configs/ls1021aqds_ddr4_nor_lpuart_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_TARGET_LS1021AQDS=y
   3 CONFIG_SYS_TEXT_BASE=0x60100000
   4 CONFIG_NR_DRAM_BANKS=1
   5 CONFIG_SYS_MEMTEST_START=0x80000000
   6 CONFIG_SYS_MEMTEST_END=0x9fffffff
   7 CONFIG_ENV_SIZE=0x2000
   8 CONFIG_ENV_SECT_SIZE=0x20000
   9 CONFIG_DM_GPIO=y
  10 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
  11 CONFIG_FSL_USE_PCA9547_MUX=y
  12 CONFIG_AHCI=y
  13 CONFIG_FIT=y
  14 CONFIG_FIT_VERBOSE=y
  15 CONFIG_OF_BOARD_SETUP=y
  16 CONFIG_OF_STDOUT_VIA_ALIAS=y
  17 CONFIG_SYS_EXTRA_OPTIONS="LPUART"
  18 CONFIG_BOOTDELAY=3
  19 CONFIG_SILENT_CONSOLE=y
  20 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  21 CONFIG_MISC_INIT_R=y
  22 CONFIG_ID_EEPROM=y
  23 CONFIG_HUSH_PARSER=y
  24 CONFIG_CMD_BOOTZ=y
  25 CONFIG_CMD_IMLS=y
  26 CONFIG_CMD_GREPENV=y
  27 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
  28 CONFIG_CMD_MEMINFO=y
  29 CONFIG_CMD_MEMTEST=y
  30 CONFIG_CMD_GPIO=y
  31 CONFIG_CMD_GPT=y
  32 CONFIG_CMD_I2C=y
  33 CONFIG_CMD_MMC=y
  34 CONFIG_CMD_NAND=y
  35 CONFIG_CMD_USB=y
  36 # CONFIG_CMD_SETEXPR is not set
  37 CONFIG_CMD_DHCP=y
  38 CONFIG_CMD_MII=y
  39 CONFIG_CMD_PING=y
  40 CONFIG_CMD_EXT2=y
  41 CONFIG_CMD_FAT=y
  42 CONFIG_OF_CONTROL=y
  43 CONFIG_ENV_OVERWRITE=y
  44 CONFIG_ENV_IS_IN_FLASH=y
  45 CONFIG_ENV_ADDR=0x60300000
  46 CONFIG_DM=y
  47 CONFIG_SATA_CEVA=y
  48 CONFIG_FSL_CAAM=y
  49 CONFIG_DM_I2C=y
  50 CONFIG_SPL_SYS_I2C_LEGACY=y
  51 CONFIG_SYS_I2C_EEPROM_ADDR=0x57
  52 CONFIG_FSL_ESDHC=y
  53 CONFIG_MTD=y
  54 CONFIG_MTD_NOR_FLASH=y
  55 CONFIG_FLASH_CFI_DRIVER=y
  56 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
  57 CONFIG_SYS_FLASH_CFI=y
  58 CONFIG_MTD_RAW_NAND=y
  59 CONFIG_PHY_REALTEK=y
  60 CONFIG_PHY_GIGE=y
  61 CONFIG_E1000=y
  62 CONFIG_MII=y
  63 CONFIG_TSEC_ENET=y
  64 CONFIG_NVME=y
  65 CONFIG_PCI=y
  66 CONFIG_DM_PCI_COMPAT=y
  67 CONFIG_PCIE_LAYERSCAPE_RC=y
  68 CONFIG_DM_SCSI=y
  69 CONFIG_DM_SERIAL=y
  70 CONFIG_FSL_LPUART=y
  71 CONFIG_USB=y
  72 CONFIG_USB_XHCI_HCD=y
  73 CONFIG_USB_XHCI_DWC3=y
  74 CONFIG_USB_STORAGE=y