                                 | OR_FCM_TRLX \
 197                                 | OR_FCM_EHTR)
 198
 199 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 200 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 201 #define CONFIG_SYS_BR3_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 202 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 203
 204 #define CONFIG_SYS_LBC_LCRR     0x00000004      /* LB clock ratio reg */
 205 #define CONFIG_SYS_LBC_LBCR     0x00040000      /* LB config reg */
 206 #define CONFIG_SYS_LBC_LSRT     0x20000000      /* LB sdram refresh timer */
 207 #define CONFIG_SYS_LBC_MRTPR    0x00000000      /* LB refresh timer prescal*/
 208
 209 #define CONFIG_SYS_INIT_RAM_LOCK        1
 210 #define CONFIG_SYS_INIT_RAM_ADDR        0xe4010000  /* Initial RAM address */
 211 #define CONFIG_SYS_INIT_RAM_SIZE        0x4000      /* Size of used area in RAM */
 212
 213 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 214                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 215 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 216
 217 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)    /* Reserve 256 kB for Mon */
 218 #define CONFIG_SYS_MALLOC_LEN   (512 * 1024)    /* Reserved for malloc */
 219
 220 /* Serial Port */
 221 #define CONFIG_CONS_INDEX               1
 222 #define CONFIG_SYS_NS16550_SERIAL
 223 #define CONFIG_SYS_NS16550_REG_SIZE    1
 224 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 225 #ifdef CONFIG_NAND_SPL
 226 #define CONFIG_NS16550_MIN_FUNCTIONS
 227 #endif
 228
 229 #define CONFIG_SYS_BAUDRATE_TABLE  \
 230         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 231
 232 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 233 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 234
 235 /*
 236  * I2C
 237  */
 238 #define CONFIG_SYS_I2C
 239 #define CONFIG_SYS_I2C_FSL
 240 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 241 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 242 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 243 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 244 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 245 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 246 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x69} }
 247
 248 /*
 249  * I2C2 EEPROM
 250  */
 251 #define CONFIG_ID_EEPROM
 252 #ifdef CONFIG_ID_EEPROM
 253 #define CONFIG_SYS_I2C_EEPROM_NXID
 254 #endif
 255 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52
 256 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 257 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 258
 259 #define PLPPAR1_I2C_BIT_MASK            0x0000000F
 260 #define PLPPAR1_I2C2_VAL                0x00000000
 261 #define PLPPAR1_ESDHC_VAL               0x0000000A
 262 #define PLPDIR1_I2C_BIT_MASK            0x0000000F
 263 #define PLPDIR1_I2C2_VAL                0x0000000F
 264 #define PLPDIR1_ESDHC_VAL               0x00000006
 265 #define PLPPAR1_UART0_BIT_MASK          0x00000fc0
 266 #define PLPPAR1_ESDHC_4BITS_VAL         0x00000a80
 267 #define PLPDIR1_UART0_BIT_MASK          0x00000fc0
 268 #define PLPDIR1_ESDHC_4BITS_VAL         0x00000a80
 269
 270 /*
 271  * General PCI
 272  * Memory Addresses are mapped 1-1. I/O is mapped from 0
 273  */
 274 #define CONFIG_SYS_PCIE1_NAME           "Slot"
 275 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xa0000000
 276 #define CONFIG_SYS_PCIE1_MEM_BUS        0xa0000000
 277 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xa0000000
 278 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 279 #define CONFIG_SYS_PCIE1_IO_VIRT        0xe2800000
 280 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 281 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe2800000
 282 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000      /* 8M */
 283
 284 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xC0000000
 285 #define CONFIG_SYS_SRIO1_MEM_BUS        0xC0000000
 286 #define CONFIG_SYS_SRIO1_MEM_PHYS       CONFIG_SYS_SRIO1_MEM_BUS
 287 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x20000000      /* 512M */
 288
 289 #ifdef CONFIG_QE
 290 /*
 291  * QE UEC ethernet configuration
 292  */
 293 #define CONFIG_SYS_UCC_RGMII_MODE       /* Set UCC work at RGMII by default */
 294 #undef CONFIG_SYS_UCC_RMII_MODE         /* Set UCC work at RMII mode */
 295
 296 #define CONFIG_MIIM_ADDRESS     (CONFIG_SYS_CCSRBAR + 0x82120)
 297 #define CONFIG_UEC_ETH
 298 #define CONFIG_ETHPRIME         "UEC0"
 299 #define CONFIG_PHY_MODE_NEED_CHANGE
 300
 301 #define CONFIG_UEC_ETH1         /* GETH1 */
 302 #define CONFIG_HAS_ETH0
 303
 304 #ifdef CONFIG_UEC_ETH1
 305 #define CONFIG_SYS_UEC1_UCC_NUM        0       /* UCC1 */
 306 #define CONFIG_SYS_UEC1_RX_CLK         QE_CLK_NONE
 307 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 308 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK12
