include/configs/BSC9131RDB.h

   1 /*
   2  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * BSC9131 RDB board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #define CONFIG_NAND_FSL_IFC
  15
  16 #ifdef CONFIG_SPIFLASH
  17 #define CONFIG_RAMBOOT_SPIFLASH
  18 #define CONFIG_SYS_RAMBOOT
  19 #define CONFIG_SYS_EXTRA_ENV_RELOC
  20 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  21 #endif
  22
  23 #ifdef CONFIG_NAND
  24 #define CONFIG_SPL_INIT_MINIMAL
  25 #define CONFIG_SPL_NAND_BOOT
  26 #define CONFIG_SPL_FLUSH_IMAGE
  27 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  28
  29 #define CONFIG_SPL_TEXT_BASE            0xFFFFE000
  30 #define CONFIG_SPL_MAX_SIZE             8192
  31 #define CONFIG_SPL_RELOC_TEXT_BASE      0x00100000
  32 #define CONFIG_SPL_RELOC_STACK          0x00100000
  33 #define CONFIG_SYS_NAND_U_BOOT_SIZE     ((768 << 10) - 0x2000)
  34 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x00200000 - CONFIG_SPL_MAX_SIZE)
  35 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  36 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0
  37 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  38 #endif
  39
  40 #ifdef CONFIG_SPL_BUILD
  41 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  42 #else
  43 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  44 #endif
  45
  46 /* High Level Configuration Options */
  47
  48 #define CONFIG_TSEC_ENET
  49 #define CONFIG_ENV_OVERWRITE
  50
  51 #define CONFIG_DDR_CLK_FREQ     66666666 /* DDRCLK on 9131 RDB */
  52 #if defined(CONFIG_SYS_CLK_100)
  53 #define CONFIG_SYS_CLK_FREQ    100000000 /* SYSCLK for 9131 RDB */
  54 #else
  55 #define CONFIG_SYS_CLK_FREQ     66666666 /* SYSCLK for 9131 RDB */
  56 #endif
  57
  58 #define CONFIG_HWCONFIG
  59 /*
  60  * These can be toggled for performance analysis, otherwise use default.
  61  */
  62 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
  63 #define CONFIG_BTB                      /* enable branch predition */
  64
  65 #define CONFIG_SYS_MEMTEST_START        0x01000000      /* memtest works on */
  66 #define CONFIG_SYS_MEMTEST_END          0x01ffffff
  67
  68 /* DDR Setup */
  69 #undef CONFIG_SYS_DDR_RAW_TIMING
  70 #undef CONFIG_DDR_SPD
  71 #define CONFIG_SYS_SPD_BUS_NUM          0
  72 #define SPD_EEPROM_ADDRESS              0x52 /* I2C access */
  73
  74 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
  75
  76 #ifndef __ASSEMBLY__
  77 extern unsigned long get_sdram_size(void);
  78 #endif
  79 #define CONFIG_SYS_SDRAM_SIZE           get_sdram_size() /* DDR size */
  80 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  81 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  82
  83 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  84 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  85
  86 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
  87 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
  88 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
  89
  90 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
  91 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
  92 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
  93 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
  94
  95 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
  96 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
  97 #define CONFIG_SYS_DDR_RCW_1            0x00000000
  98 #define CONFIG_SYS_DDR_RCW_2            0x00000000
  99 #define CONFIG_SYS_DDR_CONTROL          0xC70C0000      /* Type = DDR3  */
 100 #define CONFIG_SYS_DDR_CONTROL_2        0x24401000
 101 #define CONFIG_SYS_DDR_TIMING_4         0x00000001
 102 #define CONFIG_SYS_DDR_TIMING_5         0x02401400
 103
 104 #define CONFIG_SYS_DDR_TIMING_3_800             0x00030000
 105 #define CONFIG_SYS_DDR_TIMING_0_800             0x00110104
 106 #define CONFIG_SYS_DDR_TIMING_1_800             0x6f6b8644
 107 #define CONFIG_SYS_DDR_TIMING_2_800             0x0fa888cf
 108 #define CONFIG_SYS_DDR_CLK_CTRL_800             0x03000000
 109 #define CONFIG_SYS_DDR_MODE_1_800               0x00441420
 110 #define CONFIG_SYS_DDR_MODE_2_800               0x8000c000
 111 #define CONFIG_SYS_DDR_INTERVAL_800             0x0c300100
 112 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800        0x8675f608
 113
 114 /*
 115  * Base addresses -- Note these are effective addresses where the
 116  * actual resources get mapped (not physical addresses)
 117  */
 118 /* relocated CCSRBAR */
 119 #define CONFIG_SYS_CCSRBAR      CONFIG_SYS_CCSRBAR_DEFAULT
 120 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR_DEFAULT
 121
 122 #define CONFIG_SYS_IMMR         CONFIG_SYS_CCSRBAR      /* PQII uses */
 123                                                         /* CONFIG_SYS_IMMR */
 124 /* DSP CCSRBAR */
 125 #define CONFIG_SYS_FSL_DSP_CCSRBAR      CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 126 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
 127
 128 /*
