include/configs/B4860QDS.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2011-2012 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __CONFIG_H
   7 #define __CONFIG_H
   8
   9 /*
  10  * B4860 QDS board configuration file
  11  */
  12 #ifdef CONFIG_RAMBOOT_PBL
  13 #define CONFIG_SYS_FSL_PBL_PBI  $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
  14 #define CONFIG_SYS_FSL_PBL_RCW  $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
  15 #ifndef CONFIG_NAND
  16 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  18 #else
  19 #define CONFIG_SPL_FLUSH_IMAGE
  20 #define CONFIG_SPL_TEXT_BASE            0xFFFD8000
  21 #define CONFIG_SPL_PAD_TO               0x40000
  22 #define CONFIG_SPL_MAX_SIZE             0x28000
  23 #define RESET_VECTOR_OFFSET             0x27FFC
  24 #define BOOT_PAGE_OFFSET                0x27000
  25 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (768 << 10)
  26 #define CONFIG_SYS_NAND_U_BOOT_DST      0x00200000
  27 #define CONFIG_SYS_NAND_U_BOOT_START    0x00200000
  28 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (256 << 10)
  29 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  30 #define CONFIG_SPL_NAND_BOOT
  31 #ifdef CONFIG_SPL_BUILD
  32 #define CONFIG_SPL_SKIP_RELOCATE
  33 #define CONFIG_SPL_COMMON_INIT_DDR
  34 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  35 #endif
  36 #endif
  37 #endif
  38
  39 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
  40 /* Set 1M boot space */
  41 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
  42 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
  43                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
  44 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
  45 #endif
  46
  47 /* High Level Configuration Options */
  48 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  49
  50 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  51 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  52 #endif
  53
  54 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  55 #define CONFIG_SYS_NUM_CPC              CONFIG_SYS_NUM_DDR_CTLRS
  56 #define CONFIG_PCIE1                    /* PCIE controller 1 */
  57 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  58 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  59
  60 #ifndef CONFIG_ARCH_B4420
  61 #define CONFIG_SYS_SRIO
  62 #define CONFIG_SRIO1                    /* SRIO port 1 */
  63 #define CONFIG_SRIO2                    /* SRIO port 2 */
  64 #define CONFIG_SRIO_PCIE_BOOT_MASTER
  65 #endif
  66
  67 /* I2C bus multiplexer */
  68 #define I2C_MUX_PCA_ADDR                0x77
  69
  70 /* VSC Crossbar switches */
  71 #define CONFIG_VSC_CROSSBAR
  72 #define I2C_CH_DEFAULT                  0x8
  73 #define I2C_CH_VSC3316                  0xc
  74 #define I2C_CH_VSC3308                  0xd
  75
  76 #define VSC3316_TX_ADDRESS              0x70
  77 #define VSC3316_RX_ADDRESS              0x71
  78 #define VSC3308_TX_ADDRESS              0x02
  79 #define VSC3308_RX_ADDRESS              0x03
  80
  81 /* IDT clock synthesizers */
  82 #define CONFIG_IDT8T49N222A
  83 #define I2C_CH_IDT                     0x9
  84
  85 #define IDT_SERDES1_ADDRESS            0x6E
  86 #define IDT_SERDES2_ADDRESS            0x6C
  87
  88 /* Voltage monitor on channel 2*/
  89 #define I2C_MUX_CH_VOL_MONITOR          0xa
  90 #define I2C_VOL_MONITOR_ADDR            0x40
  91 #define I2C_VOL_MONITOR_BUS_V_OFFSET    0x2
  92 #define I2C_VOL_MONITOR_BUS_V_OVF       0x1
  93 #define I2C_VOL_MONITOR_BUS_V_SHIFT     3
  94
  95 #define CONFIG_ZM7300
  96 #define I2C_MUX_CH_DPM                  0xa
  97 #define I2C_DPM_ADDR                    0x28
  98
  99 #define CONFIG_ENV_OVERWRITE
 100
 101 #if defined(CONFIG_SPIFLASH)
 102 #define CONFIG_ENV_SPI_BUS              0
 103 #define CONFIG_ENV_SPI_CS               0
 104 #define CONFIG_ENV_SPI_MAX_HZ           10000000
 105 #define CONFIG_ENV_SPI_MODE             0
 106 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 107 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 108 #define CONFIG_ENV_SECT_SIZE            0x10000
 109 #elif defined(CONFIG_SDCARD)
 110 #define CONFIG_SYS_MMC_ENV_DEV          0
 111 #define CONFIG_ENV_SIZE                 0x2000
 112 #define CONFIG_ENV_OFFSET               (512 * 1097)
 113 #elif defined(CONFIG_NAND)
 114 #define CONFIG_ENV_SIZE                 0x2000
 115 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 116 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 117 #define CONFIG_ENV_ADDR         0xffe20000
 118 #define CONFIG_ENV_SIZE         0x2000
 119 #elif defined(CONFIG_ENV_IS_NOWHERE)
 120 #define CONFIG_ENV_SIZE         0x2000
 121 #else
 122 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 123 #define CONFIG_ENV_SIZE         0x2000
 124 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 125 #endif
 126
 127 #ifndef __ASSEMBLY__
 128 unsigned long get_board_sys_clk(void);
 129 unsigned long get_board_ddr_clk(void);
 130 #endif
 131 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 132 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 133
 134 /*
 135  * These can be toggled for performance analysis, otherwise use default.
