drivers/ddr/fsl/main.c

   1 /*
   2  * Copyright 2008-2012 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * Version 2 as published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
  11  * Based on code from spd_sdram.c
  12  * Author: James Yang [at freescale.com]
  13  */
  14
  15 #include <common.h>
  16 #include <i2c.h>
  17 #include <fsl_ddr_sdram.h>
  18 #include <fsl_ddr.h>
  19
  20 /*
  21  * CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY is the physical address from the view
  22  * of DDR controllers. It is the same as CONFIG_SYS_DDR_SDRAM_BASE for
  23  * all Power SoCs. But it could be different for ARM SoCs. For example,
  24  * fsl_lsch3 has a mapping mechanism to map DDR memory to ranges (in order) of
  25  * 0x00_8000_0000 ~ 0x00_ffff_ffff
  26  * 0x80_8000_0000 ~ 0xff_ffff_ffff
  27  */
  28 #ifndef CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY
  29 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY CONFIG_SYS_DDR_SDRAM_BASE
  30 #endif
  31
  32 #ifdef CONFIG_PPC
  33 #include <asm/fsl_law.h>
  34
  35 void fsl_ddr_set_lawbar(
  36                 const common_timing_params_t *memctl_common_params,
  37                 unsigned int memctl_interleaved,
  38                 unsigned int ctrl_num);
  39 #endif
  40
  41 void fsl_ddr_set_intl3r(const unsigned int granule_size);
  42 #if defined(SPD_EEPROM_ADDRESS) || \
  43     defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \
  44     defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4)
  45 #if (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
  46 u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
  47         [0][0] = SPD_EEPROM_ADDRESS,
  48 };
  49 #elif (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
  50 u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
  51         [0][0] = SPD_EEPROM_ADDRESS1,   /* controller 1 */
  52         [0][1] = SPD_EEPROM_ADDRESS2,   /* controller 1 */
  53 };
  54 #elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
  55 u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
  56         [0][0] = SPD_EEPROM_ADDRESS1,   /* controller 1 */
  57         [1][0] = SPD_EEPROM_ADDRESS2,   /* controller 2 */
  58 };
  59 #elif (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
  60 u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
  61         [0][0] = SPD_EEPROM_ADDRESS1,   /* controller 1 */
  62         [0][1] = SPD_EEPROM_ADDRESS2,   /* controller 1 */
  63         [1][0] = SPD_EEPROM_ADDRESS3,   /* controller 2 */
  64         [1][1] = SPD_EEPROM_ADDRESS4,   /* controller 2 */
  65 };
  66 #elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
  67 u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
  68         [0][0] = SPD_EEPROM_ADDRESS1,   /* controller 1 */
  69         [1][0] = SPD_EEPROM_ADDRESS2,   /* controller 2 */
  70         [2][0] = SPD_EEPROM_ADDRESS3,   /* controller 3 */
  71 };
  72 #elif (CONFIG_NUM_DDR_CONTROLLERS == 3) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
  73 u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
  74         [0][0] = SPD_EEPROM_ADDRESS1,   /* controller 1 */
  75         [0][1] = SPD_EEPROM_ADDRESS2,   /* controller 1 */
  76         [1][0] = SPD_EEPROM_ADDRESS3,   /* controller 2 */
  77         [1][1] = SPD_EEPROM_ADDRESS4,   /* controller 2 */
  78         [2][0] = SPD_EEPROM_ADDRESS5,   /* controller 3 */
  79         [2][1] = SPD_EEPROM_ADDRESS6,   /* controller 3 */
  80 };
  81
  82 #endif
  83
  84 static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
  85 {
  86         int ret;
  87
  88         i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
  89
  90         ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
  91                                 sizeof(generic_spd_eeprom_t));
  92
  93         if (ret) {
  94                 if (i2c_address ==
  95 #ifdef SPD_EEPROM_ADDRESS
  96                                 SPD_EEPROM_ADDRESS
  97 #elif defined(SPD_EEPROM_ADDRESS1)
  98                                 SPD_EEPROM_ADDRESS1
  99 #endif
 100                                 ) {
 101                         printf("DDR: failed to read SPD from address %u\n",
 102                                 i2c_address);
 103                 } else {
 104                         debug("DDR: failed to read SPD from address %u\n",
 105                                 i2c_address);
 106                 }
 107                 memset(spd, 0, sizeof(generic_spd_eeprom_t));
