include/configs/BSC9132QDS.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * BSC9132 QDS board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_MISC_INIT_R
  15
  16 #ifdef CONFIG_SDCARD
  17 #define CONFIG_RAMBOOT_SDCARD
  18 #define CONFIG_SYS_RAMBOOT
  19 #define CONFIG_SYS_EXTRA_ENV_RELOC
  20 #define CONFIG_SYS_TEXT_BASE            0x11000000
  21 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  22 #endif
  23 #ifdef CONFIG_SPIFLASH
  24 #define CONFIG_RAMBOOT_SPIFLASH
  25 #define CONFIG_SYS_RAMBOOT
  26 #define CONFIG_SYS_EXTRA_ENV_RELOC
  27 #define CONFIG_SYS_TEXT_BASE            0x11000000
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  29 #endif
  30 #ifdef CONFIG_NAND_SECBOOT
  31 #define CONFIG_RAMBOOT_NAND
  32 #define CONFIG_SYS_RAMBOOT
  33 #define CONFIG_SYS_EXTRA_ENV_RELOC
  34 #define CONFIG_SYS_TEXT_BASE            0x11000000
  35 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  36 #endif
  37
  38 #ifdef CONFIG_NAND
  39 #define CONFIG_SPL_INIT_MINIMAL
  40 #define CONFIG_SPL_NAND_BOOT
  41 #define CONFIG_SPL_FLUSH_IMAGE
  42 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  43
  44 #define CONFIG_SYS_TEXT_BASE            0x00201000
  45 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  46 #define CONFIG_SPL_MAX_SIZE             8192
  47 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  48 #define CONFIG_SPL_RELOC_STACK          0x00100000
  49 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  50 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  51 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  52 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  53 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  54 #endif
  55
  56 #ifndef CONFIG_SYS_TEXT_BASE
  57 #define CONFIG_SYS_TEXT_BASE            0x8ff40000
  58 #endif
  59
  60 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  61 #define CONFIG_RESET_VECTOR_ADDRESS     0x8ffffffc
  62 #endif
  63
  64 #ifdef CONFIG_SPL_BUILD
  65 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  66 #else
  67 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  68 #endif
  69
  70 /* High Level Configuration Options */
  71 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  72
  73 #if defined(CONFIG_PCI)
  74 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
  75 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  76 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  77 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  78 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  79
  80 /*
  81  * PCI Windows
  82  * Memory space is mapped 1-1, but I/O space must start from 0.
  83  */
  84 /* controller 1, Slot 1, tgtid 1, Base address a000 */
  85 #define CONFIG_SYS_PCIE1_NAME           "PCIe Slot"
  86 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
  87 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
  88 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
  89 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
  90 #define CONFIG_SYS_PCIE1_IO_VIRT        0xC0010000
  91 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
  92 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
  93 #define CONFIG_SYS_PCIE1_IO_PHYS        0xC0010000
  94
  95 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
  96 #endif
  97
  98 #define CONFIG_ENV_OVERWRITE
  99 #define CONFIG_TSEC_ENET /* ethernet */
 100
 101 #if defined(CONFIG_SYS_CLK_100_DDR_100)
 102 #define CONFIG_SYS_CLK_FREQ     100000000
 103 #define CONFIG_DDR_CLK_FREQ     100000000
 104 #elif defined(CONFIG_SYS_CLK_100_DDR_133)
 105 #define CONFIG_SYS_CLK_FREQ     100000000
 106 #define CONFIG_DDR_CLK_FREQ     133000000
 107 #endif
 108
 109 #define CONFIG_MP
 110
 111 #define CONFIG_HWCONFIG
 112 /*
 113  * These can be toggled for performance analysis, otherwise use default.