 136  */
 137 #define CONFIG_SYS_CACHE_STASHING
 138 #define CONFIG_BTB                      /* toggle branch predition */
 139 #define CONFIG_DDR_ECC
 140 #ifdef CONFIG_DDR_ECC
 141 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 142 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 143 #endif
 144
 145 #define CONFIG_ENABLE_36BIT_PHYS
 146
 147 #ifdef CONFIG_PHYS_64BIT
 148 #define CONFIG_ADDR_MAP
 149 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 150 #endif
 151
 152 #if 0
 153 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 154 #endif
 155 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 156 #define CONFIG_SYS_MEMTEST_END          0x00400000
 157
 158 /*
 159  *  Config the L3 Cache as L3 SRAM
 160  */
 161 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 162 #define CONFIG_SYS_L3_SIZE              256 << 10
 163 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
 164 #ifdef CONFIG_NAND
 165 #define CONFIG_ENV_ADDR                 (CONFIG_SPL_GD_ADDR + 4 * 1024)
 166 #endif
 167 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SPL_GD_ADDR + 12 * 1024)
 168 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (30 << 10)
 169 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SPL_GD_ADDR + 64 * 1024)
 170
 171 #ifdef CONFIG_PHYS_64BIT
 172 #define CONFIG_SYS_DCSRBAR              0xf0000000
 173 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 174 #endif
 175
 176 /* EEPROM */
 177 #define CONFIG_ID_EEPROM
 178 #define CONFIG_SYS_I2C_EEPROM_NXID
 179 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 180 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 181 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 182 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 183 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 184
 185 /*
 186  * DDR Setup
 187  */
 188 #define CONFIG_VERY_BIG_RAM
 189 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 190 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 191
 192 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 193 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 194
 195 #define CONFIG_DDR_SPD
 196 #define CONFIG_SYS_DDR_RAW_TIMING
 197 #ifndef CONFIG_SPL_BUILD
 198 #define CONFIG_FSL_DDR_INTERACTIVE
 199 #endif
 200
 201 #define CONFIG_SYS_SPD_BUS_NUM  0
 202 #define SPD_EEPROM_ADDRESS1     0x51
 203 #define SPD_EEPROM_ADDRESS2     0x53
 204
 205 #define SPD_EEPROM_ADDRESS      SPD_EEPROM_ADDRESS1
 206 #define CONFIG_SYS_SDRAM_SIZE   2048    /* for fixed parameter use */
 207
 208 /*
 209  * IFC Definitions
 210  */
 211 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 212 #ifdef CONFIG_PHYS_64BIT
 213 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 214 #else
 215 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 216 #endif
 217
 218 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 219 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 220                                 + 0x8000000) | \
 221                                 CSPR_PORT_SIZE_16 | \
 222                                 CSPR_MSEL_NOR | \
 223                                 CSPR_V)
 224 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 225 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 226                                 CSPR_PORT_SIZE_16 | \
 227                                 CSPR_MSEL_NOR | \
 228                                 CSPR_V)
 229 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128 * 1024 * 1024)
 230 /* NOR Flash Timing Params */
 231 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 232 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x01) | \
 233                                 FTIM0_NOR_TEADC(0x04) | \
 234                                 FTIM0_NOR_TEAHC(0x20))
 235 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 236                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 237                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 238 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x01) | \
 239                                 FTIM2_NOR_TCH(0x0E) | \
 240                                 FTIM2_NOR_TWPH(0x0E) | \
 241                                 FTIM2_NOR_TWP(0x1c))
 242 #define CONFIG_SYS_NOR_FTIM3    0x0
 243
 244 #define CONFIG_SYS_FLASH_QUIET_TEST
 245 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 246
 247 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 248 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 249 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 250 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 251
 252 #define CONFIG_SYS_FLASH_EMPTY_INFO
 253 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 254                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 255
 256 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 257 #define CONFIG_FSL_QIXIS_V2
 258 #define QIXIS_BASE              0xffdf0000
 259 #ifdef CONFIG_PHYS_64BIT
 260 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 261 #else
 262 #define QIXIS_BASE_PHYS         QIXIS_BASE
 263 #endif
 264 #define QIXIS_LBMAP_SWITCH              0x01
 265 #define QIXIS_LBMAP_MASK                0x0f
 266 #define QIXIS_LBMAP_SHIFT               0
 267 #define QIXIS_LBMAP_DFLTBANK            0x00
 268 #define QIXIS_LBMAP_ALTBANK             0x02
 269 #define QIXIS_RST_CTL_RESET             0x31
 270 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 271 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 272 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 273
