8443cbb6b65fc6eae808f2184889f938fdb5d22d
[platform/kernel/u-boot.git] / drivers / net / fm / init.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright 2011-2015 Freescale Semiconductor, Inc.
4  */
5 #include <errno.h>
6 #include <common.h>
7 #include <net.h>
8 #include <asm/io.h>
9 #include <fdt_support.h>
10 #include <fsl_mdio.h>
11 #ifdef CONFIG_FSL_LAYERSCAPE
12 #include <asm/arch/fsl_serdes.h>
13 #include <linux/libfdt.h>
14 #else
15 #include <asm/fsl_serdes.h>
16 #endif
17
18 #include "fm.h"
19
20 #ifndef CONFIG_DM_ETH
21 struct fm_eth_info fm_info[] = {
22 #if (CFG_SYS_NUM_FM1_DTSEC >= 1)
23         FM_DTSEC_INFO_INITIALIZER(1, 1),
24 #endif
25 #if (CFG_SYS_NUM_FM1_DTSEC >= 2)
26         FM_DTSEC_INFO_INITIALIZER(1, 2),
27 #endif
28 #if (CFG_SYS_NUM_FM1_DTSEC >= 3)
29         FM_DTSEC_INFO_INITIALIZER(1, 3),
30 #endif
31 #if (CFG_SYS_NUM_FM1_DTSEC >= 4)
32         FM_DTSEC_INFO_INITIALIZER(1, 4),
33 #endif
34 #if (CFG_SYS_NUM_FM1_DTSEC >= 5)
35         FM_DTSEC_INFO_INITIALIZER(1, 5),
36 #endif
37 #if (CFG_SYS_NUM_FM1_DTSEC >= 6)
38         FM_DTSEC_INFO_INITIALIZER(1, 6),
39 #endif
40 #if (CFG_SYS_NUM_FM1_DTSEC >= 7)
41         FM_DTSEC_INFO_INITIALIZER(1, 9),
42 #endif
43 #if (CFG_SYS_NUM_FM1_DTSEC >= 8)
44         FM_DTSEC_INFO_INITIALIZER(1, 10),
45 #endif
46 #if (CFG_SYS_NUM_FM2_DTSEC >= 1)
47         FM_DTSEC_INFO_INITIALIZER(2, 1),
48 #endif
49 #if (CFG_SYS_NUM_FM2_DTSEC >= 2)
50         FM_DTSEC_INFO_INITIALIZER(2, 2),
51 #endif
52 #if (CFG_SYS_NUM_FM2_DTSEC >= 3)
53         FM_DTSEC_INFO_INITIALIZER(2, 3),
54 #endif
55 #if (CFG_SYS_NUM_FM2_DTSEC >= 4)
56         FM_DTSEC_INFO_INITIALIZER(2, 4),
57 #endif
58 #if (CFG_SYS_NUM_FM2_DTSEC >= 5)
59         FM_DTSEC_INFO_INITIALIZER(2, 5),
60 #endif
61 #if (CFG_SYS_NUM_FM2_DTSEC >= 6)
62         FM_DTSEC_INFO_INITIALIZER(2, 6),
63 #endif
64 #if (CFG_SYS_NUM_FM2_DTSEC >= 7)
65         FM_DTSEC_INFO_INITIALIZER(2, 9),
66 #endif
67 #if (CFG_SYS_NUM_FM2_DTSEC >= 8)
68         FM_DTSEC_INFO_INITIALIZER(2, 10),
69 #endif
70 #if (CFG_SYS_NUM_FM1_10GEC >= 1)
71         FM_TGEC_INFO_INITIALIZER(1, 1),
72 #endif
73 #if (CFG_SYS_NUM_FM1_10GEC >= 2)
74         FM_TGEC_INFO_INITIALIZER(1, 2),
75 #endif
76 #if (CFG_SYS_NUM_FM1_10GEC >= 3)
77         FM_TGEC_INFO_INITIALIZER2(1, 3),
78 #endif
79 #if (CFG_SYS_NUM_FM1_10GEC >= 4)
80         FM_TGEC_INFO_INITIALIZER2(1, 4),
81 #endif
82 #if (CFG_SYS_NUM_FM2_10GEC >= 1)
83         FM_TGEC_INFO_INITIALIZER(2, 1),
84 #endif
85 #if (CFG_SYS_NUM_FM2_10GEC >= 2)
86         FM_TGEC_INFO_INITIALIZER(2, 2),
87 #endif
88 };
89
90 int fm_standard_init(struct bd_info *bis)
91 {
92         int i;
93         struct ccsr_fman *reg;
94
95         reg = (void *)CFG_SYS_FSL_FM1_ADDR;
96         if (fm_init_common(0, reg))
97                 return 0;
98
99         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
100                 if ((fm_info[i].enabled) && (fm_info[i].index == 1))
101                         fm_eth_initialize(reg, &fm_info[i]);
102         }
103
104 #if (CFG_SYS_NUM_FMAN == 2)
