include/configs/BSC9132QDS.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * BSC9132 QDS board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_MISC_INIT_R
  15
  16 #ifdef CONFIG_SDCARD
  17 #define CONFIG_RAMBOOT_SDCARD
  18 #define CONFIG_SYS_RAMBOOT
  19 #define CONFIG_SYS_EXTRA_ENV_RELOC
  20 #define CONFIG_SYS_TEXT_BASE            0x11000000
  21 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  22 #endif
  23 #ifdef CONFIG_SPIFLASH
  24 #define CONFIG_RAMBOOT_SPIFLASH
  25 #define CONFIG_SYS_RAMBOOT
  26 #define CONFIG_SYS_EXTRA_ENV_RELOC
  27 #define CONFIG_SYS_TEXT_BASE            0x11000000
  28 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  29 #endif
  30 #ifdef CONFIG_NAND_SECBOOT
  31 #define CONFIG_RAMBOOT_NAND
  32 #define CONFIG_SYS_RAMBOOT
  33 #define CONFIG_SYS_EXTRA_ENV_RELOC
  34 #define CONFIG_SYS_TEXT_BASE            0x11000000
  35 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  36 #endif
  37
  38 #ifdef CONFIG_NAND
  39 #define CONFIG_SPL_INIT_MINIMAL
  40 #define CONFIG_SPL_NAND_BOOT
  41 #define CONFIG_SPL_FLUSH_IMAGE
  42 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  43
  44 #define CONFIG_SYS_TEXT_BASE            0x00201000
  45 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  46 #define CONFIG_SPL_MAX_SIZE             8192
  47 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  48 #define CONFIG_SPL_RELOC_STACK          0x00100000
  49 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  50 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  51 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  52 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  53 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  54 #endif
  55
  56 #ifndef CONFIG_SYS_TEXT_BASE
  57 #define CONFIG_SYS_TEXT_BASE            0x8ff40000
  58 #endif
  59
  60 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  61 #define CONFIG_RESET_VECTOR_ADDRESS     0x8ffffffc
  62 #endif
  63
  64 #ifdef CONFIG_SPL_BUILD
  65 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  66 #else
  67 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  68 #endif
  69
  70 /* High Level Configuration Options */
  71 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  72
  73 #if defined(CONFIG_PCI)
  74 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
  75 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  76 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  77 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  78 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  79
  80 #define CONFIG_CMD_PCI
  81
  82 /*
  83  * PCI Windows
  84  * Memory space is mapped 1-1, but I/O space must start from 0.
  85  */
  86 /* controller 1, Slot 1, tgtid 1, Base address a000 */
  87 #define CONFIG_SYS_PCIE1_NAME           "PCIe Slot"
  88 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x90000000
  89 #define CONFIG_SYS_PCIE1_MEM_BUS        0x90000000
  90 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x90000000
  91 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
  92 #define CONFIG_SYS_PCIE1_IO_VIRT        0xC0010000
  93 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
  94 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
  95 #define CONFIG_SYS_PCIE1_IO_PHYS        0xC0010000
  96
  97 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
  98 #endif
  99
 100 #define CONFIG_ENV_OVERWRITE
 101 #define CONFIG_TSEC_ENET /* ethernet */
 102
 103 #if defined(CONFIG_SYS_CLK_100_DDR_100)
 104 #define CONFIG_SYS_CLK_FREQ     100000000
 105 #define CONFIG_DDR_CLK_FREQ     100000000
 106 #elif defined(CONFIG_SYS_CLK_100_DDR_133)
 107 #define CONFIG_SYS_CLK_FREQ     100000000
 108 #define CONFIG_DDR_CLK_FREQ     133000000
 109 #endif
 110
 111 #define CONFIG_MP
 112
 113 #define CONFIG_HWCONFIG
 114 /*
 115  * These can be toggled for performance analysis, otherwise use default.
