include/configs/MPC832XEMDS.h

   1 /*
   2  * Copyright (C) 2006 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * High Level Configuration Options
  12  */
  13 #define CONFIG_E300             1       /* E300 family */
  14 #define CONFIG_QE               1       /* Has QE */
  15 #define CONFIG_MPC832x          1       /* MPC832x CPU specific */
  16 #define CONFIG_MPC832XEMDS      1       /* MPC832XEMDS board specific */
  17
  18 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  19
  20 /*
  21  * System Clock Setup
  22  */
  23 #ifdef CONFIG_PCISLAVE
  24 #define CONFIG_83XX_PCICLK      66000000        /* in HZ */
  25 #else
  26 #define CONFIG_83XX_CLKIN       66000000        /* in Hz */
  27 #endif
  28
  29 #ifndef CONFIG_SYS_CLK_FREQ
  30 #define CONFIG_SYS_CLK_FREQ     66000000
  31 #endif
  32
  33 /*
  34  * Hardware Reset Configuration Word
  35  */
  36 #define CONFIG_SYS_HRCW_LOW (\
  37         HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
  38         HRCWL_DDR_TO_SCB_CLK_2X1 |\
  39         HRCWL_VCO_1X2 |\
  40         HRCWL_CSB_TO_CLKIN_2X1 |\
  41         HRCWL_CORE_TO_CSB_2X1 |\
  42         HRCWL_CE_PLL_VCO_DIV_2 |\
  43         HRCWL_CE_PLL_DIV_1X1 |\
  44         HRCWL_CE_TO_PLL_1X3)
  45
  46 #ifdef CONFIG_PCISLAVE
  47 #define CONFIG_SYS_HRCW_HIGH (\
  48         HRCWH_PCI_AGENT |\
  49         HRCWH_PCI1_ARBITER_DISABLE |\
  50         HRCWH_CORE_ENABLE |\
  51         HRCWH_FROM_0XFFF00100 |\
  52         HRCWH_BOOTSEQ_DISABLE |\
  53         HRCWH_SW_WATCHDOG_DISABLE |\
  54         HRCWH_ROM_LOC_LOCAL_16BIT |\
  55         HRCWH_BIG_ENDIAN |\
  56         HRCWH_LALE_NORMAL)
  57 #else
  58 #define CONFIG_SYS_HRCW_HIGH (\
  59         HRCWH_PCI_HOST |\
  60         HRCWH_PCI1_ARBITER_ENABLE |\
  61         HRCWH_CORE_ENABLE |\
  62         HRCWH_FROM_0X00000100 |\
  63         HRCWH_BOOTSEQ_DISABLE |\
  64         HRCWH_SW_WATCHDOG_DISABLE |\
  65         HRCWH_ROM_LOC_LOCAL_16BIT |\
  66         HRCWH_BIG_ENDIAN |\
  67         HRCWH_LALE_NORMAL)
  68 #endif
  69
  70 /*
  71  * System IO Config
  72  */
  73 #define CONFIG_SYS_SICRL                0x00000000
  74
  75 #define CONFIG_BOARD_EARLY_INIT_R
  76
  77 /*
  78  * IMMR new address
  79  */
  80 #define CONFIG_SYS_IMMR         0xE0000000
  81
  82 /*
  83  * DDR Setup
  84  */
  85 #define CONFIG_SYS_DDR_BASE     0x00000000      /* DDR is system memory */
  86 #define CONFIG_SYS_SDRAM_BASE   CONFIG_SYS_DDR_BASE
  87 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  88 #define CONFIG_SYS_DDRCDR       0x73000002      /* DDR II voltage is 1.8V */
  89
  90 #undef CONFIG_SPD_EEPROM
  91 #if defined(CONFIG_SPD_EEPROM)
  92 /* Determine DDR configuration from I2C interface
  93  */
  94 #define SPD_EEPROM_ADDRESS      0x51    /* DDR SODIMM */
  95 #else
  96 /* Manually set up DDR parameters
  97  */
  98 #define CONFIG_SYS_DDR_SIZE             128     /* MB */
  99 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN \
 100                                         | CSCONFIG_AP \
 101                                         | CSCONFIG_ODT_WR_CFG \
 102                                         | CSCONFIG_ROW_BIT_13 \
 103                                         | CSCONFIG_COL_BIT_10)
 104                                         /* 0x80840102 */
 105 #define CONFIG_SYS_DDR_TIMING_0         ((0 << TIMING_CFG0_RWT_SHIFT) \
 106                                         | (0 << TIMING_CFG0_WRT_SHIFT) \
 107                                         | (0 << TIMING_CFG0_RRT_SHIFT) \
 108                                         | (0 << TIMING_CFG0_WWT_SHIFT) \
 109                                         | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
 110                                         | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
 111                                         | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
 112                                         | (2 << TIMING_CFG0_MRS_CYC_SHIFT))
 113                                         /* 0x00220802 */
 114 #define CONFIG_SYS_DDR_TIMING_1         ((3 << TIMING_CFG1_PRETOACT_SHIFT) \
 115                                         | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \
 116                                         | (3 << TIMING_CFG1_ACTTORW_SHIFT) \