105         reg = (void *)CFG_SYS_FSL_FM2_ADDR;
106         if (fm_init_common(1, reg))
107                 return 0;
108
109         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
110                 if ((fm_info[i].enabled) && (fm_info[i].index == 2))
111                         fm_eth_initialize(reg, &fm_info[i]);
112         }
113 #endif
114
115         return 1;
116 }
117
118 /* simple linear search to map from port to array index */
119 static int fm_port_to_index(enum fm_port port)
120 {
121         int i;
122
123         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
124                 if (fm_info[i].port == port)
125                         return i;
126         }
127
128         return -1;
129 }
130
131 /*
132  * Determine if an interface is actually active based on HW config
133  * we expect fman_port_enet_if() to report PHY_INTERFACE_MODE_NA if
134  * the interface is not active based on HW cfg of the SoC
135  */
136 void fman_enet_init(void)
137 {
138         int i;
139
140         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
141                 phy_interface_t enet_if;
142
143                 enet_if = fman_port_enet_if(fm_info[i].port);
144                 if (enet_if != PHY_INTERFACE_MODE_NA) {
145                         fm_info[i].enabled = 1;
146                         fm_info[i].enet_if = enet_if;
147                 } else {
148                         fm_info[i].enabled = 0;
149                 }
150         }
151
152         return;
153 }
154
155 void fm_disable_port(enum fm_port port)
156 {
157         int i = fm_port_to_index(port);
158
159         if (i == -1)
160                 return;
161
162         fm_info[i].enabled = 0;
163 #ifndef CONFIG_SYS_FMAN_V3
164         fman_disable_port(port);
165 #endif
166 }
167
168 void fm_enable_port(enum fm_port port)
169 {
170         int i = fm_port_to_index(port);
171
172         if (i == -1)
173                 return;
174
175         fm_info[i].enabled = 1;
176         fman_enable_port(port);
177 }
178
179 void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
180 {
181         int i = fm_port_to_index(port);
182
183         if (i == -1)
184                 return;
185
186         fm_info[i].bus = bus;
187 }
188
189 void fm_info_set_phy_address(enum fm_port port, int address)
190 {
191         int i = fm_port_to_index(port);
192
193         if (i == -1)
194                 return;
195
196         fm_info[i].phy_addr = address;
197 }
198
199 /*
200  * Returns the PHY address for a given Fman port
201  *
202  * The port must be set via a prior call to fm_info_set_phy_address().
203  * A negative error code is returned if the port is invalid.
204  */
205 int fm_info_get_phy_address(enum fm_port port)
206 {
207         int i = fm_port_to_index(port);
208
209         if (i == -1)
210                 return -1;
211
212         return fm_info[i].phy_addr;
213 }
214
215 /*
216  * Returns the type of the data interface between the given MAC and its PHY.
217  * This is typically determined by the RCW.