 108         }
 109 }
 110
 111 __attribute__((weak, alias("__get_spd")))
 112 void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address);
 113
 114 void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
 115                       unsigned int ctrl_num)
 116 {
 117         unsigned int i;
 118         unsigned int i2c_address = 0;
 119
 120         if (ctrl_num >= CONFIG_NUM_DDR_CONTROLLERS) {
 121                 printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
 122                 return;
 123         }
 124
 125         for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
 126                 i2c_address = spd_i2c_addr[ctrl_num][i];
 127                 get_spd(&(ctrl_dimms_spd[i]), i2c_address);
 128         }
 129 }
 130 #else
 131 void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
 132                       unsigned int ctrl_num)
 133 {
 134 }
 135 #endif /* SPD_EEPROM_ADDRESSx */
 136
 137 /*
 138  * ASSUMPTIONS:
 139  *    - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller
 140  *    - Same memory data bus width on all controllers
 141  *
 142  * NOTES:
 143  *
 144  * The memory controller and associated documentation use confusing
 145  * terminology when referring to the orgranization of DRAM.
 146  *
 147  * Here is a terminology translation table:
 148  *
 149  * memory controller/documention  |industry   |this code  |signals
 150  * -------------------------------|-----------|-----------|-----------------
 151  * physical bank/bank             |rank       |rank       |chip select (CS)
 152  * logical bank/sub-bank          |bank       |bank       |bank address (BA)
 153  * page/row                       |row        |page       |row address
 154  * ???                            |column     |column     |column address
 155  *
 156  * The naming confusion is further exacerbated by the descriptions of the
 157  * memory controller interleaving feature, where accesses are interleaved
 158  * _BETWEEN_ two seperate memory controllers.  This is configured only in
 159  * CS0_CONFIG[INTLV_CTL] of each memory controller.
 160  *
 161  * memory controller documentation | number of chip selects
 162  *                                 | per memory controller supported
 163  * --------------------------------|-----------------------------------------
 164  * cache line interleaving         | 1 (CS0 only)
 165  * page interleaving               | 1 (CS0 only)
 166  * bank interleaving               | 1 (CS0 only)
 167  * superbank interleraving         | depends on bank (chip select)
 168  *                                 |   interleraving [rank interleaving]
 169  *                                 |   mode used on every memory controller
 170  *
 171  * Even further confusing is the existence of the interleaving feature
 172  * _WITHIN_ each memory controller.  The feature is referred to in
 173  * documentation as chip select interleaving or bank interleaving,
 174  * although it is configured in the DDR_SDRAM_CFG field.
 175  *
 176  * Name of field                | documentation name    | this code
 177  * -----------------------------|-----------------------|------------------
 178  * DDR_SDRAM_CFG[BA_INTLV_CTL]  | Bank (chip select)    | rank interleaving
 179  *                              |  interleaving
 180  */
 181
 182 const char *step_string_tbl[] = {
 183         "STEP_GET_SPD",
 184         "STEP_COMPUTE_DIMM_PARMS",
 185         "STEP_COMPUTE_COMMON_PARMS",
 186         "STEP_GATHER_OPTS",
 187         "STEP_ASSIGN_ADDRESSES",
 188         "STEP_COMPUTE_REGS",
 189         "STEP_PROGRAM_REGS",
 190         "STEP_ALL"
 191 };
 192
 193 const char * step_to_string(unsigned int step) {
 194
 195         unsigned int s = __ilog2(step);
 196
 197         if ((1 << s) != step)
 198                 return step_string_tbl[7];
 199
 200         return step_string_tbl[s];
 201 }
 202
 203 static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
 204                           unsigned int dbw_cap_adj[])
 205 {
 206         int i, j;
 207         unsigned long long total_mem, current_mem_base, total_ctlr_mem;
 208         unsigned long long rank_density, ctlr_density = 0;
 209
 210         /*
 211          * If a reduced data width is requested, but the SPD
 212          * specifies a physically wider device, adjust the
 213          * computed dimm capacities accordingly before
 214          * assigning addresses.