 116  */
 117 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 118 #define CONFIG_BTB                      /* enable branch predition */
 119
 120 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
 121 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
 122
 123 /* DDR Setup */
 124 #define CONFIG_SYS_SPD_BUS_NUM          0
 125 #define SPD_EEPROM_ADDRESS1             0x54 /* I2C access */
 126 #define SPD_EEPROM_ADDRESS2             0x56 /* I2C access */
 127 #define CONFIG_FSL_DDR_INTERACTIVE
 128
 129 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 130
 131 #define CONFIG_SYS_SDRAM_SIZE           (1024)
 132 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 133 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 134
 135 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 136
 137 /* DDR3 Controller Settings */
 138 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 139 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 140 #define CONFIG_SYS_DDR_CS0_CONFIG_1333  0x80004302
 141 #define CONFIG_SYS_DDR_CS0_CONFIG_800   0x80014302
 142 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 143 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 144 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 145 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 146 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 147 #define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
 148
 149 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 150 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 151 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 152 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 153 #define CONFIG_SYS_DDR_CONTROL_800              0x470C0000
 154 #define CONFIG_SYS_DDR_CONTROL_2_800    0x04401050
 155 #define CONFIG_SYS_DDR_TIMING_4_800             0x00220001
 156 #define CONFIG_SYS_DDR_TIMING_5_800             0x03402400
 157
 158 #define CONFIG_SYS_DDR_CONTROL_1333             0x470C0008
 159 #define CONFIG_SYS_DDR_CONTROL_2_1333   0x24401010
 160 #define CONFIG_SYS_DDR_TIMING_4_1333            0x00000001
 161 #define CONFIG_SYS_DDR_TIMING_5_1333            0x03401400
 162
 163 #define CONFIG_SYS_DDR_TIMING_3_800             0x00020000
 164 #define CONFIG_SYS_DDR_TIMING_0_800             0x00330004
 165 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6B4846
 166 #define CONFIG_SYS_DDR_TIMING_2_800             0x0FA8C8CF
 167 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 168 #define CONFIG_SYS_DDR_MODE_1_800               0x40461520
 169 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 170 #define CONFIG_SYS_DDR_INTERVAL_800             0x0C300000
 171 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8655A608
 172
 173 #define CONFIG_SYS_DDR_TIMING_3_1333            0x01061000
 174 #define CONFIG_SYS_DDR_TIMING_0_1333            0x00440104
 175 #define CONFIG_SYS_DDR_TIMING_1_1333            0x98913A45
 176 #define CONFIG_SYS_DDR_TIMING_2_1333            0x0FB8B114
 177 #define CONFIG_SYS_DDR_CLK_CTRL_1333            0x02800000
 178 #define CONFIG_SYS_DDR_MODE_1_1333              0x00061A50
 179 #define CONFIG_SYS_DDR_MODE_2_1333              0x00100000
 180 #define CONFIG_SYS_DDR_INTERVAL_1333            0x144E0513
 181 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333       0x8655F607
 182
 183 /*FIXME: the following params are constant w.r.t diff freq
 184 combinations. this should be removed later
 185 */
 186 #if CONFIG_DDR_CLK_FREQ == 100000000
 187 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 188 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 189 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
 190 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 191 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 192 #elif CONFIG_DDR_CLK_FREQ == 133000000
 193 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
 194 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_1333
 195 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_1333
 196 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333
 197 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333
 198 #else
 199 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
 200 #define CONFIG_SYS_DDR_CONTROL          CONFIG_SYS_DDR_CONTROL_800
 201 #define CONFIG_SYS_DDR_CONTROL_2        CONFIG_SYS_DDR_CONTROL_2_800
 202 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800
 203 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800
 204 #endif
 205
 206 /* relocated CCSRBAR */
 207 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 208 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 209
 210 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR
 211
 212 /* DSP CCSRBAR */
 213 #define CONFIG_SYS_FSL_DSP_CCSRBAR      CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 214 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 215
 216 /*
 217  * IFC Definitions
 218  */
 219 /* NOR Flash on IFC */
 220
 221 #define CONFIG_SYS_FLASH_BASE           0x88000000
 222 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* Max number of sector: 32M */
 223
 224 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 225
 226 #define CONFIG_SYS_NOR_CSPR     0x88000101
 227 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 228 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(5)
 229 /* NOR Flash Timing Params */
 230
 231 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) \
 232                                 | FTIM0_NOR_TEADC(0x03) \
 233                                 | FTIM0_NOR_TAVDS(0x00) \
 234                                 | FTIM0_NOR_TEAHC(0x0f))
 235 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1d) \
 236                                 | FTIM1_NOR_TRAD_NOR(0x09) \
 237                                 | FTIM1_NOR_TSEQRAD_NOR(0x09))
 238 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x1) \
 239                                 | FTIM2_NOR_TCH(0x4) \
 240                                 | FTIM2_NOR_TWPH(0x7) \
 241                                 | FTIM2_NOR_TWP(0x1e))
