configs/seaboard_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SYS_L2CACHE_OFF=y
   3 CONFIG_ARCH_TEGRA=y
   4 CONFIG_TEXT_BASE=0x00110000
   5 CONFIG_NR_DRAM_BANKS=2
   6 CONFIG_ENV_SIZE=0x2000
   7 CONFIG_ENV_OFFSET=0xFFFFE000
   8 CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard"
   9 CONFIG_SPL_TEXT_BASE=0x00108000
  10 CONFIG_SPL_STACK=0xffffc
  11 CONFIG_TEGRA20=y
  12 CONFIG_TARGET_SEABOARD=y
  13 CONFIG_TEGRA_ENABLE_UARTD=y
  14 CONFIG_SYS_LOAD_ADDR=0x1000000
  15 CONFIG_OF_SYSTEM_SETUP=y
  16 CONFIG_USE_PREBOOT=y
  17 CONFIG_SPL_FOOTPRINT_LIMIT=y
  18 CONFIG_SPL_MAX_FOOTPRINT=0x8000
  19 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
  20 CONFIG_SYS_SPL_MALLOC=y
  21 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
  22 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000
  23 CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
  24 CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # "
  25 CONFIG_SYS_MAXARGS=64
  26 CONFIG_SYS_PBSIZE=2086
  27 # CONFIG_CMD_IMI is not set
  28 # CONFIG_CMD_FLASH is not set
  29 CONFIG_CMD_GPIO=y
  30 CONFIG_CMD_I2C=y
  31 CONFIG_CMD_MMC=y
  32 CONFIG_CMD_USB=y
  33 # CONFIG_CMD_SETEXPR is not set
  34 CONFIG_CMD_PMIC=y
  35 CONFIG_CMD_REGULATOR=y
  36 CONFIG_CMD_EXT4_WRITE=y
  37 # CONFIG_SPL_DOS_PARTITION is not set
  38 # CONFIG_SPL_EFI_PARTITION is not set
  39 CONFIG_ENV_OVERWRITE=y
  40 CONFIG_ENV_IS_IN_MMC=y
  41 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  42 CONFIG_SYS_MMC_ENV_PART=2
  43 CONFIG_SPL_DM=y
  44 CONFIG_SYS_I2C_TEGRA=y
  45 CONFIG_TEGRA_KEYBOARD=y
  46 CONFIG_MTD=y
  47 CONFIG_MTD_RAW_NAND=y
  48 CONFIG_TEGRA_NAND=y
  49 CONFIG_SYS_NAND_ONFI_DETECTION=y
  50 CONFIG_DM_PMIC=y
  51 CONFIG_DM_REGULATOR=y
  52 CONFIG_DM_REGULATOR_FIXED=y
  53 CONFIG_TPS6586X_POWER=y
  54 CONFIG_PWM_TEGRA=y
  55 CONFIG_SYS_NS16550=y
  56 CONFIG_USB=y
  57 CONFIG_USB_EHCI_HCD=y
  58 CONFIG_USB_EHCI_TEGRA=y
  59 CONFIG_USB_ULPI_VIEWPORT=y
  60 CONFIG_USB_ULPI=y
  61 CONFIG_USB_KEYBOARD=y
  62 CONFIG_USB_HOST_ETHER=y
  63 CONFIG_USB_ETHER_ASIX=y
  64 CONFIG_VIDEO=y
  65 # CONFIG_VIDEO_BPP8 is not set
  66 CONFIG_VIDEO_TEGRA20=y
  67 CONFIG_CONSOLE_SCROLL_LINES=10