 215          */
 216         for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 217                 unsigned int found = 0;
 218
 219                 switch (pinfo->memctl_opts[i].data_bus_width) {
 220                 case 2:
 221                         /* 16-bit */
 222                         for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
 223                                 unsigned int dw;
 224                                 if (!pinfo->dimm_params[i][j].n_ranks)
 225                                         continue;
 226                                 dw = pinfo->dimm_params[i][j].primary_sdram_width;
 227                                 if ((dw == 72 || dw == 64)) {
 228                                         dbw_cap_adj[i] = 2;
 229                                         break;
 230                                 } else if ((dw == 40 || dw == 32)) {
 231                                         dbw_cap_adj[i] = 1;
 232                                         break;
 233                                 }
 234                         }
 235                         break;
 236
 237                 case 1:
 238                         /* 32-bit */
 239                         for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
 240                                 unsigned int dw;
 241                                 dw = pinfo->dimm_params[i][j].data_width;
 242                                 if (pinfo->dimm_params[i][j].n_ranks
 243                                     && (dw == 72 || dw == 64)) {
 244                                         /*
 245                                          * FIXME: can't really do it
 246                                          * like this because this just
 247                                          * further reduces the memory
 248                                          */
 249                                         found = 1;
 250                                         break;
 251                                 }
 252                         }
 253                         if (found) {
 254                                 dbw_cap_adj[i] = 1;
 255                         }
 256                         break;
 257
 258                 case 0:
 259                         /* 64-bit */
 260                         break;
 261
 262                 default:
 263                         printf("unexpected data bus width "
 264                                 "specified controller %u\n", i);
 265                         return 1;
 266                 }
 267                 debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]);
 268         }
 269
 270         current_mem_base = CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY;
 271         total_mem = 0;
 272         if (pinfo->memctl_opts[0].memctl_interleaving) {
 273                 rank_density = pinfo->dimm_params[0][0].rank_density >>
 274                                         dbw_cap_adj[0];
 275                 switch (pinfo->memctl_opts[0].ba_intlv_ctl &
 276                                         FSL_DDR_CS0_CS1_CS2_CS3) {
 277                 case FSL_DDR_CS0_CS1_CS2_CS3:
 278                         ctlr_density = 4 * rank_density;
 279                         break;
 280                 case FSL_DDR_CS0_CS1:
 281                 case FSL_DDR_CS0_CS1_AND_CS2_CS3:
 282                         ctlr_density = 2 * rank_density;
 283                         break;
 284                 case FSL_DDR_CS2_CS3:
 285                 default:
 286                         ctlr_density = rank_density;
 287                         break;
 288                 }
 289                 debug("rank density is 0x%llx, ctlr density is 0x%llx\n",
 290                         rank_density, ctlr_density);
 291                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 292                         if (pinfo->memctl_opts[i].memctl_interleaving) {
 293                                 switch (pinfo->memctl_opts[i].memctl_interleaving_mode) {
 294                                 case FSL_DDR_CACHE_LINE_INTERLEAVING:
 295                                 case FSL_DDR_PAGE_INTERLEAVING:
 296                                 case FSL_DDR_BANK_INTERLEAVING:
 297                                 case FSL_DDR_SUPERBANK_INTERLEAVING:
 298                                         total_ctlr_mem = 2 * ctlr_density;
 299                                         break;
 300                                 case FSL_DDR_3WAY_1KB_INTERLEAVING:
 301                                 case FSL_DDR_3WAY_4KB_INTERLEAVING:
 302                                 case FSL_DDR_3WAY_8KB_INTERLEAVING:
 303                                         total_ctlr_mem = 3 * ctlr_density;
 304                                         break;
 305                                 case FSL_DDR_4WAY_1KB_INTERLEAVING:
 306                                 case FSL_DDR_4WAY_4KB_INTERLEAVING:
 307                                 case FSL_DDR_4WAY_8KB_INTERLEAVING:
 308                                         total_ctlr_mem = 4 * ctlr_density;
 309                                         break;
 310                                 default:
 311                                         panic("Unknown interleaving mode");
 312                                 }
 313                                 pinfo->common_timing_params[i].base_address =
 314                                                         current_mem_base;
 315                                 pinfo->common_timing_params[i].total_mem =
 316                                                         total_ctlr_mem;
 317                                 total_mem = current_mem_base + total_ctlr_mem;