 242 #define CONFIG_SYS_NOR_FTIM3    0x0
 243
 244 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 245 #define CONFIG_SYS_FLASH_QUIET_TEST
 246 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 247 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 248
 249 #undef CONFIG_SYS_FLASH_CHECKSUM
 250 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 251 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 252
 253 /* CFI for NOR Flash */
 254 #define CONFIG_FLASH_CFI_DRIVER
 255 #define CONFIG_SYS_FLASH_CFI
 256 #define CONFIG_SYS_FLASH_EMPTY_INFO
 257 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 258
 259 /* NAND Flash on IFC */
 260 #define CONFIG_SYS_NAND_BASE            0xff800000
 261 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 262
 263 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 264                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 265                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 266                                 | CSPR_V)
 267 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 268
 269 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 270                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 271                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 272                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 273                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 274                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 275                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 276
 277 /* NAND Flash Timing Params */
 278 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03) \
 279                                         | FTIM0_NAND_TWP(0x05) \
 280                                         | FTIM0_NAND_TWCHT(0x02) \
 281                                         | FTIM0_NAND_TWH(0x04))
 282 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1c) \
 283                                         | FTIM1_NAND_TWBE(0x1e) \
 284                                         | FTIM1_NAND_TRR(0x07) \
 285                                         | FTIM1_NAND_TRP(0x05))
 286 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08) \
 287                                         | FTIM2_NAND_TREH(0x04) \
 288                                         | FTIM2_NAND_TWHRE(0x11))
 289 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 290
 291 #define CONFIG_SYS_NAND_DDR_LAW         11
 292
 293 /* NAND */
 294 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 295 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 296 #define CONFIG_CMD_NAND
 297
 298 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 299
 300 #ifndef CONFIG_SPL_BUILD
 301 #define CONFIG_FSL_QIXIS
 302 #endif
 303 #ifdef CONFIG_FSL_QIXIS
 304 #define CONFIG_SYS_FPGA_BASE    0xffb00000
 305 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 306 #define QIXIS_BASE      CONFIG_SYS_FPGA_BASE
 307 #define QIXIS_LBMAP_SWITCH      9
 308 #define QIXIS_LBMAP_MASK        0x07
 309 #define QIXIS_LBMAP_SHIFT       0
 310 #define QIXIS_LBMAP_DFLTBANK            0x00
 311 #define QIXIS_LBMAP_ALTBANK             0x04
 312 #define QIXIS_RST_CTL_RESET             0x83
 313 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 314 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 315 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 316
 317 #define CONFIG_SYS_FPGA_BASE_PHYS       CONFIG_SYS_FPGA_BASE
 318
 319 #define CONFIG_SYS_CSPR2                (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
 320                                         | CSPR_PORT_SIZE_8 \
 321                                         | CSPR_MSEL_GPCM \
 322                                         | CSPR_V)
 323 #define CONFIG_SYS_AMASK2               IFC_AMASK(64*1024)
 324 #define CONFIG_SYS_CSOR2                0x0
 325 /* CPLD Timing parameters for IFC CS3 */
 326 #define CONFIG_SYS_CS2_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 327                                         FTIM0_GPCM_TEADC(0x0e) | \
 328                                         FTIM0_GPCM_TEAHC(0x0e))
 329 #define CONFIG_SYS_CS2_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 330                                         FTIM1_GPCM_TRAD(0x1f))
 331 #define CONFIG_SYS_CS2_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 332                                         FTIM2_GPCM_TCH(0x8) | \
 333                                         FTIM2_GPCM_TWP(0x1f))
 334 #define CONFIG_SYS_CS2_FTIM3            0x0
 335 #endif
 336
 337 /* Set up IFC registers for boot location NOR/NAND */
 338 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 339 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 340 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 341 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 342 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 343 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 344 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 345 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 346 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 347 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 348 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 349 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 350 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 351 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 352 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 353 #else
 354 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 355 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 356 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 357 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 358 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 359 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 360 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 361 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 362 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 363 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 364 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 365 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 366 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 367 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 368 #endif