 117                                         | (5 << TIMING_CFG1_CASLAT_SHIFT) \
 118                                         | (13 << TIMING_CFG1_REFREC_SHIFT) \
 119                                         | (3 << TIMING_CFG1_WRREC_SHIFT) \
 120                                         | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
 121                                         | (2 << TIMING_CFG1_WRTORD_SHIFT))
 122                                         /* 0x3935D322 */
 123 #define CONFIG_SYS_DDR_TIMING_2         ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \
 124                                 | (31 << TIMING_CFG2_CPO_SHIFT) \
 125                                 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
 126                                 | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
 127                                 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
 128                                 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
 129                                 | (10 << TIMING_CFG2_FOUR_ACT_SHIFT))
 130                                 /* 0x0F9048CA */
 131 #define CONFIG_SYS_DDR_TIMING_3         0x00000000
 132 #define CONFIG_SYS_DDR_CLK_CNTL         DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
 133                                         /* 0x02000000 */
 134 #define CONFIG_SYS_DDR_MODE             ((0x4440 << SDRAM_MODE_ESD_SHIFT) \
 135                                         | (0x0232 << SDRAM_MODE_SD_SHIFT))
 136                                         /* 0x44400232 */
 137 #define CONFIG_SYS_DDR_MODE2            0x8000c000
 138 #define CONFIG_SYS_DDR_INTERVAL         ((800 << SDRAM_INTERVAL_REFINT_SHIFT) \
 139                                         | (100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
 140                                         /* 0x03200064 */
 141 #define CONFIG_SYS_DDR_CS0_BNDS         0x00000007
 142 #define CONFIG_SYS_DDR_SDRAM_CFG        (SDRAM_CFG_SREN \
 143                                         | SDRAM_CFG_SDRAM_TYPE_DDR2 \
 144                                         | SDRAM_CFG_32_BE)
 145                                         /* 0x43080000 */
 146 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
 147 #endif
 148
 149 /*
 150  * Memory test
 151  */
 152 #undef CONFIG_SYS_DRAM_TEST             /* memory test, takes time */
 153 #define CONFIG_SYS_MEMTEST_START        0x00000000      /* memtest region */
 154 #define CONFIG_SYS_MEMTEST_END          0x00100000
 155
 156 /*
 157  * The reserved memory
 158  */
 159 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 160
 161 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 162 #define CONFIG_SYS_RAMBOOT
 163 #else
 164 #undef  CONFIG_SYS_RAMBOOT
 165 #endif
 166
 167 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 168 #define CONFIG_SYS_MONITOR_LEN  (512 * 1024)    /* Reserve 512 kB for Mon */
 169 #define CONFIG_SYS_MALLOC_LEN   (256 * 1024)    /* Reserved for malloc */
 170
 171 /*
 172  * Initial RAM Base Address Setup
 173  */
 174 #define CONFIG_SYS_INIT_RAM_LOCK        1
 175 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000      /* Initial RAM addr */
 176 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000  /* Size of used area in RAM */
 177 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 178                         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 179
 180 /*
 181  * Local Bus Configuration & Clock Setup
 182  */
 183 #define CONFIG_SYS_LCRR_DBYP            LCRR_DBYP
 184 #define CONFIG_SYS_LCRR_CLKDIV          LCRR_CLKDIV_2
 185 #define CONFIG_SYS_LBC_LBCR             0x00000000
 186
 187 /*
 188  * FLASH on the Local Bus
 189  */
 190 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 191 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 192 #define CONFIG_SYS_FLASH_BASE   0xFE000000      /* FLASH base address */
 193 #define CONFIG_SYS_FLASH_SIZE   16      /* FLASH size is 16M */
 194 #define CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w Flash protection. */
 195
 196                                         /* Window base at flash base */
 197 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE
 198 #define CONFIG_SYS_LBLAWAR0_PRELIM      (LBLAWAR_EN | LBLAWAR_32MB)
