drivers/ddr/fsl/util.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright 2008-2014 Freescale Semiconductor, Inc.
   4  * Copyright 2021 NXP
   5  */
   6
   7 #include <common.h>
   8 #ifdef CONFIG_PPC
   9 #include <asm/fsl_law.h>
  10 #endif
  11 #include <div64.h>
  12 #include <linux/delay.h>
  13
  14 #include <fsl_ddr.h>
  15 #include <fsl_immap.h>
  16 #include <log.h>
  17 #include <asm/io.h>
  18 #if defined(CONFIG_FSL_LSCH2) || defined(CONFIG_FSL_LSCH3) || \
  19         defined(CONFIG_ARM)
  20 #include <asm/arch/clock.h>
  21 #endif
  22
  23 /* To avoid 64-bit full-divides, we factor this here */
  24 #define ULL_2E12 2000000000000ULL
  25 #define UL_5POW12 244140625UL
  26 #define UL_2POW13 (1UL << 13)
  27
  28 #define ULL_8FS 0xFFFFFFFFULL
  29
  30 u32 fsl_ddr_get_version(unsigned int ctrl_num)
  31 {
  32         struct ccsr_ddr __iomem *ddr;
  33         u32 ver_major_minor_errata;
  34
  35         switch (ctrl_num) {
  36         case 0:
  37                 ddr = (void *)CFG_SYS_FSL_DDR_ADDR;
  38                 break;
  39 #if defined(CFG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
  40         case 1:
  41                 ddr = (void *)CFG_SYS_FSL_DDR2_ADDR;
  42                 break;
  43 #endif
  44 #if defined(CFG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
  45         case 2:
  46                 ddr = (void *)CFG_SYS_FSL_DDR3_ADDR;
  47                 break;
  48 #endif
  49 #if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
  50         case 3:
  51                 ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
  52                 break;
  53 #endif
  54         default:
  55                 printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num);
  56                 return 0;
  57         }
  58         ver_major_minor_errata = (ddr_in32(&ddr->ip_rev1) & 0xFFFF) << 8;
  59         ver_major_minor_errata |= (ddr_in32(&ddr->ip_rev2) & 0xFF00) >> 8;
  60
  61         return ver_major_minor_errata;
  62 }
  63
  64 /*
  65  * Round up mclk_ps to nearest 1 ps in memory controller code
  66  * if the error is 0.5ps or more.
  67  *
  68  * If an imprecise data rate is too high due to rounding error
  69  * propagation, compute a suitably rounded mclk_ps to compute
  70  * a working memory controller configuration.
  71  */
  72 unsigned int get_memory_clk_period_ps(const unsigned int ctrl_num)
  73 {
  74         unsigned int data_rate = get_ddr_freq(ctrl_num);
  75         unsigned int result;
  76
  77         /* Round to nearest 10ps, being careful about 64-bit multiply/divide */
  78         unsigned long long rem, mclk_ps = ULL_2E12;
  79         if (data_rate) {
  80                 /* Now perform the big divide, the result fits in 32-bits */
  81                 rem = do_div(mclk_ps, data_rate);
  82                 result = (rem >= (data_rate >> 1)) ? mclk_ps + 1 : mclk_ps;
  83         } else {
  84                 result = 0;
  85         }
  86
  87         return result;
  88 }
  89
  90 /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
  91 unsigned int picos_to_mclk(const unsigned int ctrl_num, unsigned int picos)
  92 {
  93         unsigned long long clks, clks_rem;
  94         unsigned long data_rate = get_ddr_freq(ctrl_num);
  95
  96         /* Short circuit for zero picos */
  97         if (!picos)
  98                 return 0;
  99
 100         /* First multiply the time by the data rate (32x32 => 64) */
 101         clks = picos * (unsigned long long)data_rate;
 102         /*
 103          * Now divide by 5^12 and track the 32-bit remainder, then divide
 104          * by 2*(2^12) using shifts (and updating the remainder).