 369
 370 #define CONFIG_BOARD_EARLY_INIT_R
 371
 372 #define CONFIG_SYS_INIT_RAM_LOCK
 373 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 374 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000 /* End of used area in RAM */
 375
 376 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 377                                                 - GENERATED_GBL_DATA_SIZE)
 378 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 379
 380 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 381 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 382
 383 /* Serial Port */
 384 #define CONFIG_CONS_INDEX       1
 385 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 386 #define CONFIG_SYS_NS16550_SERIAL
 387 #define CONFIG_SYS_NS16550_REG_SIZE     1
 388 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 389 #ifdef CONFIG_SPL_BUILD
 390 #define CONFIG_NS16550_MIN_FUNCTIONS
 391 #endif
 392
 393 #define CONFIG_SYS_BAUDRATE_TABLE       \
 394         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 395
 396 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
 397 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
 398 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700)
 399 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800)
 400
 401 #define CONFIG_SYS_I2C
 402 #define CONFIG_SYS_I2C_FSL
 403 #define CONFIG_SYS_FSL_I2C_SPEED        400800 /* I2C speed and slave address*/
 404 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 405 #define CONFIG_SYS_FSL_I2C2_SPEED       400800 /* I2C speed and slave address*/
 406 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 407 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 408 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 409
 410 /* I2C EEPROM */
 411 #define CONFIG_ID_EEPROM
 412 #ifdef CONFIG_ID_EEPROM
 413 #define CONFIG_SYS_I2C_EEPROM_NXID
 414 #endif
 415 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 416 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 417 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 418
 419 /* enable read and write access to EEPROM */
 420 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 421 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 422 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 423
 424 /* I2C FPGA */
 425 #define CONFIG_I2C_FPGA
 426 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 427
 428 #define CONFIG_RTC_DS3231
 429 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 430
 431 /*
 432  * SPI interface will not be available in case of NAND boot SPI CS0 will be
 433  * used for SLIC
 434  */
 435 /* eSPI - Enhanced SPI */
 436 #ifdef CONFIG_FSL_ESPI
 437 #define CONFIG_SF_DEFAULT_SPEED         10000000
 438 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 439 #endif
 440
 441 #if defined(CONFIG_TSEC_ENET)
 442
 443 #define CONFIG_MII                      /* MII PHY management */
 444 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 445 #define CONFIG_TSEC1    1
 446 #define CONFIG_TSEC1_NAME       "eTSEC1"
 447 #define CONFIG_TSEC2    1
 448 #define CONFIG_TSEC2_NAME       "eTSEC2"
 449
 450 #define TSEC1_PHY_ADDR          0
 451 #define TSEC2_PHY_ADDR          1
 452
 453 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 454 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 455
 456 #define TSEC1_PHYIDX            0
 457 #define TSEC2_PHYIDX            0
 458
 459 #define CONFIG_ETHPRIME         "eTSEC1"
 460
 461 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 462
 463 /* TBI PHY configuration for SGMII mode */
 464 #define CONFIG_TSEC_TBICR_SETTINGS ( \
 465                 TBICR_PHY_RESET \
 466                 | TBICR_ANEG_ENABLE \
 467                 | TBICR_FULL_DUPLEX \
 468                 | TBICR_SPEED1_SET \
 469                 )
 470
 471 #endif  /* CONFIG_TSEC_ENET */
 472
 473 #ifdef CONFIG_MMC
 474 #define CONFIG_FSL_ESDHC
 475 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 476 #endif
 477
 478 #ifdef CONFIG_USB_EHCI_HCD
 479 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 480 #define CONFIG_USB_EHCI_FSL
 481 #define CONFIG_HAS_FSL_DR_USB
 482 #endif
 483
 484 /*
 485  * Environment
 486  */
 487 #if defined(CONFIG_RAMBOOT_SDCARD)
 488 #define CONFIG_ENV_IS_IN_MMC
 489 #define CONFIG_FSL_FIXED_MMC_LOCATION
 490 #define CONFIG_SYS_MMC_ENV_DEV          0
 491 #define CONFIG_ENV_SIZE                 0x2000
 492 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 493 #define CONFIG_ENV_IS_IN_SPI_FLASH
 494 #define CONFIG_ENV_SPI_BUS      0
 495 #define CONFIG_ENV_SPI_CS       0
 496 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 497 #define CONFIG_ENV_SPI_MODE     0
 498 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 499 #define CONFIG_ENV_SECT_SIZE    0x10000
 500 #define CONFIG_ENV_SIZE         0x2000
 501 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
 502 #define CONFIG_ENV_IS_IN_NAND
 503 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 504 #define CONFIG_ENV_OFFSET       ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 505 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 506 #elif defined(CONFIG_SYS_RAMBOOT)
 507 #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
 508 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_MONITOR_BASE - 0x1000)
 509 #define CONFIG_ENV_SIZE                 0x2000
 510 #else
 511 #define CONFIG_ENV_IS_IN_FLASH
 512 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 513 #define CONFIG_ENV_SIZE         0x2000
 514 #define CONFIG_ENV_SECT_SIZE    0x20000
 515 #endif
 516
 517 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 518 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 519
 520 /*
 521  * Command line configuration.