 318                                 debug("ctrl %d base 0x%llx\n", i, current_mem_base);
 319                                 debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
 320                         } else {
 321                                 /* when 3rd controller not interleaved */
 322                                 current_mem_base = total_mem;
 323                                 total_ctlr_mem = 0;
 324                                 pinfo->common_timing_params[i].base_address =
 325                                                         current_mem_base;
 326                                 for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
 327                                         unsigned long long cap =
 328                                                 pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i];
 329                                         pinfo->dimm_params[i][j].base_address =
 330                                                 current_mem_base;
 331                                         debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base);
 332                                         current_mem_base += cap;
 333                                         total_ctlr_mem += cap;
 334                                 }
 335                                 debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
 336                                 pinfo->common_timing_params[i].total_mem =
 337                                                         total_ctlr_mem;
 338                                 total_mem += total_ctlr_mem;
 339                         }
 340                 }
 341         } else {
 342                 /*
 343                  * Simple linear assignment if memory
 344                  * controllers are not interleaved.
 345                  */
 346                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 347                         total_ctlr_mem = 0;
 348                         pinfo->common_timing_params[i].base_address =
 349                                                 current_mem_base;
 350                         for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
 351                                 /* Compute DIMM base addresses. */
 352                                 unsigned long long cap =
 353                                         pinfo->dimm_params[i][j].capacity >> dbw_cap_adj[i];
 354                                 pinfo->dimm_params[i][j].base_address =
 355                                         current_mem_base;
 356                                 debug("ctrl %d dimm %d base 0x%llx\n", i, j, current_mem_base);
 357                                 current_mem_base += cap;
 358                                 total_ctlr_mem += cap;
 359                         }
 360                         debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
 361                         pinfo->common_timing_params[i].total_mem =
 362                                                         total_ctlr_mem;
 363                         total_mem += total_ctlr_mem;
 364                 }
 365         }
 366         debug("Total mem by %s is 0x%llx\n", __func__, total_mem);
 367
 368         return total_mem;
 369 }
 370
 371 /* Use weak function to allow board file to override the address assignment */
 372 __attribute__((weak, alias("__step_assign_addresses")))
 373 unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
 374                           unsigned int dbw_cap_adj[]);
 375
 376 unsigned long long
 377 fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
 378                                        unsigned int size_only)
 379 {
 380         unsigned int i, j;
 381         unsigned long long total_mem = 0;
 382         int assert_reset;
 383
 384         fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg;
 385         common_timing_params_t *timing_params = pinfo->common_timing_params;
 386         assert_reset = board_need_mem_reset();
 387
 388         /* data bus width capacity adjust shift amount */
 389         unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS];
 390
 391         for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 392                 dbw_capacity_adjust[i] = 0;
 393         }
 394
 395         debug("starting at step %u (%s)\n",
 396               start_step, step_to_string(start_step));
 397
 398         switch (start_step) {
 399         case STEP_GET_SPD:
 400 #if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM)
 401                 /* STEP 1:  Gather all DIMM SPD data */
 402                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 403                         fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i);
 404                 }
 405
 406         case STEP_COMPUTE_DIMM_PARMS:
 407                 /* STEP 2:  Compute DIMM parameters from SPD data */
 408
 409                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 410                         for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
 411                                 unsigned int retval;
 412                                 generic_spd_eeprom_t *spd =
 413                                         &(pinfo->spd_installed_dimms[i][j]);
 414                                 dimm_params_t *pdimm =
 415                                         &(pinfo->dimm_params[i][j]);
 416
 417                                 retval = compute_dimm_parameters(spd, pdimm, i);
 418 #ifdef CONFIG_SYS_DDR_RAW_TIMING
 419                                 if (!i && !j && retval) {
 420                                         printf("SPD error on controller %d! "
