configs/uniphier_ld4_sld8_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_UNIPHIER=y
   3 CONFIG_SYS_TEXT_BASE=0x84000000
   4 CONFIG_NR_DRAM_BANKS=3
   5 CONFIG_ENV_SIZE=0x2000
   6 CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld4-ref"
   7 CONFIG_SPL_TEXT_BASE=0x00040000
   8 CONFIG_SPL_MMC=y
   9 CONFIG_SPL_SERIAL=y
  10 CONFIG_SPL=y
  11 CONFIG_MICRO_SUPPORT_CARD=y
  12 CONFIG_SYS_LOAD_ADDR=0x85000000
  13 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
  14 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x84000000
  15 CONFIG_TIMESTAMP=y
  16 # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
  17 CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
  18 CONFIG_USE_PREBOOT=y
  19 CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot"
  20 CONFIG_LOGLEVEL=6
  21 CONFIG_SPL_MAX_SIZE=0x10000
  22 CONFIG_SPL_PAD_TO=0x20000
  23 CONFIG_SPL_BSS_MAX_SIZE=0x2000
  24 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
  25 CONFIG_SPL_STACK=0x100000
  26 CONFIG_SPL_NAND_SUPPORT=y
  27 CONFIG_SPL_NOR_SUPPORT=y
  28 CONFIG_SPL_TARGET="u-boot-with-spl.bin"
  29 CONFIG_CMD_CONFIG=y
  30 CONFIG_SYS_BOOTM_LEN=0x2000000
  31 # CONFIG_CMD_XIMG is not set
  32 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
  33 CONFIG_CMD_GPIO=y
  34 CONFIG_CMD_GPT=y
  35 CONFIG_CMD_I2C=y
  36 CONFIG_CMD_MMC=y
  37 CONFIG_CMD_USB=y
  38 CONFIG_CMD_TFTPPUT=y
  39 CONFIG_CMD_CACHE=y
  40 CONFIG_CMD_TIME=y
  41 # CONFIG_CMD_SLEEP is not set
  42 CONFIG_CMD_MTDPARTS=y
  43 CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
  44 CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
  45 CONFIG_CMD_UBI=y
  46 # CONFIG_SPL_DOS_PARTITION is not set
  47 # CONFIG_SPL_EFI_PARTITION is not set
  48 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  49 CONFIG_USE_BOOTFILE=y
  50 CONFIG_BOOTFILE="zImage"
  51 CONFIG_NET_RANDOM_ETHADDR=y
  52 CONFIG_GPIO_UNIPHIER=y
  53 CONFIG_MISC=y
  54 CONFIG_I2C_EEPROM=y
  55 CONFIG_SUPPORT_EMMC_BOOT=y
  56 CONFIG_MMC_UNIPHIER=y
  57 CONFIG_MTD=y
  58 CONFIG_MTD_RAW_NAND=y
  59 CONFIG_NAND_DENALI_DT=y
  60 CONFIG_SYS_NAND_ONFI_DETECTION=y
  61 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
  62 CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
  63 CONFIG_SPL_NAND_DENALI=y
  64 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
  65 CONFIG_SMC911X=y
  66 CONFIG_SMC911X_32_BIT=y
  67 CONFIG_USB=y
  68 CONFIG_USB_EHCI_HCD=y
  69 CONFIG_USB_EHCI_GENERIC=y
  70 CONFIG_PANIC_HANG=y
  71 CONFIG_FDT_FIXUP_PARTITIONS=y