configs/vinco_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_ARCH_CPU_INIT=y
   4 CONFIG_ARCH_AT91=y
   5 CONFIG_TEXT_BASE=0x20f00000
   6 CONFIG_SYS_MALLOC_F_LEN=0x400
   7 CONFIG_TARGET_VINCO=y
   8 CONFIG_NR_DRAM_BANKS=1
   9 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
  10 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000f00
  11 CONFIG_SF_DEFAULT_SPEED=50000000
  12 CONFIG_ENV_SIZE=0x10000
  13 CONFIG_ENV_OFFSET=0x10000
  14 CONFIG_ENV_SECT_SIZE=0x1000
  15 CONFIG_DEFAULT_DEVICE_TREE="at91-vinco"
  16 CONFIG_SYS_LOAD_ADDR=0x22000000
  17 CONFIG_ENV_VARS_UBOOT_CONFIG=y
  18 CONFIG_SPI_BOOT=y
  19 CONFIG_BOOTDELAY=3
  20 CONFIG_USE_BOOTARGS=y
  21 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656"
  22 CONFIG_USE_BOOTCOMMAND=y
  23 CONFIG_BOOTCOMMAND="mmc dev 0 0;mmc read ${loadaddr} ${k_offset} ${k_blksize};mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};bootz ${loadaddr} -  ${oftaddr}"
  24 # CONFIG_DISPLAY_BOARDINFO is not set
  25 CONFIG_BOARD_EARLY_INIT_F=y
  26 CONFIG_HUSH_PARSER=y
  27 CONFIG_SYS_PROMPT="vinco => "
  28 CONFIG_SYS_CBSIZE=256
  29 CONFIG_SYS_PBSIZE=282
  30 CONFIG_CMD_BOOTZ=y
  31 # CONFIG_CMD_IMI is not set
  32 CONFIG_CMD_GPT=y
  33 # CONFIG_CMD_LOADS is not set
  34 CONFIG_CMD_MMC=y
  35 CONFIG_CMD_USB=y
  36 CONFIG_CMD_DHCP=y
  37 CONFIG_BOOTP_BOOTFILESIZE=y
  38 CONFIG_CMD_MII=y
  39 CONFIG_CMD_PING=y
  40 CONFIG_CMD_FAT=y
  41 CONFIG_OF_CONTROL=y
  42 CONFIG_ENV_IS_IN_SPI_FLASH=y
  43 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  44 CONFIG_NET_RETRY_COUNT=20
  45 CONFIG_AT91_GPIO=y
  46 CONFIG_SUPPORT_EMMC_BOOT=y
  47 CONFIG_GENERIC_ATMEL_MCI=y
  48 CONFIG_DM_SPI_FLASH=y
  49 CONFIG_SPI_FLASH_STMICRO=y
  50 CONFIG_PHY_SMSC=y
  51 CONFIG_ETH_DESIGNWARE=y
  52 CONFIG_MACB=y
  53 CONFIG_RMII=y
  54 CONFIG_ATMEL_USART=y
  55 CONFIG_SYSRESET=y
  56 CONFIG_SYSRESET_AT91=y
  57 CONFIG_USB=y
  58 CONFIG_USB_EHCI_HCD=y
  59 CONFIG_USB_HOST_ETHER=y
  60 CONFIG_USB_ETHER_SMSC95XX=y
  61 CONFIG_USB_GADGET=y
  62 CONFIG_USB_GADGET_MANUFACTURER="L+G VInCo"
  63 CONFIG_USB_GADGET_ATMEL_USBA=y
  64 CONFIG_USB_ETHER=y