 114  */
 115 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 116 #define CONFIG_BTB                      /* enable branch predition */
 117
 118 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
 119 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
 120
 121 /* DDR Setup */
 122 #define CONFIG_SYS_SPD_BUS_NUM          0
 123 #define SPD_EEPROM_ADDRESS1             0x54 /* I2C access */
 124 #define SPD_EEPROM_ADDRESS2             0x56 /* I2C access */
 125 #define CONFIG_FSL_DDR_INTERACTIVE
 126
 127 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 128
 129 #define CONFIG_SYS_SDRAM_SIZE           (1024)
 130 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 131 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 132
 133 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 134
 135 /* DDR3 Controller Settings */
 136 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 137 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 138 #define CONFIG_SYS_DDR_CS0_CONFIG_1333  0x80004302
 139 #define CONFIG_SYS_DDR_CS0_CONFIG_800   0x80014302
 140 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 141 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 142 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 143 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 144 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 145 #define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
 146
 147 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 148 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 149 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 150 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 151 #define CONFIG_SYS_DDR_CONTROL_800              0x470C0000
 152 #define CONFIG_SYS_DDR_CONTROL_2_800    0x04401050
 153 #define CONFIG_SYS_DDR_TIMING_4_800             0x00220001
 154 #define CONFIG_SYS_DDR_TIMING_5_800             0x03402400
 155
 156 #define CONFIG_SYS_DDR_CONTROL_1333             0x470C0008
 157 #define CONFIG_SYS_DDR_CONTROL_2_1333   0x24401010
 158 #define CONFIG_SYS_DDR_TIMING_4_1333            0x00000001
 159 #define CONFIG_SYS_DDR_TIMING_5_1333            0x03401400
 160
 161 #define CONFIG_SYS_DDR_TIMING_3_800             0x00020000
 162 #define CONFIG_SYS_DDR_TIMING_0_800             0x00330004
 163 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6B4846
 164 #define CONFIG_SYS_DDR_TIMING_2_800             0x0FA8C8CF
 165 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 166 #define CONFIG_SYS_DDR_MODE_1_800               0x40461520
 167 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 168 #define CONFIG_SYS_DDR_INTERVAL_800             0x0C300000
 169 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8655A608
 170
 171 #define CONFIG_SYS_DDR_TIMING_3_1333            0x01061000
 172 #define CONFIG_SYS_DDR_TIMING_0_1333            0x00440104
 173 #define CONFIG_SYS_DDR_TIMING_1_1333            0x98913A45
 174 #define CONFIG_SYS_DDR_TIMING_2_1333            0x0FB8B114
 175 #define CONFIG_SYS_DDR_CLK_CTRL_1333            0x02800000
 176 #define CONFIG_SYS_DDR_MODE_1_1333              0x00061A50
 177 #define CONFIG_SYS_DDR_MODE_2_1333              0x00100000
 178 #define CONFIG_SYS_DDR_INTERVAL_1333            0x144E0513
 179 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333       0x8655F607
 180
 181 /*FIXME: the following params are constant w.r.t diff freq
 182 combinations. this should be removed later
 183 */
 184 #if CONFIG_DDR_CLK_FREQ == 100000000
 185 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 186 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 187 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
 188 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 189 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 190 #elif CONFIG_DDR_CLK_FREQ == 133000000
 191 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
 192 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_1333
 193 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_1333
 194 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333
 195 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333
 196 #else
 197 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 198 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 199 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_800
 200 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 201 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 202 #endif
 203
 204 /* relocated CCSRBAR */
 205 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 206 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 207
 208 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR
 209
 210 /* DSP CCSRBAR */
 211 #define CONFIG_SYS_FSL_DSP_CCSRBAR      CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 212 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 213
 214 /*
 215  * IFC Definitions
 216  */
 217 /* NOR Flash on IFC */
 218
 219 #define CONFIG_SYS_FLASH_BASE           0x88000000
 220 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* Max number of sector: 32M */
 221
 222 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 223
 224 #define CONFIG_SYS_NOR_CSPR     0x88000101
 225 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 226 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(5)
 227 /* NOR Flash Timing Params */
 228
 229 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) \
 230                                 | FTIM0_NOR_TEADC(0x03) \
 231                                 | FTIM0_NOR_TAVDS(0x00) \
 232                                 | FTIM0_NOR_TEAHC(0x0f))
 233 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1d) \
 234                                 | FTIM1_NOR_TRAD_NOR(0x09) \
 235                                 | FTIM1_NOR_TSEQRAD_NOR(0x09))
 236 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x1) \
 237                                 | FTIM2_NOR_TCH(0x4) \
 238                                 | FTIM2_NOR_TWPH(0x7) \
 239                                 | FTIM2_NOR_TWP(0x1e))
 240 #define CONFIG_SYS_NOR_FTIM3    0x0
 241
 242 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 243 #define CONFIG_SYS_FLASH_QUIET_TEST
