include/configs/M5208EVBE.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuation settings for the Freescale MCF5208EVBe.
   4  *
   5  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
   6  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   7  */
   8
   9 #ifndef _M5208EVBE_H
  10 #define _M5208EVBE_H
  11
  12 /*
  13  * High Level Configuration Options
  14  * (easy to change)
  15  */
  16 #define CONFIG_SYS_UART_PORT            (0)
  17
  18 #define CONFIG_WATCHDOG_TIMEOUT         5000
  19
  20 #ifdef CONFIG_MCFFEC
  21 #       define CONFIG_MII_INIT          1
  22 #       define CONFIG_SYS_DISCOVER_PHY
  23 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  24 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  25 #       define CONFIG_HAS_ETH1
  26 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  27 #       ifndef CONFIG_SYS_DISCOVER_PHY
  28 #               define FECDUPLEX        FULL
  29 #               define FECSPEED         _100BASET
  30 #       else
  31 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  32 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  33 #               endif
  34 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  35 #endif
  36
  37 /* Timer */
  38 #define CONFIG_MCFTMR
  39
  40 /* I2C */
  41
  42 #define CONFIG_UDP_CHECKSUM
  43
  44 #ifdef CONFIG_MCFFEC
  45 #       define CONFIG_IPADDR    192.162.1.2
  46 #       define CONFIG_NETMASK   255.255.255.0
  47 #       define CONFIG_SERVERIP  192.162.1.1
  48 #       define CONFIG_GATEWAYIP 192.162.1.1
  49 #endif                          /* CONFIG_MCFFEC */
  50
  51 #define CONFIG_HOSTNAME         "M5208EVBe"
  52 #define CONFIG_EXTRA_ENV_SETTINGS               \
  53         "netdev=eth0\0"                         \
  54         "loadaddr=40010000\0"                   \
  55         "u-boot=u-boot.bin\0"                   \
  56         "load=tftp ${loadaddr) ${u-boot}\0"     \
  57         "upd=run load; run prog\0"              \
  58         "prog=prot off 0 3ffff;"                \
  59         "era 0 3ffff;"                          \
  60         "cp.b ${loadaddr} 0 ${filesize};"       \
  61         "save\0"                                \
  62         ""
  63
  64 #define CONFIG_PRAM             512     /* 512 KB */
  65
  66 #define CONFIG_SYS_CLK          166666666       /* CPU Core Clock */
  67 #define CONFIG_SYS_PLL_ODR      0x36
  68 #define CONFIG_SYS_PLL_FDR      0x7D
  69
  70 #define CONFIG_SYS_MBAR         0xFC000000
  71
  72 /*
  73  * Low Level Configuration Settings
  74  * (address mappings, register initial values, etc.)
  75  * You should know what you are doing if you make changes here.
  76  */
  77 /* Definitions for initial stack pointer and data area (in DPRAM) */
  78 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
  79 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000  /* Size of used area in internal SRAM */
  80 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
  81 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
  82 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
  83
  84 /*
  85  * Start addresses for the final memory configuration
  86  * (Set up by the startup code)
  87  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  88  */
  89 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  90 #define CONFIG_SYS_SDRAM_SIZE           32      /* SDRAM size in MB */
  91 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
  92 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
  93 #define CONFIG_SYS_SDRAM_CTRL           0xE1002000
  94 #define CONFIG_SYS_SDRAM_EMOD           0x80010000
  95 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
  96
  97 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_FLASH_BASE + 0x400)
  98 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
  99
 100 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 101
 102 /*
 103  * For booting Linux, the board info and command line data
 104  * have to be in the first 8 MB of memory, since this is
 105  * the maximum mapped by the Linux kernel during initialization ??
 106  */
 107 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 108 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 109
 110 /* FLASH organization */
 111 #ifdef CONFIG_SYS_FLASH_CFI
 112 #       define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
 113 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 114 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 115 #       define CONFIG_SYS_MAX_FLASH_SECT        254     /* max number of sectors on one chip */
 116 #endif
 117
 118 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 119
 120 /*
 121  * Configuration for environment
 122  * Environment is embedded in u-boot in the second sector of the flash
 123  */
 124
 125 #define LDS_BOARD_TEXT \
 126         . = DEFINED(env_offset) ? env_offset : .; \
 127         env/embedded.o(.text*);
 128
 129 /* Cache Configuration */
 130
 131 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 132                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 133 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 134                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 135 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 136 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 137                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 138                                          CF_ACR_EN | CF_ACR_SM_ALL)
 139 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 140                                          CF_CACR_DISD | CF_CACR_INVI | \
 141                                          CF_CACR_CEIB | CF_CACR_DCM | \
 142                                          CF_CACR_EUSP)
 143
 144 /* Chipselect bank definitions */
 145 /*
 146  * CS0 - NOR Flash
 147  * CS1 - Available
 148  * CS2 - Available
 149  * CS3 - Available
 150  * CS4 - Available
 151  * CS5 - Available
 152  */
 153 #define CONFIG_SYS_CS0_BASE             0
 154 #define CONFIG_SYS_CS0_MASK             0x007F0001
 155 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 156
 157 #endif                          /* _M5208EVBE_H */