 274 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 275 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 276                                 | CSPR_PORT_SIZE_8 \
 277                                 | CSPR_MSEL_GPCM \
 278                                 | CSPR_V)
 279 #define CONFIG_SYS_AMASK3       IFC_AMASK(4 * 1024)
 280 #define CONFIG_SYS_CSOR3        0x0
 281 /* QIXIS Timing parameters for IFC CS3 */
 282 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 283                                         FTIM0_GPCM_TEADC(0x0e) | \
 284                                         FTIM0_GPCM_TEAHC(0x0e))
 285 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0x0e) | \
 286                                         FTIM1_GPCM_TRAD(0x1f))
 287 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 288                                         FTIM2_GPCM_TCH(0x8) | \
 289                                         FTIM2_GPCM_TWP(0x1f))
 290 #define CONFIG_SYS_CS3_FTIM3            0x0
 291
 292 /* NAND Flash on IFC */
 293 #define CONFIG_NAND_FSL_IFC
 294 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 295 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 296 #define CONFIG_SYS_NAND_BASE            0xff800000
 297 #ifdef CONFIG_PHYS_64BIT
 298 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 299 #else
 300 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 301 #endif
 302
 303 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 304 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 305                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 306                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 307                                 | CSPR_V)
 308 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 309
 310 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 311                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 312                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 313                                 | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
 314                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 315                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 316                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 317
 318 #define CONFIG_SYS_NAND_ONFI_DETECTION
 319
 320 /* ONFI NAND Flash mode0 Timing Params */
 321 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 322                                         FTIM0_NAND_TWP(0x18)   | \
 323                                         FTIM0_NAND_TWCHT(0x07) | \
 324                                         FTIM0_NAND_TWH(0x0a))
 325 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 326                                         FTIM1_NAND_TWBE(0x39)  | \
 327                                         FTIM1_NAND_TRR(0x0e)   | \
 328                                         FTIM1_NAND_TRP(0x18))
 329 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 330                                         FTIM2_NAND_TREH(0x0a) | \
 331                                         FTIM2_NAND_TWHRE(0x1e))
 332 #define CONFIG_SYS_NAND_FTIM3           0x0
 333
 334 #define CONFIG_SYS_NAND_DDR_LAW         11
 335
 336 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 337 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 338
 339 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 340
 341 #if defined(CONFIG_NAND)
 342 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 343 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 344 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 345 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 346 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 347 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 348 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 349 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 350 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 351 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR0_CSPR
 352 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 353 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 354 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 355 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 356 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 357 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 358 #else
 359 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 360 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 361 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 362 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 363 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 364 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 365 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 366 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 367 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 368 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 369 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 370 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 371 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 372 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 373 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 374 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 375 #endif