 105          */
 106         clks_rem = do_div(clks, UL_5POW12);
 107         clks_rem += (clks & (UL_2POW13-1)) * UL_5POW12;
 108         clks >>= 13;
 109
 110         /* If we had a remainder greater than the 1ps error, then round up */
 111         if (clks_rem > data_rate)
 112                 clks++;
 113
 114         /* Clamp to the maximum representable value */
 115         if (clks > ULL_8FS)
 116                 clks = ULL_8FS;
 117         return (unsigned int) clks;
 118 }
 119
 120 unsigned int mclk_to_picos(const unsigned int ctrl_num, unsigned int mclk)
 121 {
 122         return get_memory_clk_period_ps(ctrl_num) * mclk;
 123 }
 124
 125 #ifdef CONFIG_PPC
 126 void
 127 __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 128                            unsigned int law_memctl,
 129                            unsigned int ctrl_num)
 130 {
 131         unsigned long long base = memctl_common_params->base_address;
 132         unsigned long long size = memctl_common_params->total_mem;
 133
 134         /*
 135          * If no DIMMs on this controller, do not proceed any further.
 136          */
 137         if (!memctl_common_params->ndimms_present) {
 138                 return;
 139         }
 140
 141 #if !defined(CONFIG_PHYS_64BIT)
 142         if (base >= CONFIG_MAX_MEM_MAPPED)
 143                 return;
 144         if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
 145                 size = CONFIG_MAX_MEM_MAPPED - base;
 146 #endif
 147         if (set_ddr_laws(base, size, law_memctl) < 0) {
 148                 printf("%s: ERROR (ctrl #%d, TRGT ID=%x)\n", __func__, ctrl_num,
 149                         law_memctl);
 150                 return;
 151         }
 152         debug("setup ddr law base = 0x%llx, size 0x%llx, TRGT_ID 0x%x\n",
 153                 base, size, law_memctl);
 154 }
 155
 156 __attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
 157 fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
 158                          unsigned int memctl_interleaved,
 159                          unsigned int ctrl_num);
 160 #endif
 161
 162 void fsl_ddr_set_intl3r(const unsigned int granule_size)
 163 {
 164 #ifdef CONFIG_E6500
 165         u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 166         *mcintl3r = 0x80000000 | (granule_size & 0x1f);
 167         debug("Enable MCINTL3R with granule size 0x%x\n", granule_size);
 168 #endif
 169 }
 170
 171 u32 fsl_ddr_get_intl3r(void)
 172 {
 173         u32 val = 0;
 174 #ifdef CONFIG_E6500
 175         u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 176         val = *mcintl3r;
 177 #endif
 178         return val;
 179 }
 180
 181 void print_ddr_info(unsigned int start_ctrl)
 182 {
 183         struct ccsr_ddr __iomem *ddr =
 184                 (struct ccsr_ddr __iomem *)(CFG_SYS_FSL_DDR_ADDR);
 185
 186 #if     defined(CONFIG_E6500) && (CONFIG_SYS_NUM_DDR_CTLRS == 3)
 187         u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 188 #endif
 189 #if (CONFIG_SYS_NUM_DDR_CTLRS > 1)
 190         uint32_t cs0_config = ddr_in32(&ddr->cs0_config);
 191 #endif
 192         uint32_t sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 193         int cas_lat;
 194
 195 #if CONFIG_SYS_NUM_DDR_CTLRS >= 2
 196         if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) ||
 197             (start_ctrl == 1)) {
 198                 ddr = (void __iomem *)CFG_SYS_FSL_DDR2_ADDR;
 199                 sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 200         }
 201 #endif
 202 #if CONFIG_SYS_NUM_DDR_CTLRS >= 3
 203         if ((!(sdram_cfg & SDRAM_CFG_MEM_EN)) ||
 204             (start_ctrl == 2)) {
 205                 ddr = (void __iomem *)CFG_SYS_FSL_DDR3_ADDR;
 206                 sdram_cfg = ddr_in32(&ddr->sdram_cfg);
 207         }
 208 #endif
 209
 210         if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
 211                 puts(" (DDR not enabled)\n");
 212                 return;
 213         }
 214
 215         puts(" (DDR");
 216         switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
 217                 SDRAM_CFG_SDRAM_TYPE_SHIFT) {
 218         case SDRAM_TYPE_DDR1:
