configs/corvus_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
   3 CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
   4 CONFIG_SYS_THUMB_BUILD=y
   5 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
   6 # CONFIG_SPL_USE_ARCH_MEMSET is not set
   7 CONFIG_ARCH_AT91=y
   8 CONFIG_TEXT_BASE=0x72000000
   9 CONFIG_SYS_MALLOC_LEN=0x460000
  10 CONFIG_SYS_MALLOC_F_LEN=0x800
  11 CONFIG_TARGET_CORVUS=y
  12 CONFIG_AT91_GPIO_PULLUP=y
  13 CONFIG_ATMEL_LEGACY=y
  14 CONFIG_SPL_GPIO=y
  15 CONFIG_SPL_LIBCOMMON_SUPPORT=y
  16 CONFIG_SPL_LIBGENERIC_SUPPORT=y
  17 CONFIG_NR_DRAM_BANKS=1
  18 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
  19 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70007f00
  20 CONFIG_ENV_OFFSET=0x100000
  21 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
  22 CONFIG_SPL_TEXT_BASE=0x300000
  23 CONFIG_SPL_SERIAL=y
  24 CONFIG_SPL_STACK=0x4000
  25 CONFIG_SPL=y
  26 CONFIG_ENV_OFFSET_REDUND=0x180000
  27 CONFIG_SYS_LOAD_ADDR=0x70000000
  28 CONFIG_NAND_BOOT=y
  29 CONFIG_BOOTDELAY=3
  30 CONFIG_USE_BOOTARGS=y
  31 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
  32 CONFIG_USE_BOOTCOMMAND=y
  33 CONFIG_BOOTCOMMAND="nand read 0x70000000 0x200000 0x300000;bootm 0x70000000"
  34 # CONFIG_DISPLAY_BOARDINFO is not set
  35 CONFIG_BOARD_EARLY_INIT_F=y
  36 CONFIG_SPL_MAX_SIZE=0x3000
  37 CONFIG_SPL_PAD_TO=0x20000
  38 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
  39 CONFIG_SPL_BSS_START_ADDR=0x3000
  40 CONFIG_SPL_BSS_MAX_SIZE=0x800
  41 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
  42 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
  43 CONFIG_SPL_NAND_SUPPORT=y
  44 CONFIG_SPL_NAND_RAW_ONLY=y
  45 CONFIG_SPL_NAND_DRIVERS=y
  46 CONFIG_SPL_NAND_ECC=y
  47 CONFIG_SPL_NAND_SOFTECC=y
  48 CONFIG_SPL_NAND_BASE=y
  49 CONFIG_HUSH_PARSER=y
  50 CONFIG_SYS_PROMPT="U-Boot> "
  51 CONFIG_SYS_CBSIZE=256
  52 CONFIG_SYS_PBSIZE=281
  53 # CONFIG_CMD_BDI is not set
  54 CONFIG_CMD_BOOTZ=y
  55 # CONFIG_CMD_IMI is not set
  56 CONFIG_CMD_DFU=y
  57 CONFIG_CMD_GPIO=y
  58 # CONFIG_CMD_LOADS is not set
  59 CONFIG_CMD_NAND=y
  60 CONFIG_CMD_USB=y
  61 # CONFIG_CMD_SOURCE is not set
  62 # CONFIG_CMD_SETEXPR is not set
  63 CONFIG_CMD_DHCP=y
  64 CONFIG_BOOTP_BOOTFILESIZE=y
  65 CONFIG_CMD_PING=y
  66 CONFIG_CMD_MTDPARTS=y
  67 CONFIG_DOS_PARTITION=y
  68 CONFIG_OF_CONTROL=y
  69 CONFIG_ENV_IS_IN_NAND=y
  70 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  71 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  72 CONFIG_NET_RETRY_COUNT=20
  73 CONFIG_CLK=y
  74 CONFIG_CLK_AT91=y
  75 CONFIG_DFU_NAND=y
  76 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
  77 CONFIG_AT91_GPIO=y
  78 # CONFIG_MMC is not set
  79 CONFIG_MTD=y
  80 CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT=y
  81 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
  82 CONFIG_NAND_ATMEL=y
  83 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
  84 CONFIG_SYS_NAND_PAGE_COUNT=0x40
  85 CONFIG_SYS_NAND_PAGE_SIZE=0x800
  86 CONFIG_SYS_NAND_OOBSIZE=0x40
  87 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
  88 CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
  89 CONFIG_MACB=y
  90 CONFIG_RMII=y
  91 CONFIG_ATMEL_USART=y
  92 CONFIG_USB=y
  93 CONFIG_USB_EHCI_HCD=y
  94 CONFIG_USB_GADGET=y
  95 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
  96 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
  97 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
  98 CONFIG_USB_GADGET_ATMEL_USBA=y
  99 CONFIG_USB_GADGET_DOWNLOAD=y