 376 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 377 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 378 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 379 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 380 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 381 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 382 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 383 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 384
 385 #ifdef CONFIG_SPL_BUILD
 386 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 387 #else
 388 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 389 #endif
 390
 391 #if defined(CONFIG_RAMBOOT_PBL)
 392 #define CONFIG_SYS_RAMBOOT
 393 #endif
 394
 395 #define CONFIG_HWCONFIG
 396
 397 /* define to use L1 as initial stack */
 398 #define CONFIG_L1_INIT_RAM
 399 #define CONFIG_SYS_INIT_RAM_LOCK
 400 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 401 #ifdef CONFIG_PHYS_64BIT
 402 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 403 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 404 /* The assembler doesn't like typecast */
 405 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 406         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 407           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 408 #else
 409 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   0xfe03c000 /* Initial L1 address */
 410 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 411 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 412 #endif
 413 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 414
 415 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 416                                         GENERATED_GBL_DATA_SIZE)
 417 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 418
 419 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 420 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
 421
 422 /* Serial Port - controlled on board with jumper J8
 423  * open - index 2
 424  * shorted - index 1
 425  */
 426 #define CONFIG_SYS_NS16550_SERIAL
 427 #define CONFIG_SYS_NS16550_REG_SIZE     1
 428 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 429
 430 #define CONFIG_SYS_BAUDRATE_TABLE       \
 431         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 432
 433 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 434 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 435 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 436 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 437
 438 /* I2C */
 439 #define CONFIG_SYS_I2C
 440 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 441 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C speed in Hz */
 442 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 443 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C speed in Hz */
 444 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 445 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 446 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x119000
 447
 448 /*
 449  * RTC configuration
 450  */
 451 #define RTC
 452 #define CONFIG_RTC_DS3231               1
 453 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 454
 455 /*
 456  * RapidIO
 457  */
 458 #ifdef CONFIG_SYS_SRIO
 459 #ifdef CONFIG_SRIO1
 460 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 461 #ifdef CONFIG_PHYS_64BIT
 462 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 463 #else
 464 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 465 #endif
 466 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 467 #endif
 468
 469 #ifdef CONFIG_SRIO2
 470 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 471 #ifdef CONFIG_PHYS_64BIT
 472 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 473 #else
 474 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 475 #endif
 476 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 477 #endif
 478 #endif
 479
 480 /*
 481  * for slave u-boot IMAGE instored in master memory space,
 482  * PHYS must be aligned based on the SIZE
 483  */
 484 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
 485 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
 486 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000       /* 1M */
 487 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
 488 /*
 489  * for slave UCODE and ENV instored in master memory space,
 490  * PHYS must be aligned based on the SIZE
 491  */
 492 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
 493 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
 494 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000    /* 256K */
 495
 496 /* slave core release by master*/
 497 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
 498 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
 499
 500 /*
 501  * SRIO_PCIE_BOOT - SLAVE
 502  */
 503 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
 504 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
 505 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
 506                 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
 507 #endif
 508
 509 /*
 510  * eSPI - Enhanced SPI
 511  */
 512 #define CONFIG_SF_DEFAULT_SPEED         10000000
 513 #define CONFIG_SF_DEFAULT_MODE          0
 514
 515 /*
 516  * MAPLE
 517  */
 518 #ifdef CONFIG_PHYS_64BIT
 519 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
 520 #else
 521 #define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
 522 #endif
 523
 524 /*
 525  * General PCI
 526  * Memory space is mapped 1-1, but I/O space must start from 0.