 244 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 245 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 246
 247 #undef CONFIG_SYS_FLASH_CHECKSUM
 248 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 249 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 250
 251 /* CFI for NOR Flash */
 252 #define CONFIG_FLASH_CFI_DRIVER
 253 #define CONFIG_SYS_FLASH_CFI
 254 #define CONFIG_SYS_FLASH_EMPTY_INFO
 255 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 256
 257 /* NAND Flash on IFC */
 258 #define CONFIG_SYS_NAND_BASE            0xff800000
 259 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 260
 261 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 262                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 263                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 264                                 | CSPR_V)
 265 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 266
 267 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 268                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 269                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 270                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 271                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 272                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 273                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 274
 275 /* NAND Flash Timing Params */
 276 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03) \
 277                                         | FTIM0_NAND_TWP(0x05) \
 278                                         | FTIM0_NAND_TWCHT(0x02) \
 279                                         | FTIM0_NAND_TWH(0x04))
 280 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1c) \
 281                                         | FTIM1_NAND_TWBE(0x1e) \
 282                                         | FTIM1_NAND_TRR(0x07) \
 283                                         | FTIM1_NAND_TRP(0x05))
 284 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08) \
 285                                         | FTIM2_NAND_TREH(0x04) \
 286                                         | FTIM2_NAND_TWHRE(0x11))
 287 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 288
 289 #define CONFIG_SYS_NAND_DDR_LAW         11
 290
 291 /* NAND */
 292 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 293 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 294
 295 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 296
 297 #ifndef CONFIG_SPL_BUILD
 298 #define CONFIG_FSL_QIXIS
 299 #endif
 300 #ifdef CONFIG_FSL_QIXIS
 301 #define CONFIG_SYS_FPGA_BASE    0xffb00000
 302 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 303 #define QIXIS_BASE      CONFIG_SYS_FPGA_BASE
 304 #define QIXIS_LBMAP_SWITCH      9
 305 #define QIXIS_LBMAP_MASK        0x07
 306 #define QIXIS_LBMAP_SHIFT       0
 307 #define QIXIS_LBMAP_DFLTBANK            0x00
 308 #define QIXIS_LBMAP_ALTBANK             0x04
 309 #define QIXIS_RST_CTL_RESET             0x83
 310 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 311 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 312 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 313
 314 #define CONFIG_SYS_FPGA_BASE_PHYS       CONFIG_SYS_FPGA_BASE
 315
 316 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
 317                                         | CSPR_PORT_SIZE_8 \
 318                                         | CSPR_MSEL_GPCM \
 319                                         | CSPR_V)
 320 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 321 #define CONFIG_SYS_CSOR2                0x0
 322 /* CPLD Timing parameters for IFC CS3 */
 323 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 324                                         FTIM0_GPCM_TEADC(0x0e) | \
 325                                         FTIM0_GPCM_TEAHC(0x0e))
 326 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 327                                         FTIM1_GPCM_TRAD(0x1f))
 328 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 329                                         FTIM2_GPCM_TCH(0x8) | \
 330                                         FTIM2_GPCM_TWP(0x1f))
 331 #define CONFIG_SYS_CS2_FTIM3            0x0
 332 #endif
 333
 334 /* Set up IFC registers for boot location NOR/NAND */
 335 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 336 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 337 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 338 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 339 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 340 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 341 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 342 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 343 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 344 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 345 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 346 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 347 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 348 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 349 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 350 #else
 351 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 352 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 353 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 354 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 355 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 356 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 357 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 358 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 359 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 360 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 361 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 362 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 363 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 364 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 365 #endif
 366
 367 #define CONFIG_BOARD_EARLY_INIT_R
 368
 369 #define CONFIG_SYS_INIT_RAM_LOCK