 199
 200 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE \
 201                                 | BR_PS_16      /* 16 bit port */ \
 202                                 | BR_MS_GPCM    /* MSEL = GPCM */ \
 203                                 | BR_V)         /* valid */
 204 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \
 205                                 | OR_GPCM_XAM \
 206                                 | OR_GPCM_CSNT \
 207                                 | OR_GPCM_ACS_DIV2 \
 208                                 | OR_GPCM_XACS \
 209                                 | OR_GPCM_SCY_15 \
 210                                 | OR_GPCM_TRLX_SET \
 211                                 | OR_GPCM_EHTR_SET \
 212                                 | OR_GPCM_EAD)
 213                                 /* 0xfe006ff7 */
 214
 215 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 216 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* sectors per device */
 217
 218 #undef CONFIG_SYS_FLASH_CHECKSUM
 219
 220 /*
 221  * BCSR on the Local Bus
 222  */
 223 #define CONFIG_SYS_BCSR                 0xF8000000
 224                                         /* Access window base at BCSR base */
 225 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_BCSR
 226 #define CONFIG_SYS_LBLAWAR1_PRELIM      (LBLAWAR_EN | LBLAWAR_32KB)
 227
 228 #define CONFIG_SYS_BR1_PRELIM           (CONFIG_SYS_BCSR \
 229                                         | BR_PS_8 \
 230                                         | BR_MS_GPCM \
 231                                         | BR_V)
 232 #define CONFIG_SYS_OR1_PRELIM           (OR_AM_32KB \
 233                                         | OR_GPCM_XAM \
 234                                         | OR_GPCM_CSNT \
 235                                         | OR_GPCM_XACS \
 236                                         | OR_GPCM_SCY_15 \
 237                                         | OR_GPCM_TRLX_SET \
 238                                         | OR_GPCM_EHTR_SET \
 239                                         | OR_GPCM_EAD)
 240                                         /* 0xFFFFE9F7 */
 241
 242 /*
 243  * Windows to access PIB via local bus
 244  */
 245                                         /* PIB window base 0xF8008000 */
 246 #define CONFIG_SYS_PIB_BASE             0xF8008000
 247 #define CONFIG_SYS_PIB_WINDOW_SIZE      (32 * 1024)
 248 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_PIB_BASE
 249 #define CONFIG_SYS_LBLAWAR3_PRELIM      (LBLAWAR_EN | LBLAWAR_64KB)
 250
 251 /*
 252  * CS2 on Local Bus, to PIB
 253  */
 254 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_PIB_BASE \
 255                                 | BR_PS_8 \
 256                                 | BR_MS_GPCM \
 257                                 | BR_V)
 258                                 /* 0xF8008801 */
 259 #define CONFIG_SYS_OR2_PRELIM   (P2SZ_TO_AM(CONFIG_SYS_PIB_WINDOW_SIZE) \
 260                                 | OR_GPCM_XAM \
 261                                 | OR_GPCM_CSNT \
 262                                 | OR_GPCM_XACS \
 263                                 | OR_GPCM_SCY_15 \
 264                                 | OR_GPCM_TRLX_SET \
 265                                 | OR_GPCM_EHTR_SET \
 266                                 | OR_GPCM_EAD)
 267                                 /* 0xffffe9f7 */
 268
 269 /*
 270  * CS3 on Local Bus, to PIB
 271  */
 272 #define CONFIG_SYS_BR3_PRELIM   ((CONFIG_SYS_PIB_BASE + \
 273                                         CONFIG_SYS_PIB_WINDOW_SIZE) \
 274                                 | BR_PS_8 \
 275                                 | BR_MS_GPCM \
 276                                 | BR_V)
 277                                 /* 0xF8010801 */
 278 #define CONFIG_SYS_OR3_PRELIM   (P2SZ_TO_AM(CONFIG_SYS_PIB_WINDOW_SIZE) \
 279                                 | OR_GPCM_XAM \
 280                                 | OR_GPCM_CSNT \
 281                                 | OR_GPCM_XACS \
 282                                 | OR_GPCM_SCY_15 \
 283                                 | OR_GPCM_TRLX_SET \
 284                                 | OR_GPCM_EHTR_SET \
 285                                 | OR_GPCM_EAD)
 286                                 /* 0xffffe9f7 */
