configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_COUNTER_FREQUENCY=25000000
   3 CONFIG_TARGET_LS1046ARDB=y
   4 CONFIG_SYS_TEXT_BASE=0x82000000
   5 CONFIG_SYS_MALLOC_LEN=0x102000
   6 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   7 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   8 CONFIG_NR_DRAM_BANKS=2
   9 CONFIG_ENV_SIZE=0x2000
  10 CONFIG_NXP_ESBC=y
  11 CONFIG_SYS_I2C_MXC_I2C1=y
  12 CONFIG_SYS_I2C_MXC_I2C2=y
  13 CONFIG_SYS_I2C_MXC_I2C3=y
  14 CONFIG_SYS_I2C_MXC_I2C4=y
  15 CONFIG_DM_GPIO=y
  16 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb"
  17 CONFIG_SPL_TEXT_BASE=0x10000000
  18 CONFIG_FSL_LS_PPA=y
  19 CONFIG_SPL_MMC=y
  20 CONFIG_SPL_SERIAL=y
  21 CONFIG_SPL_DRIVERS_MISC=y
  22 CONFIG_SPL=y
  23 CONFIG_DISTRO_DEFAULTS=y
  24 CONFIG_REMAKE_ELF=y
  25 CONFIG_MP=y
  26 CONFIG_FIT_VERBOSE=y
  27 CONFIG_OF_BOARD_SETUP=y
  28 CONFIG_RAMBOOT_PBL=y
  29 CONFIG_SYS_FSL_PBL_PBI="board/freescale/ls1046ardb/ls1046ardb_pbi.cfg"
  30 CONFIG_SYS_FSL_PBL_RCW="board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg"
  31 CONFIG_SD_BOOT=y
  32 CONFIG_BOOTDELAY=10
  33 CONFIG_USE_BOOTARGS=y
  34 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
  35 CONFIG_BOOTCOMMAND="run distro_bootcmd;run sd_bootcmd; env exists secureboot && esbc_halt;"
  36 CONFIG_MISC_INIT_R=y
  37 CONFIG_SPL_MAX_SIZE=0x1f000
  38 CONFIG_SPL_PAD_TO=0x21000
  39 CONFIG_SPL_BSS_MAX_SIZE=0x80000
  40 CONFIG_SPL_FSL_PBL=y
  41 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
  42 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
  43 CONFIG_SPL_ENV_SUPPORT=y
  44 CONFIG_SPL_I2C=y
  45 CONFIG_SPL_MPC8XXX_INIT_DDR=y
  46 CONFIG_SPL_WATCHDOG=y
  47 CONFIG_SYS_MAXARGS=64
  48 CONFIG_SYS_PBSIZE=532
  49 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
  50 CONFIG_CMD_DM=y
  51 CONFIG_CMD_GPIO=y
  52 CONFIG_CMD_GPT=y
  53 CONFIG_CMD_I2C=y
  54 CONFIG_CMD_MMC=y
  55 CONFIG_CMD_NAND=y
  56 CONFIG_CMD_PCI=y
  57 CONFIG_CMD_USB=y
  58 CONFIG_CMD_CACHE=y
  59 CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
  60 # CONFIG_SPL_EFI_PARTITION is not set
  61 CONFIG_OF_CONTROL=y
  62 CONFIG_SPL_OF_CONTROL=y
  63 CONFIG_ENV_OVERWRITE=y
  64 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  65 CONFIG_USE_ETHPRIME=y
  66 CONFIG_ETHPRIME="FM1@DTSEC3"
  67 CONFIG_DM=y
  68 CONFIG_SPL_DM=y
  69 # CONFIG_SPL_BLK is not set
  70 CONFIG_DDR_ECC=y
  71 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
  72 CONFIG_MPC8XXX_GPIO=y
  73 CONFIG_DM_I2C=y
  74 # CONFIG_SPL_DM_I2C is not set
  75 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  76 CONFIG_SYS_I2C_EEPROM_ADDR=0x53
  77 # CONFIG_SPL_DM_MMC is not set
  78 CONFIG_FSL_ESDHC=y
  79 CONFIG_MTD=y
  80 CONFIG_MTD_RAW_NAND=y
  81 CONFIG_NAND_FSL_IFC=y
  82 CONFIG_SYS_NAND_ONFI_DETECTION=y
  83 # CONFIG_SPI_FLASH_BAR is not set
  84 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
  85 CONFIG_PHYLIB=y
  86 CONFIG_PHY_AQUANTIA=y
  87 CONFIG_PHY_REALTEK=y
  88 CONFIG_PHY_FIXED=y
  89 CONFIG_DM_ETH=y
  90 CONFIG_DM_MDIO=y
  91 CONFIG_E1000=y
  92 CONFIG_FMAN_ENET=y
  93 CONFIG_SYS_FMAN_FW_ADDR=0x900000
  94 CONFIG_PCI=y
  95 CONFIG_PCIE_LAYERSCAPE_RC=y
  96 CONFIG_PCIE_LAYERSCAPE_EP=y
  97 CONFIG_POWER_LEGACY=y
  98 CONFIG_POWER_I2C=y
  99 CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
 100 CONFIG_SCSI_AHCI_PLAT=y
 101 CONFIG_SYS_NS16550=y
 102 CONFIG_SPI=y
 103 CONFIG_DM_SPI=y
 104 CONFIG_FSL_QSPI=y
 105 CONFIG_USB=y
 106 CONFIG_USB_XHCI_HCD=y
 107 CONFIG_USB_XHCI_DWC3=y
 108 CONFIG_RSA=y
 109 CONFIG_SPL_RSA=y
 110 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y