 522  */
 523 #define CONFIG_CMD_REGINFO
 524
 525 /*
 526  * Miscellaneous configurable options
 527  */
 528 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 529 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 530 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 531 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 532
 533 #if defined(CONFIG_CMD_KGDB)
 534 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 535 #else
 536 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 537 #endif
 538 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 539                                                 /* Print Buffer Size */
 540 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 541 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 542
 543 /*
 544  * For booting Linux, the board info and command line data
 545  * have to be in the first 64 MB of memory, since this is
 546  * the maximum mapped by the Linux kernel during initialization.
 547  */
 548 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 549 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 550
 551 #if defined(CONFIG_CMD_KGDB)
 552 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 553 #endif
 554
 555 /*
 556  * Dynamic MTD Partition support with mtdparts
 557  */
 558 #ifdef CONFIG_MTD_NOR_FLASH
 559 #define CONFIG_MTD_DEVICE
 560 #define CONFIG_MTD_PARTITIONS
 561 #define CONFIG_FLASH_CFI_MTD
 562 #define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash,"
 563 #define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \
 564                         "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \
 565                         "8m(kernel),512k(dtb),-(fs)"
 566 #endif
 567 /*
 568  * Environment Configuration
 569  */
 570
 571 #if defined(CONFIG_TSEC_ENET)
 572 #define CONFIG_HAS_ETH0
 573 #define CONFIG_HAS_ETH1
 574 #endif
 575
 576 #define CONFIG_HOSTNAME         BSC9132qds
 577 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 578 #define CONFIG_BOOTFILE         "uImage"
 579 #define CONFIG_UBOOTPATH        "u-boot.bin"
 580
 581 #ifdef CONFIG_SDCARD
 582 #define CONFIG_DEF_HWCONFIG     "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 583 #else
 584 #define CONFIG_DEF_HWCONFIG     "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
 585 #endif
 586
 587 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 588         "netdev=eth0\0"                                         \
 589         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 590         "loadaddr=1000000\0"                    \
 591         "bootfile=uImage\0"     \
 592         "consoledev=ttyS0\0"                            \
 593         "ramdiskaddr=2000000\0"                 \
 594         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 595         "fdtaddr=1e00000\0"                             \
 596         "fdtfile=bsc9132qds.dtb\0"              \
 597         "bdev=sda1\0"   \
 598         CONFIG_DEF_HWCONFIG\
 599         "othbootargs=mem=880M ramdisk_size=600000 " \
 600                 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
 601                 "isolcpus=0\0" \
 602         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 603                 "console=$consoledev,$baudrate $othbootargs; "  \
 604                 "usb start;"                    \
 605                 "ext2load usb 0:4 $loadaddr $bootfile;"         \
 606                 "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 607                 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 608                 "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 609         "debug_halt_off=mw ff7e0e30 0xf0000000;"
 610
 611 #define CONFIG_NFSBOOTCOMMAND   \
 612         "setenv bootargs root=/dev/nfs rw "     \
 613         "nfsroot=$serverip:$rootpath "  \
 614         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 615         "console=$consoledev,$baudrate $othbootargs;" \
 616         "tftp $loadaddr $bootfile;"     \
 617         "tftp $fdtaddr $fdtfile;"       \
 618         "bootm $loadaddr - $fdtaddr"
 619
 620 #define CONFIG_HDBOOT   \
 621         "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 622         "console=$consoledev,$baudrate $othbootargs;" \
 623         "usb start;"    \
 624         "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 625         "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 626         "bootm $loadaddr - $fdtaddr"
 627
 628 #define CONFIG_RAMBOOTCOMMAND           \
 629         "setenv bootargs root=/dev/ram rw "     \
 630         "console=$consoledev,$baudrate $othbootargs; "  \
 631         "tftp $ramdiskaddr $ramdiskfile;"       \
 632         "tftp $loadaddr $bootfile;"             \
 633         "tftp $fdtaddr $fdtfile;"               \
 634         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 635
 636 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 637
 638 #include <asm/fsl_secure_boot.h>
 639
 640 #endif  /* __CONFIG_H */