 527  */
 528
 529 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 530 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 531 #ifdef CONFIG_PHYS_64BIT
 532 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 533 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 534 #else
 535 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 536 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 537 #endif
 538 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 539 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 540 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 541 #ifdef CONFIG_PHYS_64BIT
 542 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 543 #else
 544 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 545 #endif
 546 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 547
 548 /* Qman/Bman */
 549 #ifndef CONFIG_NOBQFMAN
 550 #define CONFIG_SYS_BMAN_NUM_PORTALS     25
 551 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 552 #ifdef CONFIG_PHYS_64BIT
 553 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 554 #else
 555 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 556 #endif
 557 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 558 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 559 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 560 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 561 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 562 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 563                                         CONFIG_SYS_BMAN_CENA_SIZE)
 564 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 565 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 566 #define CONFIG_SYS_QMAN_NUM_PORTALS     25
 567 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 568 #ifdef CONFIG_PHYS_64BIT
 569 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 570 #else
 571 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 572 #endif
 573 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 574 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 575 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 576 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 577 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 578 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 579                                         CONFIG_SYS_QMAN_CENA_SIZE)
 580 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 581 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 582
 583 #define CONFIG_SYS_DPAA_FMAN
 584
 585 #define CONFIG_SYS_DPAA_RMAN
 586
 587 /* Default address of microcode for the Linux Fman driver */
 588 #if defined(CONFIG_SPIFLASH)
 589 /*
 590  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 591  * env, so we got 0x110000.
 592  */
 593 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 594 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 595 #elif defined(CONFIG_SDCARD)
 596 /*
 597  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 598  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 599  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 600  */
 601 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 602 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130)
 603 #elif defined(CONFIG_NAND)
 604 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 605 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE)
 606 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
 607 /*
 608  * Slave has no ucode locally, it can fetch this from remote. When implementing
 609  * in two corenet boards, slave's ucode could be stored in master's memory
 610  * space, the address can be mapped from slave TLB->slave LAW->
 611  * slave SRIO or PCIE outbound window->master inbound window->
 612  * master LAW->the ucode address in master's memory space.
 613  */
 614 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 615 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
 616 #else
 617 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 618 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 619 #endif
 620 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 621 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 622 #endif /* CONFIG_NOBQFMAN */
 623
 624 #ifdef CONFIG_SYS_DPAA_FMAN
 625 #define CONFIG_FMAN_ENET
 626 #define CONFIG_PHYLIB_10G
 627 #define CONFIG_PHY_VITESSE
 628 #define CONFIG_PHY_TERANETICS
 629 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 630 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 631 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 632 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 633 #endif
 634
 635 #ifdef CONFIG_PCI
 636 #define CONFIG_PCI_INDIRECT_BRIDGE
 637
 638 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 639 #endif  /* CONFIG_PCI */
 640
 641 #ifdef CONFIG_FMAN_ENET
 642 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
 643 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
 644
 645 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */
 646 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7       /*SLOT 1*/
 647 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6       /*SLOT 2*/
 648
 649 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 650 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 651 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 652 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 653
 654 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 655 #endif
 656
 657 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
 658
 659 /*
 660  * Environment
 661  */
 662 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 663 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 664
 665 /*
 666 * USB
 667 */
 668 #define CONFIG_HAS_FSL_DR_USB
 669
 670 #ifdef CONFIG_HAS_FSL_DR_USB
 671 #ifdef CONFIG_USB_EHCI_HCD
 672 #define CONFIG_USB_EHCI_FSL
 673 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 674 #endif
 675 #endif
 676
 677 /*
 678  * Miscellaneous configurable options
 679  */
 680 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 681
 682 /*
 683  * For booting Linux, the board info and command line data
 684  * have to be in the first 64 MB of memory, since this is
 685  * the maximum mapped by the Linux kernel during initialization.
