configs/sama5d36ek_cmp_mmc_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_ARCH_CPU_INIT=y
   4 CONFIG_ARCH_AT91=y
   5 CONFIG_SYS_TEXT_BASE=0x26f00000
   6 CONFIG_SYS_MALLOC_F_LEN=0x2000
   7 CONFIG_TARGET_SAMA5D3XEK=y
   8 CONFIG_NR_DRAM_BANKS=1
   9 CONFIG_ENV_SIZE=0x4000
  10 CONFIG_DM_GPIO=y
  11 CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek_cmp"
  12 CONFIG_DEBUG_UART_BOARD_INIT=y
  13 CONFIG_DEBUG_UART_BASE=0xffffee00
  14 CONFIG_DEBUG_UART_CLOCK=132000000
  15 CONFIG_DEBUG_UART=y
  16 CONFIG_ENV_VARS_UBOOT_CONFIG=y
  17 CONFIG_SYS_LOAD_ADDR=0x22000000
  18 CONFIG_FIT=y
  19 CONFIG_SD_BOOT=y
  20 CONFIG_BOOTDELAY=3
  21 CONFIG_USE_BOOTARGS=y
  22 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
  23 CONFIG_USE_BOOTCOMMAND=y
  24 CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000"
  25 # CONFIG_CONSOLE_MUX is not set
  26 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  27 # CONFIG_DISPLAY_BOARDINFO is not set
  28 CONFIG_HUSH_PARSER=y
  29 CONFIG_CMD_BOOTZ=y
  30 # CONFIG_CMD_IMI is not set
  31 # CONFIG_CMD_LOADS is not set
  32 CONFIG_CMD_MMC=y
  33 CONFIG_CMD_NAND=y
  34 CONFIG_CMD_NAND_TRIMFFS=y
  35 CONFIG_CMD_DHCP=y
  36 CONFIG_CMD_MII=y
  37 CONFIG_CMD_PING=y
  38 CONFIG_CMD_FAT=y
  39 CONFIG_OF_CONTROL=y
  40 CONFIG_ENV_IS_IN_FAT=y
  41 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  42 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
  43 CONFIG_DM=y
  44 CONFIG_CLK=y
  45 CONFIG_CLK_AT91=y
  46 CONFIG_AT91_H32MX=y
  47 CONFIG_AT91_GPIO=y
  48 CONFIG_GENERIC_ATMEL_MCI=y
  49 CONFIG_MTD=y
  50 CONFIG_MTD_RAW_NAND=y
  51 CONFIG_NAND_ATMEL=y
  52 CONFIG_ATMEL_NAND_HW_PMECC=y
  53 CONFIG_PMECC_CAP=4
  54 CONFIG_SYS_NAND_ONFI_DETECTION=y
  55 CONFIG_DM_SPI_FLASH=y
  56 CONFIG_SF_DEFAULT_SPEED=30000000
  57 CONFIG_SPI_FLASH_ATMEL=y
  58 CONFIG_DM_ETH=y
  59 CONFIG_MACB=y
  60 CONFIG_PINCTRL=y
  61 CONFIG_PINCTRL_AT91=y
  62 CONFIG_DM_SERIAL=y
  63 CONFIG_DEBUG_UART_ANNOUNCE=y
  64 CONFIG_ATMEL_USART=y
  65 CONFIG_SPI=y
  66 CONFIG_DM_SPI=y
  67 CONFIG_TIMER=y
  68 CONFIG_ATMEL_PIT_TIMER=y
  69 CONFIG_DM_VIDEO=y
  70 # CONFIG_VIDEO_BPP8 is not set
  71 # CONFIG_VIDEO_BPP32 is not set
  72 CONFIG_ATMEL_HLCD=y