 287
 288 /*
 289  * Serial Port
 290  */
 291 #define CONFIG_CONS_INDEX       1
 292 #define CONFIG_SYS_NS16550_SERIAL
 293 #define CONFIG_SYS_NS16550_REG_SIZE     1
 294 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 295
 296 #define CONFIG_SYS_BAUDRATE_TABLE  \
 297                 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 298
 299 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 300 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 301
 302 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 303 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support   */
 304
 305 /* I2C */
 306 #define CONFIG_SYS_I2C
 307 #define CONFIG_SYS_I2C_FSL
 308 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 309 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 310 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 311 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x51} }
 312
 313 /*
 314  * Config on-board RTC
 315  */
 316 #define CONFIG_RTC_DS1374               /* use ds1374 rtc via i2c */
 317 #define CONFIG_SYS_I2C_RTC_ADDR 0x68    /* at address 0x68 */
 318
 319 /*
 320  * General PCI
 321  * Addresses are mapped 1-1.
 322  */
 323 #define CONFIG_SYS_PCI1_MEM_BASE        0x80000000
 324 #define CONFIG_SYS_PCI1_MEM_PHYS        CONFIG_SYS_PCI1_MEM_BASE
 325 #define CONFIG_SYS_PCI1_MEM_SIZE        0x10000000      /* 256M */
 326 #define CONFIG_SYS_PCI1_MMIO_BASE       0x90000000
 327 #define CONFIG_SYS_PCI1_MMIO_PHYS       CONFIG_SYS_PCI1_MMIO_BASE
 328 #define CONFIG_SYS_PCI1_MMIO_SIZE       0x10000000      /* 256M */
 329 #define CONFIG_SYS_PCI1_IO_BASE         0x00000000
 330 #define CONFIG_SYS_PCI1_IO_PHYS         0xE0300000
 331 #define CONFIG_SYS_PCI1_IO_SIZE         0x100000        /* 1M */
 332
 333 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL    CONFIG_SYS_SDRAM_BASE
 334 #define CONFIG_SYS_PCI_SLV_MEM_BUS      0x00000000
 335 #define CONFIG_SYS_PCI_SLV_MEM_SIZE     0x80000000
 336
 337 #ifdef CONFIG_PCI
 338 #define CONFIG_PCI_INDIRECT_BRIDGE
 339
 340 #define CONFIG_83XX_PCI_STREAMING
 341
 342 #undef CONFIG_EEPRO100
 343 #undef CONFIG_PCI_SCAN_SHOW     /* show pci devices on startup */
 344 #define CONFIG_SYS_PCI_SUBSYS_VENDORID  0x1957  /* Freescale */
 345
 346 #endif  /* CONFIG_PCI */
 347
 348 /*
 349  * QE UEC ethernet configuration
 350  */
 351 #define CONFIG_UEC_ETH
 352 #define CONFIG_ETHPRIME         "UEC0"
 353
 354 #define CONFIG_UEC_ETH1         /* ETH3 */
 355
 356 #ifdef CONFIG_UEC_ETH1
 357 #define CONFIG_SYS_UEC1_UCC_NUM 2       /* UCC3 */
 358 #define CONFIG_SYS_UEC1_RX_CLK          QE_CLK9
 359 #define CONFIG_SYS_UEC1_TX_CLK          QE_CLK10
 360 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 361 #define CONFIG_SYS_UEC1_PHY_ADDR        3
 362 #define CONFIG_SYS_UEC1_INTERFACE_TYPE  PHY_INTERFACE_MODE_MII
 363 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 364 #endif
 365
 366 #define CONFIG_UEC_ETH2         /* ETH4 */
 367
 368 #ifdef CONFIG_UEC_ETH2
 369 #define CONFIG_SYS_UEC2_UCC_NUM 3       /* UCC4 */
 370 #define CONFIG_SYS_UEC2_RX_CLK          QE_CLK7
 371 #define CONFIG_SYS_UEC2_TX_CLK          QE_CLK8
 372 #define CONFIG_SYS_UEC2_ETH_TYPE        FAST_ETH
 373 #define CONFIG_SYS_UEC2_PHY_ADDR        4
 374 #define CONFIG_SYS_UEC2_INTERFACE_TYPE  PHY_INTERFACE_MODE_MII
 375 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
 376 #endif
 377
 378 /*
 379  * Environment
 380  */
 381 #ifndef CONFIG_SYS_RAMBOOT
 382         #define CONFIG_ENV_ADDR         \
 383                         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 384         #define CONFIG_ENV_SECT_SIZE    0x20000
 385         #define CONFIG_ENV_SIZE         0x2000
 386 #else
 387         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 388         #define CONFIG_ENV_SIZE         0x2000
 389 #endif
 390
 391 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download */
 392 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 393
 394 /*
 395  * BOOTP options
 396  */
 397 #define CONFIG_BOOTP_BOOTFILESIZE
 398 #define CONFIG_BOOTP_BOOTPATH
 399 #define CONFIG_BOOTP_GATEWAY
 400 #define CONFIG_BOOTP_HOSTNAME
 401
 402 /*
 403  * Command line configuration.
 404  */
 405
 406 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 407