218  */
219 phy_interface_t fm_info_get_enet_if(enum fm_port port)
220 {
221         int i = fm_port_to_index(port);
222
223         if (i == -1)
224                 return PHY_INTERFACE_MODE_NA;
225
226         if (fm_info[i].enabled)
227                 return fm_info[i].enet_if;
228
229         return PHY_INTERFACE_MODE_NA;
230 }
231
232 static void
233 __def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
234                                 enum fm_port port, int offset)
235 {
236         return;
237 }
238
239 void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
240                                 enum fm_port port, int offset)
241          __attribute__((weak, alias("__def_board_ft_fman_fixup_port")));
242
243 int ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
244 {
245         int off;
246         uint32_t ph;
247         phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset;
248 #ifndef CONFIG_SYS_FMAN_V3
249         u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS +
250                                 CFG_SYS_FSL_FM1_DTSEC1_OFFSET;
251 #endif
252
253         off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
254         if (off == -FDT_ERR_NOTFOUND)
255                 return -EINVAL;
256
257         if (info->enabled) {
258                 fdt_fixup_phy_connection(blob, off, info->enet_if);
259                 board_ft_fman_fixup_port(blob, prop, paddr, info->port, off);
260                 return 0;
261         }
262
263 #ifdef CONFIG_SYS_FMAN_V3
264 #ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
265         /*
266          * On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same
267          * dual-role MAC, when FM1_10GEC1 is enabled and  FM1_DTSEC9
268          * is disabled, ensure that the dual-role MAC is not disabled,
269          * ditto for other dual-role MACs.
270          */
271         if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
272             ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
273             ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
274             ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
275             ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))  ||
276             ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
277             ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
278             ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))
279 #if (CFG_SYS_NUM_FMAN == 2)
280                                                                                 ||
281             ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1)))       ||
282             ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2)))      ||
283             ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9)))       ||
284             ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
285 #endif
286 #else
287         /* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */
288         if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
289             ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2)))  ||
290             ((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
291             ((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
292             ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
293             ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2)))  ||
294             ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3)))  ||
295             ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4)))
296 #endif
297         )
298                 return 0;
299 #endif
300         /* board code might have caused offset to change */
301         off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
302
303 #ifndef CONFIG_SYS_FMAN_V3
304         /* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
305         if (paddr != dtsec1_addr)
306 #endif
307                 fdt_status_disabled(blob, off); /* disable the MAC node */
308
309         /* disable the fsl,dpa-ethernet node that points to the MAC */
310         ph = fdt_get_phandle(blob, off);
311         do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
312                 "status", "disabled", strlen("disabled") + 1, 1);
313
314         return 0;
315 }
316
317 void fdt_fixup_fman_ethernet(void *blob)
318 {
319         int i;
320
321 #ifdef CONFIG_SYS_FMAN_V3
322         for (i = 0; i < ARRAY_SIZE(fm_info); i++)
323                 ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
324 #else
325         for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
326                 /* Try the new compatible first.
327                  * If the node is missing, try the old.
328                  */
329                 if (fm_info[i].type == FM_ETH_1G_E) {
330                         if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-dtsec"))
331                                 ft_fixup_port(blob, &fm_info[i],
332                                               "fsl,fman-1g-mac");
333                 } else {
334                         if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-xgec") &&
335                             ft_fixup_port(blob, &fm_info[i], "fsl,fman-tgec"))
336                                 ft_fixup_port(blob, &fm_info[i],
337                                               "fsl,fman-10g-mac");
338                 }
339         }
340 #endif
341 }
342
343 /*QSGMII Riser Card can work in SGMII mode, but the PHY address is different.
344  *This function scans which Riser Card being used(QSGMII or SGMII Riser Card),
345  *then set the correct PHY address
346  */
347 void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
348                 unsigned int port_num, int phy_base_addr)
349 {
350         unsigned int regnum = 0;
351         int qsgmii;
352         int i;
353         int phy_real_addr;
354
355         qsgmii = is_qsgmii_riser_card(bus, phy_base_addr, port_num, regnum);
356
357         if (!qsgmii)
358                 return;
359
360         for (i = base_port; i < base_port + port_num; i++) {
361                 if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_SGMII) {
362                         phy_real_addr = phy_base_addr + i - base_port;
363                         fm_info_set_phy_address(i, phy_real_addr);
364                 }
365         }
366 }
367
368 /*to check whether qsgmii riser card is used*/
369 int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
370                 unsigned int port_num, unsigned regnum)
371 {
372         int i;
373         int val;
374
375         if (!bus)
376                 return 0;
377
378         for (i = phy_base_addr; i < phy_base_addr + port_num; i++) {
379                 val = bus->read(bus, i, MDIO_DEVAD_NONE, regnum);
380                 if (val != MIIM_TIMEOUT)
381                         return 1;
382         }
383
384         return 0;
385 }
386 #endif /* CONFIG_DM_ETH */