 370 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 371 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 372
 373 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 374                                                 - GENERATED_GBL_DATA_SIZE)
 375 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 376
 377 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 378 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 379
 380 /* Serial Port */
 381 #define CONFIG_CONS_INDEX       1
 382 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 383 #define CONFIG_SYS_NS16550_SERIAL
 384 #define CONFIG_SYS_NS16550_REG_SIZE     1
 385 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 386 #ifdef CONFIG_SPL_BUILD
 387 #define CONFIG_NS16550_MIN_FUNCTIONS
 388 #endif
 389
 390 #define CONFIG_SYS_BAUDRATE_TABLE       \
 391         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 392
 393 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 394 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 395 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700)
 396 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800)
 397
 398 #define CONFIG_SYS_I2C
 399 #define CONFIG_SYS_I2C_FSL
 400 #define CONFIG_SYS_FSL_I2C_SPEED        400800 /* I2C speed and slave address*/
 401 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 402 #define CONFIG_SYS_FSL_I2C2_SPEED       400800 /* I2C speed and slave address*/
 403 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 404 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 405 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 406
 407 /* I2C EEPROM */
 408 #define CONFIG_ID_EEPROM
 409 #ifdef CONFIG_ID_EEPROM
 410 #define CONFIG_SYS_I2C_EEPROM_NXID
 411 #endif
 412 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 413 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 414 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 415
 416 /* enable read and write access to EEPROM */
 417 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 418 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 419 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 420
 421 /* I2C FPGA */
 422 #define CONFIG_I2C_FPGA
 423 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 424
 425 #define CONFIG_RTC_DS3231
 426 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 427
 428 /*
 429  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 430  * used for SLIC
 431  */
 432 /* eSPI - Enhanced SPI */
 433 #ifdef CONFIG_FSL_ESPI
 434 #define CONFIG_SF_DEFAULT_SPEED         10000000
 435 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 436 #endif
 437
 438 #if defined(CONFIG_TSEC_ENET)
 439
 440 #define CONFIG_MII                      /* MII PHY management */
 441 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 442 #define CONFIG_TSEC1    1
 443 #define CONFIG_TSEC1_NAME       "eTSEC1"
 444 #define CONFIG_TSEC2    1
 445 #define CONFIG_TSEC2_NAME       "eTSEC2"
 446
 447 #define TSEC1_PHY_ADDR          0
 448 #define TSEC2_PHY_ADDR          1
 449
 450 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 451 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 452
 453 #define TSEC1_PHYIDX            0
 454 #define TSEC2_PHYIDX            0
 455
 456 #define CONFIG_ETHPRIME         "eTSEC1"
 457
 458 /* TBI PHY configuration for SGMII mode */
 459 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 460                 TBICR_PHY_RESET \
 461                 | TBICR_ANEG_ENABLE \
 462                 | TBICR_FULL_DUPLEX \
 463                 | TBICR_SPEED1_SET \
 464                 )
 465
 466 #endif  /* CONFIG_TSEC_ENET */
 467
 468 #ifdef CONFIG_MMC
 469 #define CONFIG_FSL_ESDHC
 470 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 471 #endif
 472
 473 #ifdef CONFIG_USB_EHCI_HCD
 474 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 475 #define CONFIG_USB_EHCI_FSL
 476 #define CONFIG_HAS_FSL_DR_USB
 477 #endif
 478
 479 /*
 480  * Environment
 481  */
 482 #if defined(CONFIG_RAMBOOT_SDCARD)
 483 #define CONFIG_FSL_FIXED_MMC_LOCATION
 484 #define CONFIG_SYS_MMC_ENV_DEV          0
 485 #define CONFIG_ENV_SIZE                 0x2000
 486 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 487 #define CONFIG_ENV_SPI_BUS      0
 488 #define CONFIG_ENV_SPI_CS       0
 489 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 490 #define CONFIG_ENV_SPI_MODE     0
 491 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 492 #define CONFIG_ENV_SECT_SIZE    0x10000
 493 #define CONFIG_ENV_SIZE         0x2000
 494 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 495 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 496 #define CONFIG_ENV_OFFSET       ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 497 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 498 #elif defined(CONFIG_SYS_RAMBOOT)
 499 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 500 #define CONFIG_ENV_SIZE                 0x2000
 501 #else
 502 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 503 #define CONFIG_ENV_SIZE         0x2000
 504 #define CONFIG_ENV_SECT_SIZE    0x20000
 505 #endif
 506
 507 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 508 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 509
 510 /*
 511  * Miscellaneous configurable options
 512  */
 513 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 514 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 515 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 516 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 517
 518 #if defined(CONFIG_CMD_KGDB)
 519 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 520 #else
 521 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 522 #endif
 523 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 524                                                 /* Print Buffer Size */
 525 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 526 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 527
 528 /*
 529  * For booting Linux, the board info and command line data
 530  * have to be in the first 64 MB of memory, since this is
 531  * the maximum mapped by the Linux kernel during initialization.