 421                                         "Trying fallback to raw timing "
 422                                         "calculation\n", i);
 423                                         fsl_ddr_get_dimm_params(pdimm, i, j);
 424                                 }
 425 #else
 426                                 if (retval == 2) {
 427                                         printf("Error: compute_dimm_parameters"
 428                                         " non-zero returned FATAL value "
 429                                         "for memctl=%u dimm=%u\n", i, j);
 430                                         return 0;
 431                                 }
 432 #endif
 433                                 if (retval) {
 434                                         debug("Warning: compute_dimm_parameters"
 435                                         " non-zero return value for memctl=%u "
 436                                         "dimm=%u\n", i, j);
 437                                 }
 438                         }
 439                 }
 440
 441 #elif defined(CONFIG_SYS_DDR_RAW_TIMING)
 442         case STEP_COMPUTE_DIMM_PARMS:
 443                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 444                         for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
 445                                 dimm_params_t *pdimm =
 446                                         &(pinfo->dimm_params[i][j]);
 447                                 fsl_ddr_get_dimm_params(pdimm, i, j);
 448                         }
 449                 }
 450                 debug("Filling dimm parameters from board specific file\n");
 451 #endif
 452         case STEP_COMPUTE_COMMON_PARMS:
 453                 /*
 454                  * STEP 3: Compute a common set of timing parameters
 455                  * suitable for all of the DIMMs on each memory controller
 456                  */
 457                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 458                         debug("Computing lowest common DIMM"
 459                                 " parameters for memctl=%u\n", i);
 460                         compute_lowest_common_dimm_parameters(
 461                                 pinfo->dimm_params[i],
 462                                 &timing_params[i],
 463                                 CONFIG_DIMM_SLOTS_PER_CTLR);
 464                 }
 465
 466         case STEP_GATHER_OPTS:
 467                 /* STEP 4:  Gather configuration requirements from user */
 468                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 469                         debug("Reloading memory controller "
 470                                 "configuration options for memctl=%u\n", i);
 471                         /*
 472                          * This "reloads" the memory controller options
 473                          * to defaults.  If the user "edits" an option,
 474                          * next_step points to the step after this,
 475                          * which is currently STEP_ASSIGN_ADDRESSES.
 476                          */
 477                         populate_memctl_options(
 478                                         timing_params[i].all_dimms_registered,
 479                                         &pinfo->memctl_opts[i],
 480                                         pinfo->dimm_params[i], i);
 481                         /*
 482                          * For RDIMMs, JEDEC spec requires clocks to be stable
 483                          * before reset signal is deasserted. For the boards
 484                          * using fixed parameters, this function should be
 485                          * be called from board init file.
 486                          */
 487                         if (timing_params[i].all_dimms_registered)
 488                                 assert_reset = 1;
 489                 }
 490                 if (assert_reset) {
 491                         debug("Asserting mem reset\n");
 492                         board_assert_mem_reset();
 493                 }
 494
 495         case STEP_ASSIGN_ADDRESSES:
 496                 /* STEP 5:  Assign addresses to chip selects */
 497                 check_interleaving_options(pinfo);
 498                 total_mem = step_assign_addresses(pinfo, dbw_capacity_adjust);
 499
 500         case STEP_COMPUTE_REGS:
 501                 /* STEP 6:  compute controller register values */
 502                 debug("FSL Memory ctrl register computation\n");
 503                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 504                         if (timing_params[i].ndimms_present == 0) {
 505                                 memset(&ddr_reg[i], 0,
 506                                         sizeof(fsl_ddr_cfg_regs_t));
 507                                 continue;
 508                         }
 509
 510                         compute_fsl_memctl_config_regs(
 511                                         &pinfo->memctl_opts[i],
 512                                         &ddr_reg[i], &timing_params[i],
 513                                         pinfo->dimm_params[i],
 514                                         dbw_capacity_adjust[i],
 515                                         size_only);
 516                 }
 517
 518         default:
 519                 break;
 520         }
 521
 522         {
 523                 /*
 524                  * Compute the amount of memory available just by
 525                  * looking for the highest valid CSn_BNDS value.
 526                  * This allows us to also experiment with using
 527                  * only CS0 when using dual-rank DIMMs.