 408 /*
 409  * Miscellaneous configurable options
 410  */
 411 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 412 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 413
 414 #if defined(CONFIG_CMD_KGDB)
 415         #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
 416 #else
 417         #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 418 #endif
 419
 420                                 /* Print Buffer Size */
 421 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 422 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 423                                 /* Boot Argument Buffer Size */
 424 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 425
 426 /*
 427  * For booting Linux, the board info and command line data
 428  * have to be in the first 256 MB of memory, since this is
 429  * the maximum mapped by the Linux kernel during initialization.
 430  */
 431                                         /* Initial Memory map for Linux */
 432 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)
 433 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 434
 435 /*
 436  * Core HID Setup
 437  */
 438 #define CONFIG_SYS_HID0_INIT    0x000000000
 439 #define CONFIG_SYS_HID0_FINAL   (HID0_ENABLE_MACHINE_CHECK | \
 440                                  HID0_ENABLE_INSTRUCTION_CACHE)
 441 #define CONFIG_SYS_HID2         HID2_HBE
 442
 443 /*
 444  * MMU Setup
 445  */
 446
 447 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 448
 449 /* DDR: cache cacheable */
 450 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE \
 451                                 | BATL_PP_RW \
 452                                 | BATL_MEMCOHERENCE)
 453 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE \
 454                                 | BATU_BL_256M \
 455                                 | BATU_VS \
 456                                 | BATU_VP)
 457 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 458 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 459
 460 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
 461 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_IMMR \
 462                                 | BATL_PP_RW \
 463                                 | BATL_CACHEINHIBIT \
 464                                 | BATL_GUARDEDSTORAGE)
 465 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_IMMR \
 466                                 | BATU_BL_4M \
 467                                 | BATU_VS \
 468                                 | BATU_VP)
 469 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 470 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 471
 472 /* BCSR: cache-inhibit and guarded */
 473 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_BCSR \
 474                                 | BATL_PP_RW \
 475                                 | BATL_CACHEINHIBIT \
 476                                 | BATL_GUARDEDSTORAGE)
 477 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_BCSR \
 478                                 | BATU_BL_128K \
 479                                 | BATU_VS \
 480                                 | BATU_VP)
 481 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 482 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 483
 484 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 485 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_FLASH_BASE \
 486                                 | BATL_PP_RW \
 487                                 | BATL_MEMCOHERENCE)
 488 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_FLASH_BASE \
 489                                 | BATU_BL_32M \
 490                                 | BATU_VS \
 491                                 | BATU_VP)
 492 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_FLASH_BASE \
 493                                 | BATL_PP_RW \
 494                                 | BATL_CACHEINHIBIT \
 495                                 | BATL_GUARDEDSTORAGE)
 496 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 497
 498 #define CONFIG_SYS_IBAT4L       (0)
 499 #define CONFIG_SYS_IBAT4U       (0)
 500 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 501 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 502
 503 /* Stack in dcache: cacheable, no memory coherence */