 532  */
 533 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 534 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 535
 536 #if defined(CONFIG_CMD_KGDB)
 537 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 538 #endif
 539
 540 /*
 541  * Dynamic MTD Partition support with mtdparts
 542  */
 543 #ifdef CONFIG_MTD_NOR_FLASH
 544 #define CONFIG_MTD_DEVICE
 545 #define CONFIG_MTD_PARTITIONS
 546 #define CONFIG_FLASH_CFI_MTD
 547 #define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash,"
 548 #define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
 549                         "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
 550                         "8m(kernel),512k(dtb),-(fs)"
 551 #endif
 552 /*
 553  * Environment Configuration
 554  */
 555
 556 #if defined(CONFIG_TSEC_ENET)
 557 #define CONFIG_HAS_ETH0
 558 #define CONFIG_HAS_ETH1
 559 #endif
 560
 561 #define CONFIG_HOSTNAME         BSC9132qds
 562 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 563 #define CONFIG_BOOTFILE         "uImage"
 564 #define CONFIG_UBOOTPATH        "u-boot.bin"
 565
 566 #ifdef CONFIG_SDCARD
 567 #define CONFIG_DEF_HWCONFIG     "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 568 #else
 569 #define CONFIG_DEF_HWCONFIG     "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
 570 #endif
 571
 572 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 573         "netdev=eth0\0"                                         \
 574         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 575         "loadaddr=1000000\0"                    \
 576         "bootfile=uImage\0"     \
 577         "consoledev=ttyS0\0"                            \
 578         "ramdiskaddr=2000000\0"                 \
 579         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 580         "fdtaddr=1e00000\0"                             \
 581         "fdtfile=bsc9132qds.dtb\0"              \
 582         "bdev=sda1\0"   \
 583         CONFIG_DEF_HWCONFIG\
 584         "othbootargs=mem=880M ramdisk_size=600000 " \
 585                 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
 586                 "isolcpus=0\0" \
 587         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 588                 "console=$consoledev,$baudrate $othbootargs; "  \
 589                 "usb start;"                    \
 590                 "ext2load usb 0:4 $loadaddr $bootfile;"         \
 591                 "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 592                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 593                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 594         "debug_halt_off=mw ff7e0e30 0xf0000000;"
 595
 596 #define CONFIG_NFSBOOTCOMMAND   \
 597         "setenv bootargs root=/dev/nfs rw "     \
 598         "nfsroot=$serverip:$rootpath "  \
 599         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 600         "console=$consoledev,$baudrate $othbootargs;" \
 601         "tftp $loadaddr $bootfile;"     \
 602         "tftp $fdtaddr $fdtfile;"       \
 603         "bootm $loadaddr - $fdtaddr"
 604
 605 #define CONFIG_HDBOOT   \
 606         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 607         "console=$consoledev,$baudrate $othbootargs;" \
 608         "usb start;"    \
 609         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 610         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 611         "bootm $loadaddr - $fdtaddr"
 612
 613 #define CONFIG_RAMBOOTCOMMAND           \
 614         "setenv bootargs root=/dev/ram rw "     \
 615         "console=$consoledev,$baudrate $othbootargs; "  \
 616         "tftp $ramdiskaddr $ramdiskfile;"       \
 617         "tftp $loadaddr $bootfile;"             \
 618         "tftp $fdtaddr $fdtfile;"               \
 619         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 620
 621 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 622
 623 #include <asm/fsl_secure_boot.h>
 624
 625 #endif  /* __CONFIG_H */