Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm
[platform/kernel/u-boot.git] / include / configs / M5208EVBE.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Configuation settings for the Freescale MCF5208EVBe.
4  *
5  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
6  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
7  */
8
9 #ifndef _M5208EVBE_H
10 #define _M5208EVBE_H
11
12 /*
13  * High Level Configuration Options
14  * (easy to change)
15  */
16 #define CONFIG_MCFUART
17 #define CONFIG_SYS_UART_PORT            (0)
18
19 #undef CONFIG_WATCHDOG
20 #define CONFIG_WATCHDOG_TIMEOUT         5000
21
22 #ifdef CONFIG_MCFFEC
23 #       define CONFIG_MII_INIT          1
24 #       define CONFIG_SYS_DISCOVER_PHY
25 #       define CONFIG_SYS_RX_ETH_BUFFER 8
26 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
27 #       define CONFIG_HAS_ETH1
28 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
29 #       ifndef CONFIG_SYS_DISCOVER_PHY
30 #               define FECDUPLEX        FULL
31 #               define FECSPEED         _100BASET
32 #       else
33 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
34 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
35 #               endif
36 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
37 #endif
38
39 /* Timer */
40 #define CONFIG_MCFTMR
41
42 /* I2C */
43 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
44
45 #define CONFIG_UDP_CHECKSUM
46
47 #ifdef CONFIG_MCFFEC
48 #       define CONFIG_IPADDR    192.162.1.2
49 #       define CONFIG_NETMASK   255.255.255.0
50 #       define CONFIG_SERVERIP  192.162.1.1
51 #       define CONFIG_GATEWAYIP 192.162.1.1
52 #endif                          /* CONFIG_MCFFEC */
53
54 #define CONFIG_HOSTNAME         "M5208EVBe"
55 #define CONFIG_EXTRA_ENV_SETTINGS               \
56         "netdev=eth0\0"                         \
57         "loadaddr=40010000\0"                   \
58         "u-boot=u-boot.bin\0"                   \
59         "load=tftp ${loadaddr) ${u-boot}\0"     \
60         "upd=run load; run prog\0"              \
61         "prog=prot off 0 3ffff;"                \
62         "era 0 3ffff;"                          \
63         "cp.b ${loadaddr} 0 ${filesize};"       \
64         "save\0"                                \
65         ""
66
67 #define CONFIG_PRAM             512     /* 512 KB */
68
69 #define CONFIG_SYS_CLK          166666666       /* CPU Core Clock */
70 #define CONFIG_SYS_PLL_ODR      0x36
71 #define CONFIG_SYS_PLL_FDR      0x7D
72
73 #define CONFIG_SYS_MBAR         0xFC000000
74
75 /*
76  * Low Level Configuration Settings
77  * (address mappings, register initial values, etc.)
78  * You should know what you are doing if you make changes here.
79  */
80 /* Definitions for initial stack pointer and data area (in DPRAM) */
81 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
82 #define CONFIG_SYS_INIT_RAM_SIZE                0x4000  /* Size of used area in internal SRAM */
83 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
84 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
85 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
86
87 /*
88  * Start addresses for the final memory configuration
89  * (Set up by the startup code)
90  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
91  */
92 #define CONFIG_SYS_SDRAM_BASE           0x40000000
93 #define CONFIG_SYS_SDRAM_SIZE           32      /* SDRAM size in MB */
94 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
95 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
96 #define CONFIG_SYS_SDRAM_CTRL           0xE1002000
97 #define CONFIG_SYS_SDRAM_EMOD           0x80010000
98 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
99
100 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_FLASH_BASE + 0x400)
101 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
102
103 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
104
105 /*
106  * For booting Linux, the board info and command line data
107  * have to be in the first 8 MB of memory, since this is
108  * the maximum mapped by the Linux kernel during initialization ??
109  */
110 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
111 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
112
113 /* FLASH organization */
114 #ifdef CONFIG_SYS_FLASH_CFI
115 #       define CONFIG_SYS_FLASH_SIZE            0x800000        /* Max size that the board might have */
116 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
117 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
118 #       define CONFIG_SYS_MAX_FLASH_SECT        254     /* max number of sectors on one chip */
119 #endif
120
121 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
122
123 /*
124  * Configuration for environment
125  * Environment is embedded in u-boot in the second sector of the flash
126  */
127
128 #define LDS_BOARD_TEXT \
129         . = DEFINED(env_offset) ? env_offset : .; \
130         env/embedded.o(.text*);
131
132 /* Cache Configuration */
133
134 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
135                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
136 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
137                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
138 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
139 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
140                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
141                                          CF_ACR_EN | CF_ACR_SM_ALL)
142 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
143                                          CF_CACR_DISD | CF_CACR_INVI | \
144                                          CF_CACR_CEIB | CF_CACR_DCM | \
145                                          CF_CACR_EUSP)
146
147 /* Chipselect bank definitions */
148 /*
149  * CS0 - NOR Flash
150  * CS1 - Available
151  * CS2 - Available
152  * CS3 - Available
153  * CS4 - Available
154  * CS5 - Available
155  */
156 #define CONFIG_SYS_CS0_BASE             0
157 #define CONFIG_SYS_CS0_MASK             0x007F0001
158 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
159
160 #endif                          /* _M5208EVBE_H */