 504 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW)
 505 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_INIT_RAM_ADDR \
 506                                 | BATU_BL_128K \
 507                                 | BATU_VS \
 508                                 | BATU_VP)
 509 #define CONFIG_SYS_DBAT5L       CONFIG_SYS_IBAT5L
 510 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 511
 512 #ifdef CONFIG_PCI
 513 /* PCI MEM space: cacheable */
 514 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_PCI1_MEM_PHYS \
 515                                 | BATL_PP_RW \
 516                                 | BATL_MEMCOHERENCE)
 517 #define CONFIG_SYS_IBAT6U       (CONFIG_SYS_PCI1_MEM_PHYS \
 518                                 | BATU_BL_256M \
 519                                 | BATU_VS \
 520                                 | BATU_VP)
 521 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 522 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 523 /* PCI MMIO space: cache-inhibit and guarded */
 524 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_PCI1_MMIO_PHYS \
 525                                 | BATL_PP_RW \
 526                                 | BATL_CACHEINHIBIT \
 527                                 | BATL_GUARDEDSTORAGE)
 528 #define CONFIG_SYS_IBAT7U       (CONFIG_SYS_PCI1_MMIO_PHYS \
 529                                 | BATU_BL_256M \
 530                                 | BATU_VS \
 531                                 | BATU_VP)
 532 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 533 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 534 #else
 535 #define CONFIG_SYS_IBAT6L       (0)
 536 #define CONFIG_SYS_IBAT6U       (0)
 537 #define CONFIG_SYS_IBAT7L       (0)
 538 #define CONFIG_SYS_IBAT7U       (0)
 539 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 540 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 541 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 542 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 543 #endif
 544
 545 #if defined(CONFIG_CMD_KGDB)
 546 #define CONFIG_KGDB_BAUDRATE    230400  /* speed of kgdb serial port */
 547 #endif
 548
 549 /*
 550  * Environment Configuration
 551  */ #define CONFIG_ENV_OVERWRITE
 552
 553 #if defined(CONFIG_UEC_ETH)
 554 #define CONFIG_HAS_ETH0
 555 #define CONFIG_HAS_ETH1
 556 #endif
 557
 558 #define CONFIG_LOADADDR 800000  /* default location for tftp and bootm */
 559
 560 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 561         "netdev=eth0\0"                                                 \
 562         "consoledev=ttyS0\0"                                            \
 563         "ramdiskaddr=1000000\0"                                         \
 564         "ramdiskfile=ramfs.83xx\0"                                      \
 565         "fdtaddr=780000\0"                                              \
 566         "fdtfile=mpc832x_mds.dtb\0"                                     \
 567         ""
 568
 569 #define CONFIG_NFSBOOTCOMMAND                                           \
 570         "setenv bootargs root=/dev/nfs rw "                             \
 571                 "nfsroot=$serverip:$rootpath "                          \
 572                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"   \
 573                                                         "$netdev:off "  \
 574                 "console=$consoledev,$baudrate $othbootargs;"           \
 575         "tftp $loadaddr $bootfile;"                                     \
 576         "tftp $fdtaddr $fdtfile;"                                       \
 577         "bootm $loadaddr - $fdtaddr"
 578
 579 #define CONFIG_RAMBOOTCOMMAND                                           \
 580         "setenv bootargs root=/dev/ram rw "                             \
 581                 "console=$consoledev,$baudrate $othbootargs;"           \
 582         "tftp $ramdiskaddr $ramdiskfile;"                               \
 583         "tftp $loadaddr $bootfile;"                                     \
 584         "tftp $fdtaddr $fdtfile;"                                       \
 585         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 586
 587 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 588
 589 #endif  /* __CONFIG_H */