 686  */
 687 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 688 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 689
 690 #ifdef CONFIG_CMD_KGDB
 691 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 692 #endif
 693
 694 /*
 695  * Environment Configuration
 696  */
 697 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 698 #define CONFIG_BOOTFILE         "uImage"
 699 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 700
 701 /* default location for tftp and bootm */
 702 #define CONFIG_LOADADDR         1000000
 703
 704 #define __USB_PHY_TYPE  ulpi
 705
 706 #ifdef CONFIG_ARCH_B4860
 707 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,"     \
 708                         "bank_intlv=cs0_cs1;"   \
 709                         "en_cpc:cpc2;"
 710 #else
 711 #define HWCONFIG        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;"
 712 #endif
 713
 714 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 715         HWCONFIG                                                \
 716         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 717         "netdev=eth0\0"                                         \
 718         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                     \
 719         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"                     \
 720         "tftpflash=tftpboot $loadaddr $uboot && "               \
 721         "protect off $ubootaddr +$filesize && "                 \
 722         "erase $ubootaddr +$filesize && "                       \
 723         "cp.b $loadaddr $ubootaddr $filesize && "               \
 724         "protect on $ubootaddr +$filesize && "                  \
 725         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 726         "consoledev=ttyS0\0"                                    \
 727         "ramdiskaddr=2000000\0"                                 \
 728         "ramdiskfile=b4860qds/ramdisk.uboot\0"                  \
 729         "fdtaddr=1e00000\0"                                     \
 730         "fdtfile=b4860qds/b4860qds.dtb\0"                               \
 731         "bdev=sda3\0"
 732
 733 /* For emulation this causes u-boot to jump to the start of the proof point
 734    app code automatically */
 735 #define CONFIG_PROOF_POINTS                     \
 736  "setenv bootargs root=/dev/$bdev rw "          \
 737  "console=$consoledev,$baudrate $othbootargs;"  \
 738  "cpu 1 release 0x29000000 - - -;"              \
 739  "cpu 2 release 0x29000000 - - -;"              \
 740  "cpu 3 release 0x29000000 - - -;"              \
 741  "cpu 4 release 0x29000000 - - -;"              \
 742  "cpu 5 release 0x29000000 - - -;"              \
 743  "cpu 6 release 0x29000000 - - -;"              \
 744  "cpu 7 release 0x29000000 - - -;"              \
 745  "go 0x29000000"
 746
 747 #define CONFIG_HVBOOT   \
 748  "setenv bootargs config-addr=0x60000000; "     \
 749  "bootm 0x01000000 - 0x00f00000"
 750
 751 #define CONFIG_ALU                              \
 752  "setenv bootargs root=/dev/$bdev rw "          \
 753  "console=$consoledev,$baudrate $othbootargs;"  \
 754  "cpu 1 release 0x01000000 - - -;"              \
 755  "cpu 2 release 0x01000000 - - -;"              \
 756  "cpu 3 release 0x01000000 - - -;"              \
 757  "cpu 4 release 0x01000000 - - -;"              \
 758  "cpu 5 release 0x01000000 - - -;"              \
 759  "cpu 6 release 0x01000000 - - -;"              \
 760  "cpu 7 release 0x01000000 - - -;"              \
 761  "go 0x01000000"
 762
 763 #define CONFIG_LINUX                            \
 764  "setenv bootargs root=/dev/ram rw "            \
 765  "console=$consoledev,$baudrate $othbootargs;"  \
 766  "setenv ramdiskaddr 0x02000000;"               \
 767  "setenv fdtaddr 0x01e00000;"                   \
 768  "setenv loadaddr 0x1000000;"                   \
 769  "bootm $loadaddr $ramdiskaddr $fdtaddr"
 770
 771 #define CONFIG_HDBOOT                                   \
 772         "setenv bootargs root=/dev/$bdev rw "           \
 773         "console=$consoledev,$baudrate $othbootargs;"   \
 774         "tftp $loadaddr $bootfile;"                     \
 775         "tftp $fdtaddr $fdtfile;"                       \
 776         "bootm $loadaddr - $fdtaddr"
 777
 778 #define CONFIG_NFSBOOTCOMMAND                   \
 779         "setenv bootargs root=/dev/nfs rw "     \
 780         "nfsroot=$serverip:$rootpath "          \
 781         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 782         "console=$consoledev,$baudrate $othbootargs;"   \
 783         "tftp $loadaddr $bootfile;"             \
 784         "tftp $fdtaddr $fdtfile;"               \
 785         "bootm $loadaddr - $fdtaddr"
 786
 787 #define CONFIG_RAMBOOTCOMMAND                           \
 788         "setenv bootargs root=/dev/ram rw "             \
 789         "console=$consoledev,$baudrate $othbootargs;"   \
 790         "tftp $ramdiskaddr $ramdiskfile;"               \
 791         "tftp $loadaddr $bootfile;"                     \
 792         "tftp $fdtaddr $fdtfile;"                       \
 793         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 794
 795 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 796
 797 #include <asm/fsl_secure_boot.h>
 798
 799 #endif  /* __CONFIG_H */