 219                 puts("1");
 220                 break;
 221         case SDRAM_TYPE_DDR2:
 222                 puts("2");
 223                 break;
 224         case SDRAM_TYPE_DDR3:
 225                 puts("3");
 226                 break;
 227         case SDRAM_TYPE_DDR4:
 228                 puts("4");
 229                 break;
 230         default:
 231                 puts("?");
 232                 break;
 233         }
 234
 235         if (sdram_cfg & SDRAM_CFG_32_BE)
 236                 puts(", 32-bit");
 237         else if (sdram_cfg & SDRAM_CFG_16_BE)
 238                 puts(", 16-bit");
 239         else
 240                 puts(", 64-bit");
 241
 242         /* Calculate CAS latency based on timing cfg values */
 243         cas_lat = ((ddr_in32(&ddr->timing_cfg_1) >> 16) & 0xf);
 244         if (fsl_ddr_get_version(0) <= 0x40400)
 245                 cas_lat += 1;
 246         else
 247                 cas_lat += 2;
 248         cas_lat += ((ddr_in32(&ddr->timing_cfg_3) >> 12) & 3) << 4;
 249         printf(", CL=%d", cas_lat >> 1);
 250         if (cas_lat & 0x1)
 251                 puts(".5");
 252
 253         if (sdram_cfg & SDRAM_CFG_ECC_EN)
 254                 puts(", ECC on)");
 255         else
 256                 puts(", ECC off)");
 257
 258 #if (CONFIG_SYS_NUM_DDR_CTLRS == 3)
 259 #ifdef CONFIG_E6500
 260         if (*mcintl3r & 0x80000000) {
 261                 puts("\n");
 262                 puts("       DDR Controller Interleaving Mode: ");
 263                 switch (*mcintl3r & 0x1f) {
 264                 case FSL_DDR_3WAY_1KB_INTERLEAVING:
 265                         puts("3-way 1KB");
 266                         break;
 267                 case FSL_DDR_3WAY_4KB_INTERLEAVING:
 268                         puts("3-way 4KB");
 269                         break;
 270                 case FSL_DDR_3WAY_8KB_INTERLEAVING:
 271                         puts("3-way 8KB");
 272                         break;
 273                 default:
 274                         puts("3-way UNKNOWN");
 275                         break;
 276                 }
 277         }
 278 #endif
 279 #endif
 280 #if (CONFIG_SYS_NUM_DDR_CTLRS >= 2)
 281         if ((cs0_config & 0x20000000) && (start_ctrl == 0)) {
 282                 puts("\n");
 283                 puts("       DDR Controller Interleaving Mode: ");
 284
 285                 switch ((cs0_config >> 24) & 0xf) {
 286                 case FSL_DDR_256B_INTERLEAVING:
 287                         puts("256B");
 288                         break;
 289                 case FSL_DDR_CACHE_LINE_INTERLEAVING:
 290                         puts("cache line");
 291                         break;
 292                 case FSL_DDR_PAGE_INTERLEAVING:
 293                         puts("page");
 294                         break;
 295                 case FSL_DDR_BANK_INTERLEAVING:
 296                         puts("bank");
 297                         break;
 298                 case FSL_DDR_SUPERBANK_INTERLEAVING:
 299                         puts("super-bank");
 300                         break;
 301                 default:
 302                         puts("invalid");
 303                         break;
 304                 }
 305         }
 306 #endif
 307
 308         if ((sdram_cfg >> 8) & 0x7f) {
 309                 puts("\n");
 310                 puts("       DDR Chip-Select Interleaving Mode: ");
 311                 switch(sdram_cfg >> 8 & 0x7f) {
 312                 case FSL_DDR_CS0_CS1_CS2_CS3:
 313                         puts("CS0+CS1+CS2+CS3");
 314                         break;
 315                 case FSL_DDR_CS0_CS1:
 316                         puts("CS0+CS1");
 317                         break;
 318                 case FSL_DDR_CS2_CS3:
 319                         puts("CS2+CS3");
 320                         break;
 321                 case FSL_DDR_CS0_CS1_AND_CS2_CS3:
 322                         puts("CS0+CS1 and CS2+CS3");
 323                         break;
 324                 default:
 325                         puts("invalid");
 326                         break;
 327                 }
 328         }
 329 }
 330
