configs/pm9g45_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_ARCH_AT91=y
   4 CONFIG_SYS_TEXT_BASE=0x73f00000
   5 CONFIG_SYS_MALLOC_LEN=0x80000
   6 CONFIG_SYS_MALLOC_F_LEN=0x2000
   7 CONFIG_TARGET_PM9G45=y
   8 CONFIG_ATMEL_LEGACY=y
   9 CONFIG_NR_DRAM_BANKS=1
  10 CONFIG_DM_GPIO=y
  11 CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
  12 CONFIG_DEBUG_UART_BASE=0xffffee00
  13 CONFIG_DEBUG_UART_CLOCK=132000000
  14 CONFIG_ENV_OFFSET_REDUND=0x100000
  15 CONFIG_DEBUG_UART=y
  16 CONFIG_SYS_LOAD_ADDR=0x22000000
  17 CONFIG_NAND_BOOT=y
  18 CONFIG_BOOTDELAY=3
  19 CONFIG_USE_BOOTARGS=y
  20 CONFIG_BOOTARGS="fbcon=rotate:3 console=tty0 console=ttyS0,115200 root=/dev/mtdblock4 mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,1664k(env),2M(linux)ro,-(root) rw rootfstype=jffs2"
  21 CONFIG_USE_BOOTCOMMAND=y
  22 CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
  23 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  24 # CONFIG_DISPLAY_BOARDINFO is not set
  25 CONFIG_HUSH_PARSER=y
  26 CONFIG_SYS_PROMPT="U-Boot> "
  27 # CONFIG_CMD_BDI is not set
  28 CONFIG_CMD_BOOTZ=y
  29 # CONFIG_CMD_IMI is not set
  30 # CONFIG_CMD_FLASH is not set
  31 # CONFIG_CMD_LOADS is not set
  32 CONFIG_CMD_MMC=y
  33 CONFIG_CMD_NAND=y
  34 CONFIG_CMD_USB=y
  35 # CONFIG_CMD_SETEXPR is not set
  36 CONFIG_CMD_DHCP=y
  37 CONFIG_BOOTP_BOOTFILESIZE=y
  38 CONFIG_CMD_MII=y
  39 CONFIG_CMD_PING=y
  40 CONFIG_CMD_FAT=y
  41 CONFIG_OF_CONTROL=y
  42 CONFIG_ENV_IS_IN_NAND=y
  43 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  44 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  45 CONFIG_NET_RANDOM_ETHADDR=y
  46 CONFIG_DM=y
  47 CONFIG_CLK=y
  48 CONFIG_CLK_AT91=y
  49 CONFIG_AT91_GPIO=y
  50 CONFIG_GENERIC_ATMEL_MCI=y
  51 CONFIG_MTD=y
  52 CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT=y
  53 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
  54 CONFIG_NAND_ATMEL=y
  55 CONFIG_DM_ETH=y
  56 CONFIG_MACB=y
  57 CONFIG_PINCTRL=y
  58 CONFIG_PINCTRL_AT91=y
  59 CONFIG_DM_SERIAL=y
  60 CONFIG_DEBUG_UART_ANNOUNCE=y
  61 CONFIG_ATMEL_USART=y
  62 CONFIG_TIMER=y
  63 CONFIG_ATMEL_PIT_TIMER=y
  64 CONFIG_USB=y
  65 CONFIG_USB_EHCI_HCD=y
  66 CONFIG_USB_STORAGE=y