 528                  */
 529                 unsigned int max_end = 0;
 530
 531                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 532                         for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) {
 533                                 fsl_ddr_cfg_regs_t *reg = &ddr_reg[i];
 534                                 if (reg->cs[j].config & 0x80000000) {
 535                                         unsigned int end;
 536                                         /*
 537                                          * 0xfffffff is a special value we put
 538                                          * for unused bnds
 539                                          */
 540                                         if (reg->cs[j].bnds == 0xffffffff)
 541                                                 continue;
 542                                         end = reg->cs[j].bnds & 0xffff;
 543                                         if (end > max_end) {
 544                                                 max_end = end;
 545                                         }
 546                                 }
 547                         }
 548                 }
 549
 550                 total_mem = 1 + (((unsigned long long)max_end << 24ULL) |
 551                             0xFFFFFFULL) - CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY;
 552         }
 553
 554         return total_mem;
 555 }
 556
 557 /*
 558  * fsl_ddr_sdram() -- this is the main function to be called by
 559  *      initdram() in the board file.
 560  *
 561  * It returns amount of memory configured in bytes.
 562  */
 563 phys_size_t fsl_ddr_sdram(void)
 564 {
 565         unsigned int i;
 566 #ifdef CONFIG_PPC
 567         unsigned int law_memctl = LAW_TRGT_IF_DDR_1;
 568 #endif
 569         unsigned long long total_memory;
 570         fsl_ddr_info_t info;
 571         int deassert_reset;
 572
 573         /* Reset info structure. */
 574         memset(&info, 0, sizeof(fsl_ddr_info_t));
 575
 576         /* Compute it once normally. */
 577 #ifdef CONFIG_FSL_DDR_INTERACTIVE
 578         if (tstc() && (getc() == 'd')) {        /* we got a key press of 'd' */
 579                 total_memory = fsl_ddr_interactive(&info, 0);
 580         } else if (fsl_ddr_interactive_env_var_exists()) {
 581                 total_memory = fsl_ddr_interactive(&info, 1);
 582         } else
 583 #endif
 584                 total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
 585
 586         /* setup 3-way interleaving before enabling DDRC */
 587         if (info.memctl_opts[0].memctl_interleaving) {
 588                 switch (info.memctl_opts[0].memctl_interleaving_mode) {
 589                 case FSL_DDR_3WAY_1KB_INTERLEAVING:
 590                 case FSL_DDR_3WAY_4KB_INTERLEAVING:
 591                 case FSL_DDR_3WAY_8KB_INTERLEAVING:
 592                         fsl_ddr_set_intl3r(
 593                                 info.memctl_opts[0].memctl_interleaving_mode);
 594                         break;
 595                 default:
 596                         break;
 597                 }
 598         }
 599
 600         /*
 601          * Program configuration registers.
 602          * JEDEC specs requires clocks to be stable before deasserting reset
 603          * for RDIMMs. Clocks start after chip select is enabled and clock
 604          * control register is set. During step 1, all controllers have their
 605          * registers set but not enabled. Step 2 proceeds after deasserting
 606          * reset through board FPGA or GPIO.
 607          * For non-registered DIMMs, initialization can go through but it is
 608          * also OK to follow the same flow.
 609          */
 610         deassert_reset = board_need_mem_reset();
 611         for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 612                 if (info.common_timing_params[i].all_dimms_registered)
 613                         deassert_reset = 1;
 614         }
 615         for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 616                 debug("Programming controller %u\n", i);
 617                 if (info.common_timing_params[i].ndimms_present == 0) {
 618                         debug("No dimms present on controller %u; "
 619                                         "skipping programming\n", i);
 620                         continue;
 621                 }
 622                 /*
 623                  * The following call with step = 1 returns before enabling
 624                  * the controller. It has to finish with step = 2 later.