 309 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 310 #define CONFIG_SYS_UEC1_PHY_ADDR       7
 311 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 312 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 313 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 314 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK16 /* CLK16 for RMII */
 315 #define CONFIG_SYS_UEC1_ETH_TYPE       FAST_ETH
 316 #define CONFIG_SYS_UEC1_PHY_ADDR       8        /* 0x8 for RMII */
 317 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 318 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 319 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 320 #endif /* CONFIG_UEC_ETH1 */
 321
 322 #define CONFIG_UEC_ETH2         /* GETH2 */
 323 #define CONFIG_HAS_ETH1
 324
 325 #ifdef CONFIG_UEC_ETH2
 326 #define CONFIG_SYS_UEC2_UCC_NUM        1       /* UCC2 */
 327 #define CONFIG_SYS_UEC2_RX_CLK         QE_CLK_NONE
 328 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 329 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK17
 330 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 331 #define CONFIG_SYS_UEC2_PHY_ADDR       1
 332 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 333 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 334 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 335 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK16 /* CLK 16 for RMII */
 336 #define CONFIG_SYS_UEC2_ETH_TYPE       FAST_ETH
 337 #define CONFIG_SYS_UEC2_PHY_ADDR       0x9      /* 0x9 for RMII */
 338 #define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 339 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
 340 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 341 #endif /* CONFIG_UEC_ETH2 */
 342
 343 #define CONFIG_UEC_ETH3         /* GETH3 */
 344 #define CONFIG_HAS_ETH2
 345
 346 #ifdef CONFIG_UEC_ETH3
 347 #define CONFIG_SYS_UEC3_UCC_NUM        2       /* UCC3 */
 348 #define CONFIG_SYS_UEC3_RX_CLK         QE_CLK_NONE
 349 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 350 #define CONFIG_SYS_UEC3_TX_CLK         QE_CLK12
 351 #define CONFIG_SYS_UEC3_ETH_TYPE       GIGA_ETH
 352 #define CONFIG_SYS_UEC3_PHY_ADDR       2
 353 #define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 354 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
 355 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 356 #define CONFIG_SYS_UEC3_TX_CLK          QE_CLK16 /* CLK_16 for RMII */
 357 #define CONFIG_SYS_UEC3_ETH_TYPE        FAST_ETH
 358 #define CONFIG_SYS_UEC3_PHY_ADDR        0xA     /* 0xA for RMII */
 359 #define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 360 #define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
 361 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 362 #endif /* CONFIG_UEC_ETH3 */
 363
 364 #define CONFIG_UEC_ETH4         /* GETH4 */
 365 #define CONFIG_HAS_ETH3
 366
 367 #ifdef CONFIG_UEC_ETH4
 368 #define CONFIG_SYS_UEC4_UCC_NUM        3       /* UCC4 */
 369 #define CONFIG_SYS_UEC4_RX_CLK         QE_CLK_NONE
 370 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 371 #define CONFIG_SYS_UEC4_TX_CLK         QE_CLK17
 372 #define CONFIG_SYS_UEC4_ETH_TYPE       GIGA_ETH
 373 #define CONFIG_SYS_UEC4_PHY_ADDR       3
 374 #define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 375 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
 376 #elif defined(CONFIG_SYS_UCC_RMII_MODE)
 377 #define CONFIG_SYS_UEC4_TX_CLK          QE_CLK16 /* CLK16 for RMII */
 378 #define CONFIG_SYS_UEC4_ETH_TYPE        FAST_ETH
 379 #define CONFIG_SYS_UEC4_PHY_ADDR        0xB     /* 0xB for RMII */
 380 #define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 381 #define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
 382 #endif /* CONFIG_SYS_UCC_RGMII_MODE */
 383 #endif /* CONFIG_UEC_ETH4 */
 384
 385 #undef CONFIG_UEC_ETH6         /* GETH6 */
 386 #define CONFIG_HAS_ETH5
 387
 388 #ifdef CONFIG_UEC_ETH6
 389 #define CONFIG_SYS_UEC6_UCC_NUM        5       /* UCC6 */
 390 #define CONFIG_SYS_UEC6_RX_CLK         QE_CLK_NONE
 391 #define CONFIG_SYS_UEC6_TX_CLK         QE_CLK_NONE
 392 #define CONFIG_SYS_UEC6_ETH_TYPE       GIGA_ETH
 393 #define CONFIG_SYS_UEC6_PHY_ADDR       4
 394 #define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
 395 #define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
 396 #endif /* CONFIG_UEC_ETH6 */
 397
 398 #undef CONFIG_UEC_ETH8         /* GETH8 */
 399 #define CONFIG_HAS_ETH7
 400
 401 #ifdef CONFIG_UEC_ETH8
 402 #define CONFIG_SYS_UEC8_UCC_NUM        7       /* UCC8 */
 403 #define CONFIG_SYS_UEC8_RX_CLK         QE_CLK_NONE
 404 #define CONFIG_SYS_UEC8_TX_CLK         QE_CLK_NONE
 405 #define CONFIG_SYS_UEC8_ETH_TYPE       GIGA_ETH
 406 #define CONFIG_SYS_UEC8_PHY_ADDR       6
 407 #define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
