configs/phycore_pcl063_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_MX6=y
   3 CONFIG_TEXT_BASE=0x87800000
   4 CONFIG_SYS_MALLOC_LEN=0x1000000
   5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   7 CONFIG_NR_DRAM_BANKS=8
   8 CONFIG_ENV_SIZE=0x4000
   9 CONFIG_MX6UL=y
  10 CONFIG_TARGET_PCL063=y
  11 CONFIG_DEFAULT_DEVICE_TREE="imx6ul-phytec-segin-ff-rdk-nand"
  12 CONFIG_SPL_TEXT_BASE=0x00909000
  13 CONFIG_SPL_MMC=y
  14 CONFIG_SPL_SERIAL=y
  15 CONFIG_SPL=y
  16 CONFIG_SYS_MEMTEST_START=0x80000000
  17 CONFIG_SYS_MEMTEST_END=0x90000000
  18 CONFIG_DISTRO_DEFAULTS=y
  19 CONFIG_SYS_MONITOR_LEN=409600
  20 CONFIG_BOOTDELAY=3
  21 CONFIG_BOARD_EARLY_INIT_F=y
  22 CONFIG_SYS_SPL_MALLOC=y
  23 CONFIG_SPL_USB_HOST=y
  24 CONFIG_SPL_WATCHDOG=y
  25 CONFIG_SYS_MAXARGS=32
  26 CONFIG_SYS_PBSIZE=532
  27 CONFIG_CMD_MEMTEST=y
  28 CONFIG_CMD_DM=y
  29 CONFIG_CMD_GPIO=y
  30 CONFIG_CMD_GPT=y
  31 # CONFIG_RANDOM_UUID is not set
  32 CONFIG_CMD_I2C=y
  33 CONFIG_CMD_MMC=y
  34 CONFIG_CMD_MTD=y
  35 CONFIG_CMD_USB=y
  36 CONFIG_CMD_USB_SDP=y
  37 CONFIG_CMD_CACHE=y
  38 CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
  39 CONFIG_MTDPARTS_DEFAULT="gpmi-nand:4m(uboot),1m(env),-(root)"
  40 CONFIG_CMD_UBI=y
  41 # CONFIG_ISO_PARTITION is not set
  42 CONFIG_OF_CONTROL=y
  43 CONFIG_ENV_OVERWRITE=y
  44 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  45 CONFIG_DM_I2C_GPIO=y
  46 CONFIG_SYS_I2C_MXC=y
  47 CONFIG_FSL_USDHC=y
  48 CONFIG_MTD=y
  49 CONFIG_DM_MTD=y
  50 CONFIG_MTD_RAW_NAND=y
  51 CONFIG_NAND_MXS=y
  52 CONFIG_NAND_MXS_DT=y
  53 CONFIG_PHYLIB=y
  54 CONFIG_PHY_MICREL=y
  55 CONFIG_PHY_MICREL_KSZ8XXX=y
  56 CONFIG_FEC_MXC=y
  57 CONFIG_MII=y
  58 CONFIG_PINCTRL=y
  59 CONFIG_PINCTRL_IMX6=y
  60 CONFIG_DM_PMIC=y
  61 CONFIG_DM_REGULATOR=y
  62 CONFIG_DM_REGULATOR_FIXED=y
  63 CONFIG_MXC_UART=y
  64 CONFIG_IMX_THERMAL=y
  65 CONFIG_USB=y
  66 CONFIG_USB_GADGET=y
  67 CONFIG_USB_GADGET_MANUFACTURER="Phytec"
  68 CONFIG_USB_GADGET_VENDOR_NUM=0x01b67
  69 CONFIG_USB_GADGET_PRODUCT_NUM=0x4fff
  70 CONFIG_CI_UDC=y
  71 CONFIG_USB_GADGET_DOWNLOAD=y