 129  * Memory map
 130  *
 131  * 0x0000_0000  0x3FFF_FFFF     DDR                     1G cacheable
 132  * 0x8800_0000  0x8810_0000     IFC internal SRAM               1M
 133  * 0xB000_0000  0xB0FF_FFFF     DSP core M2 memory      16M
 134  * 0xC100_0000  0xC13F_FFFF     MAPLE-2F                4M
 135  * 0xC1F0_0000  0xC1F3_FFFF     PA L2 SRAM Region 0     256K
 136  * 0xC1F8_0000  0xC1F9_FFFF     PA L2 SRAM Region 1     128K
 137  * 0xFED0_0000  0xFED0_3FFF     SEC Secured RAM         16K
 138  * 0xFF60_0000  0xFF6F_FFFF     DSP CCSR                1M
 139  * 0xFF70_0000  0xFF7F_FFFF     PA CCSR                 1M
 140  * 0xFF80_0000  0xFFFF_FFFF     Boot Page & NAND flash buffer   8M
 141  *
 142  */
 143
 144 /*
 145  * IFC Definitions
 146  */
 147
 148 /* NAND Flash on IFC */
 149 #define CONFIG_SYS_NAND_BASE            0xff800000
 150 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 151
 152 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 153                                 | CSPR_PORT_SIZE_8      /* Port Size = 8 bit*/ \
 154                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 155                                 | CSPR_V)
 156 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 157
 158 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 159                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 160                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 161                                 | CSOR_NAND_RAL_2       /* RAL = 2Byes */ \
 162                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 163                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */ \
 164                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 165
 166 /* NAND Flash Timing Params */
 167 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x03)  \
 168                                         | FTIM0_NAND_TWP(0x05)   \
 169                                         | FTIM0_NAND_TWCHT(0x02) \
 170                                         | FTIM0_NAND_TWH(0x04))
 171 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x1C) \
 172                                         | FTIM1_NAND_TWBE(0x1E) \
 173                                         | FTIM1_NAND_TRR(0x07)  \
 174                                         | FTIM1_NAND_TRP(0x05))
 175 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x08)  \
 176                                         | FTIM2_NAND_TREH(0x04) \
 177                                         | FTIM2_NAND_TWHRE(0x11))
 178 #define CONFIG_SYS_NAND_FTIM3           FTIM3_NAND_TWW(0x04)
 179
 180 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 181 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 182 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 183
 184 #define CONFIG_SYS_NAND_DDR_LAW         11
 185
 186 /* Set up IFC registers for boot location NAND */
 187 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 188 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 189 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 190 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 191 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 192 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 193 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 194
 195 #define CONFIG_SYS_INIT_RAM_LOCK
 196 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* stack in RAM */
 197 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000/* End of used area in RAM */
 198
 199 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 200                                                 - GENERATED_GBL_DATA_SIZE)
 201 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 202
 203 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 204 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc*/
 205
 206 /* Serial Port */
 207 #define CONFIG_CONS_INDEX       1
 208 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 209 #define CONFIG_SYS_NS16550_SERIAL
 210 #define CONFIG_SYS_NS16550_REG_SIZE     1
 211 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 212 #ifdef CONFIG_SPL_BUILD
 213 #define CONFIG_NS16550_MIN_FUNCTIONS
 214 #endif
 215
 216 #define CONFIG_SYS_BAUDRATE_TABLE       \
 217         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 218
 219 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 220
 221 #define CONFIG_SYS_I2C
 222 #define CONFIG_SYS_I2C_FSL
 223 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 224 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 225 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 226
 227 /* I2C EEPROM */
 228 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 229 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 230 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 231
 232 /* eSPI - Enhanced SPI */
 233 #ifdef CONFIG_FSL_ESPI
 234 #define CONFIG_SF_DEFAULT_SPEED         10000000
 235 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 236 #endif
