configs/ls1046aqds_lpuart_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_TARGET_LS1046AQDS=y
   3 CONFIG_SYS_TEXT_BASE=0x60100000
   4 CONFIG_SYS_MALLOC_LEN=0x120000
   5 CONFIG_NR_DRAM_BANKS=2
   6 CONFIG_SYS_MEMTEST_START=0x80000000
   7 CONFIG_SYS_MEMTEST_END=0x9fffffff
   8 CONFIG_ENV_SIZE=0x20000
   9 CONFIG_ENV_SECT_SIZE=0x20000
  10 CONFIG_SYS_I2C_MXC_I2C1=y
  11 CONFIG_SYS_I2C_MXC_I2C2=y
  12 CONFIG_SYS_I2C_MXC_I2C3=y
  13 CONFIG_SYS_I2C_MXC_I2C4=y
  14 CONFIG_DM_GPIO=y
  15 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-lpuart"
  16 CONFIG_FSL_USE_PCA9547_MUX=y
  17 CONFIG_VID=y
  18 CONFIG_VID_FLS_ENV="ls1046aqds_vdd_mv"
  19 CONFIG_VOL_MONITOR_INA220=y
  20 CONFIG_VOL_MONITOR_IR36021_SET=y
  21 CONFIG_FSL_LS_PPA=y
  22 CONFIG_AHCI=y
  23 CONFIG_DISTRO_DEFAULTS=y
  24 CONFIG_FIT_VERBOSE=y
  25 CONFIG_OF_BOARD_SETUP=y
  26 CONFIG_SYS_EXTRA_OPTIONS="LPUART"
  27 CONFIG_DYNAMIC_SYS_CLK_FREQ=y
  28 CONFIG_BOOTDELAY=10
  29 CONFIG_USE_BOOTARGS=y
  30 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
  31 CONFIG_BOOTCOMMAND="run distro_bootcmd; run nor_bootcmd; env exists secureboot && esbc_halt;;"
  32 CONFIG_MISC_INIT_R=y
  33 CONFIG_CMD_BOOTZ=y
  34 CONFIG_CMD_IMLS=y
  35 CONFIG_CMD_GREPENV=y
  36 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
  37 CONFIG_CMD_MEMINFO=y
  38 CONFIG_CMD_MEMTEST=y
  39 CONFIG_CMD_GPIO=y
  40 CONFIG_CMD_GPT=y
  41 CONFIG_CMD_I2C=y
  42 CONFIG_CMD_MMC=y
  43 CONFIG_CMD_NAND=y
  44 CONFIG_CMD_PCI=y
  45 CONFIG_CMD_USB=y
  46 CONFIG_CMD_CACHE=y
  47 CONFIG_MP=y
  48 CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m@0x100000(nor_bank0_uboot),40m@0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m@0x4100000(nor_bank4_uboot),40m@0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:4m(nand_uboot),36m(nand_kernel),472m(nand_free);spi0.0:2m(uboot),14m(free)"
  49 CONFIG_OF_CONTROL=y
  50 CONFIG_ENV_OVERWRITE=y
  51 CONFIG_ENV_IS_IN_FLASH=y
  52 CONFIG_ENV_ADDR=0x60300000
  53 CONFIG_DM=y
  54 CONFIG_SATA_CEVA=y
  55 CONFIG_FSL_CAAM=y
  56 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
  57 CONFIG_DDR_ECC=y
  58 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
  59 CONFIG_MPC8XXX_GPIO=y
  60 CONFIG_DM_I2C=y
  61 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  62 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
  63 CONFIG_FSL_ESDHC=y
  64 CONFIG_MTD=y
  65 CONFIG_MTD_NOR_FLASH=y
  66 CONFIG_FLASH_CFI_DRIVER=y
  67 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
  68 CONFIG_SYS_FLASH_CFI=y
  69 CONFIG_SYS_MAX_FLASH_BANKS=2
  70 CONFIG_MTD_RAW_NAND=y
  71 CONFIG_NAND_FSL_IFC=y
  72 CONFIG_SYS_NAND_ONFI_DETECTION=y
  73 CONFIG_SF_DEFAULT_BUS=1
  74 CONFIG_SPI_FLASH_EON=y
  75 CONFIG_SPI_FLASH_STMICRO=y
  76 CONFIG_SPI_FLASH_SST=y
  77 CONFIG_PHYLIB=y
  78 CONFIG_PHYLIB_10G=y
  79 CONFIG_PHY_REALTEK=y
  80 CONFIG_PHY_VITESSE=y
  81 CONFIG_E1000=y
  82 CONFIG_FMAN_ENET=y
  83 CONFIG_SYS_FMAN_FW_ADDR=0x60900000
  84 CONFIG_NVME=y
  85 CONFIG_PCI=y
  86 CONFIG_DM_PCI_COMPAT=y
  87 CONFIG_PCIE_LAYERSCAPE_RC=y
  88 CONFIG_PCIE_LAYERSCAPE_EP=y
  89 CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
  90 CONFIG_DM_SCSI=y
  91 CONFIG_DM_SERIAL=y
  92 CONFIG_FSL_LPUART=y
  93 CONFIG_SPI=y
  94 CONFIG_DM_SPI=y
  95 CONFIG_FSL_DSPI=y
  96 CONFIG_USB=y
  97 CONFIG_USB_XHCI_HCD=y
  98 CONFIG_USB_XHCI_DWC3=y