 625                  */
 626                 fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i,
 627                                         deassert_reset ? 1 : 0);
 628         }
 629         if (deassert_reset) {
 630                 /* Use board FPGA or GPIO to deassert reset signal */
 631                 debug("Deasserting mem reset\n");
 632                 board_deassert_mem_reset();
 633                 for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 634                         /* Call with step = 2 to continue initialization */
 635                         fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]),
 636                                                 i, 2);
 637                 }
 638         }
 639
 640 #ifdef CONFIG_PPC
 641         /* program LAWs */
 642         for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 643                 if (info.memctl_opts[i].memctl_interleaving) {
 644                         switch (info.memctl_opts[i].memctl_interleaving_mode) {
 645                         case FSL_DDR_CACHE_LINE_INTERLEAVING:
 646                         case FSL_DDR_PAGE_INTERLEAVING:
 647                         case FSL_DDR_BANK_INTERLEAVING:
 648                         case FSL_DDR_SUPERBANK_INTERLEAVING:
 649                                 if (i == 0) {
 650                                         law_memctl = LAW_TRGT_IF_DDR_INTRLV;
 651                                         fsl_ddr_set_lawbar(&info.common_timing_params[i],
 652                                                 law_memctl, i);
 653                                 } else if (i == 2) {
 654                                         law_memctl = LAW_TRGT_IF_DDR_INTLV_34;
 655                                         fsl_ddr_set_lawbar(&info.common_timing_params[i],
 656                                                 law_memctl, i);
 657                                 }
 658                                 break;
 659                         case FSL_DDR_3WAY_1KB_INTERLEAVING:
 660                         case FSL_DDR_3WAY_4KB_INTERLEAVING:
 661                         case FSL_DDR_3WAY_8KB_INTERLEAVING:
 662                                 law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
 663                                 if (i == 0) {
 664                                         fsl_ddr_set_lawbar(&info.common_timing_params[i],
 665                                                 law_memctl, i);
 666                                 }
 667                                 break;
 668                         case FSL_DDR_4WAY_1KB_INTERLEAVING:
 669                         case FSL_DDR_4WAY_4KB_INTERLEAVING:
 670                         case FSL_DDR_4WAY_8KB_INTERLEAVING:
 671                                 law_memctl = LAW_TRGT_IF_DDR_INTLV_1234;
 672                                 if (i == 0)
 673                                         fsl_ddr_set_lawbar(&info.common_timing_params[i],
 674                                                 law_memctl, i);
 675                                 /* place holder for future 4-way interleaving */
 676                                 break;
 677                         default:
 678                                 break;
 679                         }
 680                 } else {
 681                         switch (i) {
 682                         case 0:
 683                                 law_memctl = LAW_TRGT_IF_DDR_1;
 684                                 break;
 685                         case 1:
 686                                 law_memctl = LAW_TRGT_IF_DDR_2;
 687                                 break;
 688                         case 2:
 689                                 law_memctl = LAW_TRGT_IF_DDR_3;
 690                                 break;
 691                         case 3:
 692                                 law_memctl = LAW_TRGT_IF_DDR_4;
 693                                 break;
 694                         default:
 695                                 break;
 696                         }
 697                         fsl_ddr_set_lawbar(&info.common_timing_params[i],
 698                                         law_memctl, i);
 699                 }
 700         }
 701 #endif
 702
 703         debug("total_memory by %s = %llu\n", __func__, total_memory);
 704
 705 #if !defined(CONFIG_PHYS_64BIT)
 706         /* Check for 4G or more.  Bad. */
 707         if (total_memory >= (1ull << 32)) {
 708                 puts("Detected ");
 709                 print_size(total_memory, " of memory\n");
 710                 printf("       This U-Boot only supports < 4G of DDR\n");
 711                 printf("       You could rebuild it with CONFIG_PHYS_64BIT\n");
 712                 printf("       "); /* re-align to match init_func_ram print */
 713                 total_memory = CONFIG_MAX_MEM_MAPPED;
 714         }
 715 #endif
 716
 717         return total_memory;
 718 }
 719
 720 /*
 721  * fsl_ddr_sdram_size() - This function only returns the size of the total
 722  * memory without setting ddr control registers.
 723  */
 724 phys_size_t
 725 fsl_ddr_sdram_size(void)
 726 {
 727         fsl_ddr_info_t  info;
 728         unsigned long long total_memory = 0;
 729
 730         memset(&info, 0 , sizeof(fsl_ddr_info_t));
 731
 732         /* Compute it once normally. */
 733         total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 1);
 734
 735         return total_memory;
 736 }