 237
 238 #if defined(CONFIG_TSEC_ENET)
 239
 240 #define CONFIG_MII                      /* MII PHY management */
 241 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 242 #define CONFIG_TSEC1    1
 243 #define CONFIG_TSEC1_NAME       "eTSEC1"
 244 #define CONFIG_TSEC2    1
 245 #define CONFIG_TSEC2_NAME       "eTSEC2"
 246
 247 #define TSEC1_PHY_ADDR          0
 248 #define TSEC2_PHY_ADDR          3
 249
 250 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 251 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 252
 253 #define TSEC1_PHYIDX            0
 254
 255 #define TSEC2_PHYIDX            0
 256
 257 #define CONFIG_ETHPRIME         "eTSEC1"
 258
 259 #endif  /* CONFIG_TSEC_ENET */
 260
 261 /*
 262  * Environment
 263  */
 264 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 265 #define CONFIG_ENV_SPI_BUS      0
 266 #define CONFIG_ENV_SPI_CS       0
 267 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 268 #define CONFIG_ENV_SPI_MODE     0
 269 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 270 #define CONFIG_ENV_SECT_SIZE    0x10000
 271 #define CONFIG_ENV_SIZE         0x2000
 272 #elif defined(CONFIG_NAND)
 273 #define CONFIG_SYS_EXTRA_ENV_RELOC
 274 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 275 #define CONFIG_ENV_OFFSET       ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 276 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 277 #elif defined(CONFIG_SYS_RAMBOOT)
 278 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 279 #define CONFIG_ENV_SIZE         0x2000
 280 #endif
 281
 282 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 283 #define CONFIG_SYS_LOADS_BAUD_CHANGE            /* allow baudrate change */
 284
 285 /*
 286  * Miscellaneous configurable options
 287  */
 288 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 289
 290 #if defined(CONFIG_CMD_KGDB)
 291 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 292 #else
 293 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 294 #endif
 295 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 296
 297 /*
 298  * For booting Linux, the board info and command line data
 299  * have to be in the first 64 MB of memory, since this is
 300  * the maximum mapped by the Linux kernel during initialization.
 301  */
 302 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 303 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 304
 305 #if defined(CONFIG_CMD_KGDB)
 306 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 307 #endif
 308
 309 #ifdef CONFIG_USB_EHCI_HCD
 310 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 311 #define CONFIG_USB_EHCI_FSL
 312 #define CONFIG_HAS_FSL_DR_USB
 313 #endif
 314
 315 /*
 316  * Dynamic MTD Partition support with mtdparts
 317  */
 318 #define CONFIG_MTD_DEVICE
 319 #define CONFIG_MTD_PARTITIONS
 320
 321 /*
 322  * Environment Configuration
 323  */
 324
 325 #if defined(CONFIG_TSEC_ENET)
 326 #define CONFIG_HAS_ETH0
 327 #endif
 328
 329 #define CONFIG_HOSTNAME         BSC9131rdb
 330 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 331 #define CONFIG_BOOTFILE         "uImage"
 332 #define CONFIG_UBOOTPATH        "u-boot.bin" /* U-Boot image on TFTP server */
 333
 334 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 335         "netdev=eth0\0"                                         \
 336         "uboot=" CONFIG_UBOOTPATH "\0"                          \
 337         "loadaddr=1000000\0"                    \
 338         "bootfile=uImage\0"     \
 339         "consoledev=ttyS0\0"                            \
 340         "ramdiskaddr=2000000\0"                 \
 341         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 342         "fdtaddr=1e00000\0"                             \
 343         "fdtfile=bsc9131rdb.dtb\0"              \
 344         "bdev=sda1\0"   \
 345         "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
 346         "bootm_size=0x37000000\0"       \
 347         "othbootargs=ramdisk_size=600000 " \
 348         "default_hugepagesz=256m hugepagesz=256m hugepages=1\0" \
 349         "usbext2boot=setenv bootargs root=/dev/ram rw " \
 350         "console=$consoledev,$baudrate $othbootargs; "  \
 351         "usb start;"                    \
 352         "ext2load usb 0:4 $loadaddr $bootfile;"         \
 353         "ext2load usb 0:4 $fdtaddr $fdtfile;"   \
 354         "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"   \
 355         "bootm $loadaddr $ramdiskaddr $fdtaddr\0"       \
 356
 357 #define CONFIG_RAMBOOTCOMMAND           \
 358         "setenv bootargs root=/dev/ram rw "     \
 359         "console=$consoledev,$baudrate $othbootargs; "  \
 360         "tftp $ramdiskaddr $ramdiskfile;"       \
 361         "tftp $loadaddr $bootfile;"             \
 362         "tftp $fdtaddr $fdtfile;"               \
 363         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 364
 365 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 366
 367 #endif  /* __CONFIG_H */