 331 void __weak detail_board_ddr_info(void)
 332 {
 333         print_ddr_info(0);
 334 }
 335
 336 void board_add_ram_info(int use_default)
 337 {
 338         detail_board_ddr_info();
 339 }
 340
 341 #ifdef CONFIG_FSL_DDR_SYNC_REFRESH
 342 #define DDRC_DEBUG20_INIT_DONE  0x80000000
 343 #define DDRC_DEBUG2_RF          0x00000040
 344 void fsl_ddr_sync_memctl_refresh(unsigned int first_ctrl,
 345                                  unsigned int last_ctrl)
 346 {
 347         unsigned int i;
 348         u32 ddrc_debug20;
 349         u32 ddrc_debug2[CONFIG_SYS_NUM_DDR_CTLRS] = {};
 350         u32 *ddrc_debug2_p[CONFIG_SYS_NUM_DDR_CTLRS] = {};
 351         struct ccsr_ddr __iomem *ddr;
 352
 353         for (i = first_ctrl; i <= last_ctrl; i++) {
 354                 switch (i) {
 355                 case 0:
 356                         ddr = (void *)CFG_SYS_FSL_DDR_ADDR;
 357                         break;
 358 #if defined(CFG_SYS_FSL_DDR2_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 1)
 359                 case 1:
 360                         ddr = (void *)CFG_SYS_FSL_DDR2_ADDR;
 361                         break;
 362 #endif
 363 #if defined(CFG_SYS_FSL_DDR3_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 2)
 364                 case 2:
 365                         ddr = (void *)CFG_SYS_FSL_DDR3_ADDR;
 366                         break;
 367 #endif
 368 #if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_SYS_NUM_DDR_CTLRS > 3)
 369                 case 3:
 370                         ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
 371                         break;
 372 #endif
 373                 default:
 374                         printf("%s unexpected ctrl = %u\n", __func__, i);
 375                         return;
 376                 }
 377                 ddrc_debug20 = ddr_in32(&ddr->debug[19]);
 378                 ddrc_debug2_p[i] = &ddr->debug[1];
 379                 while (!(ddrc_debug20 & DDRC_DEBUG20_INIT_DONE)) {
 380                         /* keep polling until DDRC init is done */
 381                         udelay(100);
 382                         ddrc_debug20 = ddr_in32(&ddr->debug[19]);
 383                 }
 384                 ddrc_debug2[i] = ddr_in32(&ddr->debug[1]) | DDRC_DEBUG2_RF;
 385         }
 386         /*
 387          * Sync refresh
 388          * This is put together to make sure the refresh reqeusts are sent
 389          * closely to each other.
 390          */
 391         for (i = first_ctrl; i <= last_ctrl; i++)
 392                 ddr_out32(ddrc_debug2_p[i], ddrc_debug2[i]);
 393 }
 394 #endif /* CONFIG_FSL_DDR_SYNC_REFRESH */
 395
 396 void remove_unused_controllers(fsl_ddr_info_t *info)
 397 {
 398 #ifdef CONFIG_SYS_FSL_HAS_CCN504
 399         int i;
 400         u64 nodeid;
 401         void *hnf_sam_ctrl = (void *)(CCI_HN_F_0_BASE + CCN_HN_F_SAM_CTL);
 402         bool ddr0_used = false;
 403         bool ddr1_used = false;
 404
 405         for (i = 0; i < 8; i++) {
 406                 nodeid = in_le64(hnf_sam_ctrl) & CCN_HN_F_SAM_NODEID_MASK;
 407                 if (nodeid == CCN_HN_F_SAM_NODEID_DDR0) {
 408                         ddr0_used = true;
 409                 } else if (nodeid == CCN_HN_F_SAM_NODEID_DDR1) {
 410                         ddr1_used = true;
 411                 } else {
 412                         printf("Unknown nodeid in HN-F SAM control: 0x%llx\n",
 413                                nodeid);
 414                 }
 415                 hnf_sam_ctrl += (CCI_HN_F_1_BASE - CCI_HN_F_0_BASE);
 416         }
 417         if (!ddr0_used && !ddr1_used) {
 418                 printf("Invalid configuration in HN-F SAM control\n");
 419                 return;
 420         }
 421
 422         if (!ddr0_used && info->first_ctrl == 0) {
 423                 info->first_ctrl = 1;
 424                 info->num_ctrls = 1;
 425                 debug("First DDR controller disabled\n");
 426                 return;
 427         }
 428
 429         if (!ddr1_used && info->first_ctrl + info->num_ctrls > 1) {
 430                 info->num_ctrls = 1;
 431                 debug("Second DDR controller disabled\n");
 432         }
 433 #endif
 434 }