configs/kontron_sl28_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_COUNTER_FREQUENCY=25000000
   3 CONFIG_TARGET_SL28=y
   4 CONFIG_SYS_MALLOC_LEN=0x202000
   5 CONFIG_SYS_MALLOC_F_LEN=0x4000
   6 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   7 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   8 CONFIG_NR_DRAM_BANKS=2
   9 CONFIG_ENV_SIZE=0x2000
  10 CONFIG_ENV_OFFSET=0x3e0000
  11 CONFIG_ENV_SECT_SIZE=0x10000
  12 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-kontron-sl28"
  13 CONFIG_SPL_TEXT_BASE=0x18010000
  14 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
  15 CONFIG_SPL_SERIAL=y
  16 CONFIG_SPL_SIZE_LIMIT=0x20000
  17 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0
  18 CONFIG_SPL=y
  19 CONFIG_ENV_OFFSET_REDUND=0x3f0000
  20 CONFIG_SPL_SPI_FLASH_SUPPORT=y
  21 CONFIG_SPL_SPI=y
  22 # CONFIG_PSCI_RESET is not set
  23 CONFIG_ARMV8_PSCI=y
  24 CONFIG_ARMV8_PSCI_RELOCATE=y
  25 CONFIG_SYS_LOAD_ADDR=0x82000000
  26 CONFIG_AHCI=y
  27 CONFIG_DISTRO_DEFAULTS=y
  28 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
  29 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800eff0
  30 CONFIG_MP=y
  31 CONFIG_FIT=y
  32 CONFIG_SPL_LOAD_FIT=y
  33 # CONFIG_USE_SPL_FIT_GENERATOR is not set
  34 CONFIG_OF_BOARD_SETUP=y
  35 CONFIG_OF_STDOUT_VIA_ALIAS=y
  36 CONFIG_BOOTDELAY=10
  37 CONFIG_USE_BOOTARGS=y
  38 CONFIG_BOARD_LATE_INIT=y
  39 CONFIG_PCI_INIT_R=y
  40 CONFIG_SPL_MAX_SIZE=0x20000
  41 CONFIG_SPL_BSS_MAX_SIZE=0x100000
  42 CONFIG_SPL_BOARD_INIT=y
  43 CONFIG_SPL_MPC8XXX_INIT_DDR=y
  44 CONFIG_SPL_SPI_LOAD=y
  45 CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000
  46 CONFIG_SYS_CBSIZE=256
  47 CONFIG_SYS_PBSIZE=276
  48 CONFIG_CMD_ASKENV=y
  49 CONFIG_CMD_GREPENV=y
  50 CONFIG_CMD_NVEDIT_EFI=y
  51 CONFIG_CMD_DFU=y
  52 CONFIG_CMD_DM=y
  53 CONFIG_CMD_GPIO=y
  54 CONFIG_CMD_GPT=y
  55 CONFIG_CMD_I2C=y
  56 CONFIG_CMD_MMC=y
  57 CONFIG_CMD_PCI=y
  58 CONFIG_CMD_USB=y
  59 CONFIG_CMD_USB_MASS_STORAGE=y
  60 CONFIG_CMD_WDT=y
  61 CONFIG_CMD_CACHE=y
  62 CONFIG_CMD_EFIDEBUG=y
  63 CONFIG_CMD_RNG=y
  64 CONFIG_OF_CONTROL=y
  65 CONFIG_SPL_OF_CONTROL=y
  66 CONFIG_OF_LIST="fsl-ls1028a-kontron-sl28 fsl-ls1028a-kontron-sl28-var1 fsl-ls1028a-kontron-sl28-var2 fsl-ls1028a-kontron-sl28-var3 fsl-ls1028a-kontron-sl28-var4"
  67 CONFIG_ENV_OVERWRITE=y
  68 CONFIG_ENV_IS_IN_SPI_FLASH=y
  69 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  70 CONFIG_SYS_RX_ETH_BUFFER=8
  71 CONFIG_SPL_DM_SEQ_ALIAS=y
  72 CONFIG_SATA=y
  73 CONFIG_SCSI_AHCI=y
  74 CONFIG_SATA_CEVA=y
  75 CONFIG_FSL_CAAM=y
  76 CONFIG_SYS_FSL_DDR3=y
  77 CONFIG_DDR_ECC=y
  78 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
  79 CONFIG_DFU_MMC=y
  80 CONFIG_DFU_SF=y
  81 CONFIG_SL28CPLD_GPIO=y
  82 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  83 CONFIG_I2C_MUX=y
  84 CONFIG_SL28CPLD=y
  85 CONFIG_MMC_HS400_SUPPORT=y
  86 CONFIG_FSL_ESDHC=y
  87 CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y
  88 # CONFIG_SPI_FLASH_UNLOCK_ALL is not set
  89 CONFIG_SPI_FLASH_WINBOND=y
  90 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
  91 CONFIG_PHYLIB=y
  92 CONFIG_PHY_ATHEROS=y
  93 CONFIG_PHY_FIXED=y
  94 CONFIG_DM_DSA=y
  95 CONFIG_PHY_GIGE=y
  96 CONFIG_E1000=y
  97 CONFIG_MSCC_FELIX_SWITCH=y
  98 CONFIG_NVME_PCI=y
  99 CONFIG_PCIE_ECAM_GENERIC=y
 100 CONFIG_PCIE_LAYERSCAPE_RC=y
 101 CONFIG_RTC_RV8803=y
 102 CONFIG_SCSI=y
 103 CONFIG_SYS_NS16550=y
 104 CONFIG_SPI=y
 105 CONFIG_FSL_DSPI=y
 106 CONFIG_NXP_FSPI=y
 107 CONFIG_USB=y
 108 # CONFIG_SPL_DM_USB is not set
 109 CONFIG_DM_USB_GADGET=y
 110 CONFIG_USB_XHCI_HCD=y
 111 # CONFIG_USB_XHCI_FSL is not set
 112 CONFIG_USB_DWC3=y
 113 CONFIG_USB_DWC3_LAYERSCAPE=y
 114 CONFIG_USB_GADGET=y
 115 CONFIG_USB_GADGET_DOWNLOAD=y
 116 # CONFIG_WATCHDOG is not set
 117 # CONFIG_WATCHDOG_AUTOSTART is not set
 118 CONFIG_WDT=y
 119 CONFIG_WDT_SL28CPLD=y
 120 CONFIG_WDT_SP805=y
 121 CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
 122 CONFIG_OF_LIBFDT_OVERLAY=y
 123 CONFIG_EFI_SET_TIME=y
 124 CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
 125 CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y