 408 #define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
 409 #endif /* CONFIG_UEC_ETH8 */
 410
 411 #endif /* CONFIG_QE */
 412
 413 #if defined(CONFIG_PCI)
 414 #undef CONFIG_EEPRO100
 415 #undef CONFIG_TULIP
 416
 417 #undef CONFIG_PCI_SCAN_SHOW             /* show pci devices on startup */
 418
 419 #endif  /* CONFIG_PCI */
 420
 421 /*
 422  * Environment
 423  */
 424 #if defined(CONFIG_SYS_RAMBOOT)
 425 #else
 426 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 427 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 428 #define CONFIG_ENV_SIZE         0x2000
 429 #endif
 430
 431 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 432 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 433
 434 /* QE microcode/firmware address */
 435 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 436 #define CONFIG_SYS_QE_FW_ADDR   0xfff00000
 437
 438 /*
 439  * BOOTP options
 440  */
 441 #define CONFIG_BOOTP_BOOTFILESIZE
 442 #define CONFIG_BOOTP_BOOTPATH
 443 #define CONFIG_BOOTP_GATEWAY
 444 #define CONFIG_BOOTP_HOSTNAME
 445
 446 #undef CONFIG_WATCHDOG                  /* watchdog disabled */
 447
 448 #ifdef CONFIG_MMC
 449 #define CONFIG_FSL_ESDHC
 450 #define CONFIG_FSL_ESDHC_PIN_MUX
 451 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 452 #endif
 453
 454 /*
 455  * Miscellaneous configurable options
 456  */
 457 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 458 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 459 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 460 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 461 #if defined(CONFIG_CMD_KGDB)
 462 #define CONFIG_SYS_CBSIZE       2048            /* Console I/O Buffer Size */
 463 #else
 464 #define CONFIG_SYS_CBSIZE       512             /* Console I/O Buffer Size */
 465 #endif
 466 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 467                                                 /* Print Buffer Size */
 468 #define CONFIG_SYS_MAXARGS      32              /* max number of command args */
 469 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 470                                                 /* Boot Argument Buffer Size */
 471
 472 /*
 473  * For booting Linux, the board info and command line data
 474  * have to be in the first 64 MB of memory, since this is
 475  * the maximum mapped by the Linux kernel during initialization.
 476  */
 477 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux*/
 478 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 479
 480 #if defined(CONFIG_CMD_KGDB)
 481 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 482 #endif
 483
 484 /*
 485  * Environment Configuration
 486  */
 487 #define CONFIG_HOSTNAME mpc8569mds
 488 #define CONFIG_ROOTPATH  "/nfsroot"
 489 #define CONFIG_BOOTFILE  "your.uImage"
 490
 491 #define CONFIG_SERVERIP  192.168.1.1
 492 #define CONFIG_GATEWAYIP 192.168.1.1
 493 #define CONFIG_NETMASK   255.255.255.0
 494
 495 #define CONFIG_LOADADDR  200000   /*default location for tftp and bootm*/
 496
 497 #undef  CONFIG_BOOTARGS           /* the boot command will set bootargs*/
 498
 499 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 500         "netdev=eth0\0"                                                 \
 501         "consoledev=ttyS0\0"                                            \
 502         "ramdiskaddr=600000\0"                                          \
 503         "ramdiskfile=your.ramdisk.u-boot\0"                             \
 504         "fdtaddr=400000\0"                                              \
 505         "fdtfile=your.fdt.dtb\0"                                        \
 506         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 507         "nfsroot=$serverip:$rootpath "                                  \
 508         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 509         "console=$consoledev,$baudrate $othbootargs\0"                  \
 510         "ramargs=setenv bootargs root=/dev/ram rw "                     \
 511         "console=$consoledev,$baudrate $othbootargs\0"                  \
 512
 513 #define CONFIG_NFSBOOTCOMMAND                                           \
 514         "run nfsargs;"                                                  \
 515         "tftp $loadaddr $bootfile;"                                     \
 516         "tftp $fdtaddr $fdtfile;"                                       \
 517         "bootm $loadaddr - $fdtaddr"
 518
 519 #define CONFIG_RAMBOOTCOMMAND                                           \
 520         "run ramargs;"                                                  \
 521         "tftp $ramdiskaddr $ramdiskfile;"                               \
 522         "tftp $loadaddr $bootfile;"                                     \
 523         "bootm $loadaddr $ramdiskaddr"
 524
 525 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 526
 